Too far from exchange?

We live in Wantirna South, Melbourne, and for several years now have been using Mobile Broadband for our internet because we've been continually told that we're too far from the exchange to get ADSL broadband. Our neighbours however, have ADSL broadband. Really at a loss at how to get better (and cheaper) internet to our residence. Any help? From adsl2exchanges.com.au: Line of Sight: 2577 m
Estimated Cable: 3221 m
Estimated Attenuation: 45
Estimated Maximum Speed: 5666

If you keep getting told you are unable to have ADSL the chances are it is truthfully that you are unable to have ADSL, although the distance might not be the only reason at play... it is possible that you are within the capable distance however other factors like noise or signal loss are a factor in the reasoning...
You could however request a connection again, each time it is done it goes to Telstra wholesale who then check to see if it is able to be done. If you do it again, and still have no luck you could raise a complaint with Telstra and they will be able to look into it and provide the exact details for why it was unable to be done (if it is still unable to be done) or be able to get it sorted if it is able to be done....

Similar Messages

Recorded sound with mic too far from subject in a larger room. Small echo challenge solvable?

I recorded my actor speaking from a mic that was a little bit too far and in a room that gave a small slightly noticeable echo. Is there anything I can do in Audition CS6 to reduce this "large room" ambiance and give my audio a more professional sound?
Adobe Audition CS6
thank you,
Robert

Nothing in Audition, no. You could try Zynaptiq's UNVEIL, but as with all of these tools, the results vary from a slight improvement to completely useless. Because the components of the reverberation are essentially of the same frequencies that you want to keep, anything you do at all, regardless of how complex the algorithm, is going to compromise the original signal. They don't even work very well on genuine reverb, where the original stimulus has stopped. I tried UNVEIL on a nice clean 5 second reverb, and ended up with... a five second reverb. There are rumours that it works better on less reverb - but you'll have to try it and see. It appears to contain a subtle masking system of some description, although on the website the description of what it does, like all so-called 'technical descriptions', is only really intended to mislead you.

Headset too far from base unit

My wife recently moved her office into an attic room in the house and her Plantronics headset no longer links with the Diverse 3010 base unit, which is where the phone line comes into the house downstairs. In fact the walk-about phone works fine, but just not the headset.
What are my options? Would a new phone provide a stronger signal? Or do I need to get the phone line rerouted? Any other options?
Thanks
Ben

You may have to move the base unit nearer to the office, although you can get a diverse repeater seen here but they are not cheap.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

I'm so far from my local exchange...

Hi... so i'm sooo far from my exchange ( telephone exchange ), 2 miles, infact.
In away, my local exchange is Southall but fibre optic got installed their and I checked the broadband checker and it said I still can't get it, only Total Broadband only. Then I checked a building right next to the exchange, WAHAY! They get 17.5 mbps just from adsl and get fibre... Lucky.
I live 2 miles away and get only 3.5 mbps, ( WHICH IS NOTHING, I KNOW ) and I can't get fibre optic but I'm too far from the exchange.
So basically, I will always have slow broadband and no fibre unless a new telephone exchange is built or if i Move house. Depressing. Help.

fibre comes to your local green street cabinet then copper to your home as now if your exchange has been upgraded the it is a matter of waiting for your cabinet to be upgraded it does not need a new exchange to be built
if you try the following we may be able to offer yo more advice on if your speed can be improved
Here are some help pages done by CL Keith http://www.btinternet.com/~cbeddoe/speed/Speed.html
also post your full hub stats details shown in this link http://www.btinternet.com/~cbeddoe/others/adslstats.html
Can you also post the full results fromBT Speedtest speedtester.bt.com
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Infinity direct from Exchange

Hi
My exchange Brundall EABRU has recently gone live on FTTC but I still cannot order Infinity.
I noticed in the Infinity FAQ that you sometimes cannot get Infinity if your line comes directly from the exchange and fear I fall into that category as my house is 400m from the exchange.
What if anything does BT plan to do to get Infinity or a high speed equivalent to properties fed direct from exchanges.
I saw a mention of something quicker than ADSL 2+ in one posting but can't find it.

At the moment Exchange Only (EO) lines can only support Adsl Broadband (ie ADSLMax which is upto 8mbps or ADSL2+ which is upto 20mb) unless your exchange is FTTP/H ready (Fibre to the Premises/Home)
Unfortunatly most EO lines are currently unable to have fibre broadband such as BT Infinity (FTTC Version) due to your line not connecting to a cabinet which would allow FTTC.
Also BT Retail (a communication provider/ISP who operates this forum) does not have much say as to when and if you will be able to get FTTC or FTTP/H based broadband such as BT Infinity.
The rollout of fibre broadband (FTTC or FTTP/H) is being planned, managed and done by Openreach for all communication provider/ISP. BT Retail (a communication provider/ISP) has nothing to do with the rollout and planning of fibre broadband.
Openreach plan to upgrade EO lines in the future to allow access to Fibre based broadband
Please bear in mind that in some cases it may not be possible to provide FTTC broadband in areas due to:
• Your phone line may be connected directly to the telephone exchange and not to a local street cabinet - (Exchange Only Line [EO] )
• Your line may be too far from the local street cabinet to have a stable FTTC broadband service such as BT Infinity service.
• Your local street cabinet may not be suitable for fibre optic cables.
• We haven't yet got the council's planning permission to do the necessary work at your local street cabinet.
• Your home may not be suitable for fibre optic cables.
• Your landlord may not have agreed to the fibre infrastructure being provided in your building (for example if you live in a flat).
There are different stages to the development of the fibre infrastructure in the UK.
If you have an EO Line then currently you will not be able to have FTTC broadband as your line isn't connected to a cabinet. In these instances Openreach plan to connect some areas that have EO lines with either FTTP or other fibre technologies in the future.
This video explains more: http://www.youtube.com/watch?feature=player_embedded&v=p0qN5XHuI5Q
Also check the Openreach "Power of Fibre" website: http://www.superfast-openreach.co.uk/the-big-build/the-power-of-fibre.aspx
You can keep checking the BT Wholesale Database and BT Infinity website for upto date information as these are updated regularly.
The openreach When and Where website is: http://www.superfast-openreach.co.uk/where-and-when/
**The Fibre-Optic Broadband Rollout is being managed and done by Openreach for all communication providers/ISPs.
BT Retail (your communication provider/ISP) has nothing to do with the rollout of fibre broadband.**
Hope that helps.
Cheers.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Issue moving remote user from exchange 2007 to 2013

have moved over 60 people so far from exchange 2007 to 2013, it was going well with no major problems.
during migration I have created a DNS setting called legacy.mydomain.com, and it points to the old exchange server, while mail.mydomain.com points to the new exchange server.
outlook was working connecting to both servers, and OWA was working on both servers.
couple of remote users who connect via SSL-VPN and outlook 2010 had issues connecting, but as soon as I moved them to 2013 exchange they connected without vpn using outlook anywhere.
but - I have one remote user who even though the mailbox move to the new 2013 server was successful, their outlook still points to the 2007 exchange server.
if I try creating a new profile in outlook 2013, it fails because it cannot contact exchange server, even when ssl-vpn is running.
when I started troubleshooting I found lots of spyware on his laptop, symantec had been blocking some trojans, obviously he had downloaded something he shouldnt have.
could this have caused my outlook connectivity issue?
I ran malawarebytes, and it shows clean now, but still unable to get his outlook to connect.
I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
any suggestions?

I had thought about moving his mailbox back to the old server, seeing if it works on outlook, then moving it to the new one again.
Hi,
Have you done this step? Sometimes moving mailbox to another database can auto-fix problems.
According to your description, I know that all migrated mailboxes work well except a specific user. I notice that the user's laptop has a lots of spyware, and symantec has been clocking some trojans.
Please try to logon OWA to check whether this user works.
If works in OWA, it seems that the mailbox has been migrated to 2013 successfully.
Generally, re-creating profile can fix this issue. Unfortunately, you have tried it and failed.
Please try to run Outlook under safe mode to avoid AVs and add-ins.
Thanks
Mavis Huang
TechNet Community Support

AirPort Express Base Station sticks out too far (Solution)

Hi all,
I don't know if this comes up very often in this forum but a problem with having the Airport Express Base Station plug directly into the wall is that it sticks out too far, IMO.
I have one hooked up in my bedroom so I can play music over a BOSE Wave Radio. I have two possible power outlets to plug it into. One is next to the bed. There is about 18 inch gap between the bed and the wall. I don't want the device there because I may bump into it while making up the bed. The other place is behind the dresser. However, this spot would make me have to pull out the dresser a little too far from the wall than I would like. Behind the dresser is preferred because it is the closest outlet to the radio.
Solution: I went to a local hardware store and found a six socket mini power strip that plugs directly into the wall. Here in the US, our power outlets have two sockets lined up vertically. This device plugs into both sockets. The top plug has all three prongs. The bottom one only has one ground prong. Each side has three 3-hole sockets. The sockets on one side are upside down.
With this mini power strip, I can plug the Airport Express Base Station into the side of the strip such that the side of the base station is almost against the wall. Now, I can have my dresser very close to the wall. There is a very small gap between the base station and the wall and dresser to allow it to breathe.
I also plan on using more of the these mini power strips behind other pieces of furniture so that the furniture no longer pushes against power cords sticking out of other outlets. The one downside is that this mini power strip won't handle wide transformer based adapters.
I hope this tip helps others.
Enjoy life!
Steven

See the original message.

How far away from a cabinet is deemed 'too far' fo...

Hi
Can anyone answer this question:
How how far is too far away from a cabinet to get Infinity ?
Thanks
Ollie

Hi again ollie44,
BT Retail who offers FTTC (Fibre to the Cabinet) BT Infinity which is their brandname for fibre broadband, to customers who are estimated 15mbps or above for FTTC.
You can still get FTTC fibre broadband from BT Retail if you are estimated under 15mbps for FTTC though the product is called Faster Unlimited broadband.
FTTC fibre broadband currently enables a upto 80mbps broadband service, though this will depend on how far away you are from the FTTC cabinet and the quality of your landline.
FTTC fibre broadband uses VDSL or VDSL2 signals that travel from the FTTC cabinet to your property via the existing copper (sometimes aluminium) line. The further away you are from your FTTC cabinet the slower the fibre FTTC broadband will be.
However VDSL/2 signals used for FTTC broadband connection degrade far quicker in terms of distance than conventional ADSL broadband signal do.
Generally speaking if your landline is over 1500 meters in length from the FTTC cabinet to your property then you may not be able to get BT Infinity as you may not be able to achieve over 15mbps from an FTTC service.
Here is a graph that shows the ADSL(G.DMT,ADSL2 and ADSL2+) and VDSL/2 (FTTC) signal with distance. Please be aware that all ADSL connections are depend on distance from local exchange, where as FTTC (VDSL/2) connections are depend on distance from your FTTC (DSLAM) cabinet. Though all connection types are also depend on line quality.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

I shot a video using my iPad 2, and it is too far away from the subject. How do I zoom in and save the whole video like that? Thanks!

Sorry to be such a moron with this, but I just don't have much experience with this iPad. I have had it for over a year and I just keep adding stuff to it and it has worked great. Now that the memory is used up, I am trying to figure out how to free up space and not lose what I have paid for.
So, Step 1 is complete, as I have "Transferred" all of the purchases.
What is Step 2? I unchecked the concert on the iTunes library, did a sync, but it's still on my iPad.
Thanks again for the help!!!

IMovie has dragged photo from iPhoto too far off screen that I cant find it

I have opened a logo within the iMovie viewer screen that had so much black around it that I couldn't figure out which way to drag the photo to find the small logo surrounded by black. After so much dragging around I am not sure which way I need to drag the photo around within the iMovie viewer to have it centered, much less even visible. Apparently, iMovie saves that setting. Now even when I open completed projects where the photo was centered it is not showing it. I think it has the photo so far off to the left, right, below or above that it won't find any of them. I have tried zooming in and out with the photo settings in iMovie. Still nothing. I tried using other pictures very large or very small but am afraid that I dragged the first one around which was about 30" x 30" with the logo only occupying about 4" in the center that I have moved the center too far off the axis that it would be occupying the theoretical space several feet off the center of the viewer and have no idea which way to drag it to get it back into the center. Hope that makes sense.
Hunter

Hey,
Thanks for the quick response. I am trying to bring a logo from a near pinpoint using Ken Burns effect to as big as I can before I transition to a bumper. I did this once before and had the same problem. I finally found the center of the picture/logo by moving it around, trial and error and luck. I have tried to use known good images in place of the logo that went black and it seems they are all showing black as if they are all so far off center they only show black. I have opened finished projects where it shows a similar logo effect and when I go to 'edit photo settings' in the completed project it the image goes (or shows) black.
Now, any project I go to I can't bring in any picture from iPhoto without it showing just black. If you try using a photo in iMovie from iPhoto and put it off center, it seems the next time you try using another one it's starting point is just as far off center (the same point) as the last one that was moved around.
Not sure if I explained that correctly.
Hunter

My cabinet has fiber yet I am too far away to get ...

Hi Guys,
I was wondering whether I have any options as appartenly I'm too far away to recieve fiber?
Currently my area get <1Mb down so I'd be happy if fiber got us up to something like 8Mb however I'm told they can not check this. I know the further from the cabinet you are the worse the speed will be however the pub I can see across the fields (roughly 1 mile away) receives fiber and has around 15Mb down. Will that mile really make it worthless?
Details:
Exchange HELSTON is served by Cabinet 21
Any help would be MUCH appreciated.
ALSO - is there an option to change what cabinet we're on?

Ah, FTTPoD is available to you. It would help because you could get 330Mbps down and 30Mbps up lol.
And yes, it is stupidly expensive but you wouldn't have to go out, so you could sell your car for example.
I suggest you contact Pishnet and see if they can give you some idea of the cost.
To say thanks for a helpful answer, please click the white star

PSE 11 New layout - too far the opposite direction?

I have been a long time user of Photoshop Elements, I think since version 2 or 3. I went from 6 to 10 earlier this year and have been working with a Trail version of 11 for a few days now. Overall, I like it, but like so many companies do, when they address a major concern of a large group of customers, they go too far in the opposite direction.
Two major complaints about PSE up through 10 are that it is A) too dark and B) the control icons/text are too small and difficult to see. This is mostly a complaint of the visually impaired. (Which is an interesting side-discussion, given that photography is a visual art).
Although I liked the dark layout, I tended to agre with most users about the latter complaint. The icons and text were difficult to see even for people with good vision. With PSE 11, I see the exact opposite, the layout is too bright for my tastes. After all, the purpose of this software is to work with images. A dark layout lets me focus on the image itself, and not be distracted by the controls.
That much I can adapt to, but the bigger problem is the screen real estate taken up by the Tool Options. It's HUGE! Especially when working with images in a vertical format, which represent a significant percentage of my images. For example I love to play around with vertical panoramas, an often overlooked way to capture a scene such as tall trees, buildings, etc.
I am finding myself constatnly havign to toggle back and forth between the Tool Options bar, and even with the F4 keyboard shortcut, it's a pain in the butt.
So... my opinion is that Adobe fixed a couple big problems for a lot of users but went too far and created a different set of problems for many other users. Anyone have any thoughts on this?
What I'd like to see are some different solutions:
First of all, I'd like to see an option between dark and light layouts. Let users decide. Kinda like making the program skinnable, but not all that many options are needed.
Or... how about an auto-dimming feature? When the mouse is hovered over the image area, while working with the various tools, automatically dim the surrounding panels and menu bars. Then, when you move over the panels and menus, they would return to normal.
Second, find a better solution to the Tool Options bar. Either make it A) moveable, like the other panels, B) resizeable, or C) auto-hide it.
At this point, I've almost decided that the size of that Tool Options Bar is a deal breaker and I won't upgrade. Vertical real estate is hard enough to find on computer monitors and Adobe took up 25% of what little I had. I'll wait for a future version to see if they take it back the other way.

True, and I have that option enabled. Given that I need to use the Tool options, primarily Crop, with different settings on each individual image, I am finding myself opening and closing the options bar constantly. I have two options: have it pop up when I don't want it to, or I have to open it when I want it, then close it afterward. Either way, the resulting workflow is tiresome at best.

Moving public folders from exchange 2003 to exchange 2010 error while moving replicas

Dear All,
i am in the process of migrating from Microsoft Exchange 2003 to Exchange 2010,
i am done with moving all the mailboxes 300 mailbox almost with a 1.5 TB DB with no issues
when i tried all the processes, procedures, instructions and forums to move the public folder or
to use move all replicas from Exchange 2003 to Exchange 2010 i always get errors , now when i try
to open PF Management console from the exchange 2010 server i get it but it is disconnected
then i can choose to coneect to the new server name EXCHANGE2010 with no issues
when i try to expand the default folder and system folder i get the following error.
OAB is set on the new server as default.
when i try to add replica using power shell i get this error:
WARNING: An unexpected error has occurred and a Watson dump is being generated: Object reference not set to an inst
of an object.
Object reference not set to an instance of an object.
+ CategoryInfo : NotSpecified: (:) [Get-PublicFolder], NullReferenceException
+ FullyQualifiedErrorId : System.NullReferenceException,Microsoft.Exchange.Management.MapiTasks.GetPublicFolder
following error when trying to expand PF on EXCHANGE 2010
Microsoft Corporation
Microsoft® Windows® Operating System
6.0.6000.16386
Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''.
Microsoft.Exchange.Configuration.MonadDataProvider.CommandExecutionException: Unexpected error [0x7653450B] while executing command 'get-publicfolder -getchildren -identity '\' -server 'Exchange2010.ptdubai.com''. ---> System.NullReferenceException: Object
reference not set to an instance of an object.
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.GetMapiPublicFolderDatabasesIdentities(ADSystemConfigurationSession configurationSession, ADObjectId serverId, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ValidateServerContainsPFDatabase(Server server, ADSystemConfigurationSession scSession, TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.MapiTaskHelper.ResolvePublicFolderServerAndUserLegacyDNs(ADSystemConfigurationSession scSession, ServerIdParameter serverIdParameter, String& serverLegacyDN, String& userLegacyDN, Fqdn& serverFQDN,
TaskErrorLoggingDelegate errorHandler)
at Microsoft.Exchange.Configuration.Tasks.GetMapiObjectTask`2.CreateSession()
at Microsoft.Exchange.Configuration.Tasks.DataAccessTask`1.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.GetTaskBase`1.InternalStateReset()
at Microsoft.Exchange.Management.MapiTasks.GetPublicFolder.InternalStateReset()
at Microsoft.Exchange.Configuration.Tasks.Task.ProcessRecord()
at System.Management.Automation.CommandProcessor.ProcessRecord()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.ClosePipeline(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadPipelineProxy.InternalEndInvoke(IAsyncResult results)
at Microsoft.PowerShell.HostingTools.PipelineProxyBase.EndInvoke(IAsyncResult results)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadCommand.EndExecute(MonadAsyncResult asyncResult)
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Close()
at Microsoft.Exchange.Configuration.MonadDataProvider.MonadDataReader.Dispose(Boolean disposing)
at System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataTable dataTable)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.Fill(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.DataTableLoader.OnDoRefreshWork(RefreshRequestEventArgs e)
at Microsoft.Exchange.Management.SystemManager.RefreshableComponent.worker_DoWork(Object sender, DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementConsole, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
MMCFxCommon, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Configuration, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Xml, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
System.Drawing, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Management.PublicFolders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management.SystemManager, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Common, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.ManagementGUI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Microsoft.Exchange.Diagnostics, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.Data.Directory, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Drawing.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Microsoft.Exchange.ManagementGUI.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Management, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Isam.Interop, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Transport, Version=14.0.631.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.PowerShell.HostingTools, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
BPA.UserInterface, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.adsiis, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Interop.Migbase, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.DKM.Proxy, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.AirSync, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Approval.Applications, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.CabUtility, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Cluster.Replay, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.RedirectionModule, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.ApplicationLogic, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Mapi, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Providers, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.Storage, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.EdgeSync.DatacenterProviders, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Extensibility.Internal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.InfoWorker.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Live.DomainServices, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MailboxReplicationService.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessageSecurity, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.MessagingPolicies.Rules, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Net, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Rpc, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.ExSearch, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Search.Native, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.StoreProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.AntiSpam.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Agent.SenderId.Core, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Logging.Search, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Transport.Sync.Worker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UMCommon, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.UM.UmDiagnostics.Common, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Collaboration, Version=3.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Rtc.Media, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
MSExchangeLESearchWorker, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management.Automation, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Core.Strings.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.HelpProvider, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
pspluginwkr, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
System.Management, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.DirectoryServices, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Accessibility, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
MMCEx, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Anonymously Hosted DynamicMethods Assembly, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null
Microsoft.Exchange.Data.Directory.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Data.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
Microsoft.Exchange.Configuration.ObjectModel.resources, Version=14.0.0.0, Culture=en, PublicKeyToken=31bf3856ad364e35
i will be thankful for any assistant.
PF DB is arounf 90 GB with alot of public folders and sub-folders. around 60 mail PF and too many subfolders.

First and the most important thing you need to do is, upgrade exchange 2010 to SP2 and RU5.
Exchange 2010 RTM support is long gone.
http://www.microsoft.com/en-us/download/details.aspx?id=36768
http://www.microsoft.com/en-us/download/details.aspx?id=41480
Your exchange 2010 is still in stogeage ;)
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Removing mailbox server from Exchange 2010 DAG - Node not fully cleaned up

Hi,
We are in the process of decommissioning some old Exchange 2010 servers. I have just attempted to remove one of our mailbox servers and have received a number of errors, related to its removal from the DAG.
I have already removed the Public Folder replicas and all mailbox database copies. I then tried to evict the server from the DAG and received the following warning:
I then ran the command that was recommended, from another server and in an administrative command prompt:
I have looked in this log on both the server I ran the command on, a CAS server, and the mailbox server itself and can see no evidence of this error 2 that is listed here.
If I run the Powershell command to look at the DAG I cannot see it there any more. I am assuming that this error message might only be an issue if I was planning on re-using this server somewhere else in Exchange or perhaps adding this server to another
DAG. But I just want to decommission it.
Can anyone put my mind at rest as to whether this is a genuine concern or not. If not my next step is to uninstall Exchange 2010 from this server and turn it off.

Hi Belinda,
I get the following:
[PS] C:\Windows\system32>Get-DatabaseAvailabilityGroup
Name Member Servers
Operational Servers
DAG01 {WSR-EX-01, WSR-EX-101, WSR21}
It doesn't look like that server is part of the DAG any more as far as I can see. I just can't explain that error message reported from the cluster command. As far as I can see the server is isolated. I already removed its database copies as a pre-requisite
before removing it from the DAG as per this guide:
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_27039933.html
I found a nice little script that gave reports on your Public Folder configuration and it highlighted that some of our folders were not being replicated properly across our mailbox servers. This helped me in removing these services from the server.
It is currently doing nothing at this time as far as Exchange Services are concerned.

Creating a 1 page scrolling site - problems with the final section scrolling too far

I have created a 1 page scrolling site that works fine apart from the final section, which scrolls too far. My site is made up of a pinned headr, a pinned footer, and 4 sections (defined by rectangles - each one 1011 pixels high). I have used scroll effects to bring the items in and out.
The site can be viewed here: Home
The problem is with the contact us section, where you seem to be able to scroll further than the bottom section.
These are my document set up settings:
so my height is set to 4042 (though I have tried it with 4044 - 4x1011 - it makes no difference. When I click on the link to the contact section it looks fine, but I then seem to be able to scroll further down, and this seems dependant on the monitor / browser size. The problem is more pronounced with a smaller monitor / browser size in height.
I have tried everything I can think of to make it not scroll beyond what the anchor takes it to when I click on the link, but whatever I do the problem seems to persist.
I would welcome any suggestions on this, and also any general feedback on the site. But help with the problem first please.
Many Thanks in advance - I would be happy to post the muse file but cannot seem to find a way to do this.
Ian

Thanks for the help. Is there a way that I can upload the file for someone to look at - I have tried your suggestion but cannot find any empty text boxes or anything at the bottom. I have gone top right and tried the upload file section but it tells me that I am not allowed the create the content.
Actually i'll put it in dropbox and share it that way.
Dropbox - YESS2.muse
Hopefully someone with more knowledge than me can see what I have done wrong - it is my first time doing a 1 page scrolling site so it might be a school boy error
Cheers
Ian

Too far from exchange?

Similar Messages

Maybe you are looking for