Tool-tip text for Selection screen buttons.

Hi all,
Got another requirement and need your help.
I have a user-defined selection screen in my program. I would like to know if it is possible to have a tool-tip text ( quick info ) for the Pushbuttons on this selection screen.
Any help is appreciated.
Regards,
Anand Mandalika.

Function Buttons.
For report programs you declare the selection screen appearence with select-options, parameters and selection-screen commands, function key is one of them.
So a quick example
REPORT ZYX.
TYPE-POOLS: ICON.
TABLES: SSCRFIELDS.
DATA: WA_FNTXT TYPE SMP_DYNTXT.
SELECTION-SCREEN FUNCTION KEY 1.
INITIALIZATION.
WA_FNTXT-ICON_ID = ICON_GREEN_LIGHT.
WA_FNTXT-TEXT = 'Go Faster'.
WA_FNTXT-QUICKINFO = 'NO Speed Cameras'.
SSCRFIELDS-FUNCTXT_01 = WA_FNTXT.
AT SELECTION-SCREEN.
CASE SSCRFIELDS-UCOMM.
WHEN 'FC01'.
etc.

Similar Messages

Tool Tip Text for field values in ALV report

Hi,
How to get the tool tip text for the field values in ALV report.
Thanks & Regards,
Pallavi.

Hi,
In fieldcatalog specify the TOOLTIP.
<b>
LVC_S_FCAT-TOOLTIP
</b>
In this speicfyteh tooltip you want.
Then append this to the fieldcatalog.
Hope this solves ur problem.

Tool-Tip Text for button

Hello,
I have a button which I have statically associated with a tool-tip text.
I did this by setting the TooltipText to a text element.
However, when I run my program, the tool-tip does not appear
for the button. This button does not have any text it it, only an ICON.
Therefore, I need a tool-tip to inform the user about the functionality
of the button.
Can anyone please tell me how the display the tool-tip?
Best regards,
Divyaman Singh Rawat

HI,
Go to screen layout and double click on the button for which you are setting the toop tip text. Then Attributes window will open. In that window, Just below the 'Icon name' field, there is 'Tooltip' field. You give the tool tip text there.
Also Dont forget to save the layout. After saving come to flow logic and activate the program and run. Then it definetely shows the tool tip when you place the mouse pointer on the button.
Cheers
Murali Krishna T

Hi, unable to display full text on selection screen

hi all
please any one tell me how one can display full text on selection screen because whatevery i have defined in text for selection screen variable is not displaying full text, some letters are missing.
for example :
Poste(s) du document de facturation
above text i want to display on selection screen.
but only Poste(s) du document de factur
is displying. some letters are missing
please try to solve this
thanking in advance

Hi Raj,
Check this..
SELECTION-SCREEN COMMENT fmt name.
Additions
1. ... FOR TABLE dbtab
2. ... FOR FIELD f
3. ... MODIF ID mod
4. ... ID id
Effect
Generates a comment on the selection screen. For the name name , there are two options:
name takes the form TEXT-xxx where xxx is a three-character name for a text symbol. In this case, the contents of the text symbol are displayed at runtime, i.e. the text cannot be changed dynamically. name is another eight-character name. Here, you create a field with the name name in the length specified in the format fmt< /> and it is then generated as an output field on the selection screen. The contents of these comments must therefore be set at runtime (e.g. at INITIALIZATION or - in the case of comments in the database include program DBldbSEL - in the routine INIT of the database program SAPDBldb . They can also be changed when the selection screen is being processed.
Note
The field name is generated automatically and so cannot be defined with DATA .
With comments, you must always specify a format fmt (see variant ULINE ).
Note
You must program a new line yourself via the format fmt .
<b>Example
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(20) TEXT-001
FOR FIELD PARM.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
SELECTION-SCREEN END OF LINE.
This code displays a 20-byte long comment followed by the parameter at the normal position ( POS_LOW ) on the same line. If the user presses F1 for both objects, the documentation of SAPLANE-PLANETYPE is displayed.</b>
Regards,
Raj

How to create a variant for a selection screen button

hi ,
      i have created a selection screen for a normal report .
In the selection screen there is one button after the selct option for company code. when user enters some company code and presses the button the user i call a able contraol in which user gives some additional values for the comapny code.
how do i create variant. when i create varaint for the slection screen it does not take into account the other screen i called .
so every time user has to click that button and enter some values and execute. please suggest some way.
THANKX IN ADAVANCE:)

Hi,
      Inorder to create a variant for selection screen report, you need to enter valid data on the screen and click on the SAVE button which is available in the Menu.
      And regarding the button you were asking about after select option, it is not created manually it comes automatically,, you can remove this by mentioning no-extension after the select-option. You can get clear information of this if you do F1 help on select-option.
My advice to you, make effect use of F1 help.
Edited by: Madhuri on Sep 23, 2008 4:46 PM

Code for selection screen, urgent

Hi Everyone,
I need code for selection screen.
I have four radio buttons, p1, p2,p3,p4(assume)
If I select second radiobutton, remaining three radiobuttons should be in disable mode and also the information under them should be in disable mode. Give the coding details. Thanks in advance. U will be rewarded.
Regards,
Nagaraju

Hi,
REPORT ZTEST222 .
PARAMETERS : p_add RADIOBUTTON GROUP radi
                         USER-COMMAND radio MODIF ID MOD,
p_disp RADIOBUTTON GROUP radi DEFAULT 'X' MODIF ID pod,
p_chng RADIOBUTTON GROUP radi MODIF ID rad,
p_er_log RADIOBUTTON GROUP radi MODIF ID cod.
SELECT-OPTIONS : s_idn    FOR vendor   MODIF ID mod,
                               s_pcode FOR ws_c_pcode MODIF ID pod.
PARAMETERS: p_plant    LIKE zaw_pol_plan-plant   MODIF ID rad,
             p_zzvend   LIKE zaw_pol_plan-zzvendor   MODIF ID cod.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF p_add EQ 'X'.
      IF screen-group1 EQ 'MOD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_disp EQ 'X'.
      IF screen-group1 EQ 'POD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_chng EQ 'X'.
      IF screen-group1 EQ 'RAD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
IF p_er_log EQ 'X'.
      IF screen-group1 EQ 'COD'.
        screen-active = 1.
        MODIFY SCREEN.
ELSE.
         screen-active = 0.
        MODIFY SCREEN.
ENDIF.
Pls. reward if useful
    ENDLOOP.
Pls. reward if useful

How to write HTML code in Web Template for selection screen

Hello All,
Is it possible to write a html code in the web template html tag so that the output of the html is displayed in the selection screen, i.e before the execution of query.
I know that we can write html, which will be displayed once the query has been executed, but can it be done for selection screen.
if so, how.
My exact requirement is : to display a 2-3 lines of text in the selection criteria screen - sort of, various options available to user for entering values in the selection screen. I was thinking of putting this text using HTML code in the selection screen.
Regards,
Nagendra.

Hi Erick,
No, unfortunately nobody replied to this thread. So i assumed it is not possible to modify the selection screen thru html code.
Btw, as my requirement was to provide user with multiple answers on the selection screen. I did the validations on customer exit and popped an errror dialog when applicable.
Regards,
Nagendra.

Search help for selection screen field

Hi ,
steps for creating search help for a key field in selection screen..
tables is a userdefined from which the field is taken..
thxs,
vind

hi,
c this.
REPORT ZXYZ_0002 .
data: dynfields type table of dynpread with header line.
data: return type table of ddshretval with header line.
selection-screen begin of block b1 with frame title text-001 .
selection-screen begin of line.
PARAMETERS: P_BUKRS type T001-BUKRS.
selection-screen comment 30(20) BUTXT for field p_bukrs.
selection-screen end of line.
selection-screen end of block b1.
at selection-screen output.
if butxt is initial.
   select single butxt into butxt
         from t001
        where bukrs = p_bukrs.
endif.
at selection-screen on value-request for p_bukrs.
call function 'F4IF_FIELD_VALUE_REQUEST'
       exporting
            tabname           = 'T001'
            fieldname         = 'BUKRS'
            dynpprog          = sy-cprog
            dynpnr            = sy-dynnr
            dynprofield       = 'P_BUKRS'
       tables
            return_tab        = return
       exceptions
            field_not_found   = 1
            no_help_for_field = 2
            inconsistent_help = 3
            no_values_found   = 4
            others            = 5.
read table return with key fieldname = 'P_BUKRS'.
Add it back to the dynpro.
dynfields-fieldname = return-retfield.
dynfields-fieldvalue = return-fieldval.
append dynfields.
Get the company code from db and add to dynpro
data: xt001 type t001.
clear xt001.
select single * into xt001
         from t001
        where bukrs = return-fieldval.
dynfields-fieldname = 'BUTXT'.
dynfields-fieldvalue = xt001-butxt.
append dynfields.
Update the dynpro values.
call function 'DYNP_VALUES_UPDATE'
       exporting
            dyname     = sy-cprog
            dynumb     = sy-dynnr
       tables
            dynpfields = dynfields
       exceptions
            others     = 8.
start-of-selection.
rgsds
anver
if hlped mark points

Dynamic Tool tip text/Quick Info

Is it possible to have dynamic tool tip text when you hover over an icon on a report? I know you can change the function key text but these icons are present on the report itself.
Any ideas?!

Check if you have the QUICKINFO option for the WRITE statement for your release.

Agentry - Dynamic text for Platform wizard button?

Hi,
I want to reuse the same screen set navigating from 2 different places.
The text for the "Move to the Next Screen (cannot back up) platform wizard button should be different in each case to make it easier to understand for the end user. Apparently the only option is to hardcode a text, but I would like to know if it could be possible to use a rule or something to display a dynamic text for the wizard button.
Thank you,
Marçal

Hi Marcal,
Unfortunately that idea was shot down a while ago, though it would be nice. The general dividing rule I use is if the question is appropriate for Agentry regardless of whether it is installed standalone (like Work Manager 5.3) or on any version of SMP, then it should be in SAP for Mobile. These are usually application development or customization types of questions. The Agentry landing page is in SAP for Mobile for that reason. Though the line is definitely getting blurry now that Agentry apps are moved or moving to the SMP.
If the question relates to Agentry issues which directly involve SMP (usually installation, implementation, or configuration), then it should be in SAP Mobile Platform Developer Center.
I am planning to put together a blog or several to help go through where and why different posts should be placed. Also one about tagging!
Thanks, Mike
SAP Customer Experience Group - CEG

Trying to make tool tip text visible longer

Having no luck finding a way to keep tool tip text visible for longer period of time. Keeping it visible for as long as the mouse is over the component would be ideal but any increase would be helpful.
Is there a way to set the time the tip is displayed?

Hi,
Try the following code:
ToolTipManager.sharedInstance().setDismissDelay(100000);
That should keep your ToolTip showing for a long time. Change the value if you want it longer.
Adrian

How to set Tool Tip Text to Tree Node?

Hi,
How to set Tool Tip Text to Tree Node in JTree?
Pls somebody help me to solve it.

bsampeieri,
Been here a long time myself. I don't agree with the one post is enough per se. That is to say, sometimes, it helps to post in several groups so that more eyes may see it. A number of forum posters linger in specific forum topics and may not see the post in another forum.
Now, if in the previous post you/others answered the question and then the OP posted here later, I could see the complaint.
For the OP, the better way to cross-post is to have one "main" post, then have all the other posts refer back to that one (link to it) so that people aren't duplicating the effort to answer your question(s). A simple "I have cross-posted this to get more eyes on it. Please reply to this question at this post <link here>"

Removing tool tip texts in pdf?

Hello there and good day. I have a pdf document in abobe 9, and it has hyperlinks and when I hover over them with the mouse it has the link addy in the tool tip text thing. I was wonder if there was a may to remove it or have that box blank. Thanks!

Hi Josh,
I do see the question mark with the tool tip in the test form, but the saved form does not reveal any question marks. The tool tips are not present.
Thanks,
Santi

Change default value (200) of Max No of Hits for selection screen in WAD

How do i change the default value of Maximum Number of Hits from 200 to 1000 for selection screen's find box in Web Application Designer .
Thanks in Advance
Points will be surely Rewarded

Dear Hammad,
Please refer to the wiki created by me,
http://wiki.sdn.sap.com/wiki/display/BI/Information+on+the+user+setting+for+the+selector+dialog
Regards,
Arvind

How to set default variant for selection screen

Hi,
I want to make one variant as default for selection screen for one user.
For eg., take COOIS. For the selection screen, i have 3 variants. But i want one variant to be default. Thsi is not for all users. Thsi is for particular user.
I am not seeing any way to do this. please help me..
Thanks
Srini

Hi,
If you are using Z program then you can ask your developer to get Variant name Runtime from Parameter ID.
This means you decide a Parameter ID name : ZVAR in your Z program and ask your developer to load variant each time your Z program loads.
Now, second step will be using SU01 transaction you can set value of ZVAR in Parameters tab for the user. This value will be the variant which you created for this user.
This will solve your problem and you can make n number of variants and assign it to different users.
Regards,
Arpit

Tool-tip text for Selection screen buttons.

Similar Messages

Maybe you are looking for