TOSHIBA 40RV525R trying to reduce display for all to fit on screen

I have had this 40 inch LCD for a couple of years. When I'm watching football games, especially on FOX and even some game shows that have wording on the screen, the wording or scores on the far left and right gets chopped off. I've tried everything I know how to get everything to fit on screen.

Try using the PIC SIZE button at the top of the remote to cycle through various picture size options. One of them might fit better.
- Peter

Similar Messages

  • Text caption set up to display for all of slide

    hello
    i'm using captivate 5 and have another query.
    is there a way to automatically set up text captions to display for the whole slide not a specific time? I know how to set this, but to go through and do this for every text caption is proving to be very time consuming.
    look forward to hearing from you.

    The Timing accordion of the Text caption could allow you to apply the setting 'For rest of slide' to all text captions (use the curved arrow, highlighted in screenshot), but the drawback is that this timing accordion also has the start time that will then be applied to all text captions, which is not always what you'll want. So for the example of the screenshot, all text captions would get a start at 4,5secs if I applied this setting to all.
    If you want all future Text Captions in all projects to have the setting 'For rest of slide' make changes to the Preferences before opening a project.
    Lilybiri

  • Documents of Record doesnt display for all employees inCustom Responsiblity

    Hi
    I have created custom responsibility with function of Documents of Record. I have enabled the Passport and Visa Information under this custom responsibility, it is not displaying the icon fro searching employees, default it is showing the same employee Passport and Visa Information.
    If i log in with UAE HRMS Manager, it is displaying the Search button for all employees where as new custom responsibility is displaying only one employee.
    Can you please guide on this.
    Regards
    Arjun
    [email protected]

    I haven't done any work related to IP-camera. So, sorry I can't help you with
    reading images from IP camera and generating a movie. But I guess, you might
    find a solution in some posts of this forum or if I remember correctly,
    in the book "Killer Java Games", there's a chapter discussing this issue
    of making movies in Java.
    I just happened to work on a project that requires reading images from
    a MJPEG stream. Unfortunately, it is a commercial project and I'd be very
    unprofessional if I expose some code of that project here even though
    I wrote the code myself. Anyway, I used a algorithm similar to what you
    guys did in this thread ((I implemented it abit differently, though)
    http://forum.java.sun.com/thread.jspa?threadID=494920&start=0&tstart=0
    One thing I noticed is that after I read the first image successfully, there were
    still some data, which I haven't got time to investigate what kind of data they
    are, before I encountered the boundary between successive images and other
    customized header lines. So after reading an image, I just read each line of
    data and check if it starts with the boundary string. If I got to the boundary,
    then I start to read (and remove other header lines) before I start reading the
    next image. Again, similar to the post mentioned above, this method
    requires you read the server manual (or print out the boundary and header
    lines in case you don't have such document available). But it does give you
    easy access to custom header lines.
    Alternatively, you can detect the start of the raw JPEG data like one guy in the
    above post did.
    Good luck, mate!

  • Folders under a role displayed for all users

    Hi
    I had created a role called Role A and this had two folders unders that named Folder A, Folder B. I assigned this role to User A only.
    I logged into the portal as User A, and saw that these two folders were visible, and as I had wanted it.
    But when I logged in with the administrator's account too, I noticed that along with Content Administration, User Administration, System Administration, I also had Folder A and Folder B.
    I checked the roles for Administrator and Role A has not been assigned.
    I dont want this Folder A and Folder B to appear in the admin's account.
    Please help.
    Thanks
    Manoj

    Hi
    Thanks for your help. Its not a permission issue for that folder, and no other groups are added in Role A.
    I guess, like Venkatesh says, it could be the content admin role or super admin role. But surprises me as to what would happen if there were more than 100 folders.
    There must be something else to it. I suspect this to be a cache problem, as I had added Role A to Administrator's group and then removed it from there. I will check this and confirm.
    Thanks for all help
    Regards,
    Manoj

  • Saved Interactive reports options display for all users

    Hello,
    For now I build once again my apex apllications in Apex 4.0
    I created a user. In the apex administration this user is not an administrator and not a developper either.
    However the saved interactive report options display for him too, so he can choose the look of the default report, etc...
    Is that a bug ?? Or did I forget something ?
    Thanks !
    Fanny

    Fanny, as long as you are logged in as a developer in apex you will be able to save the report as the standard report, no matter with what user you are logged into your application.
    Paul

  • Set PO query for all users in POWL screen

    Dear All,
    In Purchase order work list (POWL) need to define a new query and set it for all the users.
    Request to please let us know how we can create and set that query in POWL for all users?
    thanks,
    mahesh.

    Dear All,
    In Purchase order work list (POWL) need to define a new query and set it for all the users.
    Request to please let us know how we can create and set that query in POWL for all users?
    thanks,
    mahesh.

  • Loss of display image quality when fit to screen

    Hi everyone,
    I've noticed that when I'm editing with PSE and have the view set so that the photo fits the screen (which means, it's very much zoomed out), the quality of the photo suffers.  Almost like there's some pixelation, but not really.  I apologize for the unclear explanation, I just don't know what the term is for this loss of quality when zoomed out a lot.  I don't mean to disparage PSE, which is a great program, but I don't have this problem with another (free) program I also use.  I'm just trying to find out if it's something in my display settings that I can change or some other way I can fix this.  I often like to see the whole picture when editing but it's almost impossible to do editing when looking at the whole picture in PSE since it looks so off.
    Thank you.

    The image size are 1600x1200 or larger and should be adequate in size.  Anyone know how to improve the quality of the stills? I feel it may have something to do with the program resizing/ downsizing the pics.
    You are correct. This is a case of bigger not being better. I would suggest resizing in Photoshop, Photoshop Elements, or similar, to the Frame Size of your Project, or just slightly larger, if you need to pan on any, when they are zoomed out to full size.
    This ARTICLE will give you some tips on resizing.
    Good luck,
    Hunt

  • SSAS Cube Measures will not display for all associated dimensions in Excel client

    Dear All,
    Can you please clarify the below query to me?
    I have one Calculated Member CM1 and the expression used to calculate is:
    ([Dimension1].[HierarchyName1].CURRENTMEMBER.Prevmember,[Measures].[Amount]) associated to a Measure Group MG1.
    Dimension1 is having two Hierarchies HierarchyName1 and HierarchyName2.
    Measure CM1 is used to Calculate another calculated Member CM2 along with other Non Calculated measures and associated to the same Measure Group MG1.
    And the Measure Group MG1 is linked to other dimensions, Dimension2 and dimension3 as well.
    When I query the cube in Excel Client for the measure CM2, values appears only when the dimension Dimension1.HierarchyName1 is used to view the results.
    And values do not appear:
      When I do not use any dimensions (Only CM2 used to display in the excel)
      When I use Other dimensions linked i.e. Dimension2 and dimension3
      And Also does not display any values if the CM2 is used along with other hierarchy of same dimension1 i.e. HierarchyName2
    I don understand this concept OR Is this the concept how the tuples work in SSAS MDX?
    If a Calculated measure is created using a one of Dimension member, cannot we view that measure value along with other dimensions linked or when we do not use any dimension to view the results in excel?
    Can you please help me to understand this.
    Thanks in Advance and Regards.

    As you explained CM2 depends on CM1.
    The dependency for CM1 is "[Dimension1].[HierarchyName1].CURRENTMEMBER.Prevmember".
    So to get value for CM1 you need to bring HierarcyName1.
    So for CM2 also HierarcyName1
    has to be used only then the data will be visible. When HierarcyName1 is used you can play with
    the combinations of other dimension as well .
    http://www.bifeeds.com

  • PO delivery date field to be made display for all users except one user

    Hi All,
    I have a specific requirement:
    The delivery date field in PO should be made display only at the time of changing the PO. I know pretty well that this can be achieved thru Define Screen Layout at document level, which inturn will make this field disaply mode to all users.
    But it should be in changeable mode only for one user. how can we achieve this.
    Any ideas, please
    /R
    Antony

    Hi ,
    You can create a authorization object(Z one) which can be assigned to the user id who need authorization of change .
    In the exit , you can specify the logic that if SY-USER (current user) has the authorization id , the system will allow to change . If the user doesn't have the object in his roles , the system would not allow to change .
    This will help in providing / removing access to any user id .
    Regards,
    Hari.

  • Album artwork not displaying for all albums in Coverflow view

    Very interesting problem I'm having. All of my music has album artwork assigned to it and can clearly be seen in the preview pane at the bottom left of the iTunes window. However, not all the albums show up in the new Coverflow feature in iTunes 7. I've been trying to figure out what might be different about these images that would cause them to not show up. Also, the albums that don't show up in Coverflow view don't show up on my iPod nano either; all the other ones are fine though. Any ideas?
    17" Powerbook G4   Mac OS X (10.4.7)  
      Mac OS X (10.4.5)  

    I'm experiencing the same. It is funny, I can definitely not see something the displayed (or not displayed) graphics have in common. Some were fetched from the iTS, some bought from iTS, some fetched from other locations ...
    At first I thought that it might be because of my old but brave little iBook, but if you see the same on an G4, this is probably not the reason.
    My library is on an external hard drive connected via FireWire, and it is quite big (almost 15,000 tracks).
    Any help is appreciated

  • Quantity field not getting displayed for all document types

    Hi,
    I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
    WI- Inventory document
    WA-Goods Issue
    WE---Not showing quantity against (WE- Goods Receipt)
    Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
    Thanks
    Aravind

    Hi Aravind,
    Check SAP notes  1063198 and 1117587.
    FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
    relevant in this case. This is clearly explained in the note 1063198.
    The quantity posts through to FI on the 'goods receipt' items, but not on the
    'invoice receipt' items.
    In the FI normally the Quantity is not a 'real' important field, as it
    is more related to the MM area.
    But in the old 'Profit Center Accounting' and the old' Special Ledger'
    the field has been important.
    As the same logic of these areas to 'store' the Quantity is also used
    in the NewG/L the field get only filled in the line, where it make
    'sense' from our point of view, because only in the 'goods receipt'
    lines a 'real' Quantity is posted to the system.
    So as before in the PCA and SL, now also in the NewG/L the Quantity is
    filled in the correct and important lines and postings.
    In the BSEG ('old document segment table') the field is filled 'just'
    as it is send to the FI, but this is not completely correct from the
    business point of view.
    This can also lead to issues with the reporting and summation to this
    field. So with creating the new logic in the NewG/L the 'correct'
    standard of the 'writing' for the Quantity has also been taken over.
    So in the end, the update and display is correct according  SAP standard behavior.
    Actually,Quantities within G/L are never reliable,
    because the purpose of FI is a view on the data according to amount
    but not according to quantity.
    In the FI normally the Quantity is not a 'real' important field, as it
    is more related to the MM area.
    I hope I could be of assistance.
    Regards,
    Fernando

  • Bex objects translated text not displayed for all

    Hi,
    I have an issue in Bex elements language translation in Bex report output,
    Translation of Bex elements to PT language has done successfully and few of the Bex elements are getting displayed in PT language, but the problem i am facing is with the Chars / Key figures objects used in Bex (Like: 0GL_ACCOUNT / 0AMOUNT / 0MATL_GROUP...) which are used directly in report, for these objects text is still getting displayed in EN.
    When checked in backend tables i can able to see texts for objects with both languages maintained, and when i check the info objects short description from RSD1 by logging with PT language; i can able to see description in PT.
    But, in Bex report i am not getting description in PT for these.
    Please let me know whether i am missing any setting in between Bex and Backend objects.
    Your helpful answers are highly appreciated.
    Thanks,
    Praveen.

    Further to my above query,
    We are working on SAP-BW system on 7.3 with SP05.

  • Please answer once and for all the boot green screen

    I have searched everywhere for an answer since my issue.
    Relevant info:
    iPhone 3GS.
    iTunes version 10.7.0.21 (2012-09-12).
    Doesn't matter what system I have since this is related to an iPhone device.
    Fully charged battery before proceeding with the update.
    Updated the iOS 5.1.1 of the iPhone to iOS 6.0 through required update recommendation of iTunes.
    Never been abused, jailbroken, serviced or dropped. (never had issues until the update)
    Once completed the updated process of iTunes and iPhone was done with the internal installation, the iPhone rebooted with a green screen/hue and the apple logo was still original color "silver". It loaded up to the iPhone Configure screen still with green color screen/hue.
    I pressed on the power button for 5 seconds and slide "slide to power off" and the iPhone turned off. I waited about 15 seconds and pressed on the power button to turn the iPhone back on, hoping no more green screen/hue and the apple logo was still original color "silver" but returned to the original green screen/hue and the apple logo was still original color "silver".
    Failed!
    It still showed green screen/hue and the apple logo was still original color "silver" and booted to the iPhone Configure screen still with green color screen/hue.
    Remedies tried after searching the internet:
    Hard Restart/Reset.
    DFU Mode. (even tried a restore process with iTunes again *so much time wasted to obtain the iOS download again*
    Recovery Mode (even tried a restore process with iTunes again *so much time wasted to obtain the iOS download again*
    Recovery from Backup is denied because previous version was iOS 5.1.1 and iTunes refuses the process so (even tried a restore process with iTunes again *so much time wasted to obtain the iOS download again*
    Left the iPhone at the Configure screen until battery drained and then plugged it back into the USB port of system until it charged long enough for the iPhone to boot yet again green screen/hue and the apple logo was still original color "silver". It booted to the iPhone Configure screen which is still the green screen/hue and I left it charging until battery icon top right showed full.
    Now, can someone give a straight answer while staying on this topic about this issue, please?
    *I can understand if the apple logo was green then it could be a screen issue but it is not the case.
    All help is greatly appreciated even if you took the time to read all of this but did not answer.
    Thank you!

    halodev:
    I made a CF/Flex site based on the Flexstore sample app,
    using a database instead of XML as the data source; in case you
    want to see it:
    http://www.timos.com/dg/flex/DilemmaGames.html
    At first I had troubles similar to what you describe;
    initially, part of the problem was that my hosting company had not
    yet upgraded to CF 7.02. One other thing I had to correct: when you
    upload to your server, upload the entire ‘bin’ (or
    whatever your output folder is) minus the debug SWF.
    If it would help with other issues, contact me and I will be
    glad to make my project code available to you. Good luck.
    Carlos
    [email protected]

  • For all those with "BLANK SCREEN ISSUES" with MacBook Pro's....

    ...I suggest you direct all the issues you're having to Apple through the feedback form here:
    http://www.apple.com/feedback/macbookpro.html
    I for one have rang tech support twice now, had a go and the only response I got back was to go to that link, fill the form in and wait for response.
    State the problems you're having and post this link as reference:
    http://discussions.apple.com/thread.jspa?threadID=1478474
    Hopefully then Apple with acknowledge each of us.
    (PS. Apple people...DO NOT delete this post for being "off topic" because it most definately IS ON TOPIC!. Im trying to save people from calling tech support at their expense only to be told to fill in the feedback form.)

    veek wrote:
    MrWeatherbee wrote:
    stonecrest wrote:9.01 != 9.0-1
    Who are you directing that to?
    To you if I'm not mistaken...you upgraded to 9.0-1 via pacman,
    but the fix was in 9.01 not 9.0-1.
    If you read my post, I was responding to Vex who said 9.0[-1] fixed his issue. Knowing that 9.0[-1] != 9. 01 (and that the fix was in 9.01) , I told him it was weird that 9.0-1 fixed his problem (which is more polite than saying, "Bullsh*t!"), and I confirmed the weirdness by pointing out that the 9.0-1 upgrade I had performed earlier that morning did nothing for me (nor did I expect it to because the fix was in 9.01). Finally, I confirmed that building and installing 9.01 did the trick (as it was supposed to).
    I don't really think anybody was confused about 9.0-1 != 9.01. That's why I asked who Stonecrest was talking to. No big deal.

  • I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size for all my program. Is there a single setting that I can change?

    I'm new to Mac's and I find the display's just slightly too small. I'd like to increase the size of my display for all my programs. Is there a single setting that I can change as a default setting?

    You can drop the resolution a little, but it makes everything blurry.
    OS X isn't as friendly like Windows is to give some UI adjustment, one of many major complaints about the platform that has gone unheeded for years now.
    As a lifelong Mac user who's eyes are going due to age, I'm really liking Windows 7 more and more every day.
    If you use Firefox, NoSquint and Theme Font & Size Changer add-ons, with a nice persona that makes better contrast, tweak the FF toolbars, you can at least make your web surfing tolerable on Mac's.
    Also you can set a Control key in System Preferences > Universal Access plus a scroll wheel mouse, if you need to zoom in/out certain areas of OS X, however for a pernament UI scale solution there is none that's practical, unless you have a large room, a projector and a smooth wall.
    A larger monitor won't work up close neither, however dropping the resolution and sitting back a bit might sharpen the images a bit.
    The UI really needs to be adjustable and it's not.

Maybe you are looking for