TOSHIBA Blu-ray Disc Player not compatible with USB speakers

I have a P850, using Logitch Z305 USB speakers. The speakers work fine with all other multimedia software such as WMP, iTunes or MPC, but not with TOSHIBA Blu-ray Disc Player. The Toshiba program either won't work or will crash if the speakers are plugged in. Is anyone aware of a way to fix this?
Thanks

This Logitech speakers are plug and play device that uses standard driver and are installed as any other plug and play device. I dont have it but I saw interesting movie on You Tube about it.
To be honest I dont understand why it cannot works with TOSHIBA Blu-ray Disc Player. I think you are the first one who has reported about this issue.
Problem is that Toshiba doesnt support third part software or hardware so it is not easy to find solution for this.
I really hope there are other users who have fixed it or can offer some useful tip for this pretty strange issue.

Similar Messages

Encoded video doesn't work on Toshiba Blu-ray disc player

I have a problem that I am trying to encode a sequence of frames in a video container , but the encoded video doesn't work on toshiba blu ray disc player .. I am using the following ffmpeg command to encode frames and convert them to a video:
ffmpeg -i "C:\ManVsWigan\Frames\%d.png" -vcodec libx264 "C:\ManVsWigan\encoded.mp4"
I tried multiple video codecs but no luck yet
"-vcodec mpeg4"
"-vcodec mpeg2video"
If you have any idea please help me

The BluRay player leverages parts of Windows DirectShow but won't serve very well as a general player since Windows will load other players for the majority of media formats.
You can get away with a limited amount of tampering of the BluRay's players tolerance of media files until you violate some far away written DRM safeguard and kneecapping the BluRay player from doing anything.
If you're trying to validate your ffmpeg composed tests of your content as part of the editing process, you're better to avoid relying on the BluRay player that is purposed for narrow replay of licensed content and equipped with oversensitive safeguards susceptible to malfunctioning from the invasions of video pirates like you defined by studio executives.
You and I understand you're not a pirate but chances aren't being taken.
Whether you just dowloaded FFmep in the macho exe format or part of the millions of other packages that include it, you can tune your players to codecs pretty easily with the KLite Codec Manager or the Registry.
Chances are you already know about KLite since editing video on Windows eventually requires it and its hard to walk down the street without eventually kiceking over a copy. But just in case you've been living on a Martian cave with your hands over your ears, snag a mirrored copy from: http://codecguide.com /download_kl.htm
I like KLite more than others because it is fairly unobtrusive and avoids stomping over other media tools the way Adobe Premiere or Sony Vegas enslaves Windows and can neuter BluRay codecs without always adequately replacing them. I can cite threads on the matter but just googling for anything such as "Adobe Premier killed my BluRay" or "Sony Vegas ruined Windows" will usually return desperate strings of posts long enough to wrap around Jupiters equator.
For general maintenance of Windows poor codec management, grab this noninstalling executable http://www.nirsoft.net/utils/installed_codec.html to determine if Windows believes it has the same codecs you thought it did and you'll likely be surprised by the fine tuning you'll need to perform.

TS3495 My recent blu ray purchase did not come with a digital copy disc as others have in the past, and no place in the case for one to be either, just came with instructions, so now what?

My new blu ray disc did not come with a seperate digital download dis, now was there even a place for one inside the case, it came with instructions of how to install I tunes, then magically I would be prompted to enter the promo code and have it, no such luck, so now what?

Have you actually followed the instructions?
Did you enter the promo code?
If you did, were there any error messages?

Could the Panasonic 5.1 3D Home Theater System Blu-ray Disc Player be used as speakers on a windows

Could a
Panasonic - 5.1 3D Home Theater System - 600 W RMS - Blu-ray Disc Player be used as only speakers on a windows 8.1 desktop? And if so would it use bluetooth?

Hello coltyn-
Based on the product description, it certainly looks like it may be able to be used as the speakers for your desktop set up. Most likely you will need to buy some additional materials. Unfortunately, I’m not an expert on this, so I would either recommend waiting to see if one of our community members comments on this or you can check with the experts at your local Best Buy store.
Thanks for posting!
Bill|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Satellite P855-33X - canno past the first menu on Blu-Ray Disc Player

Hello,
I have a Toshiba Satellite P855-33X . Whenever I try to play a Blu-ray Disc (3d or 2d) on the Toshiba Blu-ray Disc player, I can never get past the first menu (either language selection or main menu depending on disc). I'm unable to click on the menu or use the keyboard to select the options on the menu, the bluray is unresponsive.
It has worked fine in the past so I'm wondering if there's been a recent update which could have made this an issue?
I have Windows 8, recently updated to 8.1.
Thanks for your help.

> I have Windows 8, recently updated to 8.1.
Im wondering if you have updated the Toshiba Blu-ray Disc player after the update from Win 8 to Win 8.1?
On the Toshiba EU driver page you will find all the Toshiba drivers tools and utilities for Win 8.1.
Usually after the Win 8.1 upgrade, the software should be updated as well.

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

How to get my iPod Classic 160 to work with my blu ray disc player

How do I get my iPod Classic 160 to work with my blu ray disc player?

Whats the model of the blu ray player?
I'm assuming you would have to to buy a dock or AV cables that connects to ipod and correspond with the model of player.

Do this device have Wifi connectivity ? Insignia - Blu-ray Disc Player: NS-WBRDVD

http://www.bestbuy.com/site/Insignia&%23174%3B+-+Blu-ray+Disc+Player+with+Wi-Fi+and+1080p+Output/938...
"Built-in Wi-Fi support For future streaming and product updates."
What does this mean "future streaming" -- does this mean it's does currently work due to a software issue but it has an built-in antenna
that might be enabled with a future update? I'm confused...
I just want to know if this device will connect to my home wireless network.. my network router / hub is no where near the TV and running a ethernet cable is not feasible.
THanks.
Larry

sorry I can't type sometimes
this is what I meant:
What does this mean "future streaming" -- does this mean it's does NOT currently work due to a software issue but it has an built-in antenna
that might be enabled with a future SOFTWARE update? I'm confused...

Samsung Blu-ray Disc Player model BD-P4600

I just bought a Samsung Blu-ray Disc Player model BD-P4600. I was told by the store salesperson that it would work with my Mac on my home wireless network.
I set everything up as directed and cannot get it to join my network. I even went online and looked for information from others who had successfully connected to their home Mac system, however it did not seem to work for me.
I have a brand new Apple iMac running Mac OS version 10.6.2 (Snow Leopard). For my home network, I am using a Comcast cable modem connected to a Linksys Cisco WRT160N wireless N router. I am able to access all 3 home Mac computers, an Xbox 360 and an HP printer through the wireless network, but cannot connect the Blu-Ray player.
The message I receive says "No shared PCs were found."
I am usually pretty good with computer equipment, but I cannot get the Blu-Ray player to recognize the network. I even tried to connect directly to the router via ethernet cable with no luck.
Any thoughts on how I can get this to work?

You might also try turning off the wireless on your laptop and connecting it to the ethernet cable that is going to the DVD player. If you can connect to the internet, you know that you have a good ethernet cable and the port on the router is operational.
If you can't connect using your laptop, it's either a bad cable or connection, or you may have possibly setup Access Control on your router to only allow specified devices to connect on the basis of their MAC address.

BDX3200KB 3D Blu-ray Player not compatible with some 3D movies

I have a BDX3200 3D blu-ray player that is connect to a Toshiba 47VL863 3D TV.
I have noticed recently that a number of 3D movies do not play correctly.
The worst affected ones seem to be "The Hobbit" and "A Turtles Tale", where the 3D movement flickers badly and there is a visible "page turning" effect when switching from one scene to another.
This makes both movies un-watchable.
In an attempt to solve the issue I downloaded the latest firmware for both the TV and blu-ray player, but sadly the problem has not gone away. If, however, I play the affected movies on the same TV but using a PS3, they play perfectly, leading me to believe the BDX3200 is the source of the issue.
I have written to Toshiba support, but have had no reply!
Is anyone else having the same issue? Is there a fix out there that I'm not aware of?
I'd like to know what Toshiba have to say on this issue?
Message was edited by: fatbaldbob

Well Toshibas answer is a bit of a joke really.
They say that the technology used in this 3D Bluray is new and is causing playback problem.....yes and.......Toshibas point is?
My SONY yes PS3 which is NOT yes I repeat NOT a dedicated 3D Bluray player and is almost 8 years old not 2 years like my Toshiba 3D Bluray player can play this 3D Disc without any problems...so the technology is not that new..or can TOSHIBA just NOT be bothered to look after their customers.
People just be warned!!!
Toshibas reply is shown below plus my further reply
"Thank you for your recent enquiry.
We are very sorry to hear about the problem that you have experienced with your new DVD purchase. We understand that recent devlopments employed in 3D technology used on this particular blu-ray have led to issues with 3D playback and the most recent firmware update hasn't rectified this issue.
We have passed on your comments regarding this and future firmware updates may address this issue but at this time we are unable to tell you when this may become available.
We apologise for any inconvenience this may cause."
My reply
"Hello,
I find this completely unacceptable. I purchase this product along with my television in good faith that it would play 3d Blurays...this is obviously not the case it would appear that it can only play certain 3d blurays..perhaps you should consider placing this information in your advertising literature so as to not misinform customers.
My aging PS3 which was made in 2006 and is a games console as you well know can play this 3d Bluray..so it is not new technology that is the problem. My PS3 is not a dedicated 3D Bluray player where as the Toshiba 3D player is designed to play 3D Blurays and yes it isnjust about 2 years old. I think there is something wrong here, and I would like to take this further.
Paul Acworth
A very unhappy Toshiba customer"

HP HDX 16 Blu-Ray discs will not play!

I have researched this Blu Ray issue for days without a real solution. I am running Vista and notice many people feel upgrading to windows 7 was the issue, but I do not believe it is since I am still on Vista, with the same Blu-Ray disc issuey here. Also I do not have Itunes another popular fix. I did upgrade all the drivers I could and all the software I could from HP but did not resolve the issue. I can play regular dvd discs but not the Blu-Ray ones with the exception of 1. Surprisingly it is a newer one also. Updating the Media Smart has also caused a problem with not being able to use the keyboard light at the top to open the dvd drive. (one problem at a time though.)
The DVD Lightscribe drive shows as: HL-DT-ST-BDDVDRW CT10L ATA Device
After years of this issue being a problem does anyone have a real fix solution? Or Does the Blu-Ray player need to be replaced and with what.

Try this document and also run this tool.
Fix problems with CD or DVD drives that can’t read or write media
Your CD drive or DVD drive is missing or is not recognized by Windows or other programs
THX

I want to burn blu ray discs from FVPX, compatible mac burner.

I want to burn blu ray discs from FCPX projects. I note I should be able to but any thought on a mac compatible burner. Why is so difficult to find one??

I would recommend navigating to www.macsales.com, because they specialize in Macs they can point you to devices that should work with your computer. Please make sure you also have software for burning Bluray discs, i'd recommend Titanium Toast.

Blu-ray Disc size not changing.

I followed adobes workflow for final cut to encore cs4 by using compressor to create and MPEG2 Elementary stream Blu-ray file.
now when i take the file (20GB) into encore the blu-ray project and my disc info always says 28 GB. I am trying to trim the end of the video so that the file would be smaller on the disc. I can do this fine with SD DVD's but in the blu-ray even if I make the timeline with only 5min of footage it keeps saying 28GB.
is there something I am doing wrong?
The file says don't Transcode.
I am new to Encore and so far my experience hasn't been great with all the times its been crashing during importing assets and the "General Error" popups.
I am using CS4 with the latest patch

I'm not really the most qualified to answer your question. Since the obsolescence of DVD Studio Pro and the ability to program menus and Steve Jobs saying that BD is a "bag of hurt" and Macs not directly supporting BD, there's been no point for me getting involved with BD creation. Media players (like Roku) will win (IMO.)
Does the disc you made at least play from your Samsung burner?
AVCHD discs are playable on blu-ray players and your final file size is small enough to fit on a regular DVD-r disc. Have you tried just making an AVCHD disc on DVD-r?
You can actually burn blu-ray directly from FCPX OR you can create an AVCHD disc (just select the appropriate Output Device from the Settings tab in the Share dialog.) Simply Share to Blu-ray (you might have to Add Destination from the Share popup menu.) Does burning directly from FCPX make a difference? (I'd hate to have you sacrifice a 25g disc though... that's why I'd suggest trying the AVCHD disc first.)
[I'm sure other people have had better luck, but I have never had a Sony product that I could recommend to anyone. From old CD players to HD TV, everything Sony I ever bought turned to junk... except maybe one of the walkmans which I only keep around for extended blackouts (like hurricanes). After the TV, I finally learned my lesson. I would suspect the players as faulty before suspecting the disc as a coaster especially if it plays from the Samsung burner.]

Qosmio F750 M14L blu ray disc player problem

when i use toshiba bluray disc player . . after just 10 seconds may be less it starts to hang up and to have problems it still plays the movie but hangs up too much . . .i tried to update and even re install but still the problem !

your model does not appear to be a U.S. model and this site is for U.S. models only. I'd suggest you repost your question in the appropriate regional support forum.
L305-S5955, T9300 Intel Core 2 Duo, 4GB RAM, 60GB SSD, Win 7 Ultimate 64-bit

Airport Extreme Utility Disc is not compatible with OS 10.. help please

I recently purchased the Airport Extreme (model A1301) (second hand) to use with my new imac. I didnt realise till I tried to set it up that the disc that comes with it to install the airport utility isnt compatible with OS 10.8.3 version that I am running. So I cant install it. Is there anyway around fixing this so that I can still use the device?

The Airport Utility built into OS X should be able to administer it. If you can't find it in your Utilities folder, you can download it here:
http://support.apple.com/kb/dl1628
Matt

TOSHIBA Blu-ray Disc Player not compatible with USB speakers

Similar Messages

Maybe you are looking for