Toshiba E-Studio 250 FAX PROBLEMS

Hi!
I don't know if this is the place to poste my problem......
I have a Toshiba E-Studio 250, and i have a fax problem.
I have a fax / tel connection from (RDS&RCS - my local provider)
Now, my problem:
When i'am reciving a FAX - my "PHONE LED" is flashing for several seconds and nothing happens.
When i'am sending a FAX same old story, the "PHONE LED" is flashing and nothing happens.
If i push the "MONITOR" button, i hearing the fax tone.
My Toshiba has a "LINE" jack so i split the cable in two - 1 cable goes to the phone and the other in the Toshiba.
Hope you understand my english, is not that good. Thank You an Please HELP! (I'am desperate)

Hi
This is a forum about notebooks issues and options & accessories issues.
So dont think if someone would be able to help you here but I found a user manual for the E-Studio 250
http://www.toshiba-sa.net/download_operator_manuals/e160_200_250/e-STUDIO_160_200_250_Operators_Manual.pdf
Here you can find the Toshiba Support page for Print, Copy, Fax, Scan, and eMail devices
https://electronicimaging.toshiba-europe.com/

Similar Messages

  • Toshiba e-Studio 3511c Possible Solution [aka "eStudio" and "e Studio"]

    Greetings --
    I upgraded to Snow Leopard 10.6 this weekend and just knew that I would have printing problems (I always do when performing an upgrade...) and trolled the message boards to help resolve my anticipated problems with my Toshiba e-Studio 3511c. As my solution does not appear to be reflected in any of the posts that I have seen I thought it might prove to be helpful to post it here.
    First, the Toshiba itself has a variety of network settings. The are accessed by pointing your web browser to the IP address of the copier (my Windows tech guy had set it to a static IP address some time ago to avoid intra-network conflicts and told me what it is; I think that a static address is important so that the Mac always knows where to print to). While I played around with the settings, they did not appear to resolve my problem, and I reset them to the state that I used with 10.5 and earlier versions of OSX, to wit:
    Address Mode: Static IP
    Enable IPX/SPX Disable
    Enable Apple Talk Enable
    Enable Bonjour Disable
    Enable LDAP Disable
    Enable DNS Enable
    Enable DDNS Disable
    Enable SLP Enable
    SMB Server Protocol Enable
    Enable Bindery Disable
    Enable NDS Disable
    Enable HTTP Server Enable
    Enable SMTP Client Enable
    Enable SMTP Server Enable
    Enable POP3 Client Disable
    FTP Client Default Port Number 21
    Enable FTP Server Enable
    Enable SNMP Enable
    I don’t know what most of these mean nor the effect on printing for any but will be glad to provide additional detail to other hapless users of e-Studio 3511c’s -- simply e-mail me at [email protected].
    Next, download the driver package from http://www.copiers.toshiba.com/support/downloads.jsp?site= ; I downloaded “- dmg.gz - Mac OSX (from 1.70 CD) 06/14/07 1.70” and installed it. Unlike other posters, I received no error messages. Like other posters, I had to take this step because 10.6 deleted my old PPD’s.
    Then, do the “Add Printer” thing from System Preferences's "Printer and Fax" control panel. After flailing about for quite a while, I found the following worked:
    IP printing
    HP Jetdirect - Socket
    [my Toshiba’s static IP address]
    Amazingly (to me, anyway), the PPD was immediately identified and placed in the “Print Using” selector (it is the 4511 driver and there are two versions -- if you are in the U.K. I assume that you would use the U.K. version, I used the “other one”). (I was also quite shocked that the "HP" setting worked -- this is obviously not an HP printer!)
    Anyway, the click “Add” and perhaps select your Toshiba's add-ons, if any.
    If anybody has any questions about this “stuff,” please feel free to e-mail me directly at [email protected], as I do not really monitor these message boards.
    I hope this helps!
    -- Kevin

    Hi dude
    Here on this page you can find the Toshiba page which provides manuals and software for printers, fax, etc
    https://electronicimaging.toshiba-europe.com/
    In User Manual options please choose:
    Document Managers -> E-Studio 160
    Here you could find some user manual (Network, Printers, etc) which could help you to sort out this issue.
    Good luck

  • Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7

    Adobe Reader does not print more than 5 pages Toshiba E-Studio 232 in Windows 7.
    I contacted Microsoft representatives said the problem is the Acrobat Reader once all other applications print without problems.
    Please help me!

    We have the same problem with our TOSHIBA e-STUDIO6540C. We've tried different versions of adobe reader, even acrobat and many times it will only print some pages of any given document. Did you find a solution? To me it sounds like a toshiba issue but just wondering.

  • Toshiba E-Studio 603 stop working after Mavericks Upgrade

    At my work place we have a department shared printer through cable ethernet. I've got my rMBP hooked up by a USB ethernet adaptor to the network. The printer used to work properly with drivers installed (official from Toshiba) under Mountain Lion.
    However after I upgrade to Mavericks, whenever I print the Printer job will say "Printing - Connecting to printer" then freeze for a couple of minutes until says "The printer is not responding" and freeze forever unless I close the Printer job window.
    I've tried reinstalling the driver, resetting printer system then add the printer back, reinstall system, etc. Also I'm pretty sure that the department code fields are entered and selected everytime I tried. Thus far no solution.
    Has anyone experienced similar issue? Or has anyone got solutions? This has been really frustrating to me. Thanks!
    Steven

    Thanks for responding. Before adding the printer I'll install their driver and select the one from list. There's the option for toshiba e studio xxx, so I wasn't selecting anything else.
    Anyway the problem is it used to work the way I set up in mountain lion, but not in mavericks.

  • Toshiba E-studio 160 - LAN interface password

    I have a toshiba e-studio 160 series, with ethernet card.
    As i have to change tcp/ip options, i need to know the password!!!
    (please, don't ask why i dont' know it :_| )
    I read somewhere that should be possible to show the admin password by:
    1 - powering the machine in TEST MODE (pressing 0&8 while powering)
    2 - typing 263 and pressing START
    Point 1 it's ok, but point 2 doesnt' return any information.
    Maybe the page where i read this trick was for another model, different than e-studio 160, and so i have to type another number..
    I hope that someone could help me :)
    thanks
    Matteo

    Hi dude
    Here on this page you can find the Toshiba page which provides manuals and software for printers, fax, etc
    https://electronicimaging.toshiba-europe.com/
    In User Manual options please choose:
    Document Managers -> E-Studio 160
    Here you could find some user manual (Network, Printers, etc) which could help you to sort out this issue.
    Good luck

  • E-Studio 160 printing problems / factory reset

    Hi,
    I've got a Toshiba e-Studio 160 copier. After trying to connect it to an office network and after shutting it down, I lost the settings that I had set up on my copier. Now every time I use this copier I get "cut" copies; I mean that the copies printed by the e-Studio160 don't include the whole original document.
    Does anybody know how I can set up the printing borders or how I can do a factory reset?
    Thanks a lot.

    I see that nobody were able to provide you a proper solution to your printing issue.
    I found e-Studio 160 user manuals (Local and Network Operator's manual)
    http://www.eid.toshiba.com.au/n_manuals16-160-20-200-25-250.asp
    I would recommend you to check these documents. Probably you will find the details in such documents how to print borders or how to do a factory reset

  • Fax Problem on HP laserjet 200 color MFP M276nw

    HP Laser Jet 200 color MFP M276nw
    fax problem
    I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax  on my HP200 Color MFP
    Has anyone had this problem?

    Hi @ColtraneII, 
    I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
    I can help you with this issue today.
    Check these settings for the fax:
    Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
    Go to the wrench icon/service /fax service/error correction/turn it off.
    Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
    Go to wrench icon/service menu/fax service/clear saved faxes.
    If you are still having issues, then follow this document for checking the connections and settings for the fax.
    Cannot Send or Receive Faxes.
    Sorry for all the questions, but it will help to resolve this issue quicker.
    What were the results of the fax test?
    Are you able to send or receive faxes?
    What type of connection do you have? (Analogue, DSL, Cable Modem)
    Are you using the 2 wire fax cable?
    Do you have distinctive ring set up on the line?
    Is there any voice mail set up?
    Do you have a answering machine? (Where is it connected to?)
    Where is the fax cable connected to? (modem, wall jack)
    Is there a phone also connected the printer?
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Fax Problems

    Hi
    I am experiencing Fax problems in my Cisco Voice network.There are about different problems for each fax machine.
    All the fax machines are the same model.
    1. Faxes unable to send out to external lines
    Faxes call an outside line, when the remote fax connects, after a minute of negotiation, the call drops, fax says 'Communication Error'
    2. Faxes send mulitple copies of the first page
    Faxes call an outside line, when the remote fax connects, but then the fax thinks the call has failed, but has sent the first page. It then tries to resend with the first page being resent again and again.
    This has been affecting the faxes on the VG224.
    If you need to any information to find a solution please reply me back.
    Thanks
    Vino

    To allow the ports on the specified network module for Voice or WAN interface card to use the network clock for timing, you need to use the network-clock-participate command as mentioned previously.
    However, each port can be selected as the clock source with the network-clock-source command.
    This configures the appropriate interface to supply clock to other ports or network modules that you have chosen to participate in network clocking with the network-clock-participate command.
    For example, say you have configured a vwic2-2mft-e1-t1 as follows:-
    network-clock-participate wic 2
    network-clock-select 1 E1 0/2/0
    This synchronises the clocks for both port on the dual e1/t1 from 0/2/0.
    Therefore if you have a separate vwic and wic in the same router, then do not specify one or the other with network-clock-participate.
    This will essentially exclude it from synchronising the port. The port would then resort to using the clocking method stipulated under the controller, normally either line or internal.
    Hope this clarifies the situation.
    HTH
    Allan.

  • Scanner and fax problems with the Officejet 7410 AIO

    Hi
    I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
    Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
    Thanks
    Bye
    balubeto

    Hi balubeto,
    Welcome to the HP Forums!
    I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
    I would recommend the following:
    Run the HP Print and Scan Doctor, to diagnose the issue.
    Uninstall the software. Uninstalling the Printer Software.
    Re-install the software using the HP Printer Install Wizard for Windows.
     Hope this helps, and have a great day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Toshiba Gigastore 250 GB: Problems to delete files

    Dear all,
    I can't delete files from my Toshiba Gigastore anymore. Every time I try, the following message appears: "Cannot delete. Access denied. Source is probably still open".
    However, the files are not in use when I try to delete. I tried to delete after a reboot, and tried as admin. Nothing works.
    The problem started to occur after the Gigastore got disconnected from the computer (hot plugout).
    My OS is W2K SP4 (with the latest security updates). The GigaStore didn't run properly from the beginning, as it is not possible to disconnet the USB when the system is running (this problem is known and described in the user manual).
    Howe can I overcome the problem without reformatting the drive? Maybe it is possible to boot linux and delete files on the GigaStore? Is that advisable, as linux doesn't seem to go along well with NTFS?
    Many thanks in advance,
    Led
    Keywords: Toshiba Multi Media Center Gigastore 250 GB, delete, file in use, Windows 2000 SP4

    Hello,
    many thanks for your advice. The issue is solved now.
    Going through your replies, I investigated why the files could not be deleted. I found that something happened with my user rights since the hot plugout: The system just 'took' the 'write' rights from existing files. However, I was able to read and execute existing files, and write _new_ files.
    A subsequent login as Admin with re-assignment of 'write' rights worked fine. (However, I am sure that I have tried this earlier, but it did not work at the time).
    Again, many thanks for your help. Best regards,
    Led

  • Toshiba E-studio 200s driver for Windows 7 64bit

    I have printer/scenner /fax e-studio 200s , but there is no driver for my new Windows 7 64bit. I`m searching on Toshiba web site, but no results
    Can you help me ?

    This driver was very hard to find. I have the 200s e studio but the installation cd was lost. it was almost impossible to find this driver, but finally I managed to stumble upon it. So I want to help you all you seekers.
    Here is the download link.
    http://www.eid.toshiba.com.au/n_driver_es162025.asp
    Thanks
    +Message was edited: dead link has been replaced+

  • HP Officejet Fax problem

    I recently brought a HP Officejet Pro 8500 (910n) and cannot use it to fax. The printer's FAX troubleshooting told me the following. That I had two lines (4 wire) system in my house. To be able to fax I needed a 4 wire to 2 wire adapter or connection cable. The printer comes with a standard 2 wire (two center wires only) plug.
    Has anyone ever had this problem before? Has anyone ever heard of a 2 wire to 4 wire adapter or cable?
    The troubleshooter also had the United States listed as one of the countries having this problem.

    HI,
    Disconnect all cables and connect directly to a different wall outlet and try again.
    Although I am an HP employee, I am speaking for myself and not for HP.
    --Say "Thanks" by clicking the Kudos Star in the post that helped you.
    --Please mark the post that solves your problem as "Accepted Solution"

  • Crystal report for visual studio 2005 dblogin problem

    Dear Sir,
    I am using Visual Studio 2005 and crystal reports for visual studio 2005 and sql server 2000.
    When I am running the project from my pc where it was developed and a local server with server authentication, report is opening but from client machine there is a new screen come before opening the report asking for login issue. my reports has subreports
    also.
    I am using dsn file to connect with server from crystal reports where dsn file contains as follows:
    [ODBC]
    DRIVER=SQL Server
    UID=sa
    PWD=sa
    DATABASE=HRISDB
    WSID=S-AGD-PAY01\HRSERVER
    APP=Microsoft Data Access Components
    SERVER=S-AGD-PAY01\HRSERVER
    so it is dynamic bcoz i need change server name sometimes.  my question is when same report want show user from their pc then below screen appears:
    database login
    server Name: C:\program files\HRIS\HRISDB.dsn
    Databse: HRISDB
    user id:
    PassworD:
    Integrated Security: it is checked and a finish button.
    (i am sorry bcoz screenshort is not attaching so I write above what in the diagloag box for you)
    then i need to uncheck the use integrated security and click finish then the reports come. THis is very annoying for my clients.
    Please help me how can I overcome it.
    It is mentionable that I didn't use any dblogin method in my code to like setdbloginforReport(). I think there is no problem bcoz the report show correctly. Just want to know how to overcome this screen.

    You know, this forum is for controls, apis, components for the user interface Windows Forms.
    Unlucky enough, Microsoft does not support Crystal reports anymore for many years.
    Try the Crystal reports forum for .Net
    http://scn.sap.com/community/crystal-reports-for-visual-studio 
    Success
    Cor

  • Can anyone help; re: Faxing problems with my 6200 all in one

    Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
    when a fax is being received or when we are sending one.  When the fax fails and we stop the blinking lights, it self tests then turns off.  Sometimes when it does this we get an error message printed that says "Power Failure."  The party being faxed gets 1/2 a fax or 1 page out of 5.  I'll unplug it from the electric and plug it back in and then it will work fine for a day or two.  We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't.  We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
    Any ideas???  The machine is 5 years old and has never given us any trouble until now.  Is it time to upgrade?
    Thanks so very much!!!!
    Joanne

    I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA,  using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

  • HP Officejet 6500 709n network scanner & fax problems

    I have a HP p7-1298cb desktop computer that came with Windows 7 and I installed the HP 6500 709n to it successfully. Have a home network with several computers and they all use the printer. The printer was connected to the network with and RJ45 cable. I reciently upgraded my HP desktop to Windows 8 and only that computer has problems with scanning and faxing to this computer. I reinstalled the software (OJ_AIO_6500_E709_Full_Win_WW_140_408)  several times HP desktop using wireless connectivity, wired connectivity and USB connection. Only the USB connection works with all of the printer functions, both wireless and wired only can print. The errors I get with the network connection are the following:
    The scan cannot be performed because another program or computer is using the networked HP image device. Try again later. (from HP Solution Center)
    Scan communication problems detected. You may experience limited functionality when scanning from your printer to your PC.
    If you are using firewall software, verify TCP port 9500 is unblocked from your PC to your printer at 172.17.1.36.
    If you are using firewall software, verify TCP port 9290 is unblocked from your PC to your printer at 172.17.1.36.
    To fix the issue(s) try to power your printer off and on. (This message is from the installation)
    I have added those ports to my firewall and it doesn't have any effect, I also turned off the firewall on the HP desktop and it also has no effect.
    I have searched this discussion board and have found similar issues without a resolution.

    Hi Moondoggytoo,
    It looks like you need to do a full scrub of the printer software and re-install it.  An issue like this can happen following an upgrade to Windows 8 when a printer was already installed.  I have enclosed steps needed to take that will clear out programs that are no longer needed.  This should allow for a clean start with a new install.  Let me know how it goes.  
    Good Luck!
    These steps should only be used on a Windows 8 computer.
    Try using the scrubber built into the Download. 
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.  Select Windows 8 32 or 64 bit, click Next and select the Full Feature Software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3795406&lc=en&cc=us&dlc=en&lang=en&cc=us
    3. Once the download is done extracting, cancel the download.
    4. Press the Windows key and then the “R” key.
    5. This will bring up the Run window.
    6. Type %temp% in the run field
    7. Look for, and open the folder starting with 7z (Example: 7zS2356)
    8. Open folder Util
    9. Open folder CCC
    10. Run the Uninstall_L4.bat
    11. When the uninstall has completed restart the computer
    12. Run Disk cleanup from Accessories\ System Tools
    13. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads​.html
    14. Use this tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    15. Download the full feature software and drivers.  Select Windows 8 32 or 64 bit, click Next and select the Full Feature Software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3795406&lc=en&cc=us&dlc=en&lang=en&cc=us
    16. Run the download to reinstall the printer
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

Maybe you are looking for