Toshiba L4353 39" - USB Movie Playback Problem

Hi,
I recently bought a Toshiba L4353 39" smart tv, the usb playback does work but i keep having this really annoying problem,
basically i'm watching a movie file and everything is fine and then for no reason the playback of the file stops and i'm back at the my content screen, this has happened on multiple films and have tried a few different HDD so i can only assume it's the TV, help?
Thanks, Martin

Did you test the movie playback using an USB flash memory stick or just USB HDD?
Does this issue appear playing movies supporting different file format?
In the [user manual page 89|http://www.toshiba-om.net/LCD/PDF/English/L4353-323950-English.pdf] you can find information about the file compatibility
Please check if the movie files are encoded properly and use the supported video and audio codec

Similar Messages

4GB Toshiba TransMemory U2M USB Flash Drive problem

I would like to ask you to get help about one of your products that i bought few months ago.
I bought a 4GB Toshiba TransMemory U2M USB Flash Drive (enhanced for Windows ReadyBoost)
Supports the ReadyBoost function of Windows Vista
Write Speed: up to 3.9 MBytes/s
Read Speed: up to 21 MBytes/s
Large storage capacity
award-winning premium quality
5 years warranty
Which of specifications are written as above.
After I bought this product I used it to save some documents which includes some very important documents for my studies.
Now I have trouble with the product and can not get my documents.
The product cant not response when I plug in to computer.
I tried Toshiba USB Flash Drive some other computers also but it cant response in any case.
Is there any way to solve the problem and get my documents back. It did not damage or break.
thank you..

Hi
Usually if the HDD would start to malfunction then the data on this HDD are not more accessible and in most cases you cannot backup this data to any other place.
Of course there are many specialists and companies who could retrieve and could save the data from damage HDDs but this is very expensive procedure and dont think its worth to spend a lot money for private data..
However, you can get in contact with an local ASP (Toshiba authorized service partner) if your Toshiba product start to malfunction and is covered by warranty..

Movie Playback Problems - works on one machine, not another

Embeded a Windows Movie Maker using Acrobat 9. Works on my machine, but not another. Both are Windows machines. The other machine gets an error message.
What could be the problem?

I embeded a wmv file -- just because that's what i created the file with.
I think I may have solved the problem -- I converted the wmv file into a
flv for acrobat 8 and higher, then embeded movie file into the pdf.

Movie playback problem for PC iTunes

Hello,
I recently began having an issue with playing movies in iTunes. For some reason, I am no longer able to play music videos / movies in my iTunes.
When I click to play the movie, the screen is completely back and the timer / play length, is already at the end of the movie. However the movie does start at the correct spot, as I am able to very briefly hear the audio. Additionally, if I were to scroll through the movie I could see the visual, however if I click to a certain area I will just see a frozen frame and the movie will fail to play.
I followed all the trouble shooting steps listed by apple and other steps like making sure all the software is up-to-date, etc.
Anyone have any similar issues or advice to tackle this problem?
Any help at all would be appreciated.
Regards,
Jordan

I have similar problem on both my Windows 7 Laptop and XP desktop. Movies will not start in my case, but if i use Windows media player they work fine. Both running the latest 10.x. version

IWeb '08 movie playback problem on Windows

Hello,
I used iWeb '08 to create a Photo Page that I've uploaded to my .Mac space. The Photo Page is mostly photos, but also contains two movie clips. One is a 1 MB .AVI file. The other one is an 8.7 MB .m4v file.
When I load up the photo page in Firefox or Safari on my Mac, everything works like a charm. However, when I view it in Firefox or IE6 on my husband's Windows XP machine (which does have Quicktime 7), a strange problem occurs. The video plays, but then immediately after it finishes, it goes to a white screen. The address bar in the browser reads: javascript:PhotoViewDonePlaying(0). The screen is all white except for one word at the top which says "false."
Has anyone else encountered this and is there a way to fix it? Obviously, a lot of our friends are going to be using IE or Firefox on Windows machines to view our page and we'd like this not to happen to them! I would appreciate any ideas or suggestions.

Yup, I've just encountered exactly the same problem. The good news is that updating to the latest QuickTime (on Windows) seems to have fixed the problem for me, so you might want to try doing an update...

ITunes HD movie playback problems in Windows 7

I don't understand why this is happening...
I purchased Guardians of the Galaxy in HD, and iTunes on my Windows 7 machine more or less crashes every time I try to open it.
The machine is running Windows 7 on an Intel Core i5 2570k with 8GB of ram, with the OS running on an SSD and the media on 3TB WD Red NAS drives in Raid 1 using Intel 3000 integrated graphics. In other words, it should be more than enough to play a freaking 1080p movie.
It looks like iTunes is using about 20% CPU for minutes trying to load the movie and becomes completely non-responsive as soon as I click play.
I've tried:
Uninstalling iTunes and Quicktime, then reinstalling
Turning off Direct 3D acceleration
Repairing both iTunes and Quicktime
Updating my graphics driver
Checking my drives for errors
Turning off WiFi sync across devices
I can play other media that's 1080p without a problem. The file is 4.2GB, but the filesystem is NTFS which shouldn't have a problem handling it.
Pretty frustrated right now; playing a movie shouldn't require this level of effort.

I'm exeperiencing the same issue. HD video's in iTunes/QuickTime do not play smoothly, audio is fine, but the video is not smooth. SD video in iTunes/QuickTime is fine, as is any content played through VLC (HD or SD). I've already tried a fresh 10.9 install with the same issues.
Mac Pro (2010) w/ ATI 5770

I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?

I have a Shockwave Error: "This Shockwave movie has errors that have caused playback problems. Please contact the author of this content regarding this problem. Shockwave is unable to continue." What I can make ?

This is some built-in "protection" that was engineered into Shockwave some years ago. It means that SW will ignore the first 10 script errors then throw the dialogue you are seeing. You really will have to contact the developer of the content in question to have it fixed - there's nothing anyone else can do. The developer needs to replicate your error, determine the cause, rectify it and republish their movie

Problem description: My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed

Problem description:
My iMac (early 2008) with OS 10.10.2 runs slow. I have run EtreCheck several times, and I am unable to move beyond Problem System Launch Agents (11 processes killed due to memory pressure) and Launch Daemons (12 processes killed).
EtreCheck version: 2.1.8 (121)
Report generated April 14, 2015 at 9:50:48 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    iMac (24-inch, Early 2008) (Verified)
    iMac - model: iMac8,1
    1 3.06 GHz Intel Core 2 Duo CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR2 SDRAM 800 MHz ok
        BANK 1/DIMM1
            2 GB DDR2 SDRAM 800 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    NVIDIA GeForce 8800 GS - VRAM: 512 MB
        iMac 1920 x 1200
System Software: ℹ️
    OS X 10.10.2 (14C1510) - Time since boot: 4 days 20:29:22
Disk Information: ℹ️
    Hitachi HDS721010KLA330 disk0 : (1 TB)
        EFI (disk0s1) <not mounted> : 210 MB
        Mac iBook HD (disk0s2) / : 999.35 GB (521.60 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
    Apple Inc. Built-in iSight
    Apple, Inc. Keyboard Hub
        Apple, Inc Apple Keyboard
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
Configuration files: ℹ️
    /etc/sysctl.conf - Exists
Gatekeeper: ℹ️
    Mac App Store and identified developers
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.CallHistorySyncHelper.plist
    [killed]    com.apple.coreservices.appleid.authentication.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.Maps.pushdaemon.plist
    [killed]    com.apple.printtool.agent.plist
    [killed]    com.apple.SafariNotificationAgent.plist
    [killed]    com.apple.sbd.plist
    [killed]    com.apple.scopedbookmarkagent.xpc.plist
    [killed]    com.apple.telephonyutilities.callservicesd.plist
    [killed]    com.apple.warmd_agent.plist
    11 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.AssetCacheLocatorService.plist
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.icloud.findmydeviced.plist
    [killed]    com.apple.ifdreader.plist
    [killed]    com.apple.nehelper.plist
    [killed]    com.apple.nesessionmanager.plist
    [killed]    com.apple.periodic-daily.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.softwareupdate_download_service.plist
    [killed]    com.apple.wdhelper.plist
    [killed]    org.cups.cupsd.plist
    12 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [running]    com.adobe.AdobeCreativeCloud.plist [Click for support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [loaded]    com.adobe.SwitchBoard.plist [Click for support]
    [running]    com.arubanetworks.via.NetworkMonitorLaunchd.plist [Click for support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
    [running]    com.spotify.webhelper.plist [Click for support]
User Login Items: ℹ️
    ChronoSyncBackgrounder    Application (/Library/Application Support/ChronoSync/ChronoSyncBackgrounder.app)
    Dropbox    Application (/Applications/Dropbox.app)
    Canon IJ Network Scanner Selector2    Application Hidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
    Google Drive    Application (/Applications/Google Drive.app)
Internet Plug-ins: ℹ️
    Google Earth Web Plug-in: Version: 6.1 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 [Click for support]
    Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 [Click for support]
    OVSHelper: Version: 1.1 [Click for support]
    AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    DivX Web Player: Version: 3.2.4.1250 - SDK 10.6 [Click for support]
    FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.134 - SDK 10.6 Outdated! Update
    iPhotoPhotocast: Version: 7.0
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
    JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
User internet Plug-ins: ℹ️
    WebEx: Version: 1.0 [Click for support]
    Google Earth Web Plug-in: Version: 7.1 [Click for support]
3rd Party Preference Panes: ℹ️
    Adobe Version Cue CS2 [Click for support]
    Flash Player [Click for support]
    Flip4Mac WMV [Click for support]
    VIA PrefPane [Click for support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
         3%    WindowServer
         3%    Mail
         2%    com.apple.iCloudHelper
         1%    Creative Cloud
         1%    Google Chrome
Top Processes by Memory: ℹ️
    223 MB    Google Chrome
    150 MB    Finder
    129 MB    Google Chrome Helper
    112 MB    Mail
    69 MB    Google Drive
Virtual Memory Information: ℹ️
    35 MB    Free RAM
    1.45 GB    Active RAM
    1.45 GB    Inactive RAM
    888 MB    Wired RAM
    27.01 GB    Page-ins
    851 MB    Page-outs

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Windows 8 USB 3.0 Problems

I have run into many USB 3.0 problems across multiple devices and computers running Windows 8 Pro 64-bit. After many headaches and sleepless nights I think I have narrowed all the problems down to one thing in Device Manager:
"Intel (R) USB 3.0 eXtensible Host Controller -0100 (Microsoft)”
The controllers (Multiple Computers) have had problems with all the Microsoft Drivers including the most resent: 6.2.9200.16548 3/1/2013
The problems:
USB 3.0 External Optical Drives (labeled Windows 8 compatible) not recognized or continuously disconnecting/reconnecting with or without manufacturers drivers.
USB 3.0 Flash drives running slow and/or disconnecting often with data corruption/loss
USB 3.0 Flash drives not recognized
My solution: <Disabled> “Intel xHCI Mode” or “XHCI Pre-Boot Mode” in BIOS/Firmware
This solution Takes the
"Intel (R) USB 3.0 eXtensible Host Controller -0100 (Microsoft)” out of Device Manager and eliminates all the problems stated above across multiple machines running Windows 8 Pro 64-bit.
However: This is not a fix.
The Intel USB 3.0 controllers on the machines seam to only run at 2.0 speeds. (Before they were also slow but much less functional, often not recognizing devices)
Non-Intel USB 3.0 controllers are fully functional at full USB 3.0 speeds. (Before they had limited or no function depending on the controller)
This appears to be a fix for non-Intel USB 3.0 controllers but what about the Intel controllers that take the lion’s share of USB 3.0 controllers on the market?
Dose Microsoft have a fix for
"Intel (R) USB 3.0 eXtensible Host Controller -0100 (Microsoft)”
Is there a new Microsoft driver coming out soon? How about an Intel driver for Windows 8 like the one they have for 7?
Am I the only one who is being slammed with this problem from every windows 8 machine I touch? I have not seen a large amount of discussion on the internet with such a seemingly big thing like USB 3.0 not working with Windows 8!

Hi I guess I am going to add a few more flies to the ointment.
I have a serious issue with USB 3.0 and I would like to hope that somebody may have an answer even if they are unable to help.
I run three different computers, for three completely different purposes, they are of different makes, One is an Acer, the other is a Pryon and the third is a Toshiba, I also have 2 Toshiba laptops, one brand new running Windows 8, the other running
Windows 7. So basically what I am saying here probably has nothing to do with the systems I am running.
I guess a lot of people are getting swindled here by the hard drive manufacturers and everyone here seems to be blaming it on windows. I have spent thousands of dollars replacing all my old 2.0 drives (and some were getting a bit tired) with these new fangled
super duper super fast 3.0 drives. I think overall in the past year I have bought around thirty of them, mostly portables, but some desktop ones, all different brands too I might add, Seagate, Western Digital, Toshiba and Samsung. This as you can imagine has
cost me a lot of money. The data I had on the old 2.0 drives equated to about 20 years of my life. Out of the roughly thirty I have bought, nine of them have bit the dust so to speak. Nearly all, once they become unusable, come up with the same thing, "The
last USB device you connected to this computer is not recognised.
As an example I will recount exactly what has occurred with the last one to fail, which was today about 4 hours ago as I write this. It was working perfectly fine this morning, never gave off one indication that it may be about to fail. Then after a restart
(which incidentally I am wondering if anyone else has this problem whereby once they shut down their computer they have to either power off or remove every USB 3.0 device from their unit before the computer will even start - this happens on two of mine - but
not on the Toshiba)
So I shut down, I am using a powered 9 port hub for most of the portables on this particular system (Pryon) which I have to power off so all the drives disappear else the computer just hangs at the boot screen until I have done this) I have one 2,0 disc
connected which I don't need to remove for the system to start.
Anyways once I have restarted the computer I then re-power up the hub and all the drives are loaded again and away I go. Well that was all good except when I checked one of my drives was missing from the File manager that I use (Salamander) and also not
showing in Windows Explorer either. So I trace down the culprit, unplug it and re-plug it back in. Lo and behold up comes the afore-mentioned windows does not recognize this device. This is odd given that there are five other drives of the exact same make
and model attached to the same hub still working. As I don't have all the slots in the hub filled I decide to change the slot and plug it into a different one. Same result. So then I decide to plug it into a 3.0 slot connected directly to the box, same result.
As a last try I then plug it into a 2.0 slot on the box, same result. So then I take it out and try it on the other two boxes and eventually the laptop...same result....
I now have nine of these contraptions all totally useless to me....yes I guess I could send em back to Seagate and Toshiba and Western Digital and they will replace em with a brand new one...clean as a whistle with my twenty years up the poop chute....
I have looked everywhere through Google trying to find someone or somebody with the same problem as me, surely I cannot be the only person in Australia that happens to keep on getting the duds.
I've had 2.0 drives that have lasted ten years or more and probably may have went another ten if I didn't keep so called upgrading....some of these that have failed on me are not even 3 months old. I even had one desktop 3.0 drive that I bought on the Wednesday
in Adelaide and by the time I had gotten it home after my son had copied some stuff onto it..it wouldn't work.
I have tried just about everything I've ever read on these forums, like using a different cable, Ive even pulled one of the portable to pieces to be able to use an attachment that I can plug it directly into a 3.0 slot and still nada....
My newest laptop is still under warranty and I have had that back to the supplier twice with a main hard drive failure which they have had to replace.
The reason why I am suggesting here that it may not be all windows fault is that my other laptop is still running windows seven and once a drive cacks it it wont show up in that either....I will say this though, I only have one drive that I use in that laptop
and that is still running well.
Now before everybody jumps down my throat I have checked thoroughly for viruses on all my boxes, and they all are clean. And in anycase I've never heard yet about a virus that can attack one hard drive only, given that all that is on there is music, just
like the other six.
Unless windows eight itself somehow manages to render a hard drive useless somehow then it has to be a fault in the manufacturing technology and that even though a drive might work perfectly for a week or two there is something there that the manufactures
are missing in their testing.
Like someone said earlier, maybe it is going to take some massively big law-suit from a huge company that has lost everything against somebody for them to realise that USB 3.0 is tainted and no good.
Do they still make 2.0 cause I am going back there and hopefully I can do it before I lose everything, even though it will take a good part of six months to copy back over whatever it is that I still may have left....
Like I said I don't expect any answers but thank you for taking the time to at least read this...
Cheers Vern

Playback problem - video playback stops; any suggestions?

I have distributed about 20 copies of a DVD I made using iMovie and iDVD v4.x - and about 5 of the discs are reported to freeze during playback. Because not all of the 20 discs have been viewed, it's possible the percentage of discs with playback problems may be even higher. No two discs are freezing at the same spot, or even in the same movie (there are 3 short movies on the disc).
I got no errors during burning, but I did not 'verify' each disc after burning, either. I did play back my 'master' disc on my home DVD player to make sure it was OK before using it to create a disk image - which I used to burn all the other discs.
Some of the discs I burned from the disk image using Toast Titanium 6.1.1, until I discovered Apple's Disk Utility was actually a little faster. No way to tell now if the 'bad' discs are all from the same burn software. Though both Toast and DU gave me an option to burn faster than the rated speed, I used the rated burn speed of 8x, and I did not do anything else on the Mac while burning the discs.
My first thought was bad media. I used both Memorex and Sony DVD-R media (Taiwan) - there is no easy way to for me to find out if all the 'bad' disks are one brand or the other - but hopefully these brands do not have a 20% rate of defective discs.
My second thought was format-player incompatibilities (-R vs +R), but replacement discs, using the same media on my end, solved the problem for most people (one person's replacement disc froze, but at a different spot than the first one).
My final guess - I wonder if the playback problems might have something to do with the stick on labels I used? These are a Memorex brand product called "CD&DVD" labels, but the fine print on the back says: "Warning: Using a Standard or Full-Face label on DVDs may result in the disc becoming unreadable."
Any solutions?
Quicksilver G4, 867 Mhz Mac OS X (10.4) Pioneer DVR-108 (not OEM), firmware 1.20, PatchBurn profile

I just wanted to add my 2 cents. I haven't been on this forum for months. I've been happily making DVDs in batches of 10 -50 to distribute. I've been making them in my emac. Occassionally I'd get ones that wouldn't play in a client's player. The solution was to send a replacement. Usually that worked. Often I'd send a replacement that wouldn't play in one client's player but found that the disk would play in another client's player. The worst case was when the ist three DVDs I sent to one person wouldn't play, but the fourth did. But most of the time, the second one I'd send worked fine (All of these were made in the same batch from the same media (usually Fuji or Verbatim).
Recently I started getting lots more than usual complaints about problem DVDs. I checked out a bunch of them by actually playing them on both my computer, and a stand alone Cyberhome player. They were all made from a particular batch of Fuji media. Now I've previously burned hundreds of playable DVDs made from Fuji media, so I imagine it is just a fluke. (I hope) Some of them would play perfectly all the way to the last 5 minutes of an hour long presentation, and then start stuttering. Some begin stuttering in the middle. Several wouldn't even start up in my cyberhome player. Most of them would end up freezing at some point during the stuttering. The stuttering was never at the same exact place on any of the DVDs.
As an aside, I discovered something that I didn't know was possible. When a DVD froze in my cyberhome player at the menu stage, I'd push the eject button, remove the DVD, and the menu frame was still visible unchanged on the TV until I turned off the player or put another DVD in! I guess there must be some sort of cache in the player that stores the image. Very interesting. I've never seen that with a normally functioning DVD.
I also played each defective DVD in my computer to compare. One or two managed to play all of the way through on the computer, but most exhibited similar misbehavior on my emac. I'd say that, in general though, they all played a bit better on my computer.
Then it occured to me that there was another possible explanation. I was burning these from a disk image file that I had stored on an external HD. Whenever I needed a new batch of DVDs I would copy the disk image file back onto my emac from the external drive, and use disk utility to burn the disks. What if the disk image was corrupted? That might explain the problems.
Another thought that occured to me was the perhaps the process of burning a dozen or more DVDs in a row might cause a heat buildup in the burner and affect the burning in some way.
So I retrieved a good DVD made in an earlier batch of Fuji, made a new disk image of it, and left the image on the computer and didn't transfer it back to the external drive (on TDK media, because that's all I had sitting around), played the copy back on both my computer and Cyberhome player to make sure it worked perfectly. I then generated another dozen copies.
You may wonder how I had enough time to do all this. I'd just put a DVD in the player or my emac and listen to it while doing my ordinary office work. If I heard stuttering(it was my voice on the DVD) I'd instantly notice. I did this all day for a couple of days.
So anyway, I played 5 finished TDK disks all the way through today and they played perfectly. I guess the next test is to use the disk image of the same DVD from my external drive to see if i also get a good burn from it on the same TDK media and burner.
I did have time to do one other test though. I took a couple of DVDs that played well and put paper lables on them using the stomper system. They still played perfectly on both my computer and Cyberhome player. I'd speculate that paper lables are probably okay if they are applied perfectly, perfect centering, no air bubbles, good contact, and the disk stored in clean dry area. I've seen other peoples' CDs or DVDs with paper lables that had become wrinkled from exposure to high humidity and/or heat. I can imagine that they would tend to malfunction.
One client with a certain brand player actually took the "offending" DVD down to a AV store, and bought a replacement player that WOULD play it. I do think that it is interesting and useful to know that one brand player will play a particular particular DVD and another won't.
Since I make batches, I'm considering buying a couple more different brand DVD players, and then doing a bit of quality control - Trying out sample DVDs on all players before I mail out a batch to clients.
I hope that my observations might be useful for others.
emac 1ghz superdrive Mac OS X (10.3.9)

ITunes movie playback, audio and video not in sync after upgrade to Mountain Lion

After upgrading to Mountain Lion I have problems with iTunes movie playback, and the audio/video at times stalls/delays, or skips a few seconds, or even gets out of sync. I feared this problem was isolated to my machine until I saw an article online: http://reviews.cnet.com/8301-13727_7-57489874-263/sound-stuttering-after-mountai n-lion-installation/. I have 2011 iMac 27" with 16G RAM and am running the latest iTunes and Mac OS X software, and shutting down extra programs doesn't help. Please let me know of any solution.

I also have this problem, and some videos will no longer play in iTunes.
I get a message that this video is not compatible with this version of iTunes. I have to open the video in Quicktime to watch it.
Unacceptable! This hardware and software is too expensive to have these performance issues.
2011 Mac Mini, 8GB RAM, Duo core, iTunes library on NAS on wired network. Mountain Lion 10.8.2. iTunes 10.7 64 bit.

Movie playback issues

My movies are having playback issues again. Default settings are 44.1kHz 16bps 720p HD.
Operating System: Windows 8
Itunes Version 12.1.0
The issue is the sound goes in the beginning of each film. I have a computer which is two years old and yet there seems to be a recurring problem with movie playback.

I think it depends on which version of iTunes you are using. I had the same problem with digital copy movies when I loaded the 64bit version of iTunes 8.1, iTunes64setup.exe, on a Vista machine. Once I deleted that version and loaded the 32bit version of iTunes 8.1, iTunessetup.exe, I was able to view the movie in iTunes AND download it to my iTouch.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

My Apple TV stops and returns to main menu during movie playback and photo slide show via homesharing. I have a second Apple TV in another room that works fine.

Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel.

This content requires HDCP for playback problem! Apple TV2

Owned Apple TV for two weeks. Two weeks ago, everything was fine for films already in my iTunes library.
This week, when selecting play on a movie, I get the message 'This content requires HDCP for playback problem' inconsistently. Some vids work, some don't. Then they do then they don't! I have tried on a Samsung TV and a Sony Bravia? Same for both!
How do I resolve this. I have tried different HDMI ports, turned Apple TV 2 off and on. Tried different cables (Although my HDMI cable is the one I purchased from Apple).
Any suggestions? Is it something Apple need to fix? This is kinda embarrassing when I tell friends how good Apple TV is, get them round to watch a movie and inconsistently get this.
Many Thanks for any help
Dave.

I too sadly have this handshaking issue. I'm in Phoenix, AZ. Day one buyer for ATV2. Worked all of about two days in terms of streaming HD content from either my MAC or netflix. About the third time i tried to stream HD content from Netflix or Blu Ray digital copies from my Mac, I get the HDCP compliance message stating my display is not authorized.
I have tried every concievable combination of unplugging and rebooting of TV (Samsung 2005 DLP), ATV2, and HDMI switcher (Monoprice) and nothing will work. My DirecTV HD-DVR works like a charm. If I rent an HD pay per view from DirecTV, no problem. If I rent an HD movie on iTunes, won't display it due to the HDCP issue. I've NOT ONCE had an issue with my DirecTV HDDVR having an HDCP compliance issue and of course its connected to my TV via HDMI thru my monoprice HDMI four port switch.
I guess the only other thing I could try is exchanging the unit itself. But everything else works as advertised. It feels like this is just a software issue that needs to be patched, and fast.

Question: Apple TV Movie playback freezes very briefly but frequently

Last night I rented a couple of HD movies from iTunes on my 160GB Apple TV and watched them. During playback there were quite a few very brief instants of the picture freezing during movie playback. It's the kind of thing some people may not notice (I don't think my wife noticed), but it got to be kind of annoying to me, to the point where I was anticipating it to happen again instead of enjoying the movie!
One of the movies was about 80% downloaded when I started to watch it, although it said it was "Ready to Play." Also, the hard drive on my Apple TV is about 3/4 full with music.
Anyone have any idea why this would be happening and is there anything I can do to fix the problem?

ffchop wrote:
Thank you for your response. Again, it was relatively minuscule, but just noticeable enough. I will reboot it.
Has this been a noted problem with other users of the old unit?
I've seen very bried video stutters and audio dropouts from time to time.
Another possibility is the encoding but generally it's not that - if you rewind and replay usually it plays ok 2nd time around - if encoding of video was to blame it would always be the same.
I am considering grabbing a new unit in the future. Has Apple noted that the new Apple TV will have "smoother playback" relative to the old unit, or something like that?
Not specifically, it's just a more powerful chip in it than previously - the old AppleTV was probably pushing the limits with the available hardware.
However, from:
http://www.apple.com/uk/appletv/
this might be a hint:
"All streaming. No hassle.
Everything you want to watch — films, TV programmes, photos and more — streams wirelessly to Apple TV. That way you don’t have to worry about managing storage or syncing to your iTunes library. HD film rentals play over the Internet to your widescreen TV, while music, photos and TV programmes stream from your computer. Either way, all you have to do is click and play. Since Apple TV features a powerful A4 processor, it streams everything effortlessly, without frozen screens or stutters. Video looks crisp and clear. And just like watching a DVD, you can fast-forward through opening credits, pause for a popcorn break or replay a hilarious scene until you memorise every line."

Toshiba L4353 39" - USB Movie Playback Problem

Similar Messages

Maybe you are looking for