Total in graphs

Hello every one,
I have a query in WAD and Im doing a graph based on the query, the problem is that the users want the graph to show the values based on percentage, and I did that, bue they also want the result to show at top of the graph, the problem is that they want the result to show as a value not as a percentage, can any body tell me how to do this? thanks

ooops, I just realized that the graph is displaying the values as a percentage, but it only added the % sign, like for instance ine if my values is 2345 and it shows as 2345% instead of giving me the percentage of all the values in the stached graph :S

Similar Messages

OBIEE 11g - How to display Grand Total in graphs

hi ,
I am using obiee 11.1.1.6 version . In a report I have a requirement to display the grand total (present in the table) to be shown in the graph also . Kindly help.
Regards,
Niv

Hi Niv,
One quick question here.How are you creating Grand Total?
I have created using grand total by row summing and inserting that value in the Group By Function.
Attached the screen shot for your reference.
GT - Download - 4shared
Mark if helps
Thanks,

Graph using parameter

Post Author: pkarnes
CA Forum: Charts and Graphs
Long story short- have a list of transaction amounts that inc/dec an account balance. The account's beginning balance is a parameter. Created a running total of transaction amounts, then created a formula that adds to the running total for each record the beginning balance (this formula shows the on-going balance). I want to be able to graph the on-going balance, but the formula field is unavailable in the chart expert. Anyone know of a way around this so I can use the parameter and running total to graph on-going balance? Thanks.

Post Author: V361
CA Forum: Charts and Graphs
I have CR XI, when laying out the chart, click on data, layout, advanced, you should be able to select a formula from there.

Weird and Wonderfull BB-Vision / Experts and Mods ...

I have some questions about slow Broadband, Vision V04 error message and an IPlayer Code 0 error message (at end of this message).
IMO the Vision V04 and IPlayer issues are directly associated with unreliable and inconsistent Broadband.
Background
I have raised this issue a number of times in the past through the BT Complaints procedure, 30-06-2010, 11-08-2010, 04-06-2011, 07-06-2011, and today. I have also phoned the 0800-111-4567 help line a number of times with regard to the same issue.
As an indication the following is a Total Broadband graph of my speed results, from November 2010 through to 25-06-2011.
I have been taking ADSL Stats and BT Speedtester results, which I record to a spreadsheet, since May and three times a day since the beginning of June. I can post some of these results if it will help.
An engineer came on the 9th June, fitted an ADSL v 1.0 plate and disconnected the earth wire. During the visit the engineer checked my line and stated that it was fine and should be capable of BB speeds in excess of 4.0 mbps (actually should be able to get up to 5.0 mbps). I contacted BT on the 14th June to switch me back from fast to interleaved, which was done later that day. The switch to fast was done a few weeks earlier at the suggestion of a person on the help line.
From the 14th June, after the switch to interleaved, BB speed was relatively stable although there was a restart about twenty four hours later not initiated by me. From this time, 15th June through to the 21st June, almost six days without any restarts, noise margin stayed reasonably consistent at between 14.0 dB and 15.0 dB (down). Other stats also stayed reasonably consistent with speeds in the 2.7 mbps range and an IP Profile of 3.0 mbps.
On the evening of the 21st June there was another (automatic-system) restart. Since then all stats have fluctuated drastically. Noise margin has generally increased to the current figure of 28.8 dB (down). Attenuation has occasionally increased to 45.0 and 47.0 dB but then falls back to the consistent level of 43.0 dB. Power output has also occasionally varied and is at the current level of 15.6 dBm (down). I also have high FEC Errors and Error Seconds. CRC and HEC Errors are generally low.
Over the past five to six days restarts have been happening on a daily basis usually between 16.00 and 17.00 hours. Monitoring the line stats during this period shows that the noise margin reduces to below 1.0 dB (probably 0), this happens within minutes until the broadband signal disappears. Approximately five minutes later it will re-establish. This sometimes happens more than once. During this time the Hub broadband light turns orange and flashes until the connection is re-established when it turns a solid blue. Last night and this morning the BT Speedtester failed with the message unable to complete the Assured Rate test.
The hub is connected direct to the main telephone plate.
I have also noted that Openreach have been working in Fawley-Holbury, and around the 23rd June there was a fault in theSouthampton area that affected 0238 numbers (my exchange number). Apparently this fault was resolved.
I have also noted noise on the telephone line using the 17070-2 silent line test.
One final point, a neighbour also has a HomeHub2. Checking my network connections the neighbour’s hub consistently gives a higher wireless output than mine. This is surprising as my hub is only three to four metres away from my pc whereas the neighbours must be a minimum of at least ten to fifteen metres and behind two external brick walls, maybe more.
I purchased the HomeHub2, in October 2008, it is a V 2.0 Type A (firmware 8.1.H.J updated 18-03-2011; it was not supplied free with BT Vision. I have had BT Vision since December 2008, I have the silver STB.
I have just done a complete system reset of the Hub and Vision box, plugged the vision box direct in to Port 1 on the Hub, Port 2 goes to the master Powerline adaptor. The slave Powerlines are plugged in to a Blu-ray player and an old laptop. The ADSL Stats improved but the assured rate test still failed.
Questions
1/. Is my HomeHub2 defunct should I get an alternative?
2/. Is my telephone line the cause of the problem or are both the hub and line defective.
3/. Why is a neighbour’s Homehub giving a stronger wireless signal than mine.
4/. I seem to be able to use ‘on demand’ and the IPlayer with Best Effort and Assured Rate speeds far below the recommended 2.0 mbps (not complaining but this is not reliable).
5/. How can my Assured Rate speed test result be higher than the Best Effort test, when my Assured Rate IP Profile is 600 kbps, example Best Effort 873 kbps, Assured Rate 1230 kbps.
6/. With and AR IP Profile of 600 kbps how can I achieve speeds in excess of 2000 kbps (several occasions), highest recorded 2996 kbps with a BE of 3684 kbps, with a BE IP Profile of 2500 kbps.
7/. Why should the hub output power vary?
8/. Can RFI (radio frequency interference) cause problems? I am close to the Fawley Refinery and the Solent, theSolentwill have ships and ferries with radar and there are possibly microwaves near by and I am about 400-500 metres from a mobile phone mast. I am also 400-500 metres from overhead high voltage power lines, which distribute from the Fawley Power Station, but this is only used as a stand-by so I have ruled out interference from these. This does not appear to affect other ISP’s from the Fawley exchange. (See the Think Broadband map).
Solved!
Go to Solution.

@guilbo
Thanks for the comments. I tried to register a fault and did a test on my phone line through the BT.com (MyBT) site. It said there was no problem with my line. I followed this with a 17070-2 silent line test and as far as I was concerned it was noisy. I will wait a few days to let my curent complaint work through the system and then phone BT and report a noisy line. My current stats are as follows;
ADSL line status
28th June 2011 - 12.26
Connection information
Line state
Connected
Connection time
0 days, 0:51:45
Downstream
1,600 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
28.9 dB / 21.0 dB
Line attenuation (Down/Up)
43.0 dB / 26.0 dB
Output power (Down/Up)
18.4 dBm / 11.9 dBm
Loss of Framing (Local)
33
Loss of Signal (Local)
3
Loss of Power (Local)
Loss of Power (Local) 0
FEC Errors (Down/Up)
74 / 0
CRC Errors (Down/Up)
2 / 2147480000
HEC Errors (Down/Up)
nil / 0
Error Seconds (Local)
117
Best Effort Test
28th June 2011 - 10.48
Results not shown
Download Speed
Acceptable Range
DSL Connection Rate
Down
Up
IP Profile
Assured Rate Test
Test Failed
Try again later
Download Speed
Acceptable Range
Assured Rate IP Profile
As you can see the BT Speedtester site is still not giving me any results. The Think Broadband and Speedtest.net sites are indicating only 300-400 kbps.
My wireless has improved slightly, I downloaded inSSIDer 2.0 software and it shows my HomeHub2 neighbour is on a different channel. This is also true for the other wireless BB in the area.. Probably why my signal strength has improved.

Porsche Design External Hard Drive for Time Machine back-up

This is what I am looking to buy for my back up: http://www.amazon.com/LaCie-Porsche-Design-External-9000296/dp/B008SA69L8/ref=sr _1_10?s=electronics&ie=UTF8&qid=1393398362&sr=1-10&keywords=porsche+design.
But this is not available on online Apple Store. Only "desktop drives" are available. What is the difference between "desktop drive" and "external drive?"
Also, how do these Porsche Design hard drives rank in terms of reliability and longevity?
Do I need to install LaCie software to use this hard drive for back-up? Or is it possible to directly use Time Machine to use this hard drive for back-up?
Lastly, how does password protection work? Does the LaCie software have to be installed to take advantage of this?

mrq0604 wrote:
How about 3.5" Seagate drives? Are they any better in terms of quality?
Currently the promotional price for 3.0 TB Porsche Design "external drive" is $129 (normally $169). Is this a good deal? And the 3 TB "desktop drive" is $153. Why would they sell thr same product under 2 different names and with different prices? What does "external drive" offer for $16 more? As far I know, they look the same...
How about 3.5" Seagate drives?
Absolutely not, no.
All HD can and do crash and fail, its just statistical sampling in total (see graph above)
If you want the most reliable 3.5" HD, get a 2TB Toshiba, which is actually made by Hitachi (confused yet?)
Hitachi sold their 3.5" division to Toshiba (forced to actually), so a Toshiba 3.5" is really a very well built reliable Hitachi 3.5"
On sale, 2TB Toshiba 3.5" (really Hitachi made) only $88
http://www.amazon.com/Toshiba-Canvio-Desktop-External-HDWC120XK3J1/dp/B008DW96NY /ref=sr_1_10?ie=UTF8&qid=1393443687&sr=8-10&keywords=toshiba+2tb
There is actually a non-commercial HD more reliable than this, which is the WD "black" drives, the server grade drives, but theyre not consumer grade
theyre very expensive, and made for server farms.
here:
http://www.amazon.com/Western-Digital-Cache-Desktop-WD2003FZEX/dp/B00FJRS628/ref =sr_1_2?ie=UTF8&qid=1393443945&sr=8-2&keywords=wd+black
As said no such thing as Porsche, its Seagate . Porsche is just the name on the enclosure.
Why sell under 2 diff. names?   Actually they do it under 5 DIFFERENT NAMES , Hitachi does the same, so does WD
As I said, there are only 4 HD makers on earth.    The many names etc is to fill up shelf space with diff. names such as Porsche , LaCie etc etc.
Id avoid most of the 3TB and certainly the 4TB drives for at least maybe another half year or so.
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed
Hard Drive Warning (all makes and models)
Ironically but logical, new hard drives are far more fragile than one that has been working for several months or a couple years. So beware in your thinking that a new hard drive translates into “extremely reliable”!
Hard drives suffer from high rates of what has been termed "infant mortality". Essentially this means new drives have their highest likelihood of failing in the first few months of usage. This is because of very minor manufacturing defects or HD platter balancing, or head and armature geometry being less than perfect; and this is not immediately obvious and can quickly manifest itself once the drive is put to work.
Hard drives that survive the first few months of use without failing are likely to remain healthy for a number of years.
Generally HD are highly prone to death or corruption for a few months, then work fine for a few years, then spike in mortality starting at 3-4 years and certainly should be considered end-of-life at 5-7+ years even if still working well. Drives written to once and stored away have the highest risk of data corruption due to not being read/written to on a regular basis. Rotate older working HD into low-risk use.
The implication of this is that you should not trust a new hard drive completely (really never completely!) until it has been working perfectly for several months.
Given the second law of thermodynamics, any and all current mfg. HD will, under perfect storage conditions tend themselves to depolarization and a point will be reached, even if the HD mechanism is perfect, that the ferromagnetic read/write surface of the platter inside the HD will entropy to the point of no viable return for data extraction. HD life varies, but barring mechanical failure, 3-8 years typically.
Hard drive failure and handling
The air cushion of air between the platter surface and the head is microscopic, as small as 3 nanometers, meaning bumps, jarring while in operation can cause head crash, scraping off magnetic particles causing internal havoc to the write surface and throwing particles thru the hard drive.
Hard drives are fragile in general, regardless, ... in specific while running hard drives are extremely fragile.
PDF: Bare hard drive handling generic instructions
hard drive moving parts
Some of the common reasons for hard drives to fail:
Infant mortality (due to mfg. defect / build tolerances)
Bad parking   (head impact)
Sudden impact   (hard drive jarred during operation, heads can bounce)
Electrical surge   (fries the controller board, possibly also causing heads to write the wrong data)
Bearing / Motor failure   (spindle bearings or motors wear during any and all use, eventually leading to HD failure)
Board failure   (controller board failure on bottom of HD)
Bad Sectors   (magnetic areas of the platter may become faulty)
General hard drive failure

Pipeline Performance Management capability for Managers

I went through Kranti's PPM blog for "Improving Sales Pipeline Performance through Enhanced Visibility" and the 2 demo videos and have a couple of questions.
1. Roll-up: As a Sales Manager how would I know the roll-up of all Opportunities in the Pipeline of all Sales Reps that report up to me?
2. Adjust: How can I then adjust this combined Pipeline roll-up and submit it to my manager with my adjustments without changing the individual Opportunity's expected sales values?

That would certanly be nice and very usefull, but I think that SAP didin't provide this functionality. You can see the total value of opportunities only on graph, but not under table as a separate row total. You also can't make subtotals, so in case that you want to see total values for 2 different organizational units or salesman, it's not possible. To see the total in graph for a certain org.unit, you would have to choose that specific org.unit under button "Choose unit" or create filters.
Maybe someone knows of other solution, but I think this is pretty much all that it is avalilable by SAP standard.
Regards.

Problems with Value Labels in Stacked Bar Chart

Post Author: RGR
CA Forum: Charts and Graphs
When choosing a stacked bar chart to display the contribution of 2 values to the overall total, the graph plots correctly, but the value labels are incorrect. Instead of labeling the values for A & B, the graph is appropriately labeled for A ,but the label for B is the total for A+B. It should be just "B".
Has anyone else experienced this problem or has a solution. I am using CR 2008
TX

Post Author: Joy Hampson
CA Forum: Charts and Graphs
I have this issue a lot with CR XI. As I have never used CR 2008, I am not sure of the commands. But in CR XI, right click on the graph and select Chart Options. On the Data Labels tab, at the bottom there are two options: Cumulative and Absolute. It defaults to Cumulative, so change to Absolute. That always works for me.

Format the total value in the column of the graph table

Hello all,
I have a graph table and I need to format the total value in the column of the table.
I am trying to find my table bean with the code below but it's not working in the processRequest. Is there anything else that should be done?
// Get the graph
OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyGraph");
// Get the table
OATableBean tblBean = (OATableBean)graphBean.findChildRecursive("MyTable");
The tblBean is null in the processRequest. In the processFormRequest the tblBean is not null.
Thanks and Regards,
Andrea

Hi,
The code OAGraphTableBean graphBean = (OAGraphTableBean)webBean.findChildRecursive("MyTable"); does not work because in this case I am getting the table but casting to a graph.
The MyTable bean is a child of MyGraph.
When creating a graph bean we have the option to create a table as a child (select your graphTable region in the Structure pane, and choose New > tabularFormat - to create the table).
The table bean child I can get just in the processFormRequest, but the graph I can get in both processRequest and processFormRequest.
I need to get the table bean in the processRequest to format the total value column.
Do you know if is there anything else that should be done to format the total column?
Thanks and Regards,
Andrea

Graphing a RUNNING TOTAL on a line graph

So I'm having a lot of trouble putting my data on a chart. I have it all laid out here: files.me.com/redsteven1/glwk4v.numbers.zip
Whenever I try to graph it though I run into a whole host of problems. Namely, that I can't get the values to plot on the chart at all.
Not sure what the problem is... I select A2:G103... and I see the different series (for each Activity) show up in the legend, but nothing is plotted on the chart.
I know that much of the table is blank... that's because I'll be adding to it every day.
Ideally, the X-axis should be time/date.... May, June, July, and August can be the major tick marks. And the Y-axis would be number of hours spent on each activity.
To further complicate things, the chart should really be a running total of time spent on each activity... so if I spend an hour on Activity 1 each day for 3 days... then on the third day I should have a plot of 3 hours... not 1.
I know I didn't work things super well here... hopefully you can figure out what I mean by looking at the linked file : \
Thanks in advance.

I guess that line graph isn't the best one, I would use the Scatter one.
You can't chart your datas as they are at this time.
Every datas are date_time or duration values which can't be charted as is.
Here, I converted the dates from column A into strings
Then I added 6 columns in which I converted the durations into decimal hours.
The original columns are hidden.
The formula used to convert is a simple one.
In H2, I inserted :
=STRIPDURATION(B)*24
Fill to the right
Fill Down
to fill the other cells.
Yvan KOENIG (VALLAURIS, France) dimanche 22 mai 2011 21:26:18
Please :
Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Excel graphs in Word document are totally black

I have a large word document that contains quite a few excel graphs. Many of the graphs translated into acrobat fine, but some of them are totally black with the line portion of the graph showing up on a black background. Any ideas what may be causing this?

If you are having problems creating a PDF, there are two steps you should do FIRST
Go to the appropriate vendor web site and apply all updates to the program you are using (several recent messages have concerned problems with MS Word conversion, with the response that different versions of Word have different BUGS that must be fixed by a download from Microsoft - and MS Office products are not the only ones which may, from time to time, need to be updated to work properly)
Go to the Acrobat update page and apply the updates for your version of Acrobat
IN NUMBER ORDER (updates are not cumulative so, using version 8 as an example, you must apply 8.1.0 before the 8.1.1 update)
http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows
Acrobat 7.0 has several updates to apply

How to generate graph of total CSV used space ?

hi ,
I want to generate graph of total Hyper-v CSV used space
we use scom and i can get graph of each volume individually.
I want to create a summation graph to know average growth rate
Ramy Shaker

I don't think this (http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d) will give you a graph of the total, but you should
be able to look at the code and create your own summation. What you are asking for is something that would be custom, so you are likely to have to create it on your own. At least Shabarinath has written PowerShell code to get the information you
want to summarize.
. : | : . : | : . tim

Add 'Totals' as a graph header

Hi,
I am displaying 'sales' by 'zone' on my graph.
Example:
zones sales
a 10
b 10
c 20
d 20
e 20
Is it possible to show Total : 80 as a graph header.
If i am grouping the zones then it appears as a new axis on the graph. I don't want the 'total' to appear as an axis . I want to appear it as a header just below the graph title.
Is it possible??
Any help would be greatly appreciated!!!!
Thanks!!!

Hi,
Hope this is not possible.
Please create a separate column to show the summed up values of the column, remove the title of the graph. Now create a narrative view with the title of the graph and below it use @column_position_number to show the summed up value.
Hope this helped/ answered.
Regards
MuRam

How to create a graph that shows individual totals plus cumulative ones as well?

Hi,
I use Numbers regularly in the most basic way possible but I'd love to create a chart/graph that shows individual totals but can also show cumulative ones.
For example, Tune A was written in 2004 and earnt £5 that year, £7 in 2005, £8 in 2006, £9 in 2007.
Tune B was written in 2006 and earnt £5 in that year, £2 in 2007, £3 in 2008 and £4 in 2009.
Tune C written in 2007 earnt £1 that year, £3 the next year etc.
I want to be able to see how each Tune is earning across the years but also see how much I earnt from all three Tunes in 2007, 2008 etc.
Can any tell me whether it's possible, whether such thing already exists (free or paid for template is fine) or how to in simple terms?
Many thanks.
A.

Setting up one simple data input table and using SUMIFS and COUNTIFS to extract summary data can be easier and more flexible than using long LOOKUP functions with multiple data input tables.   For example, this one Data table can be used to as the source for the other tables, each of which has only one formula which can be copied to other body cells:
In B3 of 'Tune A Earnings by Year', copied down:
      =SUMIFS(Data::$C,Data::$B,$A3,Data::$A,$A$1)
(This table can be cloned for other tunes by copy-pasting it and changing the value in A1 to the relevant tune name.)
In B2 of 'Total Earnings by Year', copied down:
      =SUMIFS(Data::$C,Data::$B,$A2)
In B2 of 'Total Earnings by Tune', copied down:
     =SUMIFS(Data::$C,Data::$A,A2)
In B2 of 'By Tune by Year', copied right to column D and down:
      =SUMIFS(Data::$C,Data::$B,$A2,Data::$A,B$1)
SUMIFS and COUNTIFS work using column-condition pairs. They are not affected by sorting or filtering the data table and update results automatically as new rows are added to the data table.
SG

Illustrator Graphs; Add totals to a column design; Need , (comma) as decimal separator

Hi all
I am editing a German Annual Report.
I live in Australia.
My system runs OS X 10.10.2 and my Adobe Suite CC is English (or Australian, if that does make a difference in some library)
I need to create a bunch of columns and bar graphs.
The label next to a single column or bar is taken automatically from the data spread.
The decimal separator in the data spread is a . (full stop, or dot)
I need it do display a comma on the final graph. This is standard in many European languages.
If I enter a comma in the data spread Illustrator refuses to draw a graph for this value.
How can I do this?
Regards
Romano

Thank you Jacob
I have to play with this and see what happens if I open data with , as a separator at a later stage.
Also I got lots of clients on the go at all times. I can not change my OS settings for this and then unwittingly create a problem on other clients files.
I am looking at solving this for a specific client on a specific project. Also the files may be edited at the clients site (in Switzerland [Swiss German System]) at a later stage.
I just sent them a test file and they tell me the separator is still a . when they open and edit the data.
If it is in deed a OS issue... ...that should change the moment the edit the graph me thinks...
Regards
Romano

Graph is not getting refreshed

Hi Experts,
I have used business graphics to graphically display some data. I have created two buttons. One button shows graph of "present week". The other button displays the data of "next week". When I am clicking on "present week" graphs are getting populated correctly. However, when I am clicking on "next week" the graphs are getting populated incorrectly. As per the business functionality one has to compulsorily press "present week" button first. Only after that one has to click on "next week". On clicking on "next week", Web Dynpro pictorially displays data of both "present week" and "next week". I am wondering what is going wrong here. I tried various methods to get rid of data of "present week" while clicking on "next week". However, I am not getting success. It seems that data of "present week" is not getting deleted due to some reason when I am clicking on "next week". I tried using "invalidate" by using following statement:
wdContext.nodeWorklist().invalidate();
It is not working.
Code of "present week" is as below:
IPrivateTimesheetView.ICategoriesElement categoryElement;
          IPrivateTimesheetView.ICategories_1Element category_1Element;
          String wbs ="h";
          double d =0;
          double d1 =0;
          double sum = 0;
          String sum_hrs ="";
          double sumValue = 0;
          for (int i=0 ; i<wdContext.nodeWorklist().size() ; i++){
          wdContext.nodeWorklist().setLeadSelection(i);
          categoryElement = wdContext.createCategoriesElement();
          double finalSum =0.0;
          wbs = wdContext.currentWorklistElement().getReciever_Wbs_Element();
          sum_hrs = wdContext.currentWorklistElement().getSum_Hours();
          sum_hrs = sum_hrs.replaceAll(",",".");
          if( sum_hrs != null && sum_hrs.trim().length()>0)
          d = Double.parseDouble(sum_hrs) ;
          finalSum=finalSum+d;
          sumValue = sumValue + d;
          categoryElement.setCategoryText(wbs);
          categoryElement.setSeries1Value(d);
          wdContext.nodeCategories().addElement(categoryElement);
          wbs = "";
          category_1Element = wdContext.createCategories_1Element();
          category_1Element.setCategoryText("Total No of hours entered for all WBSs by you");
          category_1Element.setSeries1Value(sumValue);
            wdContext.nodeCategories_1().addElement(category_1Element);
Code of "next week" is as follows:
                  IPrivateTimesheetView.ICategoriesElement categoryElement;
               IPrivateTimesheetView.ICategories_1Element category_1Element;
               String wbs ="h";
               double d =0;
               double d1 =0;
               double sum = 0;
               String sum_hrs ="";
               double sumValue = 0;
               for (int i=0 ; i<wdContext.nodeWorklist().size() ; i++){
               wdContext.nodeWorklist().setLeadSelection(i);
               categoryElement = wdContext.createCategoriesElement();
               double finalSum =0.0;
               wbs = wdContext.currentWorklistElement().getReciever_Wbs_Element();
               sum_hrs = wdContext.currentWorklistElement().getSum_Hours();
               sum_hrs = sum_hrs.replaceAll(",",".");
               if( sum_hrs != null && sum_hrs.trim().length()>0)
               d = Double.parseDouble(sum_hrs) ;
               finalSum=finalSum+d;
               sumValue = sumValue + d;
               categoryElement.setCategoryText("");
               categoryElement.setSeries1Value(0);
               categoryElement.setCategoryText(wbs);
               categoryElement.setSeries1Value(d);
                wdContext.nodeCategories().addElement(categoryElement);
               wbs = "";
               category_1Element = wdContext.createCategories_1Element();
                 category_1Element.setCategoryText("");
                 category_1Element.setSeries1Value(0);
                 category_1Element.setSeries2Value(0);
               category_1Element.setCategoryText("Total No of hours entered for all WBSs by you");
                category_1Element.setSeries1Value(sumValue);
               wdContext.nodeCategories_1().addElement(category_1Element);
Can you please help me?
Regards,
S

Hi Experts,
Further to above question, please note that I have created table to display the data of "present week" and "next week". Using the program, the table is getting populated correctly in both cases - "present week" and "next week". Only graph is still showing details of both - "present week" and "next week" taken together. I tried to sort out the issue using "wdContext.nodeWorklist().clearSelection();" statement as well. However it is still not helping. Can you please help me.
Thanks
S

Total in graphs

Similar Messages

Maybe you are looking for