Total time saved: is 0
If I https to the management gui interface on one of our 274 devices and go to monitoring and select the CIFS tab, the total time saved is reading Zero. This does not seem right because some of the other devices have a large number there??
Hi Dan,
Sorry for the delay.
1. But looking at your issue, is this only related to CIFS? I mean, does it show up all the other statistics?
2. Further,can you look at the CM and find out if it shows up on CM?
3. If CM is also showing "0", any idea when it stopped pushing this to CM / WAE itself?
3. Is this really optimizing CIFS in both directions?
4. Do you see any alarms on this WAE? - show alarms OR sh alarms hist det
I am sure this information help us to point the problem. it seems like we have some reporting / statistics issue with this WAE. Have you done anything to correct this issue (like reloading, etc)?
Thanks.
Similar Messages
-
Adjust for daylight time saving different for just one user
I justed started a new job and I am introduced in a new Windows Terminal Server environment. We use Windows 2003 Server, Exchange 2003, a Sun Fire V210 server and SunRay 270 TC's. The SUN part is totally new for me, so forgive me ;-)
We have one user that has an Outlook (2003) problem. She saw that after the 28th of March, when the summertime here in the Netherlands is active, her appointments are shifted for an hour. I checked as a Windows administrator the Windows TS she is working on and it has the correct TZ(GMT+1, Amsterdam) and the option for Adjust Daylight Time Saving is enabled.
Then I checked with her in Outlook, whether this setting is reflected correctly. In Outlook I went to Tools, options, Calendar Options, Time Zone and the checkbox 'Adjust for Daylight Time Saving' is disabled! That is strange since this should be the setting of the server and as I already wrote, this is correct. Ofcourse therefor she can't enabled it here. I let her login with her id card on a different TC 270 client and the same problem there. Than I started on my laptop a remote desktop connection to the Windows TS and we checked again. The strange thing is, now the option is enabled and all her appointments are correct after the 28th of March.
We have checked with all the other users and nobody else has this problem. We have deleted her Windows profile totally but this didn't solve it.
Since it only happens when using TC's, I reckon the problem is with the Sun TC's or the SunRay Server.
Does anybody has a clue what this could be? The Sun Fire doesn't save user specific information, does it?
Thanks in advance
Kind regards,
OlafOk, now I am a bit confused. I saw the page http://wikis.sun.com/display/SRWC2dot2/Home and looking at that, it seems the SRWC software is Windows software, We have not installed any Windows software from SUN. So, also no SRWC software on Windows. I thought the SRWC was a software component on the SunRay server?
Maybe I did not explain the problem correctly, but the we have several thin clients, SunRay 270's. They are connected to the Sunray Server, Sun Fire v210. This server redirects them to our Windows Terminal Server. We use Exchange Server 2003 on our Windows 2003 Servers.
We have one user with the problem. She puts in her ID card in the TC, she is redirected to our WTS, she logs in in the Window login prompt. She starts Outlook and sees in there with Tools, Options, Calendar Options, Time Zone, that the Adjust Daylight Time Saving is disabled. Although this is on the WTS server enabled, system wide.
When she doesn't use a TC but starts a remote desktop connection from a Windows machine to the WTS, it works fine.
Again I apologise for my lack of knowledge on the SUN side of this.
Olaf -
Hi,
There was initialization done around year back and there are deltas comming in i want to find the total time since start.
Is it possible???
thanx
sachin kHi Sachin
RSA1 -> Infosource -> Infopackage -> Scheduler(tab in menu) -> Select "Init options in Spource system"
There you can get the date and time it was done.
Or other option is
Infoprovider -> Manage -> check the time stamp for first request and latest time stamp. That will give you the total time.
I hope this is what you are looking for.
Regards,
Rohihni
Dont forget to assign points if it helps...
Message was edited by: Rohini Garg -
How do get particular date of total time
this is our java code
private static PreparedStatement preparedStatement;
private static ResultSet rs;
public static void main(String[] args) throws NamingException, SQLException
int objectId;
int clientId;
DateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
// String gpstime = null;
PreparedStatement preparedStatement = null;
Connection conn=null;
long mill;
long diffSeconds=0;
long diffMinutes=0;
try
Class.forName("com.mysql.jdbc.Driver");
Connection conn1=DriverManager.getConnection("jdbc:mysql://108.108.8.4:3306/navl?","root", "ajmani@%");
preparedStatement = conn1.prepareStatement("select gpstime from xydata a inner join fm4features f on a.ID=f.ID where a.objectId= '18' AND a.clientId = '1' AND a.gpstime > '2010-05-11 00:00:00' AND a.gpstime < '2010-05-13 23:59:59' AND f.DataId='1' AND f.value = '1'");
rs = preparedStatement.executeQuery();
int a = 0;
int b=0;
int b1=0;
int b2=0;
int x=0;
float secs = 0;
Set<String> dates = new HashSet<String>();
ArrayList<Integer> l=new ArrayList<Integer>();
Timestamp t1 = null;
Timestamp t2 = null;
int count = 0;
while ( rs.next() )
String gpstime = rs.getString("GpsTime");
if (dates.add(gpstime) )
//System.out.println(rs.getTimestamp(1));
t2 = rs.getTimestamp(1);
count++;
if (t1 == null )
int nano = t2.getSeconds();
System.out.println(nano);
System.out.println(nano);
System.out.println(t2);
System.out.println(count);
else
mill= (t1.getTime() - t2.getTime())/-1;
//System.out.println(mill);
diffSeconds = mill / 1000;
diffMinutes = mill / (60 * 1000);
long diffHours = mill / (60 * 60 * 1000);
long diffDays = mill / (24 * 60 * 60 * 1000);
//System.out.println("\nThe Date Different");
//System.out.println("Time in milliseconds: " + mill+ " milliseconds.");
System.out.println("GPSTime " +gpstime+ " Time in seconds: " + diffSeconds+ " seconds.");
//System.out.println("Time in minutes: " + diffMinutes+ " minutes.");
//System.out.println("Time in hours: " + diffHours+ " hours.");
//System.out.println("Time in days: " + diffDays+ " days.");
t1 = t2;
//System.out.println("Time in minutes: " + diffSeconds+ " seconds.");
if(diffSeconds < 80)
b=(int) diffSeconds;
System.out.println(b);
l.add(b);
else if(diffSeconds > 80)
b2=(int)diffSeconds%60;
System.out.println(b2);
l.add(b2);
a++;
for (int i=0; i<l.size();)
secs+=l.get(i);
i++;
System.out.println(secs);
int hours = (int) (secs / 3600),
remainder = (int) (secs % 3600),
minutes = remainder / 60,
seconds = remainder % 60;
String disHour = (hours < 10 ? "0" : "") + hours,
disMinu = (minutes < 10 ? "0" : "") + minutes ,
disSec = (seconds < 10 ? "0" : "") + seconds ;
if (count < 2)
int se = Integer.parseInt(disSec);
String min = (t2.getSeconds() < 10 ? "0" : "") + t2.getSeconds();
System.out.println("00" + ":" + "00" + ":" + min + " hh:mm:ss");
System.out.println(disHour +":"+ disMinu+":"+disSec+ " hh:mm:ss");
}catch(Throwable th)
Logger.getLogger(testing1.class.getName()).log(Level.SEVERE, null, th);
}finally
if(preparedStatement!=null)
preparedStatement.close();
if(conn!=null)
conn.close();
}this is output
GPSTime 2010-05-13 20:16:13.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:17:10.0 Time in seconds: 57 seconds.
57
GPSTime 2010-05-13 20:18:10.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:19:10.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:20:10.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:21:11.0 Time in seconds: 61 seconds.
61
GPSTime 2010-05-13 20:22:11.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:23:11.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:24:11.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:25:11.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:26:11.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:27:11.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:28:12.0 Time in seconds: 61 seconds.
61
GPSTime 2010-05-13 20:29:12.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:30:12.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:31:12.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:32:12.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:37:46.0 Time in seconds: 334 seconds.
34
GPSTime 2010-05-13 20:38:46.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 20:47:22.0 Time in seconds: 516 seconds.
36
GPSTime 2010-05-13 21:12:54.0 Time in seconds: 1532 seconds.
32
GPSTime 2010-05-13 21:13:54.0 Time in seconds: 60 seconds.
60
GPSTime 2010-05-13 21:14:55.0 Time in seconds: 61 seconds.
61
GPSTime 2010-05-13 21:37:08.0 Time in seconds: 1333 seconds.
13
GPSTime 2010-05-13 21:38:09.0 Time in seconds: 61 seconds.
61
31169.0
08:39:29 hh:mm:ssi am getting the total time for all date
i need only the particular date of total time
2010-05-11-->total time
2010-05-12->Total time
2010-05-13->total time
how do i change the given code to get the above output
please help me anybody having ideaBakthavachalam wrote:
i am getting the total time for all date
i need only the particular date of total timeIn which case your while(rs.next()) loop needs to process 1 day at a time and print its results when the date changes (assuming your Timestamps come in in date sequence; if not, you'll have to sort them first).
I suspect you'll also have to decide what you want to do with
GPSTime 2010-05-13 23:59:59.0
followed by
GPSTime 2010-05-14 00:00:01.0
Do you still need to calculate the difference? And if so, which "date" does it go in, or is it split?
Your logic seems incredibly convoluted for such a simple task. What exactly are you trying to do?
Winston
BTW: TimeStamp.getSeconds() is deprecated, which means you use it at your peril. -
How to display the time length of video (current time/ total time) ?
Hi,everyone. I would like to ask how to display the time length of the video which show only in system example: it show the current time and total time? using AS 3.0.
It there any information or solution to solve it? .
I appreciate it any of you able to answer it. ^^
Thank you.Hi,
Actually I have this requirement for MAC OS 10.5. With the code you provided, I got the output as "6289375". When I changed the URL to point to my file (file:///Users/VPKVL/Desktop/MyRecord/tempAudio.wav), I am getting the below mentioned Exception:
Exception in thread "main" javax.sound.sampled.LineUnavailableException: Failed to allocate clip data: Requested buffer too large.
at com.sun.media.sound.MixerClip.implOpen(MixerClip.java:561)
at com.sun.media.sound.MixerClip.open(MixerClip.java:165)
at com.sun.media.sound.MixerClip.open(MixerClip.java:256)
at TestWavLength.main(TestWavLength.java:13)The "tempAudio.wav" file is created by using java sound API. I am using the SSB USB Headphone Set to record the audio with the following settings for AudioFormat object:
AudioFormat audioFormat = new AudioFormat(
AudioFormat.Encoding.PCM_SIGNED, // the audio encoding
// technique
48000.0F,// sampleRate the number of samples per second
16, // sampleSizeInBits the number of bits in each sample
2, // channels the number of channels (1 for mono, 2 for
// stereo, and so on)
4, // frameSize the number of bytes in each frame
48000.0F,// frameRate the number of frames per second
false); // bigEndian indicates whether the data for a single
// sample is stored in big-endian byte order
// (false means little-endian)Can you please suggest where I am going wrong ? -
In the new iTunes the play list total time displays in 1.5 hours format, how do I get it to clearly show 1hr 31min 12sec like before, I want the exact time so I can properly fit all the songs when I want to burn this playlist to a disc. You can no longer just click on it to change the display format. Nor can you right click, control click, or change it in options. If anyone knows I would very much appreciate your imput. Thank You.
Actually, that's the problem ... in iTunes *11* it has stopped working. I have the status bar displayed, and it is stuck on the 1.x hours format.
That is very, very strange !!
I can't get that to happen on mine. It worked in 11.0 and I updated today to 11.0.1 and it's OK.
I've tried making a new playlist, I've tried changing an old playlist, smart playlist ...... all OK ???? -
Total time balances in HRFORMS
I designed a form to report total time balances overview
using TIM_SALDO in HRFORMS.
when evaluate <b>NOT</b> a complete time evaluation periods by specifying the data selection period on the selection screen.it gives total time balances of complete time evaluation periods!?
Time evaluation periods is 10.01 - 10.31 ,
I evaluate 10.01 to 10.15,
but the result of total time balances is for 10.01-10.31.
BUT form designed by PE50,using SALDO too.
when evaluate 10.01 to 10.15,it gives right result.
I know table Table SALDO stores all cumulated balances. The balances are added from table TES to SALDO in month-end processing.
BUT WHY PE50 form can evaluate partly period ,while HRFORMS can not.
How to design using HRFORMS to evaluate partly period or corss periods?
Must I write code by using table ZES to cumulate manully?Here is your sum in minutes
WITH your_data AS
(SELECT '4.30' emp_ot FROM DUAL
UNION ALL SELECT '5.50' emp_ot FROM DUAL)
SELECT SUM(minutes) FROM (
SELECT REGEXP_REPLACE (emp_ot, '(\d{1,2})\.(\d{2})', '\1') * 60
+ REGEXP_REPLACE (emp_ot, '(\d{1,2})\.(\d{2})', '\2') minutes
FROM your_data)
620
Message was edited by:
Bolev -
Calculating total time from a query
Hi everyone,
I have a simple database and one of the fields in this
database is time spent on stuff, for example a bike ride lasted
00:45:00, 01:33:03, 01:23:03 ETC
what I am trying to do is calculate total time. so do a sum
of that column.
Simple enough.
the column is a VarChar, I tried Time as well and well that
did not go well.
if I use mysql command line I get this:
mysql> SELECT SUM(mv_time) FROM data WHERE user_id = 2;
+--------------+
| SUM(mv_time) |
+--------------+
| 8 |
+--------------+
1 row in set (0.00 sec)
No idea how it came up with that one as 8 is incorrect
so I got a bit fancier:
mysql> SELECT SEC_TO_TIME(SUM(TIME_TO_SEC(mv_time))) AS
mv_time FROM data WHERE user_id = 2;
+----------+
| mv_time |
+----------+
| 26:14:58 |
+----------+
1 row in set (0.00 sec)
Bingo that is correct.
but if I use that same query within cfquery I get a nice java
error telling that you can't have 26 hours in a single day.
Any ideas how I can accomplish this should be simple task?
Thank you.
LucHi Cf_dev2,
How would I go about making easy for my users to submit the
seconds into the database?
for example I would want them (them being me really :) ) to
enter 01:35:00 (for one hour and 35 minutes) and then have CF or
SQL convert that to seconds (instead of having myself figure that
out manually I am no good at math)
Jdeline, I don't understand what you mean by not storing it
as comma delimited, as far as I know its not comma delimited, its
stored in a table called data along with a primary key id, userid,
date, etc
Thanks
Luc -
Capturing total time for a report..
Hi all..
I have a query. Is there a way to capture total time spent to show a report on browser
If I understand the way it works in OBIEE
Browser -Presentation Services -- HTTP Request or Response (This we can see by increasing sawlog config file to see more details in sawlog0.)
Presentation services - BI Server (By Usage Tracking S_NQ_* tables, it gives response time, elapsed time and such statstics)
BI Server - DB ( The query running time also captured in usage tracking table)
My understanding is on whole when Presentation services pass the request to BI Server..and when it BI server returns the data to Presentation services..
There shoud some COMMON PARAMETER to match the request sent and received ..Mapping the requests...
Is there a way to get that parameter/variable/sytem variable..so that I can accomplish objective of tracking total time spend for a request..
I could increase saw log and see there is no common parameter that I could match from Sawlog to NQQuery Log, but no luck
Can anybody help here to find someway? any pointers?
Thanks in advance..There is no parameter that captures the browser rendering time of the report. In the manage sessions if you check the report run time stats you should be able to find the elapsed time, db connect time and compilation time
To find a more accurate time to render the report and the time when it has become active you can check that information Under Manage sessions in the RPD. That will give the start time and report active time which is the time at which the report is active.
If you closely monitor this time in the sessions will be a little higher than the time present in the view logs elapsed time which includes the browser rendering time as well because it gives the report active time on it.
Hope it will be helpful
thanks
prash -
I'm in need of a variable that I can use to display total time spent in a course.
I'm attempting to create a custom certificate of completion that a learner can print at the end of a course.
I'd like to have the total time spent in the course displayed on it but am not sure about the variable to use.Thanks for the quick reply!
I was hoping for a quick solution to have the elapsed time appear only on a printable certificate of completion.
Unfortunately, this goes beyond my limited knowledge and experience in using variables. (Admittedly, I'm not a frequent Captivate user)
Thanks again! -
How do you display total time for playlist in Itunes 11
how do you display total time for playlist in Itunes 11
"I can see the total time in my playlist on the computer but not on my device??"
I have just posted a question asking the same!
Did you have any joy? -
How come Mac OS X's Software Update doesn't show a total time ETA and size?
Hello.
I noticed when downloading big updates from Mac OS X 10.5's Software Update, it doesn't show the TOTAL time left and size. It only shows the individual updates (e.g., iTunes). Is there a way to show the totals especially when downloading takes forever?
Thank you in advance.Kappy wrote:
Well not in Software Update, but if you download standalone updates directly from Apple's download site - support.apple.com/downloads/ - using Safari then you will get that information reported in the browser's download manager. However, Software Update does report the size of each listed update.
Yeah, I wanted to know the total of all updates since some updates are so huge. Like Java update 5 is like over 160 MB! Add iTunes and others! Yikes. -
Time saved as "00:00:00" for DATETIME item using OADateValidater
Hi All,
In OAF Page for MessageTextInput item DataType Property set as “DATETIME”. Then it is showing as “DD-Mon-YYY HH:mm:ss” Here requirement is, does not show seconds in that DATETIME item. Written below code
String userDateFormat = pageContext.getOANLSServices().getUserJavaDateFormat();
userDateFormat = userDateFormat + " HH:mm"; // Add Time component to format
OADateValidater formatter = new OADateValidater(userDateFormat, userDateFormat );
OAMessageDateFieldBean laborStartTimeInput = (OAMessageDateFieldBean) webBean.findChildRecursive("LStartTime");
laborStartTimeInput.setAttributeValue(ON_SUBMIT_VALIDATER_ATTR, formatter);
Now, on UI it is showing as "15-Feb-2010 07:30" but once I click on Save button data saved to DB as "15-Feb-2010 00:00:00". What is the wrong in above code.
Please suggest.
Regards,
SrikanthUsing OADateValidater to show Start and End time without seconds like “YYYY-Mon-DD HH:mm” in UI and while submitting NOT getting any JavaScript validation error message. But while saving into Data base time is saving as 00:00:00.
Below code is using to show formatted DateTime on UI:-
++++++++++++++++++++++++++++++++
String userDateFormat = pageContext.getOANLSServices().getUserJavaDateFormat();
userDateFormat = userDateFormat + " HH:mm ";
OADateValidater formatter = new OADateValidater(userDateFormat, userDateFormat );
OAMessageDateFieldBean laborStartTimeInput = (OAMessageDateFieldBean) webBean.findChildRecursive("LStartTime");
if( laborStartTimeInput != null )
laborStartTimeInput.setAttributeValue(ON_SUBMIT_VALIDATER_ATTR, formatter);
++++++++++++++++++++++++++++++++
Here thing is that from convertParameterToViewAttribute() method of OAWebBeanDataAttributeHelper class, calling "stringToDateTime()" method of OANLSServices class. In “stringToDateTime()” method converting given text into format like “new OADateValidater(getUserJavaDateFormat()+" HH:mm:ss", getUserJavaDateFormat());”
So, if I pass parameter text like "2010-Aug-10 10:10" it is parsing as "2010-Aug-10 00:00:00" and returning. Which is NOT correct. This is the reason, for given date and time saved in Data Base as “2010-Aug-10 00:00:00”.
How to handle this to get it save time into Database ?
Thanks. -
Hi All,
What exactly does the total_time coloumn in dba_jobs specify ?
My requirement is to find out how long a job has taken to run.Currently the column value is 2077291 which I seriously doubt. Is this the sum of the time taken by the job ? If so how do I find the time for a particular instance ?The total_time column show the total time taken since the job creation and first run.
To have the last execution time, you need to keep an historic table.
Nicolas. -
Total time of just the checked songs
Is there any way to see the total time of just those songs I've checked in a playlist?
In the laylist click on the header for the ticked column. It will group the checked together.
Select all the checked Songs and if the staus bar is showing you will see the time for those songs st the bottom in the grey bar.
If you do not have the grey bar View > Show Status Bar
Maybe you are looking for
-
How to stop voice over utility from running
Accidentally activated voice over utility and now I can get it to stop running, despite uninstalling it.
-
How to find the Standard Program associated with a Standard IDOC
Hi, I am going work on enhancing the standard IDOC. Any body can suggest how to find a standard pogram associated with a Standard IDOC. And can any body send some exaple code for extending a standard IDOC and to implement the logic in the stand
-
How to use double click trigger in ListBoxItem template?
Hi all, I want to double click listBoxItem in listbox, and set this item as editable status. It says make textbox as visible, please see the below code. When press Enter key or lost focus, then make textbox as invisible and textblock as visible. It's
-
Large attachment in mail stalls the application. Please help!
I accidentally tried to send a 10mb email. I realized the issue immediately and tried to delete the email from Outbox, which didn't show up till later. And when it did I deleted the large email in the Outbox. Or so I thought. Next, my Internet got kn
-
HT2305 how to open my iphone???
i forget my iphone passcode,now my iphone desable...How can i solve this problem????