TPVS shipment cannot be created

hi,
i have two doubts in the TP/VS scenario of SCM 5.0
1. when creating multi stage planning for the shipment, the system gives a error complaining "that the order cannot be delivered"
2. the vehicle combination (MTr) we created where is it used in the system,
Thanking you in anticipation.
regards,
Sandeep

Hi Sandeep,
There are various reasons for message 'Order can not be delivered' Following are the possibilities
1) No lane maintained between source & destination location or the lane is not valid
2) The order weight or volume exceeds the vehicle capacity (split required)
3) Incompatibility is maintained in the system
4) Order can not be scheduled in the planning horizon (if the duration is more than the planning horizon)
5) No vehicle resources maintained in the optimizer profile or if the resource is not extended to Live Cache
Multi-modal hierarchy is required only if you are planning a multi-modal shipment & not multi-stage shipment.
If you have created MTr combination, then it is used in typical scenario os trucks & trailer. You will have to maintain active & passive vehicles in the system & then you can use them using MTr combination.
Hope this satisfies your queries. In case if you have further doubts, you refer back the question.
Thanks & Regards
Sandeep Patil

Similar Messages

Relationship cannot be created between identical business partners

Hello,
I am implementing CRM 5.0 and trying to create business partner relationships to the identical business partner. For example, I am trying to makbe BP#1 have te relationship 'Has a Contact of' to BP#1. However, I am getting the error message:
'Relationship cannot be created between identical business partners'.
(Message no. R1776)
Has anyone ever encountered this error? Is there any way to create a relationship in SAP-CRM to the same business partner?
Thanks much for your help,
Dan

Hi Daniel
In short: No, it is not possible to have a relationship "between" a BP and itself.
In long: In R/3 there are partner roles like Sold to, ship to and others. When CRM was designed the people at SAP did want to simplify a bit and implemented the following logic for partner determination: If there is no relationship of a searched type, the BP itself is taken. As a result a relationship pointing to its source is not allowed as it would duplicate the information already existing.
Hope this helps,
Kai

G/L account 59500140 cannot be created as a cost element

Hi Viewers,
When I try to do the KO88 Process order settlement i am getting the below error:
G/L account 59500140 cannot be created as a cost element
Message no. KQ119
Diagnosis
When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
System Response
The entry invalid.
Procedure
You have the following options:
Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
I would like to know the GL Account 59500140 is a P&L Account. Is it correct?.
Please help me to overcome from this issue.
Thanks & Regards,
Aswin

Execute transaction code FSP0 and check whether the account is a P&L or a Balance Sheet. Nevertheless, you can only enter accounts that are not created as cost elements in customizing transaction OKG8. If you enter an account that is also a cost element, then you need to configure default CO account assignment using OKB9 or a substitution using OKC9. Please refer to the following SAP Notes.
https://service.sap.com/sap/support/notes/581296

Data source cannot be created : MAPVIEWER-00011: Error creating a map data

Hi everyone,
i am getting an error meaasge while creating datasource
" Data source cannot be created : MAPVIEWER-00011: Error creating a map data source."
pls help

You should assign only one value to jdbc_sid. Try with this
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="orcl"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="false"
/>
Make sure that oracle sid is 'ORCL'
Sujnan

Delivery cannot be created (only 0 qty of material available )

Hello All,
I have created a sales order for material A on plant B for one qty. The delivery date is 29.12.10 but the system has confirmed the schedule line with a delivery date of 3.1.11. The material availibilty date is 28.12.10.
But when I create the delivery, the system gives message, "Delivery cannot be created (only 0 qty of material available )".
I have checked MMBE and CO09 , there is a stock of qty 2 for material A for plant B. Also there is no other sales order consuming the stock in CO09 for material A in plant B.
The schedule line catergory is CN(not relevant for MRP) in sales order and that is why I cannot see sales order requirement in Md04/Co09. But in any case since the stock is available, the system confirmed the schedule line for 3.1.11 in sales order as said above.
While creating delivery, we are giving a delivery date of 28.12.10 (equal to material availibity date ). I have not checked the availibilty check group but even if checking group= no check, still I think ,the system will confirm schedule line since stock is available and it has confirmed stock in sales order as said above
But still we cannot create delivery and receives the error, "Delivery cannot be created (only 0 qty of material available )"
Pls help.
regds
Pamela

Hi Pamela,
It seems that material A is not available in plant B on 28.12.2010 even if the stock is shown as 2 qty in MMBE
Please go to MMBE place the cursor on storage location and the check the Warehouse stock for that material.
It may be that material qty 2 which is currently shown in stock overview is lying in interim storage type 916 against some goods movement (601) issued against some other sales order.
Also check whether negative stock are allowed in that storage type. In your case , I think they are not allowed.
I hope this helps
Br,
Tushar

When trying to restore an iCloud backup, I receive the error message "Appe-ID cannot be created. invalid device while updating mme delegate account".

After a complete crash of my iPad 3 (WIFI only) because of updating to iOS 7.03, I try to restore my config from iCloud.
I managed to get into the settings assistant and enter my Apple-ID (which is valid as checked via iTunes).
But then I see the error message "Apple ID cannot be created - invalid device while upgrading mme delegate account".
I have no clue what the mme delegate account is but need my data back.
Any suggestions?

All you need to do is restore the iphone in itunes as new
and then set up as new
after this is done
then you can restore from itunes back up with out any error!!
-Johnny

Error in file receiver adapter (Directory does not exist / cannot be create

I have a NFS reiceiver file NFS adapter with target directory:
10.128.68.38\arbo2000\UploadPinfos\arbodev
if I run this line in windows, windows access to this folder.
Full Error log:
Receiver Adapter v2123 for Party '', Service 'BS_0000_ARBO_DEV':
Configured at 2006-04-06 18:08:26 CEST
History:
- 2006-04-06 18:08:35 CEST: Error: Message processing failed: Exception: Message processing failed - configuration error in file receiver adapter (Directory does not exist / cannot be created)
Can somebody help me please??

Hi Alvaro,
If your XI server is running on Unix platform then you'll get the access only after mounting 10.128.68.38 this system as a drive. This is equivalent to the windows network mapping.
Next thing is that once that is done then you can access the path /arbo2000/UploadPinfos/arbodev by mentioning it in your directory path.
To check whether the above mentioned is the problem then pls do try by doing it with FTP protocol. If it works then for acting as a local directory for NFS you need to mount the drive.
Cheers
JK

PROBLEM IN SETTLEMENT CO88 - G/L 7000203 cannot be created as a co element

Dear friends,
I am facing with an error. Kindly suggest the way how to come up with the issue.
My Client due to some reason passed an JV in the month of december in PRD.
Now after this all the settlement for the next periods are in error. The following is the error while executing CO88.
G/L account 7000203 cannot be created as a cost element
Message no. KQ119
Diagnosis
When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
System Response
The entry invalid.
Procedure
You have the following options:
Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
I even tried to create make default the COST CENTER in OKB9 for that cost element as stated in the message itself but still the problem exist. I got another suggestion. Firstly i will transfer the values in new GL a/c, and make the necessary config changes in OKG8 with the new GL a/c.
can somebody guide me whether i am on the right way or is there any work around possible.
regards,
sandeep jain

Hi Sandeep,
In Transaction OKG8 the GL account for P&L(7000203) should not be a cost element. I dont know how it was allowing you all this while.
Try assigning another P&L account without a cost element.
Keep us posted on the progress please.
Thanks
Naveen

Error while displaying file " C:Temp Filename.Ext cannot be created"

Dear Friends
Some users face problem while display the file. They get message " C:\Temp\ Filename.Ext cannot be created ". I checked Details. I got explaination as follows.
Caution! You are not authorized to work with temporary storage
Message no. ED204
Diagnosis
You do not have authorization to read or write from or to the temporary storage.
The system uses the temporary storage when you display or change programs using the ABAP Editor.
The system checks to see whether there is a temporary version of the program.
If there is, a dialog box appears in which you must choose whether to use the temporary version or the database version.
The system fills the temporary storage when the editor crashes or you save a temporary version of the program.
System Response
You probably do not have the authorization object S_DATASET.
Procedure
Ask your system administrator to assign you the relevant authorization.*
Actually this problem never occurs frequently. User access the files very frequently creating around 200 Mb to 400 Mb in C:\Temp Folder per day per user. I observerd as per message that User is not have Access right to C drive. Once I get access from IT for that user he is able to display file. But before giving right he is able to display file. But suddenly he is not able to display. I am not getting exact reason why this problem occurs. Some users temp folder size is upto 700 Mb with no acces right to C Drive still he is able to see the image.
In DC20 I have kept C:\Temp as path for temp folder.
I have checked the links also
Request you to provide me
What is exact reason of the error?
Is the solution to problem is giving access rights to the user?
Do I have to give authorization object S_DATASET to a user?
With Regards
Mangesh Pande

Dear Amaresh
Thanks for your reply and solution.
So you mean to say thats this Authorization object has to be provided to user?
But my question is how the user was able to see the file even when this Authorization Object was not assigned.
He was able to display all file. But for particular DIR he is not able to display.
I have checked this thread
http://wiki.sdn.sap.com/wiki/display/PLM/Error26172withSAPGUI710+patch13.
User has SAP GUI 7.10
File Version 7100.1.0.1027
Build 0
Patch Level 0
Request your help
With Warm Regards
Mangesh Pande

DNS server cannot be created because the authoritative parent zone

I am working in 2008r2sp1. I tried adding DNS Server and DHCP Roles first. Then under DNS Forward Lookup Zones I added "mysite.com" as a New Zone.
Also I searched my computer for a "NTDS" folder and the only on I found was "C:\Windows\inf\NTDS".
A delegation for this DNS server cannot be created because the authoritative parent zone cannot be found or it does not run Windows DNS server. If you are integrating with an existing DNS infrastructure, you should manually create a delegation to this DNS server in the parent zone to ensure reliable name resolution from outside the domain "artisdextri.com". Otherwise, no action is required.
The folder C:\Windows\inf\NTDS> is not valid. Specify a valid path, including drive letter. For example: C:\NTDS.
dcpromo /unattend:"C:\Users\Administrator\Documents\ForestAdd.txt"
ForestAdd.txt
[DCINSTALL]
InstallDNS="yes"
NewDomain="forest"
NewDomainDNSName="mysite.com"
DomainNetBiosName="MYSITE"
ReplicaOrNewDomain="domain"
ForestLevel="4"
DomainLevel="4"
DatabasePath="C:\Windows\inf\NTDS>"
LogPath="C:\Windows\inf\NTDS"
SYSVOLPath="c:\Windows\SYSVOL"
SafeModeAdminPassword="pass1"

Hello,
If this is the first forest root DC, just ignore the information.
Check the blog:
A delegation for this DNS server cannot be created because the authoritative parent zone cannot be found or it does not run Windows DNS server.
http://blogs.technet.com/b/activedirectoryua/archive/2011/07/07/a-delegation-for-this-dns-server-cannot-be-created-because-the-authoritative-parent-zone-cannot-be-found-or-it-does-not-run-windows-dns-server.aspx
Hope this helps.

Field groups cannot be created in the OO context.?

Hi All,
The current ABAP command is obsolete while using Field Group in ECC6.0.
I am getting this error "Field groups cannot be created in the OO context." How to replace Field groups with some other statement.
Thank you,
Swapna.M

Hi Madhavi,
There is no other solution than rewriting the program, e.q. by creating internal tables for the fields now defined with FIELD-GROUPS in HEADER and ITEMS and looping over these tables.
Regards,
John.

The target file cannot be created

I'm trying to output an Adobe Bridge Lightroom Flash gallery.
I keep getting the following error message ad nauseum.
The target file cannot be created.
There are two possible reasons:
1. Disk space is innsufficient.
2. The target file path is too long.
I've never had this happen before.
I've worked on this file for two weeks, and NEED IT OUTPUTED. It's for a major newspaper regarding HDR photos of Japan's 3.11.11 disaster.
I cleared out the cache. So it can't be anything like that.
It's the latest version of Bridge.
I'm on a new iMac with 2g storage, and 16g memory. Mac Lion. Blah, blah, blah.
Is there a lame built in limitation on how many photos can be used? I'm using 300 photos. I've had no issues outputting 200 before.
Setting for view sizes are 800, 800, 75, 100.
Look, if you DON'T know specifically, don't chime in. I've tried some poor advice which has resulted in having to reorder 300 files, which wasnt fun.
This is a seriously and timely issue, as the deadline approaches, and I need to get this pathetic problem resolved.
PS, Adobe Bridge SUCKS!

I've had the exact same issue here as well. Phone support is does not work with this product and I've been in Chat "Hold" for 3 hours now. I've replaced the output module, checked and verified all permissions, cleared all preferences, with no avail.
I have not had any issue with uploading galleries for the past year, and now, all of a sudden, issues.
iMac 27", Yosemite, 16GB Mem, 800 GB space, no permissions issues as I've also tried to just save the gallery to my desktop and upload via ftp client, but Bridge says location does not exist, which, ha, it does, because its on the hard drive....

DMS Documents cannot be created

Hello DMS Gurus
I am working on DMS module.Previously on my P.C. , files which are attached in the DMS (Created From CV01N) can be opened easily ( PDF files,Excel, Word files).
But some time ago my P.C. was formatted & now I have installed WINDOWS 7 operating system.After this installation I am unable to open the documents which are attached in DMS.Every time it is giving the error that File C:\ DFIG.pdf cannot be created.   or   "C:\material.xls file cannot be created" when file is excel sheet.
I have already taken Read & Write access of C drive & also installed Document Imaging software. But still I am facing the same issue.
What could be the reason? Is there any other software installation required?
Your reply is awaited & appreciated.
Thanks
Pravink.
Edited by: PFulwade on Aug 19, 2011 11:38 AM

Hello Pradeep
Front End Computers Setting are as follows:
Data Carrier Type
PC     Desktop with Windows     C:\
WL     WfW system / local applications     c:\temp\
Front End Computers Setting :
#        PC     #                          BASIS
Christoph        PC     Christoph                          GOINGLIVE
DNIRANJN25        PC     DNIRANJN2515PG5     PLMUSER2
Default        PC     DEFAULT                          Default for local PC
JANAND2143     WL                          JANAND2143PG3     YSUNIL
YSUNIL2247     WL     YSUNIL2247PG3     YSUNIL                               YSUNIL
Waiting for your reply.
Thanks
Pravink

Unable to Archive-list of contents cannot be created

Hello all,
I have a problem that I just noticed. I am attempting to create a .zip archive of a folder of pictures. I right-click the folder in the Finder and select "Create Archive of folder". This gives me a message with the header Copy that states "The archive's list of contents cannot be created." and an OK button.
At first I thought that maybe the folder was too large. I tried the same steps on an individual text file and got the same error message. I tried copying the file to a different drive and still no joy. I created a new admin and normal user accounts and was unable to create any archives and received the same error message as above.
Does anyone have any clue as to the steps I should follow to correct this issue?

Charles, your post certainly pointed in a good direction. After posting my question, I went back and reviewed everything that I had changed or installed over the last few days. It turns out that the beta version of Little Snitch causes permission errors. Similar to the posts on MacOSXHints, my /tmp folder suddenly became visible and showed as being owned by the staff group that I was no longer a part of. Uninstalling the Little Snitch program and repairing permissions has re-enabled archiving within the Finder. I've also posted a bug report to the developers of Little Snitch to see if they could look into the issue.
Thanks again for the advice.

Alarm not working. cannot set/create new

I have an iphone 5c running 8.0.2
I was having issues with sending text messages so I looked up similar problems and ended up having to reset network settings. this resolved the issue with the text messages but now I cannot set/create new alarms and all of my previous alarms were deleted. seems odd that the two are somehow connected but that is all I can think of that I have done since this morning (where it worked just fine).
this is very frustrating, any help is appreciated.

I am having the same problem with my Iphone 4s running 8.0.2
I noticed yesterday that all of my set alarms were deleted. When I go to add a new alarm, nothing appears after I press 'save'. The small alarm icon appears in the top right for a moment, but disappears after a split second.
There is no error message.
I've used the same alarms for years without any problems.

TPVS shipment cannot be created

Similar Messages

Maybe you are looking for