Trace level mapping BPM

Where can I change the trace level of mappings in BPMs? What shows the tracel level 1?

Hi,
The error could be because of the XSD attributes.
In the Source message CustomerDetails, check the XSD attributes of the DataType CustNumber in the 'Detail' column in the IR. For example, it may have a pattern or whiteSpace or some other attribute.
Then check the input file contents for the CustNumber node. One of those values may not match these attributes.
Hope this helps,
Bhanu

Similar Messages

Multi level mapping in PI. eg: A = B= C w/o BPM

Hi All,
I want to do multi level mapping withou BPM i.e Structure A to structure B mapping and Structure B to Structure C i.e
A=>B=> C. Let me know proc in PI 7.0/7.1 without BPM. Is this possible through Interface mapping or Interface determination ?
Thanks,
Jogula Ramesh

Hi Ramesh,
Finally you want Strcuture C as the out from PI System,?? if Yes then develop two mappings(A>B,B>C)and add it in Interface mapping,we can add any number of mappings in Interface mappings.
The source message to Interface mapping is A and receiver would be C.
This is will work.
Regards,
Raj

Error in Trace Level: could not create BPE proxy for message, no XML objec

Hi
We are doing a scenario of File to RFC using BPM and I am getting this errror in Tcode SXMB_MONI.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No object type found for this message; check the activation of the corresponding process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
And getting this error in Trace level
could not create BPE proxy for message, no XML object definition found for message EB32BB50610A11DC9648001321CB837D
Why this error occurs?
What could be in error?
Thanks in advance
Regards
Sami Qureshi

Hi Sami,
Check if thse threads can help u,
Error in BPE Adapter
BPM - BPE_ADAPTER errors
BPE Adapter Error
Exeception during execution error
***********Reward points if helpfull************

Error in content level mapping

Hi Gurus,
I designed star schema in that when as a standard practice (for making report performance faster) . I searched threads in forum and everything as defined i have done still I am getting errors.
1) I am setting content level agg. of fact for their based dimension then I am getting error in consistency check as
'[39008] Logical dimension table Dim_xyz has a source Dim_xyz that does not join to any fact source.'
, what i should do more for this ?
2) If i define content level mapping in dimensions for its same column like date for time dimension then i get error message as
'[nQSError: 14031] The content filter of a source for logical table: Dim_xyz references multiple dimensions.'
3) Also as we know fact table contains only measures and foreign keys of dimensions so why do i get error in consistency check as '[89001] The Physical Table '"Fact_xyz"' has no keys defined.'
I am fed of these stupid errors as why does not obi server understand that this is fact table. When I saw prebuilt rpd i did not find these types of error there.
Thanks for your instant reply,
Amol

Hi,
The scenario I am trying to test is a multi mapping scenario where I am trying to split one source message and create two target messages by using two different receiver interfaces, one for each message.
I am on PI 7.1 and when I test message mapping and operation mapping using the payload from SXMB_MONI, it is successful. Whereas when I test the scenario end to end I am getting the following error messages:
Operation Mapping
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Name
Employee_Out_SI_To_Employee1_In_SI_AND_Employee2_In_SI_OM
Namespace
http://accenture.com/1:N_multi-mapping
Runtime error
Split mapping created no messages
Start tag ns0:Messages Add raw attribute xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge" Start tag ns0:Message1 Close tag ns0:Message1 Start tag ns0:Message2 Close tag ns0:Message2 Close tag ns0:Messages
Could someone please help
Cheers,
S

How can I check and change the system set events trace level?

Dear all:
How can I check the system set events trace level? I don't want the alert_log so big.
Regards
Terry

Hi Terry;
Please check :
How to determine which system events are currently being set? [ID 845043.1]
How To List All The Named Events Set For A Database [ID 436036.1]
How to set EVENTS in the SPFILE [ID 160178.1]
Also check:
http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
http://www.akadia.com/services/ora_events.html
Hope it helps
Regard
Helios

How do I increase the trace level of the dev_server file?

I have a dual stack SCM system and the java stack will no longer start. I'm seeing some messages in the dev_server0 and dev_server1 files, in the work directory. But at the top of those files, it says the current trace level is at 1. I would like to have some further details as to the error. How do I increase the trace level of these files? Thank you.
~TJ

You can increase the trace level by changing the instance profile
set "jstart/TRACE = 3", (this affects the server0 process)
set "rdisp/TRACE = 2" (this affects the ICM).
Then Restart the ICM and the server process (e.g. from the SAP MMC -
there is no need to restart the entire instance),
hope this helps.
Regards
SuneeL

Trace level="1" type="T" -no interface action for sender or receiver found

Hi Experts,
I try to integrate PI and abap 7.0 using XI adapter (feel doubts about type).
RWB and SXMB_MONI at PI side show that test message was successfully sent. But I cant see it in DQ
http://cnh.com/XI/SDIIOC01/RCVR</Trace>
<Trace level="1" type="T">--no interface action for sender or receiver found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type
What could be the problem which I'm facing and how could I fix this
regards
nagendra

i understood its ur SAP XI to inbound proxy scenario?
Do the message in MONI of XI is showing correctly?
R u getting an error message in R3 moni?
Did u configure ur scenario correctly both at Xi n R3 using sproxy tcode.
chirag

Sbtio.log and trace levels

Hi all,
we're using Tivoli (TSM) with RMAN and I want to log error messages to USER_DUMP_DEST/sbtio.log . The log is there but always empty, even when there is a trace file stating there should be messages in it.
RMAN documentation says that sbtio.log must be configured with TSM. This does not seem to be true: I found that you can set a trace via ALLOCATE CHANNEL .... TRACE <integer>. I did NOT find anything in the RMAN documentation on this topic.
Can anyone enlighten me? What trace levels are there, what do I do to just get the errors dumped to the log? Any hints appreciated.
Thanks, Susanne

The 'details' can' tbe set to be more specific.
MAX_DUMP_FILE_SIZE specifies the maximum size of trace files (excluding the
alert file). Change this limit if you are concerned that trace files may use too much
space.
A numerical value for MAX_DUMP_FILE_SIZE specifies the maximum size in
operating system blocks.
A number followed by a K or M suffix specifies the file size in kilobytes or
megabytes.
The special value string UNLIMITED means that there is no upper limit on trace
file size. Thus, dump files can be as large as the operating system permits.
See Also:
Oracle9i Database Performance Tuning Guide and Reference for
more information on setting this parameter
Your operating system-specific Oracle documentation for the
default value and range of values
Parameter type String
Syntax MAX_DUMP_FILE_SIZE = {integer [K | M] |
UNLIMITED}
Default value UNLIMITED
Parameter class Dynamic: ALTER SESSION, ALTER SYSTEM
Range of values 0 to unlimited, or UNLIMITED
See Also: Oracle9i Database Administrators Guide and Oracle9i
Database Performance Tuning Guide and Reference for more
information on setting this parameter

Trace level changed

Dear Experts,
I have an RFC function which contains a submit report to execute in background. Normally our system has trace level = '0' in SM50, but everytime when this job runs, the trace level changes to '2', which saved too many logs in our system.
can anybody tell me how to prevent this situation? Can I force trace level = '0'?
Thanks!
Joanne Wu

Hi Joanne,
We just came across this trace level change. Did you find a reason and/or solution as to why this happened. We are researching as I write this and just came across Note 987134 which may offer insite. However, this note talks of Kernel 4.6D, 6.0 and 7.0. We are running on 4.6D_EXT for another month and this note says nothing about this kernel. Hope you have an anwser. Thanks.
Paul G

Trace level of RWB's Message Monitoring - Detail Message - Tab "Audit log"

Hi,
My flow is: File -> PI -> Transformed File with seeburger module. Everything is good except the trace level in RWB.
Exactly, in our PI production, under RWB -> Message Monitoring, when I select a message (e.g PI -> Outside) and see its Detail, under tab "Audit Log", I have a log with only 2 pages (which corresponds to the sender part "File -> PI")... whereas in our PI pre-production, I have 4 pages for the exact same flow, on which I have also info of the receiver part "PI -> Outside"...
My question is just: do you know which parameter is involved in this trace level of RWB's Message Monitoring Detail log ?
regards.
Mickael
Note: in [Help SAP|http://help.sap.com/saphelp_nw04/helpdata/en/fd/16e140a786702ae10000000a155106/frameset.htm], I see only this sentence "Audit Log: The audit log for the selected message is displayed as the default setting.".
Edited by: Mickael Huchet on Oct 18, 2011 1:59 PM

Hi Shabarish,
Thanks that will help to localize my search.
else by hazard, you don't know which parameter in this tree is for the "Audit Log"?
coz I did a quick look in prod and pre-prod, but it seems the severity is the same (e.g "Info" for most of them) whereas the trace level of "Audit log" is different.
Thanks for
Regards.

Setting logging trace level

Hello,
Is it possible to set the logging trace level(FATAL, ERROR, ...DEBUG) for the following jolt components :
JRLY, JRAD, JSL, JSH ? If yes how ? If no how can we debbug this component ? or make the logs more talkative ?
Thanks in advance for your answers
pledreau

There aren't any configurable debug levels available to customers in Jolt.
Your best bet for debugging this component is to turn on the TMTRACE
facility. Depending on which ATMI APIs your application is using, this will
produce few or no additional userlog messages from the Jolt processes
themselves, but it will produce a significant amount of additional userlog
information from the application servers that are called by Jolt, which may
be of help in debugging.
Ed
<First Last> wrote in message news:[email protected]..
Hello,
Is it possible to set the logging trace level(FATAL, ERROR, ...DEBUG) for
the following jolt components :
JRLY, JRAD, JSL, JSH ? If yes how ? If no how can we debbug this component
? or make the logs more talkative ?
Thanks in advance for your answers
pledreau

When I open BEx, error message appears: "....trace level 8 activated.."

Hi,
when i open bex, then it appears:
"SAPGUI 640
Enviroment information:
Directory: 'C:\Documents and Setting\ ...\SapWorkDir
trace level 8 activated
logging activated
For maximum data security delete the settings as soon as possible."
But I dont know, which setting it is meaning.
Thanks zd.

Jan,
The "*." should NOT be in the registry.
We are still experiencing the problem and have a customer message into SAP. The problem only occurs logging on through SAP Portal. It occurs on Sun J2SE version 1.5 and 1.4.2 consistently. It occurs using the Microsoft VM occaisionaly. Deleting cookies, temporary internet files and clearing the history in IE seems to solve the problem for users using the Microsoft JVM.
We are on XP SP2 with all the latest MS security patches. Since we use Portals as the main logon process, we have the registry key set to prevent saplogon from launching when the user logs on.
Hope that helps,
John

Unable to set trace level

Hello,
I have a problem with the trace level (by trace level I mean this one: http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/tracing_logging.html) in the Java Console when deploying a Java Applet.
With "Next Generation Java Plugin" (JPI >= 1.6.0_10) disabled I am able to set a trace level (0-5) in the java console; if it is enabled I am not able to set a trace level. The Problem is: it seems all outputs written to the Java Console seem to be added to one string, so if there are many trace messages in the java console you'll get a OutOfMemoryException.
And to make things even better: with JPI 1.6U19 and U20 I am not even able to disable the "Next Generation Java Plugin" (well theoretically I am but it seems to ignore my settings).
Also adding Applet Parameters (-Djavaplugin.trace=false -Djavaplugin.trace.option=off) for setting tracelevels has no effect, I get trace messages for loading resources etc. in the java console (Stating "image loaded: jar:http://what.ever.else/some.jar!some.image").
I tested with various Java Plugins (1.6U17, U19 and U20) and various Browsers (IE6 and Firefox 3.5) on WinXP SP2 with no difference.
Does anybody have a clue how to turn off this tracing permanently as it fills up my heap?!?
cheers
Christian

Where exactely did you change the localisation to US and has this to be done on every client running the web interface or just the server it's running on?

XSJS Tracing - Trace files do not show trace levels other than 'error'

Hi!
I'm doing some experiments with server side javascript tracing on Hana. I created a small xsjs file that searches for some parameters on the web request (first name, last name and email) so I can call a DB procedure later. As I wanted to make sure that client data was arriving to the server properly, I added some trace calls using $.trace as you can see in the snipped below.
After some time I noticed that just $.trace.error calls were added to xsengine*trc trace files. In other words, information, debug and warnings were not being included on the trace files.
$.trace.info("INFO: Register_user.xsjs called");
$.trace.error("ERROR: Register_user.xsjs called");
if($.request.method === $.net.http.POST || $.request.method === $.net.http.GET) {
    var first_name = $.request.parameters.get("first_name");
    var last_name = $.request.parameters.get("last_name");
    var email = $.request.parameters.get("email");
    $.trace.error("ERROR: First Name:" + first_name);
    $.trace.error("ERROR: Last Name:" + last_name);
    $.trace.error("ERROR: Email:" + email);
    $.trace.warning("WARNING: First Name:" + first_name);
    $.trace.warning("WARNING: Last Name:" + last_name);
    $.trace.warning("WARNING: Email:" + email);
    // send response
    $.response.contentType = "application/json";
    $.response.status = $.net.http.OK;
    $.response.setBody(" { \"message\" : \"User registered successfully\"} ");
} else {
    // unsupported method
$.trace.error("ERROR: Method was not POST");
    $.response.status = $.net.http.INTERNAL_SERVER_ERROR;
A small piece of a xsengine*.trc file is shown below.
[4940]{-1}[-1/-1] 2014-09-08 20:37:10.453384 e xsa: demo.user_c register_user.xsjs(00026) : ERROR: Register_user.xsjs called
[4940]{-1}[-1/-1] 2014-09-08 20:37:10.453690 e xsa: demo.user_c register_user.xsjs(00037) : ERROR: First Name:war
[4940]{-1}[-1/-1] 2014-09-08 20:37:10.453710 e xsa: demo.user_c register_user.xsjs(00038) : ERROR: Last Name:ning
[4940]{-1}[-1/-1] 2014-09-08 20:37:10.453796 e xsa: demo.user_c register_user.xsjs(00039) : ERROR: Email:[email protected]
[4940]{-1}[-1/-1] 2014-09-08 20:58:21.854254 e xsa: demo.user_c register_user.xsjs(00024) : ERROR: request path: /demo/user_creation/logic/register_user.xsjs
[4940]{-1}[-1/-1] 2014-09-08 20:58:21.854285 e xsa: demo.user_c register_user.xsjs(00026) : ERROR: Register_user.xsjs called
Here are my doubts:
Is there any standard filter for trace calls (which for example would show just error messages as default)? If there is, where to change it?
Are there separate trace files for each trace level?
Looking at the beginning of each row on the trace file, are the numbers from the left side of the timestamp somehow relevant to determine what kind of trace leve is shown? What do they mean? (the sequence of [4635]{-1}[-1/-1] )
Related (and useful) links which couldn't solve the problem:
How to print from XSJS to Console
JSDoc: Namespace: trace
I'm using:
Cloudshare (SAP HANA SPS6 server)
Hana Studio Version: 1.80.3
Thanks for the support!

Hi Fabio,
You need to do some configurations. Please have a look at Trace Server-Side JavaScript Applications - SAP HANA Developer Guide - SAP Library and View XS JavaScript Application Trace Files - SAP HANA Developer Guide - SAP Library
Best regards,
Wenjun

Trace levels

Hi,
We are facing problem of archieve folder occuping lot of space.
I would like to check if we have set optimum log & trace levels.
I have gone through below link:
http://help.sap.com/saphelp_nw04/helpdata/en/e2/f410409f088f5ce10000000a155106/frameset.htm
Here, it says that "tracing is not normally turned on".
How can I check if tracing is turned on or off in my case? Do I have to manually set all nodes in location tree to None and then change it to info as and when required?
Suggestions are appeciated.
Regards,
Apurva

The archive folder contains the trace files in compressed format.
You can always delete the compress files if you are sure you don't need to see those trace entries.
Turning the Trace Levels to "Default" in Visual Administrator should reduce your trace output.
You should select the top level of the Log Configurator and then press the "set default" option to apply to all sub-levels.
Hope this helps.

Trace level mapping BPM

Similar Messages

Maybe you are looking for