Tracking a deleted variant.

how to track a deleted variant.its not found in var*..pls help me

Hi,
Once u delete that cannot be tracked.
Thanks,
Sriram Ponna.

Similar Messages

Source system in PSA deletion variant

Dear Experts
In process chain PSA deletion variant,in source system column I will give the Development source system name(C6D),and after transport to the Quality styem(C6Q) Should I change this source system manually in qualtiy or system automatically will pick up the corresponding source system name?If not,what is the possible solution since we dont have any access in quality system.
Cheers
Rajesh

Thanks for the reply.I got doubt because in DEV we have to enter manually both DS and SOURCE SYSTEM manually...after importing to Quality will it change the source system name?...Can i take for grant...Pls confirm....
Rajesh

WD Abap ALV - Deleting Variant

hi folks,
i have a webdynpro abap application which uses a default variant. Now i deleted some rows of the ALV table, now the application dumps as it wants to load the default variant with rows that are no longer in the alv table.
does anybody has a utility to switch off the loading of the default variant or do delete variants of an abap wd component.
kind regards
oliver

Hi Jagruti,
it's kind of simple, you just have to do 2 things:
A) identify the table as hierarchy table:
wd_this->go_table is the reference to wd alv object:
wd_this->go_table->if_salv_wd_table_settings~set_display_type( if_salv_wd_c_table_settings=>display_type_hierarchy ).
B) mark the columns you want to have as nodes with following statement:
ls_col is reference to the column!
ls_col-r_column->if_salv_wd_column_hierarchy~set_hierarchy_column( value = abap_true ).
oliver

Select an area of sound track and delete it without using the razor?

Is there a way to select an area of sound track and delete it without using the razor please?
Like drag and then cmd-delete or clear or something would seem intuitive?
Thanks Steve z denver

Set In and Out Points to define the region, then use the Lift command (Sequence>Lift). Note that the Lift command functions based on track targetting, so if the Video track is also targetted, the content will be removed there, too.

Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

Only one track is downloaded per album on itunes on my iphone 5. Every time I download a new track it deletes the previously downloaded track on that album. Why is this happening and how can I switch it off?

Most YouTube content requires the Flash plugin. Sometimes it's necessary to uninstall then reinstall that plugin.
Uninstall the Flash plugin then reinstall new > Troubleshoot Flash Player | Mac OS
Very important to uninstall the currently installed plugin first.
Now launch Safari and try a video.
If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. It can also be installed as a plugin in /Library/Internet-Plug-Ins.
And check to see if Safari is running in 32 bit mode. Right or control click the Safari icon in your Applications folder then click Get Info. If the box next to: Open in 32 bit mode is selected, deselect, quit then relaunch Safari.
You may also need to delete the cache associated with Safari .
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/paste: ~/Library/Caches/com.apple.Safari
Click Go the move the Cache.db file from the com.apple.Safari folder to the Trash.
Quit and relaunch Safari. Try a video.

How to delete a word mistake in a vocal track without deleting the whole track

How to delete a work mistake in a vocal track without deleting the whole track

jon w. (nichimyoun) wrote:
How to delete a work mistake in a vocal track without deleting the whole track
http://www.bulletsandbones.com/GB/GBFAQ.html#cutsection
(Let the page FULLY load. The link to your answer is at the top of your screen)

HT1296 I downloaded an album from i Tunes to my i Phone 4 but somehow all but two of the tracks have deleted themselves from there. When I try to synch again (from a Windows pc) I can't upload the missing tracks again. they are playable from the PC but no

I downloaded an album from i Tunes to my i Phone 4 but somehow all but two of the tracks have deleted themselves from there. When I try to synch again (from a Windows PC) I can't upload the missing tracks again. They are playable from the PC but not the i Phone. Any ideas?

You may have to sync all your music off your phone (by unchecking Sync Music on the Music tab of your iTunes sync settings and syncing), then sync it back on to fix this.

How do i mute an audio track without deleting it.

how do i mute an audio track without deleting it?

There have been a few recent posts, where Audio Mixer settings are not "held," in PrE 11. Those cited problems seem to be Project-specific, in that Audio Mixer works, as expected, in a new Project - just not the one, causing issues.
I do not know if there is a glitch/Bug in Audio Mixer, or if the users are doing something that is "disconnecting" Audio Mixer in some way.
As a test, create a New Project, Import a Video file with Audio (Muxed Video Stream and Audio Stream), and test Audio Mixer, and the Mute function there. How does Audio Mixer work in that Project? Does the Muting of the Audio "stick?"
Second test: in your existing Project, Select all the Clips on that Audio Track #1, and drag them to Audio Track #2, or another, empty Audio Track, and test the Mute for that new Track, in Audio Mixer. How does that work for you? Does the Mute stick?
Good luck,
Hunt

In Final Cut Pro X 10.1.1 I'm trying to separate left and right stereo tracks to delete left and pan right to centre. I cannot find a way to do this.

I record in stereo with a 10KHz tone down the left channel to defeat AGC on my camera and mic feed into the right channel. When I edit, I want to mute/delete the left channel and pan the right into the centre, to leave me with mono audio across both left and right. I could do this easily in FCP 6 but can find no way to do it in FCP X. I'm using the same source files. When I choose Dual Mono mode in the Audio Inspector, it mixes left and right and pushes the combined signal into both channels, giving me a mix of 10KHZ tone and audio in both left and right. Stereo mode shows me the two channels correctly with one driven hard (the tone) and the other at good voice levels. I just want to kill the left channel and pan the right to centre.
I'm converting original TOD files using MPEG Streamclip before import and definitely keeping audio as stereo.
This is driving me nuts! It should be simple and is in FCP 6. Any help greatly appreciated.
Stereo Setting
Mono Setting

Mb - If you're using FCPX 10.1.1 and Mavericks, make certain you've downloaded the most current Sony XDCAM FCPX plugin from sonycreativesortware.com unless you're using an older version of FCPX and then you'd need the previous XDCAM plugin.
You shouldn't see 8 mono tracks. There are import settings in /fCPX that you can check and I don't ask FCPX to analyze my media or seperate mono or combine stereo, etc. I like to have everything come in as it is, especially because I know what I've done with every channel, etc.
What I wrote to Ian is what I'd tell you - so please take a look at how you can make a "stereo" track that is actually two mono tracks, mono. Once you do that you can address each mono channel by itself since it needs different volume, compression, and EQ than other channels.
There are ethernet, USB, and firewire controllers that work in FCPX, but that's not the typical workflow because generally if you're getting into any amount of post audio sweetening beyond basic "staples" audio treatment, you would instead use "Roles" to export your audio to Logic or Pro Tools and do you work in those applications and then cut the final product back into your FCPX project. In Logic or Pro Tools is where you might use a controller.
In terms of automating levels, I'm not positive I know what you mean. Compressor is a nice internal Logic plugin that kind of automates levels in a way but its about compressing peaks at a threshold that you set and at a ratio of compression. So I may not understand what other automation is available unless you've exported you tracks to Logic or Pro Tools.

How to track the transported Variant for a program

Hi All ,
Can anyone please let me know how to track the modifications done on program variants , and how to track if it has been transported .
Thanks In Advance .

Hi Balaji
Variants are stored in the table VARID.
Pushpraj

Tracking report deletion by Users

hi Experts,
we have a client requirement,where we are providing shared folder access to the end users.now we want to track (in a log file or some other way) , if an end user deletes a report then we shall be able to the path from which report was deleted , timestamp and login id used.
thanks in advance for ur help
Cheers
Ankit Gupta

There is a possibility of knowing the deleted catalog object but to know the user info I'm not sure.. if possible try explore it.
For this you may have to go with Subversion kind process, I see there is blog in Rittman site for the same using SVNSubversion.
If helps pls mark

Seeburger message tracking archiving / deleting question

Hello,
We are using Seeburger 1.7 with XI 7.0 for our EDI translations..We store information in Seeburger Message Tracking for our business requirements.I would like to know how these entries could be archived(Compressed) and stored or deleted after certain days so that we wont max up our storage..?
Any suggestions are appreciated.
Thanks in advance!
Larry

Prateek,
Thanks for your response.Yes,I could find the "Archive Configuration" option..when I click that it shows me a screen saying show master data with two items with check boxes (Document Types & Archiving Systems)..On clicking the details of them I see set of parameters which shows the profile and the document type..not sure how to proceed from here to set up any archiving / deletion..any help is appreciated..
Regards,
Larry.

/BIC/ namespace not modifiable, can't create PSA delete variant in process

Hello,
When I attempt to create a PSA delete process in a process chain, I get an error message as such:
Namespace '/BIC/' must be set to 'changeable' (transaction SE06)
Message no. R7063
I have had Basis dot his for me before and it worked, but it takes a lot of change menagement to do this. I have asked Basis to leave it modifiable in SE06, but they will not. Is that the only way to be able to create PSA process variants is to have Basis use SE06? I looked in Object Changeability, but nothing stuck out. I should not have to have Basis do this task every time. Please let me know if there is a better way.
Thank you.
Brent

Hi Brent
I believe /BIC/ namespace should remain modifiable where you are creating PSA deletion process.
You can check if that is the case in your system.
Check in TRNSPACE table with namespace /BIC/ .. changagle flag should be X. I think it should be in your production also
Regards
Anindya
Edited by: Anindya Bose on Mar 8, 2012 4:52 AM

Track changes-deletions shown in bubbles v. cross out in text

Is there an option of showing deletions as cross-outs in the text rather than in bubbles on the side (like the option available in Word)?

mhn,
When Tracking is On, you have controls at the bottom of the Tool Bar. Every option you could desire is there regarding what is displayed with respect to tracking. See page 70 of the English version of the Pages 09 User Guide PDF.
Jerry

PSA deletion variant - Syntax error in program "SAPLRS_PSA_DEL_GUI

Hi.
Recently, we have implemented the note 1357168 to overcome the error "Object name &1 after the prefix has to start with ABC...XYZ".
But after that if we maintain any PSA/Change log variant we are getting the below error Syntax error in program "SAPLRS_PSA_DEL_GUI.
We have identified the class CL_RS_PSA_DEL_MASS_DELETION for that. but not able to figure it out what is the issue.
please help.

check this
Note 1388321 - 7.01SP6:Short dump in maintaining PSA deletion variant

Tracking a deleted variant.

Similar Messages

Maybe you are looking for