Trading goods sales order

dear
When i order for trading goods order type ZTRD then i do delivery vl01n then it shows error like this
@5C\QError@ 1100000193 10 Copying is not poss.because an entry is missing in Table TVCPL: ZTRD ZTAN
then what should i do?
plz reply soon
thanx
mk

Hi there,
It means that you have not done the copy control VTLA at item level for the order item ZTAN to delivery item ZTRD. Maintain the copy controls at header & item level, system will allow you to create delivery.
Regards,
Sivanand

Similar Messages

Free Goods Sales Order for Charities with Credit Limit

Dear All
I have a scenario where POS (Point of Sales) has been implemented,the process of POS is ok,but the requirement of the client is they are giving some goods to charity,when ever a person comes with a special card (Issued by the company) the outlet will create a sales order for the same without any charges with a credit limit of 1000 SAR (saudi arabian riyal).
Requirement
1) Creation of sales order with delivering goods but without any charges.(should have effect in Stock)
2)These charities is been treated as Customer with a credit limit of SAR 1000 (whenever the credit limit exceeds system should block the order)
how this scenario can be mapped in SD,
Thanks in advance
Malik

Dear Malik
keep the process regular, which will help in blocking the charity customer when reached 1000 SAr at order level itself.
As customer need to be shown that he is not charged.
you can work on changing the display of output determination .
You can take the help of Ababer and display what ever client is asking for.
I think this may solve your query without disturbing you regular business process.
Regards
Pavan Kumar

Free goods- Sales Order Quota for a customer

Dear Experts
I want to restrict the Quota of an free SKU ( Material) to a specific customer.
For Eg:-- If a Distributor limit is set for a Consumer Offer as 100 CS. Once the 100 CS is exceeded, System must stop further orders of the item on the Same Customer. It should work similar to Credit Control only difference is that Restriction is at Customer SKU & Quantity.
Can you please guide me how can i capture the above requirement, is there any Standard process or shall i need to define any customized logic.
Does product allocation scenario help to achieve this.
Regards
Avinash

When we maintain the minimum order quantity field in the material master then we will get an warning message if we donot maintain that quantity while creating the sales order.
If you want an error message use the user exit "USEREXIT_SAVE_DOCUMENT_PREPARE".
you can write a coding here whatever you want Minimum, maximum and multiple limits by leveraging any custom table based on customer.

G/L account no missing in sales order-issue

Hi Experts,
I am getting error: G/L account missing while saving the sales order.
It is available in incompletion log, when i choos that it is going to item conditions tab directly.
It seems related to VPRS condition type, because that sales order related to free goods sales order.
There is no pricing condition type, only VPRS condition type is thr.
Please help us to solve this issue. What would be the reason, is there any costing assignment required?
Regards
Lakshmikanth

Dear Lakshmikanth,
To analyse the cause of the error:
VA02 --> Key-in Sales Order No. and Hit "Enter" --> Double Click on to Sales Order Line-item --> Tab: Condition --> Sun-Tab: Analysis
on to next screen, For your Condition Type, check what condition records are missing.
This will help you to maintain Relevant Condition Record, to resolve error.
For Example:
In VKOA, G/L might not be maintained for Condition Type: KOFI/ KOFK.
Best Regards,
Amit
Note: You may also post the Error-Analysis for our understanding.

Sales order CIF performance

Hello SCM experts,
We are trying to CIF initial load of sales orders for 2 materials; Each material has Variant configuration. There are 25 APO relevant VC characteristics for each material.
Therefore, total volume of VC materials = 2
Each material has 30,000 sales orders per month.
We are trying to integrate sales orders to SCM 7.0 version; Total volume of sales orders is 100,000 for the Initial load.
Currently, the performance of this integration is worse and takes around 20 hours.
I want to know of any other clients that have good sales order volumes.
Has anyone seen a sales order volume of 100,000 with Variant configuration? What is the best performance that should be expected for this volume?
Appreciate any inputs.

Hi Louis,
Have you considered uses of parallel processing while activating initial load integration model?
I think by processing SOs in parallel processes, it will definitely improve performance.
Please let us know your latest situation.
Regards,
Abhay Kapase

ORDERS05 IDoc User Exit - Create Sales Order

Greetings,
I'm working at a client where they are using the ORDERS05 IDoc in conjunction with the Process code ORDE to create customer finished goods sales orders in a 46C system. When the IDoc segment E1EDP19 is qualified with "003" and the article's UPC/EAN is supplied in the material field and conversion of the UPC to material is executed during processing when the sales order type is "ZEDI" however this conversion is not executed with any other sales order type, so I suspect a user exit routine however I checked the usual suspects.
MM06E001
VEDB0001
MCP20008
MM06E001
VEDA0001
But not code for the UPC to material conversion.
Any insight is alway appreciated and rewarded.
Thanks!

Joseph,
Take a look in the function module EXIT_SAPLVEDA_001, see if there's an include there. We have an include there containing our Customisations, including for the E1EDP19 segment.
Cheers, Paul.

Sale order costing for Trading goods

Dear Experts,
My client having retail industry.Client used to sold customers also like outwright customers direct sales not through retail stores. Now business would like to check margin agasinst one sale order through costing. My SAP working enviornment is IS Retail ECC6.0.
1. Is it possible to do sale order costing for trading goods.(Goods p[urchased for all stores not particular customer)
2.Wihtour BOM is it possible?
3.Please forward any user docs ,if possible that costing
Costing sheet like this
1.Trading goods
2.Packaging materila
3.Overheads.Planned
Beat Rgds
Suma

Answerd with Condition type

How to do Goods Issue from Sales Order Stock?

Dear All,
we are doing a trading Scenario & based on customer requirement we procure the goods from our vendor & we receive it to Sales Order(special) Stock. Now what are the settings to be done in the Sales/Shipping so that when we do a delivery for our customer the Stock is Issued from our Un-res Sales Order Stock & not from un-res stock ?
Hope its clear.
Regards,

Hi Sam,
Thanks a lot for the reply.
Sorry for not explaining the scenario in the begining.
See I have to configure a trading Scenario with some changes from the std.
As in trading Process there are 3 entities.
1. Customer - X
2. Company - Y (Who performs trading)
3. Vendor - Z
Following is the breif requirment.
Company Y generated an inquiry in system for an item with respect to customers RFQ. Now since Y doesnt manufacture the product(item) it creates a PR in background with respect to inquiry.
Based on this PR, Y procures & receives the good into Un-restricted Sales Order Stock (with ref Inquiry doc no:).
Now based on price Quoted by Z, Y will create a Quotation with ref to inquiry & finally a SO for Customer - X with ref to the Quotation.
Now at the time of delivery (creatd with ref SO) system is not able to issue the goods from the sales order stock since the stock is stored with ref to inquiry no: & delivery is with ref to SO.
So I am planning to simulate a cycle by creating a delivery & PGI with ref to Inquiry.
If you can suggest a way out, it will be highly appreciable.
Hope its clear.
Regards,

How to restrict manual changing of free goods in sales order

Hi ,
Goodmorning ,
We have some requirement : In sales order free goods quantity determination by system should not be allowed to change manually , where can we do this ?
Looking for your inputs
Thanks and regards
Venkat

As per SAP Standard, when the main Item quantity is changed, the Free Goods are redetermined. In this case any manual changes to Free Goods Quantities are lost.
But your requirement is for restricting the Chages of the Quantity of Free Goods Correct?
I believe there is no SAP standard solution for this. You will have to apply a User Exit, which will check the Item category of each LIne item & if it is free goods (TANN) then changes are not permitted.
Hope this helps.
Thanks,
Jignesh Mehta

Free Goods Problem and User Exit if needed in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka Mitra

Hello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks.

Free goods should not determine in sales order

Hi,
I have maintained the free goods determination in SAP CRM with validity period in T Code: /sapcnd/gcm and have created a quotation for the material which has a free goods validity.The free goods are determined at quotation level, when i was converting the quotation to the sales order the free goods validity period got expaired.In this case the free goods are should not get determined in the sales order.But when i test it in IDES system the free goods are getting determined in the sales order eventhough free goods validity period expaired.
Can any one tell me how to restict the free goods in the sales order level when the validity period expaired at the time of sales order create.
Regards
Nagaraju

Hi ,
You can use the BADI CRM_COPY_BADI. Here you can implement the check for products which are free and have expired to be excluded from copying from quotation to sales order.
Regards
Kavindra

Free Goods Problem in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of SD / ABAP(if needed).
Thanks & Regards
Priyanka Mitra

Yes Priyanka
This is a very interesting and a challenging issue or question
I think because of the prorata calculation type the extra 2 units is coming
This logical error has happened to me too
Inclusive 210 units means we have defined as 192 + 18 in VBN1
But the system determines the free goods in sales order as 190 + 20 that means there are 2 units which are going free than what has been maintained as condition record
But system converts our logic into its own thro that calcultion type PRO RATA which is the main culprit here
So it requires ABAP help
This qn should be awarded points (unfortunately i am not able to do so)
Regards
Raja

Free goods condition records - Usage in Sales Order

HI,
I have so many condition records in various KOTN9xx tables, which are for issuing free goods. If I see a sales order item, that is a free good, how do I know, on what basis (based on which condition record, in which condition table) that free good was issued?
Technically speaking: Similar to KONV table for storing transaction data on pricing, is there a table for storing transaction data on free goods?
Thanks,
Juwin

Find the table number of the key combination of customer / material . & you can extract free goods condition records from this table.
Search in SE11 with the table number.

Giving BOM material as free good in Sales Order

Hi,
I have a business requirement.
I want to give a free good in Sales Oreder which is a BOM material.This should be possible by manually changing Item category for the line item in the Sales Order just like how we can change TAN to TANN in normal circumsatnces when we add free good material for any NON BOM material.
In standard functionality,the item category determined for this BOM material is TAQ but this item category field in Sales Order is non editable because of which I can not include the BOM material as free good in my sales order.
I have already defined one z Item category for free goods for this BOM material & want to use it in Sales Order.
Can you please suggest how this can be handled ?
Or is there any other work around by which will allow me to include BOM material as free good in my Sales Order ?
Thanks in advance
Regards,
BM

Hi,
Thanks everyone for the feedback.I agree with Samir Danish.It is a standard functionality of SAP which does not allow free goods for BOM material.
However, can someone suggest work around to deal with this issue.I mean if any one has been doing any work around for this issue then please let me know.It s becoming critical for me.
Regards,
BM

Free goods-more than one material as a free item in sales order

Hi,
We have a requirement for our client in free goods scenario in which the client wants to give more than one material(2or3 etc) as a free item in the sales order.I have already explored the slaes BOM functionality,anyother suggestions other than Sales BOM will be of great help to me.
Thanks

Hi Sam,
Check out my [post|Re: Free goods process requirement] wherein I had the same problem once upon a time.
We tried all possible things, however concluded that through std SAP functionality the same is not possible.
FYI: Free Goods doesnt support BOM, Sub items, Product selection. etc.
Regards,
Amit
Edited by: Amit Iyer on May 12, 2011 3:01 PM

Trading goods sales order

Similar Messages

Maybe you are looking for