Training Software (with quiz ability)
Is there a training sw program (with quiz ability) I could use to deliver online training to others that would be compatible with my iMac w/ Microsoft Office for Apple??
Maureen,
Keynote would be the closest thing in the iWork suite to being able to do what you seem to be looking for. Check out this tutorial on the MacMost site describing how to create a quiz in KN.
http://macmost.com/creating-quiz-games-in-iwork-keynote.html
Jerry
Similar Messages
-
Hi
Does anyone know where i can obtain SAP Software R3 + CRM so that i can use to train. I beleive that SAP Marketplace has software to download but i am not sure if it costs anything? I think the training software is called IDES?
Has anyone downloaded this software and can provide me with a link and costing then that will be great.
Thanks
Avijust did a search ... C if these links help !!!
IDES for XI ?
Cost of XI/NetWeaver -
After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try againHi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem
-
I have Microsoft Office 2004 on my MacBook (2.4 GHz Intel Core 2 Duo). It is currently up to date with Microsoft updates. I am running Mac OS 10.6.8. I just updated my Mac software with "Security Update 2012-001". I am now unable to print (Epson NX510 printer) from Excel or Word. When I click on the Print menu item in Excel, there is a flash in the background like it is trying to open the print window, but nothing else. I am able to print from other programs like TextEdit, Mail or KakeidaGraph. As far as I know I have the latest Epson print driver.
Also, I am also unable to open an existing Excel or Word file from the open menu - both programs lock up and do not respond. I have to force quit. After I restart Excel or Word I can open an existing file by double clicking on the file, but if I again try to open another file from the open menu, Excel or Word lock up.
Any similar problems?Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
======================= -
How to do a single channel DAQ using NI-DAQ driver software with a PCI-MIO-16XE-10 card
Hi,
I would like to find out how I could do a simple one channel Data Acquisition from a signal generator using the NI-DAQ driver software with a PCI-MIO-16XE-10 card.
I have written some test problem but even when the signal generator is turned on/off I get back some weird values.
Here is my code.
CString sFunctionName("");
double volt[OUTPUT_POINTS*2];
double out[OUTPUT_POINTS*2];
short timebase, ready, code, stopped;
unsigned short sampleInterval;
int i, status, count=0;
unsigned long update, points;
short* ai_buffer;
short output_ch_vector[16];
int local_ITERATIONS = 2;
SAFEARRAYBOUND bound[1];
double dataItem = 9.9;
long j;
long k;
double* pTheValues;
LPTSTR lpsz_ErrMsg;
// Initialise device
status = Init_DA_Brds (deviceNumber, deviceNumberCode)
Initializes the hardware and software states of a National Instruments
DAQ device to its default state and returns a numeric device code that
corresponds to the type of device initialized
Init_DA_Brds(DEVICE, &code);
// Check return code from Init_DA_Brds
Code return should be 204: PCI-MIO-16XE-10.
if (code < 0)
CString sError;
sError.Format("Code error: %d", code);
if (code == -1)
sError = sError + ": No device found";
LPTSTR lpsz = new TCHAR[sError.GetLength()+1];
_tcscpy(lpsz, sError);
AfxMessageBox(lpsz);
delete lpsz;
return S_FALSE;
// Allocate memory for analog output and input arrays
//ao_buffer = new short[OUTPUT_POINTS*2];
ai_buffer = new short[OUTPUT_POINTS];
// Set double-buffering
status = DAQ_DB_Config (deviceNumber, DBmode)
Enables or disables double-buffered DAQ operations.
status = DAQ_DB_Config(DEVICE, 1);
if (status < 0 )
sFunctionName = "DAQ_DB_Config";
goto TidyUp;
// Get the rate parameters
status = DAQ_Rate (rate, units, timebase, sampleInterval)
Converts a DAQ rate into the timebase and sample-interval
values needed to produce the rate you want.
status = DAQ_Rate(RATE, 0, &timebase, &sampleInterval);
if (status < 0 )
sFunctionName = "DAQ_Rate";
goto TidyUp;
// Setup scan
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Initializes circuitry for a scanned data acquisition operation.
Initialization includes storing a table of the channel sequence
and gain setting for each channel to be digitized
status = SCAN_Setup(DEVICE, 1, ai_channels, gain);
if (status < 0 )
sFunctionName = "SCAN_Setup";
goto TidyUp;
status = SCAN_Start (deviceNumber, buffer, count, sampTimebase,
sampInterval, scanTimebase, scanInterval)
Initiates a multiple-channel scanned data acquisition operation,
with or without interval scanning, and stores its input in an array
status = SCAN_Start(DEVICE, ai_buffer, OUTPUT_POINTS, timebase, sampleInterval, timebase, 1000);
if (status < 0 )
sFunctionName = "SCAN_Start";
goto TidyUp;
while(count < local_ITERATIONS)
// Check whether we are ready to input another half-buffer
status = DAQ_DB_HalfReady(DEVICE, &ready, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_HalfReady";
goto TidyUp;
if (ready == 1)
status = DAQ_DB_Transfer(DEVICE, ai_buffer, &points, &stopped);
if (status < 0 )
sFunctionName = "DAQ_DB_Transfer";
goto TidyUp;
count++;
// Clear the analog input
status = DAQ_Clear (deviceNumber)
Cancels the current DAQ operation
(both single-channel and multiple-channel scanned) and reinitializes the DAQ circuitry.
status = DAQ_Clear(DEVICE);
if (status < 0 )
sFunctionName = "DAQ_Clear";
goto TidyUp;
status = SCAN_Demux (buffer, count, numChans, numMuxBrds)
Rearranges, or demultiplexes, data acquired by a SCAN operation
into row-major order, that is, each row of the array holding the
data corresponds to a scanned channel
status = SCAN_Demux(ai_buffer, OUTPUT_POINTS * 2, 2, 0);
if (status < 0 )
sFunctionName = "SCAN_Demux";
goto TidyUp;
//Convert binary values to voltages (Doesn't actually take a reading from board)
status = DAQ_VScale (deviceNumber, chan, gain, gainAdjust, offset, count, binArray, voltArray)
Converts the values of an array of acquired binary data and the gain setting for that data
to actual input voltages measured.
status = DAQ_VScale (1, 0, 1, 1.0, 0.0, OUTPUT_POINTS , ai_buffer, volt);
if (status < 0 )
sFunctionName = "DAQ_VScale";
goto TidyUp;Hello,
Please take a look at lots of examples available at :
1. www.ni.com >> NI Developer Zone >> Development Library >> Measurement Hardware
2. C:\program files\national instruments\ni-daq\examples\visualc
Sincerely,
Sastry V.
Applications Engineer
National Instruments -
I want to develop a software with AirPaly service for business things. How can I get the permission from Apple?
This one is used in Windows laptop, and I want it support AirPlay service, but Apple doesn't publish the AirPlay protocol.
Many thanks.Create a developer account, then access he developers forums and see if you can find the information that way
The other option would be to simply contact Apple directly. -
We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?
Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben -
I have 2 adobe accounts, one is my CS5 student license on my mac and one is as a CC trial on this PC.
The trial has run out and I want to buy the CC subscription for my PC but I cant because I signed up with a wrong email address for this account so cant log in to buy it and Adobe customer services are taking over 24 hours to get back to me.
For reference heres a better idea of my situation:
https://forums.adobe.com/message/7480974#7480974
Is it possible to buy the CC on my account associated with the account/software on my Mac onto this computer? (On that account I have already done the 30 day trial and also had it for under 30 days before cancelling CC and going back to CS5).
Or is it only possible to install the software with the specific account you signed up with? As when I have access to my Mac I would like to still use my CS5 on that but CC on this PC.(I really don't want to risk somehow screwing it up so I cant use my CS5)
Thanks a lot
VIn case the email is incorrect & it can not be verified then you can abandon that Adobe id, if you have purchased CC with incorrect Email, then you need to get the CC cancelled & buy a new CC with correct Email ID.
Please personally inbox me the incorrect Email ID for further investigations.
Regards
Rajshree -
My IPOD Classic Video 5. Gen. showed videos, but now it does no longer show them, instead i see a black picture on my IPOD and it doesn`t work. I have to restart it every time, i try it. i restore the software with itunes, but the problem still exists.
The Videos are showed up front 4 months, but now they are no longer to be seen. When you star a video first the hard drive starts, but then it stops and hangs up. I have to restart it, starting with the apple logo....Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc. -
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
I just installed OuickTime 7 Pro in my Mac Pro Ver 10.6.8. The video I am trying to view is codec h264 Compression dvcpro 50 hd. I have audio but no video. It says I need other software with QuickTime for it to work. Dose anyone know what I need?
H.264 video should be supported by your basic Snow Leopard operating system. The DVCPRO HD family of codecs is part of the Apple "Pro" codecs package which is normally installed as part of a "Pro" video editing suite installer or contemporaneously installed separately as part of one of the newer pro editing apps like FCPX. if you already have one of these pro suites or apps installed or available, then re-install the correct codec package that is missing. If not, you will need to purchase a Pro suite or app to be able to install the required codec package. -
Perform as pdf form with the ability to insert pictures
How to perform as pdf form. with the ability to insert pictures?
You want your users to be able to insert images into a PDF form? That is only possible if they're either using Acrobat, or if they're using the latest version of Reader (XI) and the image is in PDF format.
-
Distributing software with unlimited strength JCE policy files
I'm about to release some software that uses AES 256-bit encryption. I had to download the "Java Cryptography Extension (JCE) Unlimited Strength Jurisdiction Policy Files 6" to do this level of encryption. I'd like to distribute my software with a bundled version of the JRE that includes these policy files. The software will be available to download from the Internet for those who pay for the service. Placing it on the Internet is technically an export because it's available to anyone in the world.
I've talked to the Bureau of Industry and Security and they said I need to file for a classification number (ECCN). Is this necessary if I'm using Sun's software? The JCE has already been through the export approval process so it would make sense if just including it in my software required nothing. I haven't been able to find any information about what to do legally if using the unlimited strength policy files. What laws do I need to know about or comply with to do this? Also, are there any legal ramifications of including the JRE with my software? I'm using a custom jre launcher that lets me bundle whatever jre I want with my software, so I assume it's a common practice, but I'm not sure.
Any help would be appreciated.I posted this question on other sites as well, but never heard any good answers.
I've had to do some research and I've heard a few different things, but this is what I've learned:
Software being exported (putting on the Internet is an export) that contains symmetric encryption above 64-bit requires filling out a BIS-748P form. I had to first of all request a PIN and CIN (company id number) from the BIS so that I can access their SNAP-R system which is where you fill out and submit all the paper work (including the BIS-748P) online. I haven't filled that out yet, but once you do they will review your software and classify it with an ECCN number and depending on what if falls under they will require you to obtain a license or license exception. For what I'm doing (and what most probably need this for), a license is not needed. It's simply classified as a type of encryption software and they know who you are and what you're doing with it.
Until this is filed, the software is under a certain statute as to what you can do with it and there's a lot of legalities behind this entire process that I don't fully understand, but I think filling this paperwork out and talking to those who receive it is a good place to start.
I'm not a lawyer by any means and I could be missing some details, but this is what I understand about the process. If you learn anything else (or find some of this to be untrue), let me know. -
GLOBAL TEMPORAY TABLE with the ability for a user to see others's entries
I have a list of record available for many user at the same time for them to work on.
Every one has the tendency to chosse the first record...
I want each of the users to be able to chose a different record once the preceding record has been selected by another user.
It would have been somthing like a GLOBAL TEMPORAY TABLE but with the ability for every user to see others records
so I would do and anti-join...
Does anyon have an idea on how I could implement such a behavior?You will not be able to use a global temporary table for such a requirement.
It sounds like you will need a permanent table, which you will need to lock certain records (prohibiting users from taking those already in use), you can look at using the DBMS_LOCK package for this.
That's just speculation based on what you've typed, if you provide more details you make get more specific help. -
Hi all, I'm new to adobe captivate. I want to make a video but with quizzes in it. Which means that when I'm playing a video, it will stop at a certain time and a quiz will pop out. I've tried one myself however, it is not working. May I know if there is any sample video with quiz for me to download and test or is there any tutorial for me that teaches me how to do a video with a quiz? Thank you
Will have to repeat, what Rod already mentioned: mp4 is a video format, by definition that can never be interactive, so you will not be able to have quiz slides, because those are interactive. Only output to SWF or to HTML5 can allow interactivity.
You are not able to insert interactive elements (like buttons, click boxes, question slides) in a cpvc because that is meant only to create video, for the same reason we all try to explain to you.
Lilybiri -
Please would you stop bundling Anti-Virus software with Adobe Reader?
I would be really grateful if Adobe would stop bundling Anti-Virus software with the Adobe Reader updates. Pre-selecting the (download - Anti virus software) check-box in the dialogue box smacks of sharp practice. I have nothing against Anti-Virus software, but I want to take control of the process, not have Adobe make important choices for me: it really is very unprofessional.
This is a user forum; you have to put your request to Adobe.
Having said that, you can avoid bundled software by downloading the installer from http://get.adobe.com/reader/enterprise/
Updates/patches are best downloaded by navigating the FTP site ftp://ftp.adobe.com/pub/adobe/reader/
Maybe you are looking for
-
Cannot Connect to App Store/Trouble Connecting iPod to PC
Im using a iPod 5th generation, been a while now when ever i clicks on App Store it never connects Im also having trouble with Charging my iPod. When ever I connects it to my computer to sync it or to charge my iPod it pops up saying USB Device Not
-
How to update pdf file using adobe exportpdf
can you update a pdf if you only have the export pdf product? thx
-
How to use new iPad3 in conjunction with Lightroom on desktop iMac?
Workflow: Will this work? Camera RAW to iPad3 to Lightroom??? I would like to use my new iPad3 in conjunction with my already-established Lightroom workflow on my desktop Mac. What I have in mind is to shoot in RAW (Sony SLT A-65 - 24.3 megapixels
-
Create Internal Order Group massively
Hi Gurus, I need to create massively internal order group. Can someone help me? Thanks in advance. Angela
-
My canon EOS DIGITAL ver 24.0 in not working with mac pro os x
MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X