Transaction code for viewing invoice document and Claims document

Hi Experts,
Can u please tell me the transaction codes for viewing invoice document and claims document in ECC.
I am in CRM and i do not know about the ECC transaction codes.
request you 2 help.
Thanks and Regards
Shilpi

hi,
MM flow:
purchase Requestion (ME51)
Request for Quatation (ME41)
Quatation from different vendors (ME47)
price comparision (ME49)
purchase order send to vendors (ME22)
goods reciepts (MIGO)
logistic invoice verification (MIRO)
SD flow:
Enquirey (VA11)
Quatation (VA21)
sales order processing (VA01)
delivery (VL01)
billing (VF01)
Also follow this link.
The specified item was not found.
i hope this will help you out
-Thanks & regards
Saurabh Goel

Similar Messages

  • Transaction code for mass creation of physical Inventory document

    what is the transaction code for mass creation of physical Inventory document.

    MI31 is the transaction to create hundreds of physical inventory documents for annual inventory at a time.
    MICN can create several documents at a time for cycle count.
    Just look in the menu of phyiscal inventory into the knot Sessions, there are even more e.g. for counting of own stock a customer and vendor location, for vendor stock at own location etc.

  • Transaction code to view/edit IT0007 and IT0008

    Dear SAP Guru's,
    Can you please tell me the transaction code to view/edit IT0007 and IT0008?
    Sincerely,
    Ketan

    Hai..
    PA30/PA20

  • Transaction code for viewing Costing Sheet

    Hello Sap Gurus,
    I am a SAP user.Can you suggest me a Transaction code for viewing Costing Sheet.
    Regards,
    Pawan Kumar

    Dear Pawan Kumar,
    For checking the costing sheets related to product cost controlling use KZS2.
    For Costing sheets related to Internal orders use KALK.
    Regards
    Mangalraj.S
    Edited by: Mangalraj.S on Apr 20, 2009 3:06 PM

  • Transaction code for Proforma invoice

    Transaction code for Proforma invoice

    Hi,
    If you want to create proforma Invoice. First of all you have to maintain copy contol for billing. Where you can maintain in Billing F5/F8 and in source document you can maintain Delivery Document type of Sale order Document type as per your business requirement.
    After that in Transaction code VF01 you can create Proforma Invoice based on Sales Order No. of Delivery document No.
    Reward if it solves your querry.
    Thanks and Regards,
    Dilip Shende
    Edited by: DILIP SHENDE on Apr 4, 2008 2:09 PM

  • Transaction code for viewing billing details of a customer.

    Hi
    Do we have any tansaction code where we can view all the invoices related with a customer for a particular month.
    Please advise.
    Kind regards.
    Kate

    hi
    In R/3 VF05 will show list of all the invoices for the date chosen by the user entry
    This will show only list for a particular payer and material combination
    Regards
    N Ganesh

  • Transaction code for sales order totals and purchase order totals

    Hi i am using alv grid report to display the sales order and purchase order totals by productline(profit center)
    Now i have to call standard transactions from first list to display the totals of sales order and purchase order.I have to display these transctions for specfic orders and their specfic lineitems only.
    in VA05n transaction it is allowing me to enter only the document numer but not item.
    Can any one help to find the standard transaction to display the totals for only specific orders and line specific line items

    Hi Polite,
    The transaction CRMD_ORDER is the superset for all the transactions mentioned by you. So it is better to remember just one transaction instead of remembring the subsets . Once you use the transaction CRMD_ORDER and then Follow the menu Business transaction -> Create (F5) you will get the list of transactions you can create this is nothing but the the transactions you have mentioned.
    If you know the transaction no. you can directly open that in transaction CRMD_ORDER. The other opetion is to use the SAP Menu instead of transactions.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Program code n transaction code  for plant invoice

    Developed a SAP Script for the Plant Invoice. Plant invoice is a billing document which has the normal invoice details including the company, customer and vendor details.

    hi sivaranjhani ra... 
    ru a abaper?
    if yes y do u think the interveiwer will only ask about functional things ,
    Functional things come on 2 level
    first of all he will check ur abap skill
    if u don't impress him in techinal after dat he wll ask
    abt ur reports n scrpit,
    the basic thing he his goin to ask is name of table and y did u made change ( this all depends on ur exp)
    to check whether u hav really wrked on dat thing or ur give a fake .
    as for ur question
    u hav to know the flow
    u hav to know the tables,fields ,functional module u use
    and output type  and some script parameters
    with Regards
    Rohan Shetty

  • Transaction code for creation of Complaint and RMA?

    Hi,
    In the tcode crmd_order i've a complaint and return creation option is this the one to create complaint and return material authorization.
    pl also tell me how do you create a repair order and a service order.
    Pl I need transactions. I understand the configuration as I have the best prasctice bu I do not know the creation of RMA / Complaints/Repair order /service order ..that is the trnasactions required for service.
    For sales and marketing I know ..I am looking for service module in CRM
    can any one please help me out as it is a very urgent requirement.
    Thank you,

    Hi Polite,
    The transaction CRMD_ORDER is the superset for all the transactions mentioned by you. So it is better to remember just one transaction instead of remembring the subsets . Once you use the transaction CRMD_ORDER and then Follow the menu Business transaction -> Create (F5) you will get the list of transactions you can create this is nothing but the the transactions you have mentioned.
    If you know the transaction no. you can directly open that in transaction CRMD_ORDER. The other opetion is to use the SAP Menu instead of transactions.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.

  • Transaction codes for viewing the registers

    hi,
    sap gurus,
    We have done the utilization for the month of FEB-08.How we can confirm the the registers are updated or not.
    Please give the inputs.Urgent
    regards,
    balaji.t

    Please check the following registers-
    J2I5 - To extract
    J2I6 - To See or Print
    for the tables
    PART 2: J_1IPART2
    for seeing the Utilization entries in Part 2 at the table as follows -
    Excise Group : Your Excise Group
    Transaction Type: Blank
    Execute: system gives the utilized values.

  • Transaction code for checking the capacity of  a job

    Hi,
      Can anybody tell me if there is a transaction code for viewing the capacity of Job.
    Thanks and regards,
    Avinash.S

    Hi Avinash,
    I am not geeting what you want normally CM01 for w/c vise Load you can use.
    Pls elaborate yr problem a little bit.
    Umesh

  • What is the transaction code for where used list

    hi,  
                    what is the transaction code for where used list and
               how to retrieve the previous delivery quantity and quantity delivered for a particular material  with reference to both material document number and material number.

    hi,
    there is no transaction code for where-used-list..
    its one of the buttons in application tool bar which if you click will tell you where,in which program or tables etc this object is used.
    to retrieve the previous delivery quantity and quantity delivered for a particular material with reference to both material document number and material number,
    use tables <b>likp lips and mara</b> and use material number and document number in where condtion.
    regards,
    pankaj singh
    <b>**** please mark all helpful answers</b>

  • To Find transaction code for maintenance view J_1BT001WV

    Hi Gurus,
    I have to find transaction code for maintenance view J_1BT001WV. Plz tell me how can i do it.
    regards
    Rajesh

    Hello Rajesh
    There are no specific transactions defined for this view (except for SM30 ).
    The IMG activities where the view is used are (check OBJSUB ):
    SIMG_ORFB_J_1BT001WV (Assign business place)
    J_1BASSBRANCH (Assign CGC branch to plant)
    In order to find the view in the IMG call transaction SM30, enter the view and push button Customizing.
    The following activites are found on ERP 6.0:
    South Korea: Basic Settings for Value-Added Tax     Assign Business Place
    Business Place (Generic)                                        Assign Business Places to Plants
    Official Document Numbering (Indonesia)                 Assign Business Places to Plants
    Nota Fiscal                             Assign Business Places to Plants
    Official Document Numbering (Thailand)                    Assign Business Places to Plants
    Regards
      Uwe

  • Transaction code to view process orders set for deletion

    Hi PP Gurus
    We are trying to search for transaction code to view the process orders which have status as DLFL i.e deletion flag  set for the orders. In cooispi, the deleted orders are not shown in the report output.
    I request you to let me know if there is any other code through which we can view deleted process orders.
    Thanks & Regards
    Harleen Kaur

    Dear,
    In COOISPI  put DLT in system status field and execute the report this will give you the list of all order with deletion flags
    Also refer this thread,
    COOIS Report for Production orders with status DLFL
    Regards,
    R.Brahmankar
    Edited by: R Brahmankar on May 6, 2009 11:16 AM

  • T-code for cancelled Invoice and cancelled Excise Invoice

    Dear Guru,
    kindly let me know the T-code for cancelled Invoice and cancelled Excise Invoice.
    Wishes,
    Abhishek

    Hi Abhishek,
    I am not aware of any T-code through which you can see the cancelled invoice. I think either you have to go for development (SQVI)
    or
    Extract the list of your all billing document like billing document created from 01.01.2010 to 22.04.2010
    Now go to SE16 --> Table VBFA --> Give your billing document number in field "Preceding Doc." --> and in the field "Subs.doc.categ." --> choose entry "N     Invoice cancellation" --> system will show you all the entries for which cancellation billing document has been created.
    or
    Go to SE16 --> Table VBRK --> enter your billing document list --> In the field "Posting status" --> Choose  option "E      Billing Document Canceled"
    Hope it helps,
    Regards,
    MT

Maybe you are looking for

  • TC File Sharing "With accounts" ability to choose hard drive?

    Hi! I've TC 1 TB, latest model (Early 2009 in Apple terms I suppose). Can I have private folders in EXTERNAL USB drive for accounts? I've created two user accounts via Airport Utility->Disks->Secure Shared Disks: With accounts. User account 1 sees th

  • Can I use Mac Pro as a Mainframe to serve 10 PCs?

    I need to furnish a Mac lab, and I thought if I can use a Mac Pro with 12 core, to serve 10 PCs. Anybody can help me in this issue? Thanks...

  • Pre-programmed voice mail key

    I am trying to modify the pre-programmed voice mail number in my bionic (*86) to include pauses and waits separating various prompt numbers, etc.  I found under voicemail settings where you can perform this mod and it accepts and displays the changes

  • Spawning a new process from a java application

    Hi, Was wondering if there is any way to spawn a new java application (not as a Thread) from a running application? ie, class A and class B are both applications: both have public static void main() methods, and i want class A to spawn a class B appl

  • Apple id confusion between iPhone

    I activated iCloud on my iPhone using my existing Apple ID. On my Mac when I activated it I opted for a new .me email address. When I check my Mac it gives me the Apple ID associated with the .me. When I go into account details it then gives me the o