Transaction F-59 - restriction if amount of payment is higher then total...

Hello,
I need little help with transaction F-59. To explain exactly with what I need help with, I will try to explain it through little example:
For vendor A I have due in amount of total 40.000 USD and I plan to pay this amount in three partial payments in one month:
I payment - 20.000 USD
II payment - 5.000 USD
III payment u2013 10.000 USD
And I enter all this partial payments without any problems but if for example on III payment I enter 11.000 USD instead amount of 10.000 USD there is no warning message which says something like "You can't pay 11.000 (more than you own ), you should enter 10.000 USD or less."
Way it is now, if i enter these 11.000 USD instead of 10.000 USD there isn't any warning message so it happens sometimes that I pay vendor more then I own him. I need help how to change this so there should be some limitation where I can't pay to my vendor more than I own him.
Any help is appreciated and thanks in advance for prompt replys.
Cheers;)

Hi
It is not possible in std SAP. You can try one of these user exits
Enhancement
RFFOX074 Frame for user exit RFFOX074 (in program RFFOCH_U)
RFFOX075 Frame for user exit RFFOX075 (in program RFFOCH_U)
RFFOX081 Frame for user exit RFFOX081 (in program RFFOF__T)
RFFOX082 Frame for user exit RFFOX082 (in program RFFOF__T)
RFFOX100 Frame for user exit RFFOX100 (in program RFFOUS_T)
RFFOX101 Frame for user exit RFFOX101 (in program RFFOUS_T)
RFFOX102 Frame for user exit RFFOX102 (in program RFFOUS_T)
RFFOX103 Frame for user exit RFFOX103 (in program RFFOUS_T)
RFFOX104 user exit
RFFOX105 Frame for user exit RFFOX105 (in program RFFOUS_T)
RFFOX200 Frame for user exit RFFOX200 (in program RFFONZ_T)
RFFOX210 Frame for user exit RFFOX210 (in program RFFOAU_T)
RFFOX211 Frame for user exit RFFOX211 (in program RFFONZ_T)
RFFOX230 General program for user exit RFFOX230 (in program RFFOJP_L)
RFFOX240 Enhancement for User Exit 240 (RFFOAT_P)
RFFOX250 Enhancement for User Exit 250 (RFFODK_E)
RFFOX901 Framework for user exit RFFOX901 (in program RFFOM100)
RFFOX902 Framework for user exit RFFOX902 (in program RFFOM100)
FDTAX001 Enhancement to Transaction FDTA (event after the download)
FEDI0002 Function exits for EDI DOCS in FI - Incoming pyt adv.notes
FEDI0003 Function exits for EDI docs in FI - Save PEXR segments
FEDI0004 Function exits for EDI docs in FI - particular events
FEDI0006 Function Exits for EDI-docs in FI: Save IDCR Segments
RFFOX003 Frame for user exit RFFOX003 (in program RFFOM100)
RFFOX041 Framework for user exit RFFOX041 (in program RFFOBE_I)
RFFOX042 Framework for user exit RFFOX042 (in program RFFOBE_E)
RFFOX043 Framework for user exit RFFOX043 (in program RFFOBE_D)
RFFOX061 Frame for user exit RFFOX061 (in program RFFOCH_P)
RFFOX062 Frame for user exit RFFOX062 (in program RFFOCH_P)
RFFOX063 Frame for user exit RFFOX063 (in program RFFOCH_P)
RFFOX064 Frame for user exit RFFOX064 (in program RFFOCH_P)
RFFOX065 Frame for user exit RFFOX065 (in program RFFOCH_P)
RFFOX066 Frame for user exit RFFOX066 (in program RFFOCH_P)
RFFOX071 Frame for user exit RFFOX071 (in program RFFOCH_U)
RFFOX072 Frame for user exit RFFOX072 (in program RFFOCH_U)
RFFOX073 Frame for user exit RFFOX073 (in program RFFOCH_U)
Business Add-in
FI_BSTM_MC_EXIT FI Account Statement: Exit from MultiCash Conversion
FI_F110_SCHEDULE_JOB F110: Check before scheduling a proposal/update run
Regards
Sanil

Similar Messages

  • F110 - Exclude / Include vendors based on payment Amount in payment run

    I have a requirement to make a vendor to appear in the exception list if the payment amount for the vendor (invoices are grouped together for payment) exceeds a certain limit. Can anyone explain me how can achieve this?
    Eg:
    Vendor A has 2 invoices of $1000 each which is due for payment
    Vendor B has 5 invoices of $1000 each which is due for payment
    Both vendor need to be paid using payment method A
    The requirement is all vendors payments which exceeds $3000 must appear in the exception list.
    That is for the above case if I execute the F110 proposal ran then Vendor A should be selected for payment and Vendor B should appear in the exception list.
    Can this be achieved? Any suggestions?
    I have managed to do the selection other way around (Making Vendor B selecting for payment and Vendor A appearing in the exception) by providing the minimum amount in payment method A configuration for specific company code. But that is not my requirement.

    Hello,
    why don't you try the Maximum amount instead?
    Doesn't this cover your requirement?
    Be careful, however, if the payment method is specified on the document and not derived automatically from the vendor master, then this will not work.
    In this case, you could use a validation based on the payment amount.
    kind regards,
    George

  • How can I to restrict the amount of messages in XI 3.0 ?

    Hi @all,
    in our company we use sap xi 3.0. Actually, we research a method to restrict huge amount of messages that we process in the integration server (IS). Is there any possibility to restrict the amount of messages int the IS? (e.g.  a parameter (sxmb_adm) which define the maximum messages to process per hour or day..if the maximum is reached than the IS blocked ensuring message requests for a while..)
    Best regards
    Alex

    Hi @all,
    thanks for your replies.
    @Rajesh
    to use message packaging for improve system performance is an interest possibility. I've just read an implement guide from Daniel Horacio.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c?quicklink=index&overridelayout=true
    But it seems there is no option for  early version sap xi 3.0. Is it possible to use package messaging on xi 3.0 ?
    Best regards
    Alex

  • Oralce AP :check order to be ordered by amount in payment batch?

    Is it possible to set the check order to be ordered by amount in payment batch?
    The only options available now are supplier name, supplier number, or postal code(Document Order) but I want to print by batch amount.
    Please advise.
    Lak

    Hi
    There are options for first due date, last due date, terms etc, but matching with highest available invoice number is not an option as far as I know.
    Never tried but as an idea if I had this question...I could try this...
    1. Create receipts by automatic receipts creation....
    2. Run a custom program to re-arrange applications and amounts (use ar_receipt_api_pub for adjustments)
    3. Then Approve/Confirm etc.
    Emphasizing again, never tried such thing.
    Regards
    Bilal SARIOZ

  • Unable to enter a negative amount for payment

    I am trying to enter a negative amount for payments under order items, but I keep getting this error message:
    "The minimum accepted payment amount for 'Financing' is '0'. Please enter an amount greater than '0' to continue.(SBL-SFS-00167)".
    The payment method & type I'm using here is "Financing" & "CareCredit". But, when I enter the payment method & type as "Credit Card" & "Visa", I can enter a negative amount without any errors.
    I think this requires some configuration to override. Can anyone help me with this issue?
    Thanks,
    Raghu

    Hi,
    It's known bug.
    Bug number is 10499290.
    Visit/contact oracle support for more information.
    Good luck
    T.Abed

  • When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on running javascript

    When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on executing javascript and raising errors.

    What are the error messages you are seeing?

  • MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

    MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

    I Have the same problem, I switched off location services, maps in data, whatever else maps could be involved in nd then just last nite it chewed 100mb... I'm also on vodacom so I'm seeing a pattern here somehow. Siri was switched on however so I switched it off now nd will see what happens. but I'm gonna go into both apple and vodacom this afternoon because this must be sorted out its a serious issue we have on our hands and some uproar needs to be made against those responsible!

  • FB05 Batch Input / Call Transaction - Does not select amount for payment

    Hi,
    When I launch the FBWD transaction (returned bills of exchange), the call transaction for G/L account postings is in error. So the FBWD automatically creates a batch input, but when I tried to launch the batch input, it remains unsuccessful.
    So I launched the BI in foreground, I can see that the first steps of the account postings are OK, but the BI stops when assigning the payment amounts : the BI found the different postings to clear, but it waits to enter the payment amount.
    Manually, I just have to click on 'Accept' or enter the payment amount and click on 'Continue'.
    => Is there anything to do so that there is no payment amount to fill? (there should be something because the FBWD is a standard transaction, so it should work!!)
    Can you help me on this?
    Thx

    Hi.
    Yes the issue has been resolved.
    You just have to configure your master record (FS00) by ticking the box 'relevant to cash flow' (XGKON).
    Hope it will help you.
    Bernard.

  • Open items query in BW (restriction on amount)

    Hi all,
    from the open items report on FI-CA (transaction FPO4) it is possible to select based on the amount related to the balance at BP, CA... level.
    Does anybody know how to do the same with the query of open items from BW (0FC_C07_Q0001)?
    Example: We want to restrict only the open items for CA with a due amount grosser than 125 euros.
    Thanks!,
    Montserrat

    Solved

  • Changing Withholding tax base amount- 1099 payment

    The scenario is:
    Classic withholding tax functionality to be used for first time, the configuration was done last year.
    1099 needs to be printed with all payments made out to the vendor.
    There were payments made out to the Vendor in year 2011. There are some payments that show as WT exempt amount  in RC and other payments are displayed as WT base amount in RC while running RFIDYYWT or 1099 print out report.
    I used RFWT0020 program to regenerate the WT and Change to source tax code. It just updates the tax code on the payment document but is not changing the payment document amount from WT exempt to WTax base.
    So the 1099 printout is not showing the total payments made, it is excluding WT exempt amount in total.
    Any suggestions?
    Thanks
    Edited by: Gary_S321 on Jan 11, 2012 10:30 PM

    Rebecca,
    You need to update the WTax base amount field on all the payment documents that are blank.
    For that just go to Vendor line item report FBL1n and run it for all the 1099 vendors. Change the layput to add WT base amount and WT Code in the report output. Filter the documennt type with payment doc types ZP and KZ and WTax base amount zero.
    Extract these transactions into excel and then write LSMW to mass update these tax base amount field.
    To update only Tax code on these transaction you can use RFWT0020 program.
    Hope this helps.
    Thanks

  • Dealing with negative amounts in payment proposal runs in f110

    Hi Techies,
    In the payment proposal run through f110 transaction is it possible to raise an exception and show the negative amounts seperately?

    Dear Ashok,
    The scenario is that during the payment proposal run,
    if there are two amounts with different due dates, say
    10.07.2008     8900 euros to pay
    20.07.2008     -800 euros ( the total of the documents at this due date is minus than zero)
    Now the program gives one record which says 8100 euros to pay.
    But our requirement is that, insted of displaying a single record that adds up the amounts, the negative amount is to be shown seperately like this:
    Due date      10.07.2008     8900        euros to pay
    Due date     20.07.2008      -800     Exceptions
    As this is a standard SAP functiionality, i would like to know any possible ways to achieve this requirement.
    Regards,
    Madhuri

  • Restriction on amount on Open items query (FI-CA)

    Hello,
    we are trying to implement the queries 0FC_C07_Q0001 and 0FC_C07_Q0002 for reporting on open and cleared items from FI-CA to BW.
    From the open items report on FI-CA (transaction FPO4) it is possible to select based on the amount, and also to relate this balance at BP, CA... level.
    From BW team they say it is not possible to do the same with the open items queries in BW. They say the amount is not even available as a parameter. Is it like this? Can't we select only the open items for CA with more than a specific amount?
    Many thanks in advance,
    Montserrat

    Hi,
    It is possible if you are using conditions, like if the reqt is to show amounts greater than X (entered by user), then a Condition can be created on the amount key figure and use the condition type Greater Than and supply a variable which will be used by the user during run time. See here for full details:
    http://help.sap.com/saphelp_nw04/helpdata/en/73/702e39074dc93de10000000a114084/content.htm
    Hope this helps...

  • Restricting Purchase order's payment terms change authorization

    Hi,
    While changing the PO payment terms, system does not reset the release strategy of the released PO. Is there any way we can restrict to PO change with Payment terms change authorizations?
    Regards,
    Sattuj

    Hi,
    Then make the release indicator as 1 then you cannot change any thing first you have to unrelease and then make the required change and then release the same
    regards

  • Vendor master - restricting posting and allowing payment run

    Hi,
    We have a list of Vendors which needs to be deleted.
    Our requirement is that we have certain Vendors who have open items, so our requirement to restrict further postings to the Vendor but allow the open items for Payment run.
    Is there a possibility in SAP for such facility?
    Thanks in advance.
    Regards,
    Srinivas

    Hi,
    Good morning and greetings,
    There is an option to achieve your requirement without blocking the vendor.
    Step No.1 : Establish a purchasing block for the vendor and that would mean no purchases can be made from the vendor and in turn no open items. Please go through the following link for more understanding.
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/53/c9866eca3711d2b494006094b9114a/frameset.htm
    Step No.2 : There are chances that user can still use FB60 to create invoice for vendor...to control that, create a validation rule in OB28 stating that no entry can be posted for the vendor code...if it is going to be for a set of vendors then create a set ID using GS01 for those set of vendors and call the set ID in OB28...This step would arrest the open item being created for the vendor.
    In this way, the vendor master would be still open for making payments for the existing open items, but no new open items would come for the vendor.
    Once the open items are cleared, delete the vendor once and for all.
    I am sure this would meet your requirement.
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • EBS Clearing Error - Citibank rounding amount in payment

    Hi All
    I am facing error in EBS Implementation using BAI2 file given by Citibank India.
    Information about Vendor payment ( 497,414.61 INR in ZP document ) is sent to Citibank by a file. Citibank is rounding off amount and makes payment of 497,415.00 INR.
    In BAI2 File sent by Citibank, hence amount is 497,415 INR. EBS while clearing gl account of ZP document,  there is a difference in amount. And hence EBS program fails to post and clear.
    Can you please suggest a solution ? Business is ready to post difference amount to a "Bank Service charge" gl account. Can we use "Tolerance Group" configuration to achieve this ?
    -Regards
    Kapil

    Hi
    We dig this further and found SAP DME Configuration had setting to round off amount. Hence F110 generated payments file caused rounding but not citibank.
    I tried setting tolerance configuration but continue to receive "difference is too large for clearing error".
    I am also considering option of updating DME Config so that payments file has 2 decimal places, but bank is asking that decimal point "." should be present as separator in amount.  When I tried this, it caused issues in DME file.
    -Regards
    Kapil

Maybe you are looking for