Transaction for displaying transactions that an user is authourized to use

hi
my user wants a transaction with which he can see all the transactions that he is authorized to do.is there any such?

I use
S_BCE_68001426

Similar Messages

How to display records that match user input date

hi all,
i need to display records that match user input date (i.e., for example if the difference between user input date and record date is less than 5 years then display those records) , this is for hr bw. any exit is there to check for validation for records to be displayed based on some abap coding.
vijay

I just see getApplication method but "Retrieves a list of all the deployed applications."
My scenario is: I get user, end i want to discorver how application this user i enable to see.

Need advice for an application that restricts access to other applications using a smart card

Hello everybody,
I am developing a system that uses a smart card reader attached to a USB port of a PC.
What the system should provide is:
When computer boots up and shows the users login screen, a user, previously registered, can use his smart card to access the system, instead of entering his password
Once the user is logged in, when he tries to launch an application, which has previously marked as "secured", a dialog box is shown indicating that the user has to present his smart card. If the smart card has access to the application, the application
is launched, otherwise an error message is shown to the user and the application is not executed.
I develop in C++ and C#. I have already created a library (in Visual C++) that manages the smart card reader and provides the card presented to it.
Now I am developing the applicastion (in C#) that will configure the security (assigning cards to users and applications).
Concerning this, I have 2 questions regarding each point above:
Is it possible to create the centralized application that lists all users and allows to assign cards to them? Then, when the users login screen is shown, the system must access that data before logging in, so that it can check which card was presented and
what user it corresponds to. I have seen in laptops, that have embedded fingerprint readers, a user must login to his account first and then he can register his fingerprints. In fact, what I need to do is something similar but with smart card reader instead
of fingerprint reader. So, perhaps, user must login into his account first and then he will be able to add his card and store that information somewhere (in windows registry maybe).
How can I launch my application when other application is executed but before its interface is actually shown? this is similar to what antivirus programs do, because they check the executable before it is actually ran. What is the best method to address
the application? by executable file name? process name? or other? if the best is by process name, how can I know the process name without actually running the application?
Well, that is all what I need to do. Please advice regarding this subject.
I look forward to hearing from you,
Best regards,
Jaime
Powered by C++

> what was the guidance?
1. Research other software that does similar things (not just exactly the same) as you need. If you like something in their solutions, copy it :)
The only software I know that does that is an antivirus, but I am unlucky to find some code in c++ that allows to intercept the program execution before actually executing it.
2. If a kernel driver would fit in your solution, go for it (google for what is available for free, or find a consultant to write it for you).
There are a lot of information about kernel drivers, but the question is, is that really the solution?
Otherwise, you can just hide the application from user's reach and substitute the executable in shortcuts, etc. to run your program instead.
Definetly this is not the way to go
What is the best method to address the application? by executable file name? process name? or other?
By executable file name, like in the Windows Applocker, I think. Processes do not have names (they are artifact of Task manager and debugging tools, to represent the processes for user somehow). Or, only by the filename part of the full path.
I agree with that
if the best is by process name, how can I know the process name without actually running the application?
When the user runs the application, the driver will detect this and do its magic.
I have found this page: http://stackoverflow.com/questions/3556048/how-to-detect-win32-process-creation-termination-in-c. They mention WMI, but I will study it tommorow... it is so late for today :-)
Regards,
-- pa
Regards
Jaime
Powered by C++

My sons iPhone 5 was hacked into now I can't unlock the screen to restore it apple store says there is nothing they could do about it so I paid for a phone that I basically can no longer use

My sons iPhone 5 was apparently hacked into now he is unable to unlock his screen to restore his phone apple store says they can't do anything about it I find it hard to believe I paid $499 for a phone that we cannot use

iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
Kina67 wrote:
My sons iPhone 5 was apparently hacked ..
Unauthorized modification of iOS
http://support.apple.com/kb/HT3743

How to view all transactions that all users have access with in a year.

Hello
Does anyone know if they is a report that shows all users and the transactions they have used within a year? I have tried STAT3 and STAD and also SM20 however this does not give me all the users and their transactions used.
I would be greatful if anyone can please help.
Thank you
Regards
Bindi

In SUIM you will not find this data. Explore ST03N.
Edited : I doubt whether it will give you a year dat or not. Default logging is last 3 months including current month. The best way to do this is to create Z table to log all data during a year.
Regards,
Arpan Paik
Edited by: P Arpan on Jan 19, 2011 5:59 PM

Display "light" that shows user in specifc CSQ for high call volumes

Hello - I am using UCCX 8.5 and have a design that if calls sits in their incoming queues too long (time varies with which CSQ), the call will go into the "Escalation" CSQ which will be serviced first before any other CSQ.
Currently I am using the workflow setup in the supervisor to send an e-mail if there are more than three calls in this queue. The director of our customer service is wondering if a flashing light or something like that can be set up so it is more visible to staff members. Does such a thing exist?
I know you set up a large monitor with the supervisor graphs and that is ok, but she is looking for something you can sight of out of the corner of your eye.
Thanks!
/alan

Alan,
I don't believe there is anything specific in 8.5 that allows you do what you are asking. However, there are many 'wallboard' products out there that can solve this issue.
-Steven
Please help us make the communities better. Rate helpful posts!

How to Display applications that the user is enabled (java)

Any idea?
I read java api document but i can't find any soluction!
Tanks for replay!

I just see getApplication method but "Retrieves a list of all the deployed applications."
My scenario is: I get user, end i want to discorver how application this user i enable to see.

Industry sector field for display only.

Dear All,
Does anybody know the setting to make Industry sector for display only, so that the enduser cannot change industry sector while creating material.
I know to hide industry sector from DEFAULTS menu, but i need to freeze that field for display only.
Regards
Rang

Hello Ranganath,
You can use transaction exit. for more information check this thread.
Industry sector (MBRSH) field in display mode.
Hope this helps.
Regards
Arif Mansuri

'Preparing Video for Display' causing render problems

I have a DV-Pal sequence, with a few crops, burn effects and transition, so I've got a lock and render everything, but every time I do about 3 mins later a dialogue box pops up stating 'Preparing Video for Display' with a little percentage bar. Once it's 'Prepared Video for Display' (whatever that means??) all my rendered effects revert back to an unrendered state.
Has this happened to anyone else and how can I stop it?
Much Thanks, Matt

Quit Final Cut Pro. Go to your Render Files folder and trash the contents of the sub-folder there that has the same name as your project.
Next step:
Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up. If you have further problems, the backup can be recalled and you can continue working.
Re-open your project and render again.

My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?

My wife and I each have our own apple ID's which we use on our own iPhones and iPads. We share an iMac. Is there a way of enabling Facetime on the iMac to accept calls to either of our IDs without the need to login as that particular user?

no, when using facetime you log in with the apple id you want people to reach you at, so unless you both agree to share one apple id for all the facetime you do, it will be necessary for you to logout and login each time you use the application.

App that monitores user's all day activities

I am looking for an app that monitores user's all day activities. That means one that makes it possible to analyse user's activities during the day with his/her mobile like using the camera, mp3 player, calls, sms, games, etc. Any recommendations?

s5nischw wrote:
Thanks for your fast answer! So there is not even something similar to the android's"phone beagle" app?!
No. As provided, on a "stock" iPhone, all apps are "sandboxed", thus they don't have the access necessary to provide this type of data. If you want to get the ability to do what you want, you have no choice but to jailbreak. However, doing that introduces problems of its own...one of them being the real possibility of never being able to install a stock firmware on the phone, not to mention the voiding of all warranty & support from Apple.

User cannot log in using Opendirectory password but can log in using Crypt

Hi,
We have an Xsan environment with Opendirectory authentication. Most of the users are created in Workgroup manager and home folders are stored on an Xsan volume.
We have noticed (this has happened to two users recently) that sometimes user cannot log in using his password stored in Opendirectory Password server. This is permanent to some specific User/Workstation combination. Other users can log in to the same workstation and this user can log in to other workstations.
Also, if I change password type to Crypt in Workgroup manager, user can log in to this workstation. In past this happened to another user/workstation combination.
I tried to create a new Opendirectory password (password ID has changed in WM), with no success.
Any ideas?
Thanks,
Darius

You say you can log in the web browser right? You can find your username in the following url: https://play.spotify.com/user

TO FIND THAT ONE USER HAS HOW MANY TRANSACTION AUTORIZATION

Guru's
I hav to develop a report which states that one user has how many Transaction authorization.
Could u suggest wht steps to be followed.
Or if sum starndard report is available or not.
Eg.
Amam
has MM01,MM02,XK01,XK02.
I need to display as output
amman MM01 MM02 XK01 XK02
& ALSO TELL DURING THIS YEAR HAS HE USED ALL TRANSACTION OR NOT.
Thanks in advance.
Vibhuti

Hey vibhuti,
Go to TCode - SU01.
U'll find all the details.
Reward pts if useful!

Hi guys please give me sample code for call transaction that handles error

hi guys, please give me sample code for call transaction that handles error,
please send me the sample code in which there should be all decleration part and everything, based on the sample code i will develop my code.
please do help me as it is urgent.
thanks and regards.
prasadnn.

Hi Prasad,
Check this code.
Source Code for BDC using Call Transaction
*Code used to create BDC
*& Report ZBDC_EXAMPLE                                                *
*& Example BDC program, which updates net price of item 00010 of a     *
*& particular Purchase order(EBELN).                                   *
REPORT ZBDC_EXAMPLE NO STANDARD PAGE HEADING
                      LINE-SIZE 132.
Data declaration
TABLES: ekko, ekpo.
TYPES: BEGIN OF t_ekko,
    ebeln TYPE ekko-ebeln,
    waers TYPE ekko-waers,
    netpr TYPE ekpo-netpr,
    err_msg(73) TYPE c,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko,
      it_error TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_error TYPE t_ekko,
      it_success TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_success TYPE t_ekko.
DATA: w_textout            LIKE t100-text.
DATA: gd_update TYPE i,
      gd_lines TYPE i.
*Used to store BDC data
DATA: BEGIN OF bdc_tab OCCURS 0.
        INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
*Used to stores error information from CALL TRANSACTION Function Module
DATA: BEGIN OF messtab OCCURS 0.
        INCLUDE STRUCTURE bdcmsgcoll.
DATA: END OF messtab.
*Screen declaration
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME
                                    TITLE text-001. "Purchase order Num
SELECT-OPTIONS: so_ebeln FOR ekko-ebeln OBLIGATORY.
SELECTION-SCREEN END OF BLOCK block1.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME
                                    TITLE text-002. "New NETPR value
PARAMETERS: p_newpr(14)   TYPE c obligatory. "LIKE ekpo-netpr.
SELECTION-SCREEN END OF BLOCK block2.
*START-OF-SELECTION
START-OF-SELECTION.
Retrieve data from Purchase order table(EKKO)
SELECT ekkoebeln ekkowaers ekpo~netpr
    INTO TABLE it_ekko
    FROM ekko AS ekko INNER JOIN ekpo AS ekpo
      ON ekpoebeln EQ ekkoebeln
   WHERE ekko~ebeln IN so_ebeln AND
         ekpo~ebelp EQ '10'.
*END-OF-SELECTION
END-OF-SELECTION.
Check data has been retrieved ready for processing
DESCRIBE TABLE it_ekko LINES gd_lines.
IF gd_lines LE 0.
Display message if no data has been retrieved
    MESSAGE i003(zp) WITH 'No Records Found'(001).
    LEAVE TO SCREEN 0.
ELSE.
Update Customer master data (instalment text)
    LOOP AT it_ekko INTO wa_ekko.
      PERFORM bdc_update.
    ENDLOOP.
Display message confirming number of records updated
    IF gd_update GT 1.
      MESSAGE i003(zp) WITH gd_update 'Records updated'(002).
    ELSE.
      MESSAGE i003(zp) WITH gd_update 'Record updated'(003).
    ENDIF.
Display Success Report
Check Success table
    DESCRIBE TABLE it_success LINES gd_lines.
    IF gd_lines GT 0.
    Display result report column headings
      PERFORM display_column_headings.
    Display result report
      PERFORM display_report.
    ENDIF.
Display Error Report
Check errors table
    DESCRIBE TABLE it_error LINES gd_lines.
If errors exist then display errors report
    IF gd_lines GT 0.
    Display errors report
      PERFORM display_error_headings.
      PERFORM display_error_report.
    ENDIF.
ENDIF.
*&      Form DISPLAY_COLUMN_HEADINGS
      Display column headings
FORM display_column_headings.
WRITE:2 ' Success Report '(014) COLOR COL_POSITIVE.
SKIP.
WRITE:2 'The following records updated successfully:'(013).
WRITE:/ sy-uline(42).
FORMAT COLOR COL_HEADING.
WRITE:/      sy-vline,
          (10) 'Purchase Order'(004), sy-vline,
          (11) 'Old Netpr'(005), sy-vline,
          (11) 'New Netpr'(006), sy-vline.
WRITE:/ sy-uline(42).
ENDFORM.                    " DISPLAY_COLUMN_HEADINGS
*&      Form BDC_UPDATE
      Populate BDC table and call transaction ME22
FORM bdc_update.
PERFORM dynpro USING:
      'X'   'SAPMM06E'        '0105',
      ' '   'BDC_CURSOR'      'RM06E-BSTNR',
      ' '   'RM06E-BSTNR'     wa_ekko-ebeln,
      ' '   'BDC_OKCODE'      '/00',                      "OK code
      'X'   'SAPMM06E'        '0120',
      ' '   'BDC_CURSOR'      'EKPO-NETPR(01)',
      ' '   'EKPO-NETPR(01)' p_newpr,
      ' '   'BDC_OKCODE'      '=BU'.                      "OK code
Call transaction to update customer instalment text
CALL TRANSACTION 'ME22' USING bdc_tab MODE 'N' UPDATE 'S'
         MESSAGES INTO messtab.
Check if update was succesful
IF sy-subrc EQ 0.
    ADD 1 TO gd_update.
    APPEND wa_ekko TO it_success.
ELSE.
Retrieve error messages displayed during BDC update
    LOOP AT messtab WHERE msgtyp = 'E'.
    Builds actual message based on info returned from Call transaction
      CALL FUNCTION 'MESSAGE_TEXT_BUILD'
           EXPORTING
                msgid               = messtab-msgid
                msgnr               = messtab-msgnr
                msgv1               = messtab-msgv1
                msgv2               = messtab-msgv2
                msgv3               = messtab-msgv3
                msgv4               = messtab-msgv4
           IMPORTING
                message_text_output = w_textout.
    ENDLOOP.
Build error table ready for output
    wa_error = wa_ekko.
    wa_error-err_msg = w_textout.
    APPEND wa_error TO it_error.
    CLEAR: wa_error.
ENDIF.
Clear bdc date table
CLEAR: bdc_tab.
REFRESH: bdc_tab.
ENDFORM.                    " BDC_UPDATE
      FORM DYNPRO                                                   *
      stores values to bdc table                                    *
--> DYNBEGIN                                                      *
--> NAME                                                          *
--> VALUE                                                         *
FORM dynpro USING    dynbegin name value.
IF dynbegin = 'X'.
    CLEAR bdc_tab.
    MOVE: name TO bdc_tab-program,
           value TO bdc_tab-dynpro,
           'X' TO bdc_tab-dynbegin.
    APPEND bdc_tab.
ELSE.
    CLEAR bdc_tab.
    MOVE: name TO bdc_tab-fnam,
           value TO bdc_tab-fval.
    APPEND bdc_tab.
ENDIF.
ENDFORM.                               " DYNPRO
*&      Form DISPLAY_REPORT
      Display Report
FORM display_report.
FORMAT COLOR COL_NORMAL.
Loop at data table
LOOP AT it_success INTO wa_success.
    WRITE:/      sy-vline,
            (10) wa_success-ebeln, sy-vline,
            (11) wa_success-netpr CURRENCY wa_success-waers, sy-vline,
            (11) p_newpr, sy-vline.
    CLEAR: wa_success.
ENDLOOP.
WRITE:/ sy-uline(42).
REFRESH: it_success.
FORMAT COLOR COL_BACKGROUND.
ENDFORM.                    " DISPLAY_REPORT
*&      Form DISPLAY_ERROR_REPORT
      Display error report data
FORM display_error_report.
LOOP AT it_error INTO wa_error.
    WRITE:/      sy-vline,
            (10) wa_error-ebeln, sy-vline,
            (11) wa_error-netpr CURRENCY wa_error-waers, sy-vline,
            (73) wa_error-err_msg, sy-vline.
ENDLOOP.
WRITE:/ sy-uline(104).
REFRESH: it_error.
ENDFORM.                    " DISPLAY_ERROR_REPORT
*&      Form DISPLAY_ERROR_HEADINGS
      Display error report headings
FORM display_error_headings.
SKIP.
WRITE:2 ' Error Report '(007) COLOR COL_NEGATIVE.
SKIP.
WRITE:2 'The following records failed during update:'(008).
WRITE:/ sy-uline(104).
FORMAT COLOR COL_HEADING.
WRITE:/      sy-vline,
          (10) 'Purchase Order'(009), sy-vline,
          (11) 'Netpr'(010), sy-vline,
          (73) 'Error Message'(012), sy-vline.
WRITE:/ sy-uline(104).
FORMAT COLOR COL_NORMAL.
ENDFORM.                    " DISPLAY_ERROR_HEADINGS
Hope this resolves your query.
Reward all the helpful answers.
Regards

How to customize SAPlogon so that the user cannot enter transaction code?

I use PFCG to create a role which limit the choices of menu. I create a user and set the role to the user.
I would like to disable or hide the COmmand Field so that the user cannot enter transaction code directly.
Is it possible to do so?
If yes, would anyone show me how?
Any discussion is welcome.

anyway you are going to restrict the user authorization vai role, insted of going throught the whole tree to execute the tcode there is shotcut as command line. here you can save much more time for the user insted going through the tree always. there is no harm for the system if you keep the command line option. What and why you think it should be disabled?
Cheers,
-Sunil

Transaction for displaying transactions that an user is authourized to use

Similar Messages

Maybe you are looking for