Transaction for overview of all custom (Z) programs in ERP.

Dear gurus,
I am looking for a transaction/report which gives me an overview of all custom programs/elements build in a system. I used to know this transaction but I cannot find it anymore (searched throughout Google and SDN ).
Can anyone help me out?
Thanks in advance!
Rob
PS the overview is needed to show a customer an overview of all used Z-elements in their system (and I do not want to use TADIR or SE93 ).

Hi Sandra,
Unfortunately this is not the one. It was a transaction which provided me some input options and which I then could run and which gave me an overview on all Z-elements in the system. A fantastic report! I hope someone can help me out with this report/trx.
Thanks!
Rob

Similar Messages

Find out all custom concurrent program

Hi experts,
I am looking for the query that can bring me all custom concurrent programs. We did not follow the naming convention so that It is so difficult the find find out all custom concurrent programs. If you have that sql, please kindly share with me.
Thanks in advance.
HL

That is another question, probably the question was asking the custom tables, and I found out almost custom tables. Now, I am asking about custom concurrent programs. If I base on creation_date, it seems to me that I can get 60%-70% of custom concurrent programs. But I need all custom concurrent programs. Do you have the query that can list all standard current programs. Then I can exclude them on my list and I can get the expected result.The same way you got the list of custom table you can use to get the list of custom concurrent programs.
You can query the same tables/views and get the list of seeded concurrent programs (CREATED_BY in (-1, 0, 1, 2)). Please pay attention to the custom concurrent programs which were created by any of those users (ANONYMOUS, SYSADMIN, AUTOINSTAL, INITIAL_SETUP).
Thanks,
Hussein

I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

I installed Adobe Web and Design Preium CS6 on windows 8.1, but when I open the program the size of the menus and tools are so tiny. It is not like that for Acrobat, but all the other programs. Is there a fix for this?

Thanks for the help. I installed CC and it fixed everything but Photoshop. I guess I will have to use my old laptop for images until Adobe fixes the problem. Do you know of a place where we can send issues like these to Adobe?

Transaction for triggering of form through print program for FI

Hi,
I went in table T001F. Now I see couple of programs and forms asscoaited with it.
Now lets say program RFKQST20 and associated form is F_RFKQST20_CO_02. Now how do I know what transaction I can test the triggering i.e printing of this form thorugh its print program ?

Mostly in FI the print programs themself are driver programs for printing outputs. You can directly execute print programs such as RFKQST20 to issue outputs. If you want to find out trnsaction associated, do a where used for trnsactions and find out.
Thanks,
Shashi Reddy

Transaction for overview of Queries published in Roles via Query designer

Hi Guru's,
in Query designer I have the possibility to publish Queries in roles.
I have the problem that some Queries have been published twice or more in different folders, so I want to clean it. But I don't know how to delete the Queries via BEx Analyzer as they are there again as soon as I log in again.
Isn't there any transaction in Backend that I can use to structure my Queries in roles?
Thanks in advance!

One way to delete unneeded duplicates....
Go to Query designer, in development
Instead of loading the query you want to delete, find it in the folder/role
Click on the "Trash Can" icon
Then we have 2 more options to consider....
- Delete object ...will TOTALLY delete it in the development system.... caution with this one, unless you really do want it to permanently go-away.
- Delete only the object reference from the Role/Favorites... will delete the one instance in the folder, but leaves it everywhere else, useful when deleting a duplicate report in the folder
After choosing one of the 2 options above, then click on the 'continue' button.
"Refresh" to check what was done in development = Menu / Refresh
When done... transport the role to Q and Production.
Similar process if the query is located inside of web template and there are multiple instances of the same web template in the roles/folders that need to be cleaned up in the web application designer.

Query on Config for a tax exempt customer

Hi,
In OVK3 (change View customer taxes) MWSI is defined in tax category.
Tax category in customer master sales area data is MWSI.
In FTXP, condition type MWSI is not defined.
Should i add MWSI in FTXP?
If yes, how will i configure it.
If i have added this condition type, will i be able to process transaction for a tax exempt customer?
Thank you so much and best regards.
Rachelle

Dear Rachelle
No need. Just go to FTXP, input country of origin, tax code and maintain only the following:-
Acct Key::::Tax %:::::::Cond.Type
EX2:::::::::::100.00:::::::::JMOD
CES:::::::::::2.000::::::::::JECS
SEC:::::::::::1.000::::::::::JA1X
Save the FTXP. Now go to VK11, input UTXJ and maintain the above tax code and save. Create a sale order and see how it works.
thanks
G. Lakshmipathi

Error while entering transaction for a new customer in release 12.1.1

Hi,
I created a new customer in receivables (am using the version 12.1.1)
First i got an error while creating the customer saying, "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively"
I corrected the profile class amounts and now am allowed to create the customer but now the error comes while entering a transaction for this new customer:
"The system cannot determine geographical information for this location and cannot derive a tax jurisdiction. Please contact your system administrator"
please suggest a solution.
regards,
Shilpa

I faced the same problem, Doc ID 420194.1 solved the problem. Shilpa kindly post the solutions moving forward so the users can benefit from it. Thank you!
Solution
run Geography Reference Program with parameter "Country code" for all records.
Navigate to Trading Community Manager ->
Requests -> Run
Select "Geography Name Referencing" program
Processing for Table : HZ_LOCATIONS and Run Type : ALL
Parameters: Country Code :US
Usage Code :ALL
From Location Id :NULL: To Location Id:NULL
Start Date :NULL: End Date:NULL
Number of workers:1
Total number of Processed Locations:9
Number of Successfully Processed Locations:9
Number of Locations in Error:0

ABAP Program or transaction for hard workload testing

Hello ABAPers,
in my actual client we have the need of creating an error of memory overflow or Database workload overflow.
I think I once saw an standar program that replicates this kind of overflows. But I can´t remember or find this program.
May be it´s all my imagination, but I´m pretty sure there was a program/transaction/function module that could help me with this issue.
If anybody knows of anything about this, please answer this post.
Thank you very much and kind regards
Ibai Ramirez

Hi,
I will not recommanded to increase the size. If your using the ECC 6.0 it allow default size upto 4GB and before that upto 2 GB.
You can check it with using the transaction ST22 for dump analysis and observe the program name and check it is standard program or customer program ( i.e. Start from y or z ). if it standard program then write to SAP and if it is customer program it read more data then read the data in batches, process data and after processing unwanted internal table you have to refresh.
For analysis of the program you can used SE30 - Program runtime analysis, ST05-SQL analysis, ST12-Perticular transaction analysis and STAD.

Secure custom developer programs and transactions

Hi Guys,
I am given a task in my company to maintain authority check for all costom developed programs and transaction.
In combination TADIR, TRDIR & TSTC i found more then 1000 transactions and 1500 programs custom developed.
So now I am having difficulty in finding authority check at program level for all the custom programs and transactions. I tried to use RSABAPSC but this gives for each program/ transaction.
Can you guys help me to find a best way to get the list for the whol transactions and good approach to complete the task at ace and good way.
Please comment your best practices and approaches for this.
Let me know if you guys need any more information from me to make the above more clear.
Thanks.

Hi Amit
I do not think you will find any relevant standard report/functionality in the SAP System, that could scan your Z-Report and find out if it's correctly secured with authorizations checks. Many of those checks could hide in called functionmodules, Methods etc.
And you still have need to define and check each SAP report for your companies specific security requirement.
With 1000/1500 Z-transactions/reports, my guess is, that a lot of them might be obsolete, never used, temp programs for dataloads etc. So mayby you do not have to focus on all of them, so I think that my approach would be, to try to limit the number of report that I needed to investigate thoroughly, and then take the reports one by one.
The steps involved would be something like:
1. Find out which of your Z-reports/T-codes thats actually used. You should be able to se that in SM20(if you have activated the secure audit log with the correct filters), ST03N etc. Report/T-codes that are not used could be locked in SM01.
2. Investigate the used reports one by one, Check the Source-Code, do an Authorisation trace etc - Remember that if your Z-Report used BAPI and other SAP Standard functionality, Or if i reads from at DATASET etc.. you might not be able to spot the Authority-check statement in your source code
3. Implement and test the relevant and requirered additional authorization check
4. Document in SU24
5. Adjust the roles
And your ready for test.
And yes I know,,, It can be a hugh job, but I do not think that you can find a quick-fix for this.
Regards
Morten Nielsen

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be fund raising, gift p

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be dependent on the customer type selection from the first list. Some examples would be: fund raising, gift planning, surveys, and others. The purpose of the trip would be dependent on the program type selected from the second list. Some examples of trip purposes would be: presentation, design, prospecting. Further, the purpose of trip selection from the third drop-down box would then have to determine the values of other fields by expense type: such as commission, airfare, hotel. etc. I've tried pop-up menu but can't figure out how to "select" from the final popup list and have it populate a field for the purpose of the trip. I've tried to look at the JavaScript examples for dependent drop-down boxes, but can't find any that quite fit what I'm trying to accomplish. I am very new to all of this. No training in writing Javascripts - just trying to wing it. The form has to be very simple for our consultants to use, but also give our office the detail we need to process through the correct account numbers. I would appreciate any detailed step-by-step instructions - kind of a javascript for dummies type of info. HELP!

An AcroForm is the name given to the type of PDF form that you create in Acrobat. An XFA form is the type of form that you create in LiveCycle Designer. Although they are both PDF files, they are very different structurally and have significant;y different scripting models. So pay attention to the information on AcroForms and ignore anything about XFA. Be sure to get the sample PDF forms so you can look at how it works and where the scripts are placed.
What you want to do will require scripting, and if you don't have the experience and are unable to use the information in the tutorials to create what you want, you might consider getting someone who has experience do this for you. I'll often suggest code if I can do so quickly, but what you want requires more than a few minutes.

Mail Alert to Managing Director for every transaction for customer & vendor

Dear Gurus,
Please let me know how & where to do setting for mail alert to Managing Director for every transaction for customer & vendor,
Like for Customer: Sales Order, PGI, Invoice, Payment receipt................
for Vendor: Purchase Order, GR, Miro, Outgoing Payment for Vendor,
Thanks in advance,
Sai

Hi Sai
If you want to set the mail alert to Managing Director for every transaction for customer & vendor Like for Customer Sales Order, PGI, Invoice , PO then maintain at all levels output type and at all levels for those output types assign the authorization as Managing Director
But for what purpose you want to assign the authorization member at all levels, what is your requirement?
Regards
Srinath

Contents of a custom print program for a custom smartform

Hi...
Can you please tell me if we are writing a custom print program from scratch for a custom smartform for which there is no standard form available what are all the things that need to be coded in the print program..
My doubts on this are if we are configuring this form for output types of PO purchase order for mediums 1,2, 5 and 6 does any extra coding need to be done in the print program that is related to these mediums or is it just a configuration issue..
Apart from data retrieval part and call the function modules to send the data to smartforms what are the other things that we need to code in a custom smartform.. Anything that we need to code related to printing issues..
It would be great if someone can post a custom print program for any output type valid for mediums 1, 2, 5 and 6.
Also my last doubt is do we need to do anything in SE11 in designing a smartform and in what context do we need it...
Thanks and appreciate your help... Surely will reward for all the helpful answers..
Thanks again..
Kanthi..

Hi,
yes you need to create your own print program. You need to catch printing information and to send data to your smartforms.
To send data to your smartforms you need to use structure describe in the data dictionnary.
This is a peace of code for sending information to a smartform that will be print used an external program (Esker)
DATA: it_data       LIKE TABLE OF zssf_bl WITH HEADER LINE,
        w_formname TYPE tdsfname ,
        w_fm_name TYPE rs38l_fnam ,
        is_output TYPE ssfcompop ,
        is_control TYPE ssfctrlop ,
        is_job_out TYPE ssfcresop .
* Récupère le nom du module fonction.
MOVE 'Z_BL_STT' TO w_formname.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname                 = w_formname
    IMPORTING
      fm_name                  = w_fm_name
    EXCEPTIONS
      OTHERS                   = 3.
* Prépare les paramètres d'impression.
is_output-xsfcmode   = 'X'.
is_output-xsf        = 'X'.
is_output-xsfoutmode = 'S'.
is_output-xsfoutdev = 'DOCL'.
is_output-xsfformat = 'X'.
is_output-tdnoprev   = 'X'.
is_output-tdnoprint = ' '.
is_output-tddest     = 'DOCL'.
is_output-tdprinter = 'PLAIN'.
is_output-tdnewid    = 'X'.
is_output-tdimmed    = 'X'.
is_output-tddelete   = 'X'.
is_control-no_dialog = 'X'.
is_control-preview   = ' '.
is_control-no_open   = 'X'.
is_control-no_close = ' '.
* Prepare le formulaire
CALL FUNCTION 'SSF_OPEN'
    EXPORTING
      user_settings      = ' '
      output_options     = is_output
      control_parameters = is_control
    IMPORTING
      job_output_options = is_job_out
    EXCEPTIONS
      OTHERS             = 5.
* Appels du formulaire.
CALL FUNCTION w_fm_name
    EXPORTING
      control_parameters = is_control
      output_options     = is_output
      is_bl              = zbl_soustrait
    TABLES
      it_data            = it_data
    EXCEPTIONS
      OTHERS             = 5.
You need to catch information from the NAST table maybe
Rgd
Frédéric

Software Metering Report - Install base for all metered software programs - Returns 0

Hi All
I have an issue with one of the software metering reports, Install base for all metered software programs. when run it returns that the metered software is installed on 0 computers.
All usage reports seem to work correctly and I can see usage data for the monitored applications. But anything related to install base such as the one listed above and "Computers that have a metered program installed but have not run the program since
a specific date" either return 0 or are blank.
Any help will be greatly appreciated

Hi All
finally found a fix to the problem. It was very closely related to what Gareth had mentioned regarding Asset Intelligence. The actual method of detecting if a program is installed is done through Software Inventory
Under Custom Client Settings i had enabled Software Inventory on client but never setup any rules to gather data. So i created a new rule for all *.exe files and around an hour later the report started to show up clients.
This blog post also describes the method of setting up software inventory correctly
Thanks to all the help and hopefully this will aid anyone else encountering similar problems

Create transaction for update a custom table

Hi,
I have a custom table Z****. What are all the steps to create a transaction for updating my custom table? I don't want to use SM30 anymore.
Thank you.

Create a Table maintainence through the maintainence generator.
Open table in SE11, goto utilities => table maintainence generator.
Once the generator is created,
In the same screen of generator - Goto Environment => Transaction Code
Select Transaction Code with Parameter.
In the default values - Enter the Transaction as SM30 . Select skip first screen.
In default values at the bottom
Add
screen field = VIEWNAME and value = Ztable name.
screen field =UPDATE and value = 'X'.
Edited by: Pranu Pranu on May 19, 2010 2:36 PM

Standard Transactions for looking at Customer list in 4.5 systems

Hi Friends,
I need your help on this issue.
Can anyone provide me the standard transaction for looking at Customer list for a company code and credit limit overview for customers.
Tables are KNKK AND KNB1

Thanks buddy for the immediate reply but i want to make this question simple.
I am now trying to pull out is there any Standard transaction code which has been used for the table KNKK AND KNB1.
If so how to find that whether any tcode is associated to find the Customer list for both the tables
Thanks in advance
kishore

Transaction for overview of all custom (Z) programs in ERP.

Similar Messages

Maybe you are looking for