Transaction Launch issue

Hi All,
Using Transaction Launch wizard, i have created the link in UI for the GUI trancation.
Now in UI navigation bar able to see the link . But if i click the link it has not calling the GUI report from the same system. At that time spinng wheel is rotated and then stoped but report is not launching.
Here using transaction name starts has with '/' instead of 'Z'. will it be any issue or any other place i have done the mistakes.
Thank you,
Chabalan

Issue Resolved, used transaction starts with "Z" instead of "/".

Similar Messages

Transaction launcher issue in IC Web..

Hi all,
I have assigned the "CL_CRM_IC_ABOXSAMPLE_LEAD_PRO" class in the Launch transaction.
But in the output, it is displaying that in display mode, even i could not be able search the lead transactions(PCUI transactions).
for my userid "SAP_PCC_IC_AGENT" role has been assigned
but didnt get the screen in edit mode.
When i click the "Lead" in the navigationbar, first it is showing the error that is
"Execution is not Posiible, Data flow error". when again i click on the same "Lead" link, then i am getting lead search screen that would be in display mode only.
could any body help me on this issue, it is very urgent
Thanks in Advance,
Regards,
Venu

Hi Venu,
Have you assigned the Process_type ( transaction type) LEAD while creating the transaction launcher using Wizard. It is assigned in the step Transaction Parameter, choose parameter : create_parameters, and assign Process_type.
Regards,
Shalini Chauhan

Transaction Launcher issue with url with extension aspx

We have created a launch transaction to a web page. The web page is: https://www.pcaims.com/login.aspx
We can open the web page successfully directly from the internet, However, it will not open through the Transaction Launcher link. This is the first url we have had to create with a .aspx extension. Can CRM not handle this.
the error message is: The Web Server may be down, too busy, or experiencing other problems preventing it from responding to requests. You may wish to try again at a later time
As I said when I launch this directly in the internet I have success.
Any ideas

We have only one check box HTTPS in 6.0. There is no HTTP check box. By default it is HTTP.
Please let us know if it is HTTP or HTTPS that need to be selected?

Transaction Launcher - TCode Authorization Issue for ERP transaction

We are trying to implement an ERP transaction in the CRM WebUI via the transaction Launcher. Everything has been set up properly and the transaction appears in the nav bar. I am running it to launch a new window. When i click on it, a new window pops up, with transaction IC_LTXE and an error saying
*"You do not have authorization to view transaction ZSD_IC".*
Everything seems to be set up properly and we can access the transaction with the same user id in ERP. He has SAP_ALL.
Does this have anything to do with IC_LTXE? Is there anything special i need to do to assign proper authorization to this user.
Thanks,
jeremy

Hello Jeremy,
We are trying to execute R/3 transaction from Transaction Launcher but we are facing problems.
In order to execute transactions from TL we have copied object TSTC to ZTSTC in both systems and use the method Execute to be used from Transaction Launcher customizing. Then we have customized T. Launcher in order to get two links, one to R3 transaction (using the object ZTSTC, method execute and XD03 as value parameter) and one to CRM transaction (using the object ZTSTC, method execute and CRMD_MKTDS as value parameter).
When we execute the TL link to CRM, transaction works properly through ITS, but executing the link to R3 transaction we receive the following popup message:u2018Logged Off Successfully. You have been logged off from SAP NetWeaver Application Server.u2019 the screen gets in blank and no further actions are executed.
In order to correct the fail we have implemented these notes, but the problem still remains.
0001224663 Launch of Front Office with Transaction Launcher fails
0001263716 Launching Front Office Process using Transaction Launcher
Based on your experience could you help us to get the right configuration to reach R/3 transaction through Transaction Launcher.
Thank you very much in advance.
Best regards.

Error in transaction Launcher handler class

Hello friends,
I am following the step from the CookBook for the creation of the Transaction Launcher
but in side the class method
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
it is showing the error
CREATE_ENTITY is unknown or Protected or Private.
Its supper class is CL_CRM_IC_ABOX_ABSTRACT_BOR
and interface included is IF_CRM_IC_ACTION_HANDLER.
Will i have to make any change in side these class or there any other way to configure the transaction launcher.
Regards
Pulkit Agrawal

Hi Sudeep,
Thanks for the reply.
I am not sure about the EEWB extensions.
Initially I created a launch transaction using BOR method the path of the ECC logical system is given as below.
http://ssever:port/sap/bc/gui/sap/its/CRM_CIC_RABOX
But now I've changed the path as: http://ssever:port/sap/bc/gui/sap/its/CCMP_RABOX
and it is working now. I am able to pull the transaction from ECC although some other data flow issues are there.
So looks like there is some issue with the serivce CRM_CIC_RABOX in our system.
Thanks to all,
Nag

Unable to access ECC transactions from CRM using Transaction Launcher

Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
3)     Is there any other issue and need development specifically related BOR TSTC?
Warm regards and thanks in advance for your time.
Prasad

Hello JC,
Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
Transaction Launcher
Regards,
Ashik

Using the transaction launcher to call a BOR method to display a PDF

Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
In CRM 4, in the collection factsheet assignment block, the link was coded into an XSLT which is then displayed in the GUI and you would have a clickable link for a pdf file in a row in a table. That link would be as follows:
         <xsl:variable name="ev_key">SAPEVENT:?OBJTYPE=<xsl:value-of select="attributes/OBJTYPE"/>&OBJKEY=<xsl:value-of select="@KEY"/>&LOGSYS=<xsl:value-of select="attributes/LOGSYS"/></xsl:variable>
             <a href="{$ev_key}"></a>
This will get the file in IXOS and display it, in CRM 4. In CRM 7, the link is an icon in every line of an assignment block.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block and have it open? If so, how? Transaction launcher, function modules (like ARCHIVOBJECT_DISPLAY) in the OPTA package? (the package for all IXOS related function modules..)
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system?? or sapevent:xxx?
3) Do we have to configure a transaction in the IMG to be launched with the attributes listed there? Do we have to link it to any classes/ objects?
4) Do we have to have the code to the logical link dynamically to call the right PDF for each table line? Is it right to put this code in my event handler?? Usually transaction launchers are just in the nav bar.....
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG for the transaction launcher, and have the attributes defined for my BOR object that I would call, and pass it different attributes (eg. objtype, objkey, logsys...) and then return the PDF and display it in the UI in a new browser window by itself. (There is a BOR method for my BOR object named 'display_pdf'!!!!)
What do you think would be the optimal solution here? Does my theory of calling a BOR object with a transaction launcher to display a PDF make ANY sense whatsoever???
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante
Edited by: Jonathan Laplante on Jul 2, 2011 4:50 AM

Hi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
   iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

ITS WebGUI in CRM(By transaction launcher )

Hi all,
We would like to incude transaction "S_AE2_89000019" from CRM to SAP CRM WEB Client UI.
We have done the following steps using the SAP best practices (C04-Configuration guide):
1. in transaction CRMS_IC_CROSS_SYS we have configured the CRM system with url: http://CRMnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
and ERP system with url
http://ERPnameServer:httpport/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTX&okcode=ICEXECUTE
2. we have set TSTC to synchronous (CRM and ERP)
3. we have configured transaction launcher through wizard (tx CRMC_UI_ACTIONWZ)
4. we have created logical link for transaction and we assigned the link to work center and business role.
The problem is that when we are opening the SAP CRM web gui and click on the link that we have created, we take a blank picture with a red x "PLease wait..." and nothing else opens.My CRM Version is 7.0 EHP1.
The webgui service in the tx sicf have been a test, after login in, a blank picture with a red x "PLease wait..." is also remaining.
Can anyone help?
Thanks in advanced.

Lei Cao,
Want to check if this issue is resolved. I have the same problem where I am getting 'please wait" with red x screen when I configured transaction launcher from crm web ui.
Did you ever get this resolved? If so please share your approach ? And is this authorization related?
Rajani

RFC error for Transaction Launcher to launch a CRM ABAP report on WEB UI

Hi all,
My Task is to assign a custom CRM report on the web ui.
I have created a transaction for this and using the transaction launcher wizard to assign it as a link on web ui .
In the transaction launcher wizard , In the 'Define Further Technical Details' i have entered the
Transaction Type as 'BOR Transaction'
Logical system : my current system crm client which is QCCCLNT703
BOR OBJECT TYPE : tstc_uif (also tried with TSTC )
Method Name : EXECUTE
When i try to click on the report on WEB UI, it gives me a status message saying the ''RFC Destination is not set up for QCCCLNT703'.
Can you please advice me on how to do this . I guess the issue is with the Logical system set up .

Hello,
I think you have rightly pointed out the reason of the error. You must have maintained the logical system 'QCCCLNT703' using transaction CRMS_IC_CROSS_SYS. However you also need to maintain the same entry in transaction SM59 with name RFC destination name as 'QCCCLNT703'.
I hope this would fix the issue.
Thankx,
Amit Sen

Transaction Launcher to launch a ABAP report

I have to assign a SAP CRM ABAP report to Web UI. I am trying to create a Link using Transaction Launcher and in "Enter Further Technical Details" trying to use BOR Type as "ZTSTC" and assign it Method "Execute" which i cannot find.
SAP IMG help directs to use "TRDIR" for BOR type's which i cannot assign.
Any help is greatly appreciated
Thanks
ARK

Hi all,
Iam trying to create a link for a CRM report program on web ui using transaction launcher wizard. In the 'Define Further Technical Details' i have entered the
Transaction Type as 'BOR Transaction'
Logical system : my current system crm client which is QCCCLNT703
BOR OBJECT TYPE : tstc_uif
Method Name : EXECUTE
When i try to click on the report on WEB UI, it gives me a status message saying the ''RFC Destination is not set up for QCCCLNT703'.
Can you please advice me on how to do this . I guess the issue is with the Logical system set up .
My Task is to assign a custom CRM report on the web ui.

Transaction Launcher to call custom transaction

Hi ,
I have a requirement where i need to call a custom transaction using transaction launcher. I am able to successfully launch the transaction. But i need to pass a value to the transaction.
For eg. If i am calling a custom report transaction which has a selection screen field 'FORMNAME' as a parameter i need to pass the name of the form to the transaction. I am not able to pass that value. Can any one help me onthis.
I have seen all the posts , but could not get any help on how to set the value for custom transaction. I can see how it is done for standard transaction.
Regards
Ansari

Hi Any help on this....I am still awaiting the response.
Requirement: My requirement is to launch the SE38 transaction on WEBUI using transaction luncher tool and set the parameter on the selection screen.
Issue: The issue is that I am able to lunch the transaction but unable to set the parameter
Steps Performed:
I want to list down all the steps I performed to launch an SE38 transaction using transaction launcher on the WEBUI
1) Defined logical system in tcode CRMS_IC_CROSS_SYS
-The logical link looks like this
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=IC_LTXE&okcode=ICEXECUTE ?sap-client=300
2) Defined URL & paratemeter wherein the request method is "GET", opted for NON-BSP URL
URL link here is
http://<server>:<port>/sap/bc/gui/sap/its/webgui/!?transaction=SE38&okcode=ONLI
-Note: My selection screen okcode os ONLI*
-The logical system ref is provided here
3) Defined the parameter by giving the screen name like for SE38 selection screen name is "RS38M-PROGRAMM"
4) Configured the transaction launcher of type B - URL type and provided the reference of the URL ID, choose the relevant parameter from the drop down and have hardcoded the value, cheked the box "Save Data in Activity Clipboard
5) Added this in the NAvlink/Bus Role etc
6) Now in the handler class of the TL the code looks like this:
IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW
__gdc ?=
cl_crm_ui_data_context_srv=>get_instance( gv_view_controller ).
__value
=
'ZC_TEST'.
add_parameter(
iv_name =
'RS38M-PROGRAMM'
iv_value = __value ).
However, after performing the above steps I am unable to set the parameter. Please suggest where am I missing out on. An early response would really be appreciated.

IC Webclient - PCUI Transaction Launcher - CRM5.0

Hi,
I'm trying to create a PCUI transaction using the transaction launcher from the IC webclient. I have configured the 'Transaction Launcher' using the wizard for a 'Sales Order Search - '.
Application - CRMD_BUS2000115_F4
View - Default
Object Type - BUS2000115
The problem is, when i run the IC WC, and click on the link from the navigation bar, it gives me an error "Execution not possible; data flow errors" and displays a blank page within the IC WC window. If i click on the link again, it shows the page with all the grayed out fields.
Please let me know how to resolve this issue.
Thanks,
VSingh.

Hi Thirumala,
When you say 'Make sure that you locate the correct action implementation class and make changes correctly', I hope you meant the class that was created by the wizard at the time of PCUI link creation. This class implements IF_CRM_IC_ACTION_HANDLER' interface and extends CL_CRM_IC_ABOX_ABSTRACT_PCA' superclass.
I have modified IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW method as mentioned in your other thread with the following entry:
me->gv_data_flow_complete = abap_true.
but still no luck...
Please let me know if any other settings/changes required.
Appreciate your help!!
Thanks,
Vsingh..

IC WebClient transaction launcher

Hi all,
I was wondering if anyone had used the transaction launcher in the IC web client to call a PCUI application. I have done this following the cookbook and added my own custom code. It works fine except for one small problem, the PCUI app is not maximize so it gives a small usability issue.
Any help on opening the PCUI app in maximize mode would be much appreciated.
Cheers
Andrew

Hi Thirumala,
When you say 'Make sure that you locate the correct action implementation class and make changes correctly', I hope you meant the class that was created by the wizard at the time of PCUI link creation. This class implements IF_CRM_IC_ACTION_HANDLER' interface and extends CL_CRM_IC_ABOX_ABSTRACT_PCA' superclass.
I have modified IF_CRM_IC_ACTION_HANDLER~PREPARE_DATA_FLOW method as mentioned in your other thread with the following entry:
me->gv_data_flow_complete = abap_true.
but still no luck...
Please let me know if any other settings/changes required.
Appreciate your help!!
Thanks,
Vsingh..

Transaction launcher not working for custom business role

Hi Experts,
I am facing a very weird problem where the transaction laucher define for BOR transaction is working for one business role(Z business role Customized one) but its not working for other business role (Z business role).
to emphasize further we have the code:-
case ls_attributes-object_type.
    when lc_z23 or lc_z25.
      lv_logical_link = lc_ZITISU.
    when lc_BUS2000115.
      lv_logical_link = lc_ZITERP1.
    when others.
      lv_logical_link = lc_ZITERP2.
endcase.
l_if_navigation = cl_crm_ui_navigation_service=>get_instance( me ).
IF l_if_navigation IS BOUND .
Navigate to transaction launcher using link id
    l_if_navigation->navigate( iv_link_id = lv_logical_link ).
ENDIF.
in this the logical link is is lc_ZITISU whenever this BSP application is called from both the business roles but in one the window opens up for BOR transaction whereas when we login again using different business role the code is the same as given above. I mean the sam logical link id is used and navigated to but window is not opening for transaction launcher as it happens for the previous business role.
Request your help to resolve this issue.
Thanks,
Rajwin

Hi,
I tried by applying the PFCG role id of business role which was working to the business role id of the one for which it wasn't working and then try testing whether the transaction launcher is triggering. But the transaction launcher screen is still not opening even after doing this.
Probably there's something else too which is causing the problem. Request your inputs on this,
Thanks,
Rajwin

Transaction launcher: open URL in new window

Dear all,
I know many threads have already been posted about "stateful URL" created with transaction launcher, that open a new browser window AND navigate to an empty screen with the following text (which is more than useless):
"The requested page has been opened in a new window, please press back button to go back to the last page."
Carsteen gave some useful hints already in the following thread:
Transaction Launcher in a new window
But maybe someone found something new since then... At the moment I'm thinking about "simulating" a clic on the BACK button (like mentioned in this useless message), with something like :
DATA:
history TYPE REF TO if_bsp_wd_history_manager_disp.
history = view_manager->get_history_manager_display( ).
history->go_back( ).
Any better idea ?
Thanks & regards,
Nicolas Busson.

Hi Nicolas !
How are you? :-)
I assume that since then you have found a way to fix your issue, but as the post is not answered I can tell you that SAP has taken into account this point in SAP 702 EHP1, with a new attribute in the customizing of the transaction launcher called "Keep Work area" :
Keep Work Area When Opening Launch Transaction in New Window
This indicator defines whether the work area content is kept when you open a launch transaction in a new window.
Use
If this indicator is not set and a launch transaction opens in a new window, then the main window loads the base page of the transaction launcher into the work area.
If this indicator is set and a launch transaction opens in a new window, then the main window keeps its current content in the work area.
Dependencies
This indicator is only evaluated if you have also set the indicator for using a new window.
Imed.

Transaction Launch issue

Similar Messages

Maybe you are looking for