Transfer change lists API

Hi
I am looking for API to transfer change lists in Integration Directory. Can anybody help me in finding the API or how to resolve it?
Thanks and Regards,
Damian

Hi
I have a similar requirement as Damian. I need an API (either a Directory API in SWC Basis or an api in the ABAP stack of PI) to read all the changelist IDs created for a particular user (user name being the query string).
Any pointers?
TIA.
Regards
Keshav

Similar Messages

Can not release change list in Integration Builder: Design

I got the following error any time i try to release a change list in the integration builder: Design.
#18 13:51:21 AWT-EventQueue-0 ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.gui.operations.rb_commands.MESSAGE_TRANSPORTERROR
com.sap.aii.utilxi.swing.framework.FrameworkException: Errors occurred when transporting the change list
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:203)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Root cause:
java.lang.AbstractMethodError: com.sap.aii.ib.sbeans.transport.TransportServiceRemote_Stub.releaseForeignChangelist(Lcom/sap/aii/ib/core/clmgmt/ChangeListData;Lcom/sap/aii/ib/bom/gen/XiTypeId;Lcom/sap/aii/ib/core/transport/api/options/ExportOptions;)Lcom/sap/aii/utilxi/misc/api/ICheckResult;
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187)
at $Proxy6.releaseForeignChangelist(Unknown Source)
at com.sap.aii.ib.client.transport.gen.TransportServiceDelegate.releaseForeignChangelist(TransportServiceDelegate.java:218)
at com.sap.aii.ib.gui.operations.TransportCLCommand.execute(TransportCLCommand.java:189)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:196)
at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:134)
at com.sap.aii.utilxi.swing.framework.CommandAction.actionPerformed(CommandAction.java:69)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.AbstractButton.doClick(Unknown Source)
at com.sap.plaf.frog.FrogMenuItemUI$MouseInputHandler.mouseReleased(FrogMenuItemUI.java:833)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)

See these threads, may be these help you:
Re: Logon to Integration builder & repository hangs
How to use TCPGateway
Search for AWT Enqueue error:
http://backups.lbl.gov/backups/documentation/SysAdmin/4.5/NetBackup_Release_Notes.pdf
BR,
Alok

Clearing closed change lists in Integration Directory

Hello,
Not really an important question, but one that I would to know the answer to nonetheless. How can I clear the change lists listed under my closed changed lists? I've been playing around in the XI system and have a bunch of them and it would be nice to be able to 'purge' them somehow.
Thanks,
Mike
Message was edited by: Mike Yang

Hi Mike,
<i>>>the delete option is greyed out.</i>
Are you sure you are in seeing your 'Standard Change List'?What else option you can see?
If you are viewing some other users Change List, then there will only be two options :- Open and Transfer. Click transfer and the change list will be added to your Componenet, then activate it.
Hope this will be helpful.
Regards
Suraj

Not able to see other users change list in IR/ID

Hi All,
I need to perform the CTS+ transports in PI 7.1 and when ever i am going to change list tab apart from my user id i am not able to see any other user id to transfer the objects to my id
Is some setting is missing or some role we need to assign.
Appreciate your reponse on this.
Thanks
Ankur

Hi Anku,
Have a look on this doc [Limit Authorization PI Content objects.pdf|http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/a005629b-c063-2910-0fb8-f57dc68abaca], and/or contact your basis team who manages the user roles...
The same in [e-learning|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40457bb0-c663-2910-85ad-f5f42edb715a].
just in case of... for ESR authorization, you have this one [How To Setup Profile Based Authorization In ESR Using PI 7.1 EHP1|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50a3efb4-57a1-2d10-a6b9-fed6d21799f8?QuickLink=index&overridelayout=true]
Else... a stupid question:
in "change list" tab, have you click on the "filter" button to be able to select "User = All" ?
and then to do your transfer...
Regards.
Mickael
Edited by: Mickael Huchet on Feb 14, 2012 9:24 AM

Transporting directly from ID transporting from transport change list

Hello,
am using CTS+ transport.
Here, what would be the difference after activating, all my objects of a CS go into tranportable change list and then i release for CTS transport, for all the objects of the CS.
And, what if I do not do the above step and after activating my change list, right click on my CS and hit "export" and use the mode of transport as "cts" and transport the entire CS?
My IR objects got successfully transported by the 2nd method.
MY ID objects are failing, am not too sure, if this is the reason. Groups and tragets in SLD are correctly maintained.
Thanks,
vishal

Hi Vishal,
What we do is: (From Dev to QA)
in Dev:
1) Right click on software component,select Export, mode CMS
2) Select objects to be transported.
3) Export
in QA:
1) go to change list of lsadmin.
2) Transfer list to your name
3) Make necessary changes(communication channel parameters,etc)
4) activate.
Same has to be done from QA to Prod
Are you doing the same?
Thanks
Regards,
shweta

Can not close a change list in XI

Hi all,
I am not able to close or transfer a change list in XI due to a "Missing value for objVersion!" error. It is preventing me to transport any interface to this system due to the same error. Both things seems to be related and I need to delete or close the change list in order to be able to transport the interfaces.
Any idea?
Much appreciated
Diana

HI Iñaki,
This is a new interface and it is not in the target system so there is no conflict there. We tried to transport it but the change list is now empty and we can not do anything with it. There is no conflict tab...
Thanks
Diana

Error while activating the object from change list in IR

Hi Friends,
I am trying to activate a mapping object taken from History.But I am getting error "version management was unable to execute the last action because temporary internal lock has been set" while activating from change list.
Regards,
Suresh.

Hi Suresh,
have a look at the integration builder start jsp. There is a Link "Administration". On this page, on the left side, you can click on "lock overview" and check if your object is locked. Then you can remove this lock.
Best Regards
Sven

PI 7.11 - Change List notification

All:
I was wondering if anyone of you noticed the below actions in your PI 7.11 system.
Open any of your Service Interfaces(Message Interfaces) , just give a space in the description, activate your change list. Now go to the Menu - Environment - Cache Status Overview - Check if your activated objects showing up in the list
I'm not seeing it my system and I checked with couple of other friends as well - They are not seeing it.
Now,
Open any of your Message Mappings , just give a space in the description, activate your change list. Now go to the Menu - Environment - Cache Status Overview - Check if your activated objects showing up in the list
It will show up in the list.
Question: Why does the Service interface changelist is not showing up in the cache status overview. How come we know if the objects got successfully changed?
I found a work around too: If I want to change the Service Interface, change it and then just do the same steps as I did for above Message mapping and activate both together. Now you will see your changes( Service Interface + Message mapping).
Weird isn't it ? Or I'm missing something here.
Thanks!

Please see the below response from SAP:
Regarding to the issue itself, I've confirmed with the next level
support that the system is working as designed.
Only cache relevant objects will be visible after an update. The
following repository objects need to be cached:
Interface Mappings,
Message Mappings,
Imported Archives,
Repository Processes,
Adapter Metadata (AMD).
A Service Interface is referenced in the mapping. Therefore, the
Service Interface itself is not cache relevant but the mapping is.
Thanks,
Raj.

My old PC broke, it was the only pc my classic was sync with. New PC only shows 1 song (recent purchase) so am worried about sync to it in case I lose the list on my ipod which is still intacted. How can I transfer my list to new PC

My old PC broke, it was the only pc my classic was sync with. New PC only shows 1 song (recent purchase) so am worried about syncing to new PC in case I lose the list on my iPod, which is still intacted. How can I transfer my list to new PC?

I'm having a similar problem, but I do have the key and is not working anyway.
My old pc was running on windows 7 and my new one is an apple running on Lion.
My phone is an Iphone IV and I can see all the bookmarks there.
In order to sync, what I did was click on the "I don't have the device with me", I entered the key that was provided and the process finish ok. It says congratulations, etc, etc.
But the bookmarks are not there, I tried merging data and replacing data on this computer options but is the same.
Any suggestions?

Approaches to transfer changed data from a table to another table

Hello expert,
will you please show me all approaches to automatically detect and transfer changed data from a table to another table ? I don't need detail information, but a little comment for those approaches are more welcome.
Many Thanks,
Edited by: 843178 on 19-Dec-2011 2:04 PM

You will want to review information on replication and similar methods
In a nutshell:
Replication allowed data to exist at more than one site and take the Master / original table data and clone it at a different site
As tranporting all of the table data to a remote / clone site got more and more expensive we developed a method
to identify just the 'diffs' and only send those from the master to the clone which needed only the diffs to become a clone of the master table
This has many methods and options, but looking under key words such as
- distributed transations
- materialized views
- replication
... are a few categories that will get you started

How can I hide what I write in a find and change list

I've written a find and change script, I prepared to offer it for anyone to use, but I don't want to anyone to read what I write in the find and change list.
How Can I hide it?

OK, my be offer it for someone to use it, I mean in house coworker, no any virus in it.
How can hide the find and change list, or change it to another format, not just .txt.
mybe change it to .doc or .vb or .js, and the script still can run well.

ABAP Mapping - Message shown in Standard Change List Process Log

Hi
I am working with ABAP Mapping program. I had created ABAP class using ABAP workbench. Before this, in exchangeProfile..data was provided for com.sap.aii.repository.mapping.additionaltypes ==>> as " R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine) " and 'Saved'.
In Interface Mapping, after providing the Class Name under 'Mapping Program' and activated. After activation (Standard Change List), it is showing the following messages under 'Processing Log'.
--> Standard Change List - Process Log message
Activation of the change list canceled Check result for Interface Mapping IM_ABAP_MAPPING | http://ABAP_Mapping_SREE: Type R3_ABAP of
program ZSREETEST is invalid because it is not registered in the exchange profile . Check the values for the exchange profile parameter
IntegrationBuilder.Repository.com.sap.aii.repository.mapping.additionaltypes
--> End of Log message
Can some one please guide me in resolving the ABAP mapping issue.
Thanks in advance.
..Sree

Sree,
The log says that there is ABAP mapping included in your exchange profile. Do the things what michal have told and also check your mapping program whether working fine or not in SXI_MAPPING transaction.
You can see this weblog for reference:
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
---Satish

Activation of the change list canceled

Hi Guys
I am doing the SOAP to FILE Scenario using BPM when I activate my Integration Processes (Soap_to_file_BPM ) i get the below error, on my IM the source is "yonela_ob_mi" and the target is "yonela_ob_mi_AS" which is my abstract.Then on the Transformation step my container is Abstract Interface. This "yonela_ob_mi" interface I am using on my message mapping
So what am I doing wrong
Activation of the change list canceled Check result for Integration Process Soap_to_file_BPM | http://yonela.com: Expression must return the interface type yonela_ob_mi
Thanks
Yonela

Hi Guys
Thanks for ur assistance its working the error is gone, I only needed to make both my Interfaces to be Abstract as u suggested.
Only one error now when testing on sxmb_nomi I get the bellow error: What I want to do is to split flat file and send it to my ftp server (InBound) folder.
On my have MM i have created Node Function the is spling by value
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Split mapping created no messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Yonela

Sharepoint 2013 online - Site problem - Recently changed list

Hi All,
I'm trying to add Recently changed content WebPart to my site on Sharepoint 2013. Standard setup no customizations just plain simple site with one document library and notes. All seems fine with adding content to page, saving and so on. But when I want to
preview / view my site there are no elements on Recently changed list although in properties of webpart when I modify query and go directly to Test - all is fine and results are there. Probably there is small switch that I'm not aware of to turn this list
on. Anyone can help?
Kind regards
Adam

Hi,
As my understanding, you want to extract InfoPath form attachment into a SharePoint library.
For SharePoint Designer, there is no SharePoint actions to extract InfoPath attachment into a SharePoint library. As a workaround, you can develop a custom workflow activity to do it.
Or, you can find a third party solution to achieve it.
There are three articles similar with this topic, please check if they are useful for you:
http://www.bizsupportonline.net/infopath2007/use-workflow-extract-file-attachment-infopath-upload-sharepoint-document-library.htm
http://www.bizsupportonline.net/blog/2009/06/use-custom-sharepoint-designer-action-extract-attachment-infopath-form-add-sharepoint-document-library/https://askmanisha.wordpress.com/2013/10/04/extracting-info-path-attachment-using-nintex/
Thanks,
Wendy
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Address book... change list of messengers.

I would like to change list of messenger that is available in Address Book. Now you can choose among these messenger: Jabber, MSN, Yahoo, AIM and ICQ. I would like to add, for example Skype. How can I do? Is there a way to change that list?
Thanks

Not directly no, unless you go under the hood of that program, which may then give a headache when you try to Sync it.
Provide a feedback to Apple to include Skype in an update.
http://www.apple.com/macosx/feedback/

Transfer change lists API

Similar Messages

Maybe you are looking for