Transporting directly from ID transporting from transport change list

Hello,
am using CTS+ transport.
Here, what would be the difference after activating, all my objects of a CS go into tranportable change list and then i release for CTS transport, for all the objects of the CS.
And, what if I do not do the above step and after activating my change list, right click on my CS and hit "export" and use the mode of transport as "cts" and transport the entire CS?
My IR objects got successfully transported by the 2nd method.
MY ID objects are failing, am not too sure, if this is the reason. Groups and tragets in SLD are correctly maintained.
Thanks,
vishal

Hi Vishal,
What we do is: (From Dev to QA)
in Dev:
1) Right click on software component,select Export, mode CMS
2) Select objects to be transported.
3) Export
in QA:
1) go to change list of lsadmin.
2) Transfer list to your name
3) Make necessary changes(communication channel parameters,etc)
4) activate.
Same has to be done from QA to Prod
Are you doing the same?
Thanks
Regards,
shweta

Similar Messages

In CMS, there is no Transportable change list in ID

Hi All,
I am using CMS. I want to transport Configuration Objects. But when I am going to Change list tab page in ID, I am able to see only open and close Change list. There is no option called Transportable Change List.
I have followed HELP.SAP.COM which tells,
"You have created an XI track in the Landscape Configurator and entered the addresses of the development, consolidation, and productive directory. There are no software component versions in the Integration Directory. Therefore, for directory transports using the CMS, you specify the software component version SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0). This refers to all configuration objects of the Integration Directory.
Once you have made this setting, you can create transport lists for the CMS. The status of the change lists no longer changes to Closed immediately after their release, but first changes to Transportable."
But still the status of the change list changes to closed and there is no tab called transportable change list.
However I am able to transport IR objects correctly and there I am able to see Transportable change list too.
Is there any specific configuration for this??
Warm Regards,
Gouri

Hi Gauri,
for ID, the XI track which you have created, you should specify SAP-INTDIR 3.0 (EXCHANGE DIRECTORY 3.0) swcv.............now you create a new config scenario in ID.............Now you should see transportable change list in ID....
Thanks,
Rajeev Gupta

CTS - Don't Always Want Transportable Change Lists

Is there a way to turn off automatic creation of the Transportable Change Lists? At times, especially during the trial and error of development in the IB-Repository, I do not like having a bunch of transportable change lists created. I end up deleting them manually since I always do initial transports of the entire SWCV after I am done.
In the past I have turned off the change lists by SWCV when using CMS for transports (config exists in Administration section of Integration Builder). Is there something like this for CTS?

This change did not resolve my issue (and we bounced the system to make sure it took effect).
If anyone knows of anything else, please chime in.
When I make a change in IB-Repository, then go to the "Change Lists" tab and activate the change, a "Transportable" change list automatically generates. I would like that turned off and I will only make transports when I am ready.
Thanks

Getting Transport Request List from Clients

Hi,
I need to fetch all the transport request list which exist in other clients from development client. Is there any function module to fetch the data.
Can someone provide me the code so that it will be useful for coding in my program.
People will be rewarded for the solution which helps me a lot.
Thanks,
Jyothi

Hi,
You will like the french comment
*   Procédure P_FIND_DATA.                                             *
form p_find_data.
data : it_request     type tmsiqreqs ,
         it_tmp_request type tmsiqreqs with header line ,
         it_e070        type sorted table of e070
                             with header line
                             with unique key trkorr .
data : begin of it_trfunction occurs 10 ,
           domvalue_l type domvalue_l ,
           ddtext     type val_text ,
         end   of it_trfunction ,
         begin of it_trstatus occurs 10 ,
           domvalue_l type domvalue_l ,
           ddtext     type val_text ,
         end   of it_trstatus ,
         begin of it_trimpflg occurs 10 ,
           domvalue_l type domvalue_l ,
           ddtext     type val_text ,
         end   of it_trimpflg .
* Recherche des données sur le système C27.
call function 'TMS_UIQ_IQD_READ_QUEUE'
    exporting
      iv_system               = 'C27'
      iv_domain               = 'DOMAIN_D27'
    importing
      et_requests             = it_request.
it_tmp_request[] = it_request[].
loop at it_tmp_request
       where owner in s_bname
       and   trkorr in s_trkorr.
    move-corresponding it_tmp_request to it_data.
    move : it_tmp_request-sysnam to it_data-csysnam ,
           it_tmp_request-impflg to it_data-cimpflg ,
           it_tmp_request-maxrc to it_data-cmaxrc .
    append it_data.
    clear it_data.
endloop.
* Tri.
sort it_data.
* Recherche des données sur le système P27.
refresh : it_tmp_request, it_request.
call function 'TMS_UIQ_IQD_READ_QUEUE'
    exporting
      iv_system               = 'P27'
      iv_domain               = 'DOMAIN_D27'
    importing
      et_requests             = it_request.
it_tmp_request[] = it_request[].
loop at it_tmp_request
       where owner in s_bname
       and   trkorr in s_trkorr.
    read table it_data
         with key trkorr = it_tmp_request-trkorr.
    if sy-subrc eq space.
      move : it_tmp_request-sysnam to it_data-psysnam ,
             it_tmp_request-impflg to it_data-pimpflg ,
             it_tmp_request-maxrc to it_data-pmaxrc .
      modify it_data
             transporting : psysnam pimpflg pmaxrc
             where trkorr = it_tmp_request-trkorr.
    else.
      move-corresponding it_tmp_request to it_data.
      move : it_tmp_request-sysnam to it_data-psysnam ,
             it_tmp_request-impflg to it_data-pimpflg ,
             it_tmp_request-maxrc to it_data-pmaxrc .
      append it_data.
      clear it_data.
    endif.
endloop.
* Recherche des données générales sur l'ordre.
select trkorr trfunction trstatus as4user as4date as4time
         into corresponding fields of table it_e070
         from e070
         where as4user in s_bname
         and   strkorr eq space
         and   trkorr in s_trkorr.
* Recherches des textes desciptifs.
select domvalue_l ddtext
         into table it_trfunction
         from dd07t
         where domname    eq 'TRFUNCTION'
         and   ddlanguage eq sy-langu.
select domvalue_l ddtext
         into table it_trstatus
         from dd07t
         where domname    eq 'TRSTATUS'
         and   ddlanguage eq sy-langu.
select domvalue_l ddtext
         into table it_trimpflg
         from dd07t
         where domname    eq 'TRTPIMPFLG'
         and   ddlanguage eq sy-langu.
* Enregistre les informations dans la table IT_DATA.
loop at it_data.
    read table it_e070
         with key trkorr = it_data-trkorr.
    if sy-subrc eq space.
*     Recherche libelle du code TRFUNCTION.
      read table it_trfunction
           with key domvalue_l = it_e070-trfunction.
      if sy-subrc eq space.
        move it_trfunction-ddtext to it_data-trfunctiont.
      endif.
*     Recherche libelle du code TRSTATUS.
      read table it_trstatus
           with key domvalue_l = it_e070-trstatus.
      if sy-subrc eq space.
        move it_trstatus-ddtext to it_data-trstatust.
      endif.
*     Recherche libelle du code CIMPFLG.
      read table it_trimpflg
           with key domvalue_l = it_data-cimpflg.
      if sy-subrc eq space.
        move it_trimpflg-ddtext to it_data-cimpflgt.
      endif.
*     Recherche libelle du code PIMPFLG.
      read table it_trimpflg
           with key domvalue_l = it_data-pimpflg.
      if sy-subrc eq space.
        move it_trimpflg-ddtext to it_data-pimpflgt.
      endif.
      move-corresponding it_e070 to it_data.
      modify it_data.
      delete it_e070
             where trkorr = it_data-trkorr.
    endif.
endloop.
* Ajoute les ordres qui n'ont pas encore été liberrés.
loop at it_e070.
    clear it_data.
    move-corresponding it_e070 to it_data.
*   Recherche libelle du code TRFUNCTION.
    read table it_trfunction
         with key domvalue_l = it_e070-trfunction.
    if sy-subrc eq space.
      move it_trfunction-ddtext to it_data-trfunctiont.
    endif.
*   Recherche libelle du code TRSTATUS.
    read table it_trstatus
         with key domvalue_l = it_e070-trstatus.
    if sy-subrc eq space.
      move it_trstatus-ddtext to it_data-trstatust.
    endif.
*   Recherche libelle du code CIMPFLG.
    read table it_trimpflg
         with key domvalue_l = it_data-cimpflg.
    if sy-subrc eq space.
      move it_trimpflg-ddtext to it_data-cimpflgt.
    endif.
*   Recherche libelle du code PIMPFLG.
    read table it_trimpflg
         with key domvalue_l = it_data-pimpflg.
    if sy-subrc eq space.
      move it_trimpflg-ddtext to it_data-pimpflgt.
    endif.
    append it_data.
endloop.
sort it_data.
* Recherche des libellés des ordres.
loop at it_data.
    select single as4text
           into it_data-as4text
           from e07t
           where trkorr eq it_data-trkorr
           and   langu eq sy-langu.
    if sy-subrc eq space.
      modify it_data.
    endif.
endloop.
* Modifie les codes pour positionner les icones.
loop at it_data.
    case it_data-cmaxrc.
      when '    '.
        move '@EB@' to it_data-cmaxrc.
      when '0000'.
        move '@08@' to it_data-cmaxrc.
      when '0004'.
        move '@09@' to it_data-cmaxrc.
      when others.
        move '@0A@' to it_data-cmaxrc.
    endcase.
    case it_data-pmaxrc.
      when '    '.
        move '@EB@' to it_data-pmaxrc.
      when '0000'.
        move '@08@' to it_data-pmaxrc.
      when '0004'.
        move '@09@' to it_data-pmaxrc.
      when others.
        move '@0A@' to it_data-pmaxrc.
    endcase.
    modify it_data.
endloop.
endform.                     " P_FIND_DATA

Unable see the transported changes.

Hi All,
There is change in my source IDOC structure for mapping.
In my dev system i have imported this changed idoc and made the mapping changes
I have transported these objects from DEV to Test server
The changed mapping got successfully transorted from DEV to Test server
For changed IDOC the changes were successfully imported from DEV to Test server. But there was problem for assembly. The problem was with Version conflicts for this IDOC.
What I did is, I deleted this IDOC definition from test server and retransported the IDOC from DEV to Test server
This time the IDOC got successfully imported and exported in test server. SWC got assembled successfully.
But the IDOC did not get created.
I can see the IDOC in transported list but cant see the IDOC structure created in test server under Imported objects.
Please suggest.
Regards,
Sheetal

Hi Sheetal.
You can see in change List in Test Server if there are objects stopped (not active) there. Or maybe you have to retransport all objects. If In the Test Server shows the conflits message, you must accept this updates (accept button new objects).
Regards.
Bruno

No Transport option in Change list tab

Hello All,
The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Am I missing any configuration? Kindly suggest
Regards,
Anand

Hi,
In XI (in IR & ID) you will not find the transport option in tab change list. If you what to tansport any namespace or any particular object then put the mouse on that and right click then press Export and follow the instructins. Finally it will create a .tpz file. You have to take the help of BASIS team to tranport this file, once the file will be trasported into Quality or Production then you can Improt it from menu Tools --> Import desigen objects..
Regards,
Sarvesh

Transporting change request

hi SD experts,
I really appreciate if anyone tell me abt Transporting change request concept
and do sd consultant hve any role in this scenario.
Thanx in advance
regards
vaseem

Transport request is not generated for Master Data. For eg: Customer Master, Material Master, price master, etc.
Benefit of Transport Request:
SAP Landscape normally has 3- Tier system:
Development Server - Where customization takes place. TRansport request is generated at this level & then first transported to Quality server for testing whether it meets the requirement or not. Once the requirement is met in Quality server then Request is transported from Development Server to Production Server (Actual / Live System)
Quality Server - Mainly useful for testing.
Production Server Actual / Live server, where the real transactions are created & posted.
Regards,
Rajesh Banka

Version of the object using Transport Wizard and Change Lists

Hello experts,
When using the Transport Wizard, after selecting --> "Individual Objects" --> "Add Objects from Change Lists", do you know if the version of the object selected
- is the last one (aka, the version right after the last activation of the object)
- or the version of the object at the time it was added to the Change List?
Thank you very much!

Go to T-code SE10, go to the transport request you created. See all objects that are attached to your request. Now you would need to revert all the objects attached to its previous version(as you recieved before changes).
Go to each object, by double clicking on it, go to utilities - version management and see the relevant version just prior to your change. Uncheck the checkbox which is checked on current version and check the previous version checkbox and find button on toolbar which says retrieve version, click on it and once that version is retrieved go to change mode on that object and generate or activate the same.

When trying to sign in with 2 different apple id's I get a message saying "unknown error". I succeed to sign in directly from my iphone though. What has changed?

When trying to sign in with 2 different apple id's that i use for year now, I get a message saying "unknown error". I succeed in signing in directly from my iphone though. What has changed?

You will need to contact iTunes support.

How can I change the source file so it is direct from external hard drive?

I am trying to make a movie on imovie of a snowboarding trip that I went on, there is around 80 to 100 gig of mp4 movies that will not fit on my computer that I have stored on my external harddrive. I had the movie half finished then found I could do no more as I had no space left in my mac. I had to delete everything and start again but I'm not doing this until I can find a way of changing the source file so I can take them direct from my external hard drive as to not use up all my computers available space. I have moved imovie to my external hard drive but it still tries to read from a movie file on my mac, how can I change that so it will read from a source file on my external hard drive, is it possible?? Can someone help me??

Hi Bengt, Thanks for your input, much appreciated.
I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

My iphone 4 is not being detected by any of my computers and not charging when connected to any computer. It will, however, charge to the car or wall. The only change that I can think of is that I downloaded a podcast from itunes directly from my phone. I've since deleted this podcast with no luck. I've restarted both the phone and the computer, still no luck. One computer is running Vista and the other Windows 7, both have the latest Itunes Update. Anyone have a fix for this?

You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
This is NOT Apple ,Apple do not read nor do they therefore respond
So if you would like to wind your neck in ........................
try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

I can't email a photo directly from iPhoto. First, I only have two "themes" to choose from instead of 8, and when prompted to fill in the "to" and "from", the "from" box has "MobileMe" already in it, and I can't get rid of or change it. I have OSXLion

I can't email a photo directly from iPhoto. First, I only have two "themes" to choose from instead of 8, and when prompted to fill in the "to" and "from", the "from" box has "MobileMe" already in it, and I can't get rid of or change it. I have OSXLion

I understand, as that was the place I would change it before 8.3 but now that option of Mail Days to Sync is not available? Any idea why that would be?

After transporting changes are not happening

Hi All,
As per the requirement we need a change in the pricing procedure ZJEXPS
(Export Sales Switch). We made the changes in transaction code V/08.
But after transporting the request to quality server, changes are not reflecting there.
I had checked the request number all the tasks are there and transport was completed with warning.
our consultant created another request and then also after transporting changes are not reflecting.
How it is happening particular to this request?
How to trace this? Kindly suggest me.
(Ours is two system landscape with master client 009 and quality client 007.I am trying to transport to 007)
Regards,
Nagendra.

Hi
Check the import logs. If you are getting warnings that original objects cannot be replaced. You need to import the change request in unconditional mode. During performing imports select option, overwrite originals.
Some times the requests contain the objects, which are original to the target system, e.g SAP standard objects.
Check if this could help you.
Regards
Rahul

Not option for Transport under the tab Change list in both IR and ID

Hello All,
The option transport is missing in tab change list for both IR and ID. We have created the track, maintained the systems in the NWDI but still no luck. We have also included the SC SAP-INTDIR 3.0 for both the tracks (i.e.) IR and ID. Also we are running a seperate NWDI server for CMS and the SLD is with the XI production server.
Am I missing any configuration? Kindly suggest
Regards,
Anand

Hi Anand
Please check if the following link is of some good to you:
http://help.sap.com/saphelp_nw70/helpdata/EN/45/f9f02cf3e41ecce10000000a1553f7/frameset.htm
Also check for steps mentioned here:
http://www.saptechies.com/minisap-610-installation/
I hope it helps
Regards
Chen

Transport change request

Hello Team,
I have a transport change request that needs to be imported to production. It has the changes to userexit MV45AFZZ. Can i import it to production system with users on the system or it has to be done when there are no users on the system. Please advice.
Tthanks.
Regards,
Baabi

Sales documents in a production system get created in various ways - through online users, through interfaces with other systems like EDI, Web or any other system or through any background process.
When source code in common includes like MV45AFZZ etc changes it needs recompiling of the whole main program SAPMV45A again. If changes happen while documents are getting created it may cause instability or even run time termination.
Better to choose a silent time when users or other processes are not creating any sales document (inquiries, quotations, orders, contracts, credit/debit memos etc)

Transporting directly from ID transporting from transport change list

Similar Messages

Maybe you are looking for