Transfer hosting payment to client

I am trying to take a site off of my 5 free webbasics sites on my creative cloud account.
Using the admin console, I went to site settings--> site management--> upgrade now.
I selected 'invoice my customer directly' and filled out all required info.
When I submitted, the screen flashed and I received no confirmation of success.
I can't see anywhere in the admin console that the client is now paying for it.
I have tried doing this on many browsers (IE, Firefox, Chrome). It works no where.
What can I do to transfer hosting payment to my client?
Thanks!
Neal

Hi,
Please reach out to BC Accounts as there may be an issue with the site you are attempting to upgrade.
- http://www.businesscatalyst.com/contact
Provide the site details and the details shared in this thread so they can assist you further.
Kind regards,
-Sidney

Similar Messages

Successful transfer of hosting fee to client?

I am trying to take a site off of my 5 free webbasics sites on my creative cloud account.
Using the admin console, I went to site settings--> site management--> upgrade now.
I selected 'invoice my customer directly' and filled out all required info.
When I submitted, the screen flashed and I received no confirmation of success.
I can't see anywhere in the admin console that the client is now paying for it.
I have tried doing this on many browsers (IE, Firefox, Chrome). It works no where.
What can I do to transfer hosting payment to my client?
Thanks!
Neal

I believe this forum post is a duplicate of http://forums.adobe.com/message/5591597.
As per Sidney's reply, please submit a ticket as it sounds like our Accounts team will need to look into this.

Cancel or Delete a Bank Transfer Incoming Payment.

Please advise how I can cancel a ( bank transfer) incoming payment. Our client has entered two incoming payments which are both bank transfers. One needs to be canceled. Thank you for your help in advance.

Darpal,
Bring up the Incoming Payment
Right Click
Choose "Cancel"
This will cancel the incoming payment.

How to transfer passwords encrypted from client to server?

Hello dear community,
I have already some experience with programming and did a lot of web-software, but I never was facing the problem that passwords are transfered as plain text to the server when using a login-form.
For my front-end, I use Java ServerFaces 2.0.
I read a lot of hints like using a javascript based MD5 library and send the password as MD5 but this can be sniffed an decrypted easily.
Do you have some hints to easily implement a secure transfer of values from client to server?
best regards,
Berni

goose_fraba wrote:
and how to do that? how to configure etc.?Server specific. Read your server's documentation.

Re: (forte-users) Delays in data transfer..server-to-client

I would try using DOM (distributed object manager) traces. trc:do:20 will
give you information on each messages sent from and received by the
partition. Levels are 1, 2, 5, 7, and 8, and trc:do:*:8 is very
verbose. trc:do:20:1 may tell you what you want to know. trc:do:1:1 will
give you a basic 1-line-per DOM event trace that may also be all you need.
Communications manager traces will tell you about network and socket-level
activity, but not about the sizes of the messages themselves. In addition,
the operating system makes decisions about physical packet size and
send/receive timing, so CM activities only generally map to actual network
activity.
-tdc
iPlanet Integration Server Engineering
At 09:24 AM 5/1/01 -0700, you wrote:
All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in
order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are
requesting
the data size and packet information. I did not see what I am looking for
using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10
flag, but
Forte' indicates that this flag is very verbose, the systems group hates
it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.

Jeff,
If the object you are passing does not require changes made to it in the
server partition to be returned, pass the object as copy input (pass by
value not reference). If it is necessary to pass the object as input, try
to pass only the attributes that are required to the remote partition
instead of the whole object.
Input/Output is normaly used with scalar variables. When a scalar is passed
to a remote partition, if the value is changed in that partition, the value
is not returned to the calling partition unless Input/Output is used.
Input/Output should not be used for object type parameters, if you need to
pass a reference, use Input only. If you can pass by value, use Copy Input.
You will notice a huge difference in performance changing from Input to Copy
input when passing large objects.
Hope this helps,
Travis Foote
Fortedeveloper.com Inc.
----- Original Message -----
From: "Jeff Bennett" <[email protected]>
To: <[email protected]>
Sent: Tuesday, May 01, 2001 9:24 AM
Subject: (forte-users) Delays in data transfer.. server-to-client
>
All,
We are experiencing delays in object transfer between server and client.The
delays are longer with large objects (a single object with an array ofobjects
that reflect the rows returned in a database) than small (ie: 10 rows vs400).
>
Does anyone have any (actual) experience using the various Forte' flags inorder
to show the actual size of the object/packets being passed between theserver
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6seconds or
so. The round trip fare however from the time the client makes the SOcall to
the time that it completes is in the 25-30 second range, leaving roughly20-25
seconds unaccounted for. I have brought in the network guys who arerequesting
the data size and packet information. I did not see what I am looking forusing
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10flag, but
Forte' indicates that this flag is very verbose, the systems group hatesit when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: [email protected]

Delays in data transfer.. server-to-client

All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are requesting
the data size and packet information. I did not see what I am looking for using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10 flag, but
Forte' indicates that this flag is very verbose, the systems group hates it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff

All,
We are experiencing delays in object transfer between server and client. The
delays are longer with large objects (a single object with an array of objects
that reflect the rows returned in a database) than small (ie: 10 rows vs 400).
Does anyone have any (actual) experience using the various Forte' flags in order
to show the actual size of the object/packets being passed between the server
and client?
We are using input/output between client and server, input on all the SO's
within a partition. Response on the server side is good, roughly 6 seconds or
so. The round trip fare however from the time the client makes the SO call to
the time that it completes is in the 25-30 second range, leaving roughly 20-25
seconds unaccounted for. I have brought in the network guys who are requesting
the data size and packet information. I did not see what I am looking for using
the trc:cm:*:4 and trc:cm:*:8 flags. I will be trying the trc:cm:*:10 flag, but
Forte' indicates that this flag is very verbose, the systems group hates it when
I use up all of THEIR disk space!
Any ideas would be appreciated as always.
-jeff

How to define a separate virtual host for each client in SICF

Hello,
We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
2. Create a new virtual host in SICF assigning the profile paramter to it
3. Assign a client to this virtual host
My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
Anyone can help me? Thanks a lot in advance!
Best Regards
Di Li

Hi Srikishan,
thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
Regards
Di

How to define a separate virtual host for each client in ICF for WebDynpro

Hi,
We have an ERP system with multiple clients running on it. The WebDynpro ABAP applications once developed are available on all clients, as standard. However, this is not our desired behavior. We want:
1. The WebDynpro ABAP applications should be managed separately in SICF depending on the client
2. The URL for accessing the WebDynpro application should have a own host name for each client. e.g.
A WebDynpro application on client 100 should be accessed by http://host1:5000/sap/bc/... and the same application on client 200 should be accessed by http://host2:5000/sap/bc/...
After a while researching I find out that creating a virtual host for each client in SICF would be a possible solution to fulfill the above mentioned requirments:
1. Set the profile parameter is/HTTP/virt_host_* with corresponding host name and port number
2. Create a new virtual host in SICF assigning the profile paramter to it
3. Assign a client to this virtual host
My question is how to specify a client to a virtual host? I didn't find any possibilities in SICF!
Anyone can help me? Thanks a lot in advance!
Best Regards
Di Li

Hi Srikishan,
thanks for your reply. Your suggested way is certainly a potential, and also my preferred option for solving the multiple-client-capable URL access to WebDynpro / BSP applications.
However, for some reasons, based on the customer requirements, the client should not be visible in the URL. The URL for accessing the WebDynpro / BSP applications on different client should have different host name, as if they are different companies. Besides that, we want to manage each WebDynpro / BSP application on different clients in SICF separately.
Therefore, at least on my opinion, we need to introduce a virtual host for each client in SICF. But how do I make it happen?
Regards
Di

Advance payment from clients Model 340 ( report RFIDESM340)

Hi gurus.
i have a problem with my tax declaration for Spain ( model 340)
The thing is that i would like to declarate in this report my advance payment from clients.
The correct form to do it in Spain in to declarate them at the date of receiving in positive and at the date of the delivery of the machine to declarate the in negative.
How could i solve my problem?
Thnaks in advanced!

Hi Nerea,
Are you using down payment or milestone billing? If the answer is yes, see note 213852 - Analysis of down payment processing with FI as a checklist.
I hope this helps you
Regards
Eduardo

How to transfer custom BC to client's environmemt

Hello
I created custom BC at my environment. How I can transfer this BC to client'a environment?
BI7.0

Hi,
SAP reference:
*Transporting Roles :*
You can use the BW Transport Connection to transport roles that are delivered with SAP Business Content and customer-own roles.
Roles that are delivered within SAP Business Content are found in the namespace SAP_BW_. If you want to modify the delivered roles, you first need to copy them to namespace SAP_BWC_ in the Business Content function area of the Administrator Workbench
Procedure:
1.      Gather together the roles that you want to transport, as you would for a standard transport.
2.      Select the roles, and choose Transport Objects. The Prompt for Transport Requests dialog box appears.
3.      Write the objects to an existing transport request or create a new transport request. Choose Continue.
pls chk this link:under transports
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Regards
CSM Reddy

Set NAT's Default Host based on client ID, not IP

Hello,
Is there a way to set the NAT's default host to a "Client ID" instead of an internal IP address? I need this because often my PC's IP change and I need to update it manually in the Airport, causing it to restart and breaking all internet in my house.
What happened to "it just works" ?

Hi!
In Airport Utility you have to go to Network tab. There you can add a DHCP reserve for your computer based on it's MAC adress. This way your computer will be always in the same IP.

VOFM - Formulas Problem : Can't transfer in to target Client.

I just created a formulas in Tcode VOFM, and inserted some code , and actived it. ,
GRPZE GRPNO AKTIV KAPPL
ADAT 905 X
But I can't transfer it into target client.
The transfer log is ok .
But the target client still don't have formula 905 .
Is there any special step for the transfer of formulas ?
Many many thanks .
The following is my Request ! Is there any problem ?
DR1K903890 ZZFZWANG
DR1K903891 ZZFZWANG
Program
RV45C905
DR1K903892 ZZFZWANG
Table contents
TFRM
TFRMT

Hi Eswar ;
Done. I have found the formula in the target client.
I think the problem is simple .
The request was released and posted 3 days ago from dev system ,and It just appeared in the target client. But I found the transfer log is ok in DEV system.
Thanks you very very much, Eswar .
Best Regards
Fred

Hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

hello - I have done a series of edits on premiere cs6 and now need to transfer info to the client overseas so I have to transfer the rushes and would like to know what I need to provide ( list...) regarding the edit done on the CS6 version - thank you

>I have managed to download the footage onto Picture Motion Browser
Isn't Picture Motion Browser available for Windows only? If so, why are you posting in an Final Cut Express forum? My apologies if I'm incorrect.
-DH

How can I transfer sapscript from one client to another

Please tell me the steps , how can I <b>transfer</b> SAPscript from one client to another (like DEV Client to Test Client)?

Hi,
Utilities --> Copy from client.
If you have to copy from once system to another use Program RSTXSCRP
Regards,
Satish
Message was edited by:
Satish Panakala

Copy transfer structure transfer rules from one client to other client

Hi
Our R3 client 100 is mapped to BW client 100.
R3 client 100 is source system in BW.
As the master data is created by users in R3 client 200 we want to get the data from client 200 to BW. We dont want to replicate each datasource and do all stuff form scratch for client 200.
Now the question is as we need to create transfer rules, transfer structure for all master data objects for client 200 in BW.
1. Going to create R3 200 client in BW.--this is possible.
2.Like create a transport connection in BW for client 200 for all master data infoobjects transfer rules transfer structure,process chain, infopackages..etc
3.Do the source system mapping for new client 200.
4.and then execute the process chain..
What are the best ways to achieve this.
creating all transfer structure and transfer rules only for those we are loading daily ..rather than all active ones.. How can I get the list of that master data that is loading daily.. and how easily can I create transfer structure..etc dependent objects in one go than manually.
Any help or thoughts are appreciated..
can anyone throw some light please....

Hi,
BW is not client dependent!!! When you sign on to BW, you have the client required. However, this field does not appear in any table (master data, ODS, cubes, whatever).
This means that a same BW server with a single client can have multiple R/3 connections (for multiple R/3 clients).
The database do not care about the client in BW. The data will be consolidated.
So, you do not need any new client in BW, just two R/3 connections for your two clients.
Regards,

Transfer hosting payment to client

Similar Messages

Maybe you are looking for