Transfer item category from order to DO

Hello,
I like to clarify a sentence regarding the above mentioned. The context is in Order-Related DO copy controls.
"For delivery items that are dependent on the order type, you cannot transfer any item categories from the order. For the delivery items, item category determination occurs in the delivery."
Reasons for clarification:
1. cannot understand what is meant by cannot transfer item categories from Order type to DO. What situation is this describing?
regards
Pascal

It means delivery items entered manually the ITC is determined by the DO eg. DLN.
message closed *

Similar Messages

  • COPA : Drive Item Category from billing doc. / without sales order

    Dear All ,
    I need to drive item category directly from billing document ( billing without sales order - POS inbound doc. )
    i tried to drive it from table VBRP but the derivation failed as table VBRP need the billing doc. number & i can't get it from COPA
    POS does not create any sales order , the in coming inbound doc. create billing directly ( billing type : FP  ).
    Edited by: Ahmed Hassan on May 25, 2011 2:28 PM

    Hi Jat
    This is not the screen I  am looking for .Please go to condition tab and look for Analysis .Let me know on what excess you are looking system to find your pricing .
      Below are are reference for u.
    Regards

  • Deriving/ change the item category from handling unit

    Hi SAP GURUS,
    In vl01n I want to derive the item category based on the handling unit. Hnadling unit is derived from the payment terms.
    Please let me know the required configuration or the development for this.
    Thanks

    i need ur help regarding the Sales order item category redetermination.
             we are having two item categories YNAE and YNAG and it contain schedule  line categories CP and CB ( i.e for item category  YNAE schedule line category is CP and 
             for item category  YNAG schedule line category is CB), for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
             For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
             Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG
             which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and  it is working fine .
             But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule on SAVE and its delivary dates are also not getting determined properly. If press the option ATP check at the schedule line level than very things will getting corrected in the order.
    i am using UPDKZ = U  in both xvbap and xvbep for changes
    I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
    Regards,
    Vaddepally Manoj

  • Exclude a General Item Category from rebate processing

    Is it possible to exclude a General Item Cateogory from rebate processing?
    We have a "non-stock" item category that we want to set as "non relevant" for rebate processing,  but I don't know where/how in configuration to do this.....Can anyone tell me if this is possible, and if so what do I do to make this exclusion.

    The other option would be for that item category in VOV7, dont maintain any value against the field "Pricing".
    G. Lakshmipathi

  • Transfer product category from catalog to SRM with 2 BE systems

    Hello experts,
    We are having an issue when transfering products from the SRM-MDM Catalog though OCI, since we have an SRM extended classic scenario connected to 2 backend systems.
    When the information is downloaded to SRM, the product category is changed and a "default" is assigned.
    SAP has confirmed this issue happens because there are 2 entries in table COMM_CATEGORY for this value (even though they are clearly differentiated by backend system).
    In our case, let's say Product Category "OS" (Office Supplies) exists in both backend systems, and it seems the system only searches for "OS" instead of doing a link to the logical system somehow.
    How can I implement BADI BBP_CATALOG_TRANSFER in order for the system to use the right Product Category? Should I map one the backend system in one of the custom fields or is ir possible to somehow get the backend system in some other way?
    Regards,
    Gilberto Gallardo

    Hi Gilberto,
    You should use the BBP_CATALOG_TRANSFER Badi to also define the relevent category GUID during transfer, in this way you can make the category unique and the default will not be selected.
    Regards,
    Jason

  • VA02 - transfer packing propsal from order to delivery and shipment

    hey ,
    how can i transfer the packing propsal in VA02 to delivery and shipment ?
    is there any copy control for this ?
    Regards
    ASA

    Hi Asa,
    You have to use some ABAP code (copy routine) to achieve this...
    SAP online help:
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/65/79f328a70111d2b44e006094b9b9dd/frameset.htm
    Packing proposals in sales orders and scheduling agreements
    It is possible to enter packing proposals in sales orders and scheduling agreements. These specifications automatically lead to a packing proposal in the delivery if a special data transfer routine is maintained in Customizing for copying control between the sales documents and the delivery. The packing proposal can be changed in the delivery. It is also possible to pack the delivery according to the packing proposal in the preceding document by using the Use proposal function in delivery processing.
    Define the data transfer routine:
    SPRO > LE > Shipping > Copy Control > Define FORM Routines for Data Transfers (menu > Data Transfer > Handling Units)
    Set the routine in copy control
    SPRO > LE > Shipping > Copy Control > Specify Copy Control For Deliveries (see field: V_TVCPLAK-GRUVS)
    Reagrds,
    Csaba

  • Function module of querying item category in sales order generating

    Hi everyone,
    would you please help to tell me which function module can fetch the item category in sales order generation?
    any help will be appreciate.
    Thanks.
    Eric

    Hi Eric,
    When we create a sales order with VA01 and enter in a material the system gets the item category from the following function module:
    Main Program     SAPFV45P
    Source code of   FV45PF0V_VBAP-PSTYV_PRUEFEN
      CALL FUNCTION 'RV_VBAP_PSTYV_DETERMINE'
        EXPORTING
          T184_AUART   = TVAK-AUART
          T184_MTPOS   = MAAPV-MTPOS
          T184_UEPST   = HVBAP-PSTYV
          T184_VWPOS   = T184_VWPOS
          VBAP_PSTYV_I = VBAP-PSTYV
        IMPORTING
          VBAP_PSTYV   = VBAP-PSTYV.
    VBAP-PSTYV will contain your item category.
    I hope this helps.
    Best regards,
    Ian Kehoe

  • Item Category check on Order Level

    Dear Friends!
    I want to restrict the item category on order level or disable the fields so that, no one can change the item category.
    Please share your experience!
    Regards
    Anwer Waseem

    Hello Anwar,
    The Item category is determined using certain criteria defined in the transaction code VOV4. Here maintain the sales document for which you want a particular item category, Item category group from the material master and the item category that you need in the sales order. DO NOT maintain anything in the manual item category filed. If this is maintained then the user will be able to change the item category at the sales order level.
    Hope this will help you.
    Regards
    Amol D

  • Item category group for Sales of Nonstock Item with Order Specific Procurem

    What will be the item category & group for the material for Sales of Nonstock Item with Order Specific Procurement.So that purchase requestation is created

    Hi
    As of my Understanding  this a scenario of THIRD PARTY SALE WITH SHIPMENT  where delivery will be created . Addition to the previous setting few more changes that need to be accomodated like it has to be delivery related billing - A for item category
    The indicator 'E' will make sure the Stock will be procured only against the particular sale order and it will be delivered only against this sales order. Apart from this there are few more thing need to be done with the Schedule line level
    You need to give the movement type 601, item relevant for delivery need to be checked, order type from the MM side need to be assigned, item category from MM and Account assignment group from MM, all these need to to be maintianed in Schedule line level.
    Infact why not TAS , we can use TAN , or ZTAN itself But as per the scenario we need to do the changes as required.
    Doing all this we can process this order.
    Thanks.................Rishi

  • Order-related billing for item category TAN

    Hi All,
    How can I make item category TAN order related-billing document?
    I already changed the settings for TAN:
    Billing Relevance - B (Relevant for order-related billing)
    And maintained the copy control between sales document and billing document for item category TAN:
    Copying requirements: 002 (Item/Order Related)
    Data VBRK/VBRP:      001 (Invoice Split - Sample)
    But when i create the billing document, it is still showing that the item is not relevant for billing.
    Delivery document has already been created for this item. Am I missing something?
    Thanks,
    Olyn

    hi,
    pl enter the billing doc type in the field for order related billing in the sales order document type overview.
    2. there might be billing block at sales document header level or u might have checked billing block at item category TAN,
    CHEERS

  • MD04: Unable to see Purchase Orders with Item Category S

    Hi,
    Whenever we create Purchase Orders with Item Category S (3rd party), they are not visible in MD04 Stock Requirements list.
    Is there anyway we can get the Item category S Orders to be displayed in the MD04 list?

    Hi,
    I am unable to see Third party POs with open quantity also.
    If I create a PO with blank item category (i,e to stock, it will show in MD04)
    but if i create PO with item category S (it does not show in MD04)
    Can you suggest how we can get item category S POs to be displayed in MD04

  • Utilizing item category ALEN - Creation of PO is not auto generated

    All,
    I am utilizing item category ALEN during my sales order creation process.  ALEN is set up with "create purchase order automatically" flag.  I am utilzing schedule line CB and I have maintained the order type NB, item category is 0 and acct. assign category is M.  When I save the sales order, the purchase requisition is being created, but no purchase order.  In fact, it doesn't seem to be even pulling against the data maintained in OVX5 (See below).  I have read OSS note 332475 and I have followed those instructions, but my PO is not being generated.
    One other question - when the ALE data is input for the sales organization (t-code OVX5), what have others input when the vendor, purchasing org and plant can vary (meaning, at times we transfer from plant A to plant B; then for the same sales organization, we transfer from plant B to plant A.  Maintaining just one vendor against the same sales organization does not make sense to me as it will change depending upon the sourcing and receiving plants for the same sales org.
    I have performed a search in OSS on Third Party Order Processing when it relates to individual purchase orders and how to properly configure when using ALEN and TAB - very little information to be found.  I can find a great deal of information on third party processing when it relates to the utilization of TAS and ALES item category.
    Any insights or areas to check would be very greatful. 
    Regards,
    Sandy

    All,
    This issue has been resolved internally.  I had to set the CB schedule line to using "7" stock transfer item category .. then apply a note to address an error message (note 883133).
    Regards,
    Sandy

  • Required a Exit/Badi when creating a PO in Item Category Level

    Dear Experts,
                         I want a Exit/Badi when creating a Standard Purchase Order in item Category level
    when i am giving item Category as L (Subcontracting) Component Over view will have the material that material should come and sit into the item level .
    Rewarded If it is Useful.

    Hi,
    check these...
    Enhancement/ Business Add-in            Description
    Enhancement
    MEQUERY1                                Enhancement to Document Overview ME21N/ME51N
    MEVME001                                WE default quantity calc. and over/ underdelivery tolerance
    MM06E001                                User exits for EDI inbound and outbound purchasing documents
    MM06E003                                Number range and document number
    MM06E004                                Control import data screens in purchase order
    MM06E005                                Customer fields in purchasing document
    MM06E007                                Change document for requisitions upon conversion into PO
    MM06E008                                Monitoring of contr. target value in case of release orders
    MM06E009                                Relevant texts for "Texts exist" indicator
    MM06E010                                Field selection for vendor address
    MMAL0001                                ALE source list distribution: Outbound processing
    MMAL0002                                ALE source list distribution: Inbound processing
    MMAL0003                                ALE purcasing info record distribution: Outbound processing
    MMAL0004                                ALE purchasing info record distribution: Inbound processing
    MMDA0001                                Default delivery addresses
    MMFAB001                                User exit for generation of release order
    MRFLB001                                Control Items for Contract Release Order
    MELAB001                                Gen. forecast delivery schedules: Transfer schedule implem.
    AMPL0001                                User subscreen for additional data on AMPL
    LMEDR001                                Enhancements to print program
    LMELA002                                Adopt batch no. from shipping notification when posting a GR
    LMELA010                                Inbound shipping notification: Transfer item data from IDOC
    LMEQR001                                User exit for source determination
    LMEXF001                                Conditions in Purchasing Documents Without Invoice Receipt
    LWSUS001                                Customer-Specific Source Determination in Retail
    M06B0001                                Role determination for purchase requisition release
    M06B0002                                Changes to comm. structure for purchase requisition release
    MEFLD004                                Determine earliest delivery date f. check w. GR (only PO)
    MEETA001                                Define schedule line type (backlog, immed. req., preview)
    ME590001                                Grouping of requsitions for PO split in ME59
    M06E0005                                Role determination for release of purchasing documents
    M06E0004                                Changes to communication structure for release purch. doc.
    M06B0005                                Changes to comm. structure for overall release of requisn.
    M06B0004                                Number range and document number
    M06B0003                                Number range and document number
    Business Add-in
    ME_PROCESS_PO                           Enhancements for Processing Enjoy Purchase Order: Intern.
    ME_PROCESS_COMP                         Processing of Component Default Data at Time of GR: Customer
    ME_PO_SC_SRV                            BAdI: Service Tab Page for Subcontracting
    ME_PO_PRICING_CUST                      Enhancements to Price Determination: Customer
    ME_PO_PRICING                           Enhancements to Price Determination: Internal
    ME_INFOREC_SEND                         Capture/Send Purchase Info Record Changes - Internal Use
    ME_HOLD_PO                              Hold Enjoy Purchase Orders: Activation/Deactivation
    ME_GUI_PO_CUST                          Customer's Own Screens in Enjoy Purchase Order
    ME_FIELDSTATUS_STOCK                    FM Account Assignment Behavior for Stock PR/PO
    ME_DP_CLEARING                          Clearing (Offsetting) of Down Payments and Payment Requests
    ME_DEFINE_CALCTYPE                      Control of Pricing Type: Additional Fields
    ME_COMMTMNT_REQ_RE_C                    Check of Commitment Relevance of Purchase Requisitions
    ME_COMMTMNT_REQ_RELE                    Check of Commitment Relevance of Purchase Requisitions
    ME_PROCESS_PO_CUST                      Enhancements for Processing Enjoy Purchase Order: Customer
    SMOD_MRFLB001                           Control Items for Contract Release Order
    MM_EDI_DESADV_IN                        Supplementation of Delivery Interface from Purchase Order
    MM_DELIVERY_ADDR_SAP                    Determination of Delivery Address
    ME_WRF_STD_DNG                          PO Controlling Reminder: Extension to Standard Reminder
    ME_TRIGGER_ATP                          Triggers New ATP for Changes in EKKO, EKPO, EKPV
    ME_TRF_RULE_CUST_OFF                    BADI for Deactivation of Field T161V-REVFE
    ME_TAX_FROM_ADDRESS                     Tax jurisdiction code taken from address
    ME_REQ_POSTED                           Purchase Requisition Posted
    ME_REQ_OI_EXT                           Commitment Update in the Case of External Requisitions
    ME_RELEASE_CREATE                       BAdI: Release Creation for Sched.Agrmts with Release Docu.
    ME_PURCHDOC_POSTED                      Purchasing Document Posted
    ME_PROCESS_REQ_CUST                     Enhancements for Processing Enjoy PReqs: Customer
    ME_PROCESS_REQ                          Enhancements for Processing Enjoy PReqs: Internal
    ME_COMMTMNT_PO_REL_C                    Check for Commitment-Relevance of Purchase Orders
    ME_CCP_BESWK_AUTH_CH                    BAdI for authorization checks for procuring plant
    ME_CCP_ACTIVE_CHECK                     BAdI to check whether CCP process is active
    ME_BSART_DET                            Change document type for automatically generated POs
    ME_BAPI_PR_CREATE_02
    ME_BAPI_PR_CREATE_01
    ME_BAPI_PO_CREATE_02
    ME_BAPI_PO_CREATE_01
    ME_BADI_DISPLAY_DOC                     BAdI for Internal Control of Transaction to be Invoked
    ME_ACTV_CANCEL_PO                       BAdI for Activating the Cancel Function at Header Level
    MEGUI_LAYOUT                            BAdI for Enjoy Purchasing GUI
    EXTENSION_US_TAXES                      Extended Tax Calculation with Additional Data
    ARC_MM_EKKO_WRITE                       BAdI: Enhancement of Scope of Archiving (MM_EKKO)
    ARC_MM_EKKO_CHECK                       BAdI: Enhancement of Archivability Check (MM_EKKO)
    ME_CCP_DEL_DURATION                     Calc. of Delivery Duration in CCP Process (Not in Standard)
    ME_COMMTMNT_PO_RELEV                    Check for Commitment-Relevance of Purchase Orders
    ME_COMMITMENT_STO_CH                    BadI for checking if commitments for STOs are active
    ME_COMMITMENT_RETURN                    Commitment for return item
    ME_CIP_REF_CHAR                         Enables Reference Characteristics in Purchasing
    ME_CIP_ALLOW_CHANGE                     Configuration in Purchasing: Changeability Control
    ME_CIN_MM06EFKO                         Copy PO data for use by Country version India
    ME_CIN_LEINRF2V                         BADI for LEINRF03 excise_invoice_details
    ME_CIN_LEINRF2R                         BADI for CIN India - Delivery charges
    ME_CHECK_SOURCES                        Additional Checks in Source Determination/Checking
    ME_CHECK_OA                             Check BAdI for Contracts
    ME_CHECK_ALL_ITEMS                      Run Through Items Again in the Event of Changes in EKKO
    ME_CHANGE_OUTTAB                        Enrich ALV Output Table in Purchasing
    ME_CHANGE_CHARACTER                     Customer-Specific Characteristics for Product Allocation
    No.of Exits:         35
    No.of BADis:         55
    Arunima

  • Automatic item category determination for STO

    there are 2 item categories for document type UB.One blank and one U.I want item category U to get populated while creating the Stock transfer order.How is it possible.

    Hi,
    Item category U has to be deleted form SAP Configuration.
    Go to SPRO -> Material Management -.> Purchasing -> Purchase order -> Define document type
    Select the document type UB and double click on 'Allowed Item category'. Delete the Blank Item Category from there and save.
    Now the system will give Item category U by default for order type UB.
    Regards

  • Availability check problem - with item category(TAN and TANN)

    Hi All,
    We have a problem with the availability check in the standard order. Suppose if I give the item category as TAN, the availabilty check is green for that line item. If I change the item category from TAN to TANN, then the availabilty check is red.
    How Item categories influence the availability check? Is availability check also depend on customer?
    Thanks & Regards,
    Anil.

    Hi ,
    please check in this path.
    Customer Relationship Management>Basic Functions>Availability Check>Assign ATP Profile to Item Category
    In this step you assign the ATP profile to an item category:
    1. Choose the relevant item category.
    2. Enter the name of the ATP profile in the ATP profile field.
    If this field is empty,  no availability check is carried out.
    ATP profile-
    1. A key that is assigned to the item category of a sales transaction item to control whether availability check takes place for this item.
    2. If availability check is carried out in SAP Advanced Planner and Optimizer (SAP APO), the name of the requirements profile in SAP APO is used for the ATP profile in CRM Online to carry out the following functions in SAP APO:
    -ATP check
    -Transfer of requirements
    -Delivery scheduling
    -Transportation scheduling
    Hope it will useful.
    thanks
    Hemant ghiya

Maybe you are looking for