Transform.colorTransform remove animation of mc from timeline

I have problem I have animation of movie clip in timeline, this animation is stopped on first frame. When I change color of movie clip - by transform.colorTransform and then i wanna star the timeline animation The animation of movie clip is removed.
I supposed that using of transform class remove every tween ,even tween on timeline. Is possible to cancle removing of animation and keep colorTransform???
Test fla is here:
http://www.mnozina.cz/airie/test.fla
Thanx a lot
Airie

The answer to this is simple,
wrap your timeline with another clip, and apply the colorTransform to that clip.

Similar Messages

  • Not able to remove the ABAP code from Transformation

    Hello Experts,
    We have transformation for DSO in that for one infoobject, field routine is written, Break Point is hard coded there and it's move to production. Now we are trying to remove that break point from development and then move it production.
    we are doing following activity to remove the break point.
    1. Open the transformation.
    2. Open the field routine.
    3. Going to ABAP code in field  routine.
    4. Remove the hard coded Break Point from ABAP code.
    5. Saving the code.
    6. It's taking to again filed routine window.
    7. We close the window and activate the transformation.
    8. When again check the ABAP code in field routine then it shows hard coded Break Point again.
    9. Not able to remove the hard coded break point.
    Can anyone know how to do this.
    Help will be appreciated.
    Thanks

    Hi,
    As pointed above, after point 6 don't simply close the window but click on Transfer Value and then activate your transformation. Refresh the system and check again.
    Regards,
    Arminder

  • [svn:fx-trunk] 8149: Remove dependency on UIComponent from mx.geom. Transform.

    Revision: 8149
    Author:   [email protected]
    Date:     2009-06-23 17:50:21 -0700 (Tue, 23 Jun 2009)
    Log Message:
    Remove dependency on UIComponent from mx.geom.Transform. This class is used by the Flex Component Kit, and cannot drag in UIComponent and its dependencies.
    Build new .mxp file with these changes.
    Bugs: SDK-21831
    QE Notes: None
    Doc Notes: None
    Reviewer: Jason
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-21831
    Modified Paths:
        flex/sdk/trunk/frameworks/flash-integration/FlexComponentKit.mxp
        flex/sdk/trunk/frameworks/projects/framework/src/mx/geom/Transform.as

    I had downloaded it for test, and requested for evaluation license...
    But I haven't got license, and also I am not able to find Flash Builder Plugins from HFCD site....
    I think those plugins are removed from site....
    Please help me, if anyone have those plugins...

  • Animated gif's from unsaved file?

    I used to be able to create animated gif's easily from unsaved files. I would simply select all the layers I wanted to use and process them.
    After upgrading to CS6, I'm totally lost. I've followed half a dozen tutorials, but nothing works. The only way I can even load a frame into the Windows Timeline feature is to first save several images from my unsaved file, then reload them by choosing File > Scripts > Load Files into Stacks. But even then I can't find a Make Frames from Layers option when I click the down arrow on the right side of the palette.
    Is there a simple way to create animated gif's from layers in an unsaved file on CS6, or do I need to reinstall my older Photoshop version in order to created animations?
    Thanks.

    Yes, I clicked Frame Animation Mode, but that's as far as I can get. It doesn't work the same as my older version of Photoshop. The only buttons that appear to function on the left side of the palette are "Split at playhead" and "Select a transition," and they actually don't do anything.
    The tutorials tell me to click the down arrow on the right side of the palette and choose "Make Frames from Layers," but that choice isn't listed. The choices that are listed include "Loop Playback" and "Allow Frame Skipping."
    I've tried several tutorials and have experimented with just about every button and arrow I can find, but I can't get any farther than the image you posted.

  • How can i remove a hybrid mbr from my system drive so that Efi booted windows will install.

    Hi,
    i have just clean installed OSX lion on a freshly wiped drive in my macbook pro, using a bootable lion installer usb i used disk utility to partition my drive into a mac and a windows partition under the GPT/GUID partition scheme, i then proceeded to install lion onto the mac partition, and completed the set up, All Good...
    so i plug in my Windows 8 EFI Boot USB stick (Notice, EFI boot here, NOT BIOS EMULATION BOOT), shutdown and power on the mac and proceed to the boot picker by holding option, So far so good, the usb key is recognised and the system boots into the Windows Setup in EFI mode, Enter product key, accept terms and so on, Now i select my Windows partition and windows Says That it cant install to Partition 4 (EFI Partiton, OSX Lion, Lion recovery, Windows), It says that it can only install to a GPT / GUID based disk as expected...
    Why is there a protective MBR on my drive when i didnt add one, and i have not even touched bootcamp assistant...
    How can i remove this Protective MBR from my drive so that my disk is PURE GPT so windows can install?
    hours of googling has turned up nothing...
    System:
    Macbook Pro 13 inch Mid 2009
    Mac os: OSX Lion
    Version of windows trying to install: Windows 8 Release Preview 64 bit in EFI Mode

    Alexander, I would like to apologize for the TERRIBLE answers you have been given so far.  I too had this question, and so here is what my thoughts are, as maybe they might provide insight in leading you towards the answer.
    I am a *nix user in general, and thus own a mac and a thinkpad.  In fact I just got my thinkpad not too long ago.  As such, I transfered my faster hard drive to my faster computer, which made logcal sense to me.  Ergo, I moved my Mac drive to my lenovo.  On this drive I have a hybrid mbr which is no longer needed.  So my thoughts are this:
    From what I gather, the UEFI standard indicates that there is to be a protective MBR on all GPT systems.  This is so that when you use programs that are not GPT aware, they will see a presumably "full" drive and not think that they have the right to destroy your existing data in what it thinks is free space.  For instance, fdisk or other MBR only partitioning systems.  Thus, if your system has only a MBR with a single EE partition, it would be my guess that it was in fact not put there by installing Windows, but rather for the protection of your system. 
    If you are in my situation, where you do indeed have a hybrid MBR with written out partitions, it would be my guess that the only way to rid yourself of it is to do it manually.  The way I would recommend, is using gdisk (gpt fdisk).  It is command line only, but the syntax is pretty easy:
    $ sudo gdisk /dev/disk0
    Assuming you are using your mac partition and your primary hdd is disk0.  That will put you into an interactive session of gdisk.  Enter "?" for command options.  What you need is the "recovery and transformation" section which is the "r" I think.  From there I would say you probably want to create a new hybrid mbr (you will be using this to delete it).  When it asks you for the partitions you would like to include, just hit enter.  It should then ask you if you would like to create a protective entry for the remainder of the empty space.  This is what you want so tell it to do that.  After you are done, "w" will write and exit.  You may want to first use the "p" to print and ensure that you have what you want.  You can proabably check your work by using fdisk as so:
    $ sudo fdisk -l /dev/disk0
    I hope this helps you, and if you find that there is a better way, I hope you might enlighten this thread. 
    Cheers!
    PS The command examples, the $ is to indicate it is a bash/shell command as a non-root user, do not include it in the command.

  • How do I do to add and remove Shape3D objects dynamically from TransfGroup?

    Hi, everyone,
    How do I do to add and remove Shape3D objects dynamically from TransformGroup?
    I have added two Shape3D objects in the TransformGroup and I wanted to remove one of it to add another. But, the following exception occurs when I try to use �removeChild� :
    �Exception in thread "AWT-EventQueue-0" javax.media.j3d.RestrictedAccessException: Group: only a BranchGroup node may be removed at javax.media.j3d.Group.removeChild(Group.java:345)�.
    Why can I add Shape3D objects and I can�t remove them? Do I need to add Shape3D object in the BranchGroup and work only with the BranchGroup? If I do, I think this isn�t a good solution for the scene graph, because for each Shape3D object I will always have to use an associated BranchGroup.
    Below, following the code:
    // The constructor �
    Shape3D shapeA = new Shape3D(geometry, appearance);
    shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
    shapeA.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
    shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
    shapeA.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
    Shape3D shapeB = new Shape3D(geometry, appearance);
    shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
    shapeB.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
    shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
    shapeB.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
    BranchGroup bg = new BranchGroup();
    bg.setCapability(ALLOW_CHILDREN_READ);
    bg.setCapability(ALLOW_CHILDREN_WRITE);
    bg.setCapability(ALLOW_CHILDREN_EXTEND);
    TransformGroup tg = new TransformGroup();
    tg.setCapability(TransformGroup.ALLOW_TRANSFORM_WRITE);
    tg.setCapability(TransformGroup.ALLOW_TRANSFORM_READ);
    tg.setCapability(TransformGroup.ALLOW_CHILDREN_READ);
    tg.setCapability(TransformGroup.ALLOW_CHILDREN_WRITE);
    bg.addChild(tg);
    tg.addChild(shapeA);
    tg.addChild(shapeB);
    // The method that removes the shapeB and adds a new shapeC �
    Shape3D shapeC = new Shape3D(geometry, appearance);
    shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_READ);
    shapeC.setCapability(Shape3D.ALLOW_GEOMETRY_WRITE);
    shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_READ);
    shapeC.setCapability(Shape3D.ALLOW_APPEARANCE_WRITE);
    tg.removeChild(shapeB);
    tg.addChild(shapeC);Thanks a lot.
    aads

    �Exception in thread "AWT-EventQueue-0"
    javax.media.j3d.RestrictedAccessException: Group:
    only a BranchGroup node may be removed I would think that this would give you your answer -
    Put a branch group between the transform and the shape. Then it can be removed.
    Another thing you could try: This doesn't actually remove the shape, but at least causes it to hide. If you set the capabilities, I think you can write the appearance of the shapes. So, when you want to remove one of them, write an invisible appearance to it.

  • Removing a quote sign from data transfer

    Is it possible to remove specific characters while transferring data from the PSA table to subsequent data targets?
    Maybe there a BW formula that enables this to happen?
    In my case, we have created a generic extractor to load statistical data from a BW table into a DSO.  We need to remove the quote  signs from the transfer of data because the data is failing to activate in the DSO.
    We want to avoid resorting to ABAP if possible.  Nor do I want to modify the list of approved symbols.

    Hi,
    If you know the target field where you want to remove quote then you can write routine in the transformation .
    You can use field level routine to achive this.
    Hope this will help you..
    Thanks,
    Jitendra

  • REMOVING IPSEC VPN CONFIG FROM PIX 6.3 FIREWALL

    Hey,
    we have pix 6.3 serving as internet firewall and we are int process of replacing it with new ASA Device. currently there are several site to site and remote vpn are configured for access purposes. 
    i tried to remove one site2site ipsec vpn from pix and it starts acting like a loop generating the same error with qty that processor got 100% CPU, couldn't logged in through normal ssh so i connected via console and place back the isakmp and crypto map commands back in and the error stops.
    My purpose of this question is that how can i remove vpn config from pix without generating any error is there any formal process or order of removing rules from pix or we can do it one by one no order is required.
    MY PROCESS OF REMOVING CONFIG:
    REMOVE THE ACCESS-LIST INSIDEOUT AND OUTSIDE IN COMMANDS 
    REMOVE THE OBJECTS AND OBJECTS GROUPS
    REMOVE THE VPN DEFINED ACCESS-LIST FOR INTERESTING TRAFFIC
    REMOVE CRYPTO MAP TRANSFORM-SET
    REMOVE ISAKMP-POLICY
    REMOVE CRYPTO MAP 
    WE DO USE ISAKMP SHARED KAY MECHANISM "I DID NOT REMOVE THAT "
    BUT AS SOON AS I REMOVE THE CRYPTO MAP FROM THE PIX I GOT THIS ERROR
    IPSEC(crypto_map_check): crypto map XYZ 20 incomplete.  No peer or access-list specified.
    20 IS THE ISAKMP POLICY NUMBER & Peer and Access-list was removed from pix
    any help would great
    regards

    Hi
    You could do either of 2 things.
    1) Enable NAT-Traversal on your ASA
    2) Add the following on your pix :
    fixup protocol esp-ike
    This allows one IPSEC connection to run through PAT.
    HTH
    Jon

  • Layer disappeared from timeline

    I'm creating some banners with Edge Animate for the first time.
    I started with the biggest one, now I need to create some more downscaled versions.
    Clearly the easiest and fastes way is to duplicate the edge project and modify the layers size position etc...
    Duplicating the project folder and changing the file name didn't work for me (gave error "edge can't read the html file"), so I managed to do it with "save as" and changing the "project1.an" name to a new one in a clean folder. When opened, Edge creates all the assets referencing the new name.
    Everything  ok until here, but then I noticed that the top layer "link" (it was a hidden clickable div with the banner link) has disappeared from timeline, but it's still present in the "elements" tab.
    The link was still working, then after a couple of cmd+return it disappeared also from the stage.
    I created a new rectangular div with the tool, but the new one is also not present in the timeline but only in the "elements" tab.
    Now I'm worried that this could cause problems on publishing or future edits. Am I doing something wrong?
    Thanks for your help.

    Never mind, after this post I already found the answer.
    I had checked without noticing the button at the bottom of timeline "Only Show Animated Elements".
    Unchecking all the layers were there.
    Hope this can help if anyone has accidentally the same problem!

  • Why you remove the bone tool from adobe flash cc

    Hi,
    I wonder why you remove the bone tool from flash cc . it was a very useful tool for animation. I hope that you fix this problem and return it back.

    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests

  • Best way to remove the color blue from this?

    Trying RGB Curves and Three-Way Color Corrector, but I can't seem to remove the color blue from the cutting tool in the screenshot.
    In photoshop, I could use hue / saturation and adjust only the blues, is that an option in Premiere?

    I've had good luck with Change Color in Premiere Pro, as mention above:
    Go to the Effects Pane > Video Effects > Color Correction > Change Color and apply the Change Color effect to your clip.
    Use the eyedropper to select the color in the shot you want to modify, using Tolerance and Softness to help select the color.
    Then modify the color using the transform settings.
    MtD

  • How can we remove the following zeros from quantity field ?

    Hi All.
    how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
    eg:getting output zqty = 2.000
    but i need           zqty = 2.
    help me to reslove this issue.
    Regards.
    jay

    Hi,
      While populating the field catlog do the following thing to   avoid zeros.
      wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
      wa_fieldcat-fieldname = 'FWAER'.
      wa_fieldcat-seltext_l = text-023.
      wa_fieldcat-no_zero = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR  wa_fieldcat.
    Thanks,
    Khushbu.

  • How do I remove credit card info from iTunes Store account?

    How do I remove credit card information from my iTunes account?

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on an iOS device (iPad, iPhone or iPod Touch) then you could try tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and selecting 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918

  • How do I remove credit card information from iTunes account?

    How do I remove credit card information from iTunes account?

    If you have an unpaid balance or payment due, you can't select None as your payment type.
    To see which order you need to pay for, view your purchase history.
    When you sign in to the store, you may see a message that there was a billing issue with your last order.
    Click the Billing Info button to see the order.

  • Can't remove my credit card from account.

    Why i can't remove my credit card from my account. when i remove credit card (select none)already after abt 5-10 min i check my account again my creditcardd will be appear. I try to remove from PC and on my iphone.

    Answered here:
    https://discussions.apple.com/message/24655077#24655077
    So, either do as directed, or don't get anything from the iTunes/app store.

Maybe you are looking for