Transition Conflict Message When Rippling

I've got a rough cut laid out, and when I attempt to ripple some clips, I get a mesage like: Transition Confilct on A5. Well, A5 (and A6) contains .caf audio that is completely independent of the clip on V1 that I'm trying to ripple. Roll works fine, but that's not what I need. Also, I can use the select tool to shorten the clip, but obviously that leaves a gap that I don't want. Any ideas what causes this bug?
Also, on some of the clips, instead of a Transition Conflict, I'll get a Clip Collision error...
Message was edited by: dmchord

FCP makes it difficult to go out of sync.. it' not a bug, it's a feature actually.
Any time you attempt to shorten a video clip, you must also shorten the audio tracks or past that change the sequence will be out of sync.
If you don't care about that, just lock the audio tracks and then perform the ripple.
Jerry

Similar Messages

  • Transition Conflict on VI When I Delete A 5 Second Sound Effect ?

    I inserted a Cartoon Boing sound effect all by itself on A3/A4 in my HDV project.
    When I decided to delete it (successfully) I got a warning - "Transition Conflict on V1".
    I am not doing anything with V1 and this solitary sound effect is not connected with anything else.
    Why the warning?
    Sorry! I have just realised that I am editing HDV natively in FCP 6.0.3 and have posted this in the wrong forum - but no doubt this warning applies equally to FCE and FCP.
    Message was edited by: Ian R. Brown

    hey Ian
    As you've noted, the issue is related to the different commands represented by the Forward Delete and Backspace Delete keys ... the Forward Delete is a "Ripple" Delete .. the Backspace Delete is a "Lift" Delete.
    In this instance, when you perform a ripple delete of a clip on your audio track, then FCP wants to keep everything sync'd up across all tracks ... but it cant because there are clips in the way on V1. hence the warning that the operation would cause a clip collision
    Make sense?
    Andy

  • I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any

    I have received this error message when trying to send a comment to a blog : ERROR: Could not read CAPTCHA cookie. Make sure you have cookies enabled and not blocking in your web browser settings. Or another plugin is conflicting. See plugin FAQ., can any...
    Only found one question similar and NO ANSWER to it.

    Same problem here...nothing in my settings have changed since the upgrade and I've checked my cookie settings and they allow 3rd party cookies. What's up Mozilla? I've been faithful to you for years and you let me down now?

  • This is an message when I open up CS4 in Illustrator.  "Some plugins in additional plugins folder are conflicting with application or user plugins.  It will skip loading plugins from additional plug-ins folder?  What does this mean and how can I fix it.

    This is an message when I open up CS4 in Illustrator.  "Some plugins in additional plugins folder are conflicting with application or user plugins.  It will skip loading plugins from additional plug-ins folder?  What does this mean and how can I fix it?

    Thanks Larry.  I thought so.  I will do this weekend.  Again, I appreciate your help.
    Trying to get updated software – I am not a fan of the cloud stuff.  Nothing I can do about it.
    Thanks again Larry!

  • Looking for some help with an error message when exporting master file. I'm stuck and would even pay to get this sorted out!

    Hey guys, I'm really in a bind here and need some urgent help tonite. I would even be willing to pay for some actual help and not some vague information that i may not be able to understand if we could do something via skype or some other way that would be much quicker than a message board. Of course I have to have the project done by tomorow . so I'm new to fcpx, but have succesfully exported 2 other projects. I've also ran into this predicament before (error message not allowing me complete export) and have been able to solve that by converting the files i imported off my camera (canon g20) to a different file type (prores).
    so where I'm at now: i have a 13 min short, all shot on my canon g20, imported and converted to prores422 with the brorsoft video converter with all the shots in a single event in fcpx. i'm using fcpx version 10.0.08. I have one main video track in my timeline that is completely full of very fast edits. (all quick 2-5 second clips, sped up shots in 2x, 4x, or 8x, tons of transitions, titles, and a little fx. theres 2 audio tracks, one is narration/speech and the other is an ongoing music track that constantly ducks everytime the subject speaks (tons of ducks/edits). Have you seen mtv cribs? Well i filmed an EXACT replica. So If you've seen one of those episodes, its literally the same exact same thing. I have all of my work completed, everything has been fully rendered, and i have it exactly as I want it.
    I'm including all this information in case it may help. my successful projects ive exported in the past were rather simple, and this one is very complex and full of edits. here is what it looks like in the timeline:
    Ive tried exporting the master file using almost all the different ways with no luck. My primary objective is to get it on youtube by any means by tommorow for a showing to a potential buyer (long story) and so I've been told using the h.264 is the best format for that. This, along with the other methods give me the same error message:
    It think it gives this error message when i reach 24% everytime during export.
    So first of all, what is that error message? Do i need to be concerned about the specifics of it, or is there something major that I'm missing? Like i said, i dont care how, but I need to get this video up on youtube tonite for an important viewing tomorrow. Conceptually, I think if i can figure this one out I shouldnt have any more trouble in the future doing something so basic, yet critical, such as exporting my 40+ hours of work for someone to see.
    anyway, I apologize in advance for my lack of knowledge with this software, and for my extremely long winded question which will probably have the opposite effect for me as most wont want to take the time to read all this, BUT i figured if i was as thorough as possible it might help actually getting a concrete answer, instead of a "read the manual, exporting is on page 37." or "use the share button on the right of the timeline then just click export master file and it will work everytime."
    Cheers everybody, and thank you. Like i said if someone is up, and willing to talk via skype, phone, messanger or any other method that works for you I would be totally down and will compensate you generously for your time. thanks again.
    Taphabit

    boom! that advice was correct and worked. i was able to export the full project as a quicktime movie and it can be uploaded to youtube.
    NOTE, theres is definately quite a few noticeable audio glitches/lags/pops that werent there before doing this. I believe, and will test to make sure, that having a project such as this one needs to render before exporting. I'm not sure if the advice requires the project to be unrendered before exporting for a specific reason, because if it will export fine after rendering the project that's the way to go. like i said the edited version i have in my timeline plays back perfectly but this exported version has quite a few noticeable audio glitches (a few video glitches too). I'm going to retry doing the first few steps of your advice, but then at the end render, then export and compare the results...
    OK, so this leads to a big question, Is this something that is standard for everyone when trying to export? If its not, what causes this error?
    is there any way of preemptively avoiding it in future projects?
    thanks again, and hopefully this information will help others as exporting seem to be one of the biggest problems in fcpx. any word on a new patch or firmware update?

  • I keep getting the follow error messages when I try to sign into iTunes store or redeem a song code: We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again

    I keep getting the following error messages on my Mac when I try to redeem a song code: "We could not complete your iTunes store request. The network connection could not be established. There was an error in the iTunes store, please try again later."  and then, "We could not complete your iTunes Store request. An unknown error occurred (-50)."

    Hello, constance132. 
    Thank you for visiting Apple Support Communities. 
    Here are some troubleshooting steps that I could recommend when receiving error -50. 
    "Error -50," "-5000," "8003," "8008," or "-42023"
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Cheers,
    Jason H. 

  • Error message when trying to salve pages or numbers documents

    All of a sudden i get the following message when trying to save newly created pages or numbers documents into my documents folder
    "The file “Untitled.numbers-tef” couldn’t be opened". THis is for doocuments created from scratch.
    Can anyone please help?
    I'm relatively new to new to the iMac and OS so not sure if something has been set up incorrectly - but it's been working OK for approx 3 months.
    Any help greatly appreciated.

    I spoke too soon. I began a new movie and imported
    photo clips, which rendered just fine. However, I
    can drag transitions in between the photos, but they
    simply will not render. Everything was just swell
    until yesterday afternoon when I changed the length
    of the clips so that there would be enough room for
    the transition. I tried to do multiple clips at the
    same time, but they never rendered. It was then when
    I was unable to add any more transitions.
    Aha! That may be different problem. There's a bug in iMovie that makes it impossible to update image clips after you empty the iMovie trash. If you imported the image with the Ken Burns checkbox ON, the bug can affect you later.
    It's possible, I suppose, that this bug not only prevented you from updating the clips to a new duration, but made it impossible to add the transition to the clips.
    After importing your images with the Ken Burns checkbox on, you might try dragging the source image out of the iMovie trash, described here:
    http://discussions.apple.com/thread.jspa?messageID=2139814&#2139814
    Karl

  • Error message when using Spry Data set with XML

    Hi,
    I have what i see as a big problem, might just be me being
    dumm, but here we go.
    When I try to use the feature of spry XML Data Set and insert
    spry table I get error message when trying it in IE 7.
    There are even a problem when I use fireworks automated slide
    show function, where you can choose to use the Spry/XML gallery
    feature.
    The error message I get everytime (incl the auto gallery in
    fireworks) is:
    The tag: "html" doesn't have an attribute: "xmlns:spry" in
    currently active versions.[XHTML 1.0 transitional]
    The tag: "div" doesn't have an attribute: "spry:region" in
    currently active versions.[XHTML 1.0 transitional]
    The tag: "th" doesn't have an attribute: "spry:sort" in
    currently active versions.[XHTML 1.0 transitional]
    and so on.
    What´s wrong?!

    Hello barvid,
    Ok, let's take each problem step by step:
    1. The first error you see in the browser: " Exception while
    loading ..." normally appears when you try to load files that are
    not permitted by the browser security model. This means the XML
    file you try to load is located on a different server than your
    HTML which is not allowed. The browser is not permitting to load
    any files that are not in the same domain as the current page
    because of the complex security risks. You'll have to either get
    the XML file from its original location and save it in your website
    or use a proxy on your web server that should request that file
    from the external server and send it to the browser as an XML from
    the same domain as the HTML origin.
    1.2 The "Exception while loading ..." error you see is a
    generic error and my previous advise is based on my experience. In
    case this is not your scenario you'll have to open the SpryData.js
    and around line 112 you'll see the following code:
    Spry.Debug.reportError("Exception caught while loading " +
    url + ": " + e);
    Please change this line with the following line of code:
    Spry.Debug.reportError("Exception caught while loading " +
    url + ": " + (e.message?e.message:e));
    to obtain a more verbose error message that may clarify the
    reasons of your errors.
    2. The problems you describe are not browser errors but they
    are w3c validation errors. At this point the XHTML standard allows
    every application that define custom namespace attributes to also
    link a DTD to the page so the page to continue to be valid.
    Unfortunately at this point this feature is not correctly supported
    by the FF and IE so we wrote an articles about how you should
    link
    the Spry DTD to your page so the validator understand the
    custom attributes Spry use. You'll find inside the full description
    of the problems and all the technical details you'll need to know
    to solve this issue.
    Regards,
    Cristian

  • Receiving error message when trying to open microsoft word for mac or any other microsoft office for mac application

    I am receiving an error message when trying to open any application in the Office for mac suite
    Any suggestions??

    Hello
    you can try - remove and re-install microsoft office
    you can try boot in safe mode - hold COMANDE-S at start up until see you are insafe mode then restart normaly and see if you can open word
    you can try use font book too detect font conflict / problem
    you can try use office database recover / repare program as folow , first quit ALL office application then hold ALT key and launche same time entourage or outlook and and folow software optiion for verify / reconstruct database
    HTH
    Pierre

  • I've upgraded my pc and now Im getting an error message when Im trying to sync my ipod saying I have two itunes libraries. The library thats there is only showing some songs and it's not uploading songs Ive just bought.

    I've upgraded my pc and now Im getting an error message when Im trying to sync my ipod saying I have two itunes libraries. The library thats there is only showing some songs and it's not uploading songs Ive just bought.

    You seem to have tried everything, and you say it's syncing fine on your Dad's iMac, so I assume, you have also  done a Disk Diagnostic from an earlier post by tt2 and conclude that your iPod Hardisk is good.
    You don't have to use it as a heavy paperweight, the problem is only using your Windows 7 machine for syncing.
    In your troubleshooting steps, did you try to use another High-Speed USB 2.0 port, USB controller resource are very scarce, so if you use other USB devices, while syncing your iPod, it may just freeze.
    Windows have a bad reputation for device conflict, so better don't connect other  USB devices, while syncing, better sync it while disconnected from Internet, stop antivirus just before you go to bed.
    Have a nice day!

  • Third party MIDI/Audio driver conflict message!@#@!#@

    I'm getting the "Logic Pro has detected a possible conflict between one or more third party MIDI or audio drivers" message.
    I'm running a G5 dual 2 gig, OSX 10.4.8, Logic Pro 7.2.3, Emagic AMT8 and RME DSP9652.
    When I start Logic, it hangs on "checking MIDI drivers" forever, then gives me the conflict message 4 or 5 times, then tells me MIDI services won't be available.
    I have not changed ANYTHING... it's worked fine forever. I removed the EmagicUSBMIDIDriver.plugin from the MIDI drivers folder, tried it with nothing in the folder, and same thing (I had a Yamaha MIDI driver and one from the RME, but I dumped them. It's worked fine with the additional drivers for a long time, so I doubt that's the problem). I reloaded the EmagicUSBMIDIDriver.plugin from the 7.2 installer DVD, same thing.
    Someone mentioned this problem was caused by too many devices drawing current on the USB bus, but I only have a mouse/keyboard, printer, XS Key, and a iLok for Waves on the the USB bus.
    HELP!
    Mitchell

    I have looked in Library/Audio/MIDI Drivers and there is just one file called EmagicUSBMIDIDriver.plugin - can this be causing the problem?
    Nothing on User/YourName/Library/Audio/MIDI Drivers.
    I have found 3 AVID folders on Applications:
    - Avid MetaSync Manager
    - Avid MetaSync Publisher
    - Avid_Uninstallers
    Shall I remove these?
    There is also an empty folder called Digidesign on User/Library/Audio/Plugins
    I have tried it with the M-Audio card connected and selected in Logic, and it doesn't work.

  • Outlook receiving conflict messages

    I have started to see this happen more and more.  I have users that are getting the conflict message show when a user opens up email messages.  They have to keep the item or keep all.  What would be causing the conflict.  The users in
    question are using outlook in cached mode.  We are using exchange server 2010.  I have seen this happen in outlook 2010 and 2013.
    Would the user approaching the mailbox limit cause the conflicts to happen?

    Hi,
    Please provide more details about this issue, such as, what is the error message?
    If it's about the mailbox quota, it may be caused by a corrupted .ost file. I suggest you rename the .ost file, then restart Outlook, a new .ost file will be generated and check if the problem persists.
    If it warns you the user is approaching themailbox limit, the error message may also prompt, consider to delete some unimportant items or archive some items to local.
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • User gets an Content Encoding Error message when trying to access workspace

    Hi.
    I've created a workspace and added several users to it who can access it without any issues.
    However, one specific user (Leslie Elstad - https://beehiveonline.oracle.com/teamcollab/profiles/[email protected]) can't access her workspaces. She is using Firefox on a Solaris 10 machine.
    Here is what she told me:
    "I clicked on the Start button under Team Workspaces, which took me here:
    https://beehiveonline.oracle.com/teamcollab/
    and displayed the familiar Content Encoding Error message."
    Please advise.

    Hi.
    Please let me know what is going on when we add people to a Beehive Online group (Solaris Curriculum).
    People are frequently getting this same error/message when trying to access several workspaces.
    New cases, please help me fix their access:
    [email protected] can't access https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    [email protected]: can't access: https://beehiveonline.oracle.com/teamcollab/wiki/Transition+to+Oracle+Solaris+11+Express
    Thanks.

  • What does this error message when I try to do updates mean? And how can I fix it? Thanks.   The operation couldn't be completed. (NSURLErrorDomain error -1012.)

    What does this error message when I try to do updates mean? And how can I fix it? Thanks.   (The operation couldn’t be completed. (NSURLErrorDomain error -1012.)
    James
    maverick 10.9.1

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • "Error: 3" message when I try to run Flash CS4 Pro

    I have Adobe Flash CS4 Pro installed on my Windows 8 OS, and it was working fine for a while, but all of a sudden now I get a generic error message when I try to launch the application. It gives me an "error: 3" status and tells me to restart (which I have done several times) and otherwise to contact Adobe Support, who won't help me because it's not a "current version." I have also tried to "Run As Admin."
    Very frustrated.

    Many people have had problems when they upgraded to Win8 on a machine with an existing Adobe CS installation. (Works better on a clean Win8 machine.) This could be why you're not seeing it in Add/Remove.
    Is your Flash Pro part of a CS Suite, or just a stand-alone? If part of a Suite, look for the Adobe Creative Suite listing in Add/Remove. A complete un-installation, and removal of all Adobe products, files, and folders from your machine, followed by a re-installation, might help.
    Also, Flash Pro CS4 apparently installs and uses an older version of the Flash Player (10.xx), which might create conflicts with the Flash Player's current version (11.8.800.94). Make sure to uninstall Flash Player completely before attempting CS4 Flash Pro re-installation. I got an error message upon installation, but Flash Pro still works (though I uninstalled the older version of Flash Player, so the built-in de-bugger may not function).
    You are correct: Adobe Support is generally useless, even when you have the current product. Forums and searches are usually your only recourse.

Maybe you are looking for