Transition Issue between tracks

Hello all, I'm sorry if this has been addressed elswhere, but I couldn't find this specific issue.
I've noticed in my exported videos (.mts to H264 .mp4) that I experience some artifacting on the right side of the screen when transitions such as a cross-dissolve or dip to black are applied. A thin column of a solid color (red, blue, violet) will appear on the right side of the screen for the duration of the transition. Interestingly, if the transition is between clips on the same track, there is no artifact, but if the transition is taking place between clips on two separate tracks, the colored lined appears. All the clips were shot with the same camera and imported at the same settings.
Is this a bug or is there I something I should be doing differently?
Much thanks for any help or advice.

Mine is green. This is DV pal on the timeline also visible in export mpeg2-dvd during a dip to black.
Does not do it on a single track, there must be more tracks involved.

Similar Messages

  • How to create a transition between tracks

    I have a 3 minute sequence that I would like to loop in DVDSP. I have duplicated the sequence into
    two tracks and set end jumps to ping pong between track 1 & 2. So far so good. How can I create
    a transition such as Dissolve to transition between track 1 and 2. I have set transitions but can only
    simulate a cut when looping between the tracks. Help appreciated!
    DVDSP 4.2.1

    I think DVDSP doesn't offer anything like a dissolve, so here's a suggested hack:
    In your FCP timeline, duplicate the segment so that you have three copies,
    one after the other. We'll call the three copies A, B, and C. Put the transition
    between A and B, and between B and C. Make sure that A begins appropriately
    (maybe a fade up from black), and that C ends appropriately (maybe a fade to black).
    Now export and compress each segment and include in your DVDSP project.
    Create a track in DVDSP, and decide the maximum length of time the track will run
    (this is a guesstimate). On the track's timeline, put the segments in this order:
    A B B B B B B B C, with the number of repeats determining the maximum length.
    I realize it's a hack, but it should work. When exporting from FCP, be careful
    to get the in and out points correct.

  • Is there a way to make the transition between tracks seamless on iTune purchases of through-composed music? Please advise.  Thanks

    Is there a way to make the transition between tracks seamless on iTune purchases of through-composed music? Please advise.  Thanks

    Thanks for answering Chris. You clearly have much more experience than I do in these matters, and I don't mean to challenge... but that's not been my experience. If I choose shuffle for a list of all songs and listen continuously for many hours, I really do (and will) hear repeats.

  • Cp2025n color laserjet manual duplexing side two portrait & landscape transition issue

    I regularly print the same documents. Each document has a portrait section, a landscape section, a portrait section then a landscape section, then a portrait section. I manually duplex the job (because I did not buy a duplexer and I am saving trees).
    On the first side of the page, everything works great... job runs straight through the printer then I am prompted to insert the half printed pages into tray 1 and push OK on the printer.  The first portrait section is printed. The printer stops on the first landscape page and prompts me to load paper into tray 1 (even though it is already there) and push OK again, I do so, and it proceeds till the job switches to portrait mode, prompts me to load paper into tray 1 (even though it is already there) and push OK again, I do so, and it proceeds till the job switches to landscape mode, etc... making me babysit the printer as it prints the second side of each job.
    I have multiple different print jobs with the similar layout... portrait, landscape, portrait, landscape, and finishing with portrait. All of them behave the same. The number of pages in the portrait section and landscape section vary by job and within job. The prompt from the printer is always at the transition point between portrait & landscape mode.  The printer only stops when printing side two of the page.
    I believe I am running the most current drivers and software on my PC for the printer. The update task runs regularly and is not informing me that there is new software available. The only indication of what firmware is running on the printer is this info
    Firmware Datecode: 20100512
    This strikes me as a printer driver issue... Anybody got any other ideas? Anybody noticed this same issue? Can someone from HP test this out for themselves and verify there is a problem? I have tried searching the forums but every post I have found so far is not on point.
    Thanks!

  • Why is the ipod insisting on pausing between tracks?

    My ipod 30g is pausing between tracks and there is no apparent way of altering that. This is a serious unresolved problem with the ipod which I feel needs to be discussed until Apple either recalls it or resolves the issue.
    I did a search for this topic and I found that the few discussions that existed did not get the airing they deserved before they were archived.
    If I didn't know Apple better I would think this is a cover-up. I called tech support and after I assured them that the itunes cd preference was set to no pause they had no answer but to re-install the software which would involve erasing all my content. And you know I got the "I haven't heard of this problem yet.." cliche tech response to de-emphasize a gaping disfunction.
    Yes I'm keeping my ipod but they should not have released it for market with this audio anomaly. And yes I will merge all my tracks in itunes because that pause can ruin and entire CD if there is continuous sound.
    Does anyone know if Apple is at least considering rectifying this flaw?

    The iPod has never supported gapless playback.
    You can suggest Apple add this feature here;
    http://www.apple.com/feedback/ipod.html
    It's no big conspiracy - we're not alowed to speculate here about what features Apple may or may not add in the future, so there really isn't much to talk about.

  • Gaps between tracks...

    I am an EDM DJ and there is nothing worse than listening to a set with gaps between tracks. Upon burning a cd via iTunes I make sure that the set is gapless and specify a 0 second gap between tracks. Why am I still getting gaps in the final burn?

    Actually, I have never had this problem using other burning software (windows). I seem to only have the issue when using iTunes. Obviously burning with iTunes is the way to go versus using Toast, etc...
    Any other ideas?

  • Gaps between tracks still?

    Does anyone know if Apple have addressed the gaps between tracks issue? I know you can join tracks, and that's not what I'm asking Would be great if you could listen to mix CDs properly at last....

    Someone else has asked this already, see Ryan Goshorn, "Gapless Playback on Nano?", 06:44pm Sep 8, 2005 CDT
    ...and it appears the answer is that the gaps are still there.

  • Gap between tracks

    Hi -
    I imported an album that has no gap between music tracks, but in iTunes there is now a ~1 sec gap between tracks which also copies across to my nano. Is there a way to edit/adjust these tracks so there is no gap without haing to re-rip the whole album? It is quite annoying.
    TIA,
    Charles

    I did not even realize that this issue occurred, until I was listening to Abbey Road on the IPOD. Searching for Answers it looks as though Apple needs to provide an enhancement to resolve this with an Itunes service pack and ipod firmware upgrade.
    Edited by an Apple Discussions Host

  • WaveBurner - Click and pops between tracks? Solution!

    I've been aware of the 'clicks between tracks' problems with Wave Burner, but until this last week, I hadn't had cause to master an album with cross fades for a long time. So, when at the weekend I mastered an 18 cross faded track compilation, I suddenly experienced what many users have been complaining about!
    To cut a long story short, I have the solution to get round the problem until Apple fix it with an update (hopefully soon).
    The cause of the clicks is where the purple track index pointer is placed in relation the frame rate.
    To get rid of the clicks, you need to open the audio track image in waveburner out to its maximum resolution, ie as large as it gets, and move the purple start and end points so they snap EXACTLY to the nearest frame rate, NOT between frame rates, which is where they will be when causing clicks. I must stress that you have to open out the view to it maximum, because if you don't do that, you'll think you're moving it to the frame rate, but in fact, you won't be. eg ool at the first track purple index point; it starts exactly on 00.00.00 and ends exactly on 00.02.00 (assuming a 2 second index point). All subsequent id points must be as exact as that, they cant be in between the marker points. Hope that makes sense.
    Also, If you're experiencing a 'pop' at the end of the album, then ensure that your end audio track ends on a frame rate point, and the 'pop' will be gone!
    Basically, if apple ensure that any scissor cuts in audio 'click to frame rate' then the problem will be solved. Interestingly enough though, previous versions of WB didn't click to frame rate either, so why the problem is now there, I don't know.
    I played around with this over the weekend, placing id points in cross faded tracks on six different albums, discovering clicks on all 6, then I did the above and 100% it solved the problem.
    Hope that helps users and points apple in the right direction to issue a fix quick!!

    I believe this problem is due to having the plug-in Soundflower from Cycling 74 active through an aggregate sound driver. When I changed the sound driver to another aggregate sound driver w/o Soundflower, thereby de-activating Soundflower, the problem seemed to go away. I need to do some more checking though to make sure it really is gone and it was Soundflower.

  • Media Player fades out between tracks

    The Tour Media player seems to fade out the audio between tracks on a CD.  This is kind of annoying as some CD's intentially run one track into the next.  Is there a way to change this behavior?

    Sorry, i didn't see your post and I just posted the sme issue, it is really annoying, so much so that I am considering returning my Blackberry, I thrive on the MP3 use and this is not acceptable. try as i might I cannot find a Phon e Number to call RIM tech support, so thier not alowing me contact is going to lead to the loss of a sale on this phone and any future phones that I might have purchased from them.
                               Larry

  • Temporary freeze between tracks?

    iTunes is freezing for about 30 seconds between tracks between most (not all and randomly). I have no library and am just playing stuff off my iPhone connected to iTunes. It is a fresh and updated install of 8.1. The diagnostics all come back as positive and all my other programs are responding and active during these freezes but iTunes completely freezes. I am running a Dell XPS M1710 w/ 2GB Ram and a Core 2 Duo processor, so I can't imagine it is a hardware issue. My other player (Windows media) plays the MP3s in a playlist just fine. Usually between tracks the phone will say that it is syncing and it will only say that AFTER the freeze is over which makes me think that it is not the iPhone. Is it just dome crazy iTunes bug? Should I just reinstall? Just seeing if anyone else has had that problem. Everything plays fine at home (Vista Ultimate), so I am not sure if it has to do with this install or maybe the fact that I am on a domain (XP Pro SP 3) at work? No idea.... Thanks!
    Ryan

    This exact same thing is happening to me too. At first I thought it was my external hard drive where I keep all my music was damaged, but then when I plugged my Ipod in to directly play of it, the same thing happens. Some one please help! Should I re-install Itunes?????

  • 1Frame Transitions in between Clips.

    Concerning smoothcam, I'm following the instructions on applying smoothcam filters to clips.
    I'd first export the portion of the clip that is being used, then reimporting it and placing in the timeline where it belongs.
    When I place the new clip on the track, flushed up to another clip on either side, I can't seem to get a cross dissolve transition that spans the intersection of the 2 clips. FCP wil place a 1frame transition in between the clips but not on and connecting the clips.
    What am I doing wrong?
    Thanks for any and all help
    Aloha

    You don't have enough handles.
    http://www.fcpbook.com/Effects1.html
    You needed to export with pad on either side so when you brought it back you had room for the transition overlap.

  • Is it still possible to remove pauses between tracks when ripping a CD?

    In earlier versions of iTunes, it was possible to remove pauses between tracks. Many classical CDs have long sections subdivided into separate tracks, yet those sections are meant to be heard without pauses. When a CD with those separate tracks gets ripped, there is a brief pause before the next track starts. Is it still possible to remove those pauses?

    Oops. I found the answer to this question after digging for about an hour.
    Yes, it still can rip without pauses.
    Now my issue is how to join (without pauses) music that ends on one CD and continues (without pauses) onto a second CD.
    Any know of any software that does that with MP3s?

  • Is there an issue between EXSP24mkII and MOTU Symphonic Instrument?

    I'm using Logic Express 7.2 for three large projects right now. Admittedly I'm pretty new to LE 7.2, since just recently switching over from Digital Performer.
    So, far, LE has been very stable -- UNTIL last week when I loaded in MOTU's Symphonic Instrument. Now, if I have just one or two tracks of Symphonic instrument and nothing else, I'm fine, but if I start adding tracks that have different virtual instruments on them -- say, 2 tracks of Symphonic Instrument and 2 tracks of EXSP24 mkII, then I get frequent crashes.
    The crashes occur as I record my first take on the first new track.
    I can't seem to nail down a particular sequence of events yet, although I think I might be getting pretty close to figuring it out.
    However, before I put in all the effort to figure out the bug, do you know if it's already been discovered? Are there known issues between Symphonic Instrument and Logic or MacIntels, or something?
    Thanks!

    I do have the latest version -- the one that's compatible with the MacIntels. And, when it's the only plug-in, it works great.
    Well, maybe not quite as great as EXSP24mkII, but pretty good. There are still some wierd clicks that happen during playback occasionally, but, VERY fortunately, don't happen when I bounce the tracks down.
    It doesn't seem like there's a known issue, so I'll see if I can isolate a series of actions that cause the problem. If I can nail it down, I'll let you all know.

  • Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

    We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
    We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

    Hi,
    So you have N7k acting as L3 with servers connected to 4510?.
    Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
    This will help narrow down if issue is between server to 4510 or 4510 to N7k.
    Thanks,
    Nagendra

Maybe you are looking for