Translation rule group fail

I need config a group in a translation rule and fail, any body can help me
rule 1 ^123(1-9) 3456 any subscriber
Incorrect format for Translation Match Pattern
regular expression must be of the form ^(\^)?(\+)?([0-9,ABCD.*%?#]+)$
Invalid match pattern string input ^123(1-9)

If your ver IOS is 12.2(11)T or later this will work
voice translation-rule 5000 /^123[1-9]/ /3456/ type any subscriber
show voice translation-rule 5000
Translation-rule tag: 5000
Rule 1:
Match pattern: ^123[1-9]
Replace pattern: 3456
Match type: any Replace type: subscriber
Match plan: none Replace plan: none
you can do the following to see if your rule works as expected.
test voice translation-rule 5000 1234567890
Matched with rule 1
Original number: 1234567890 Translated number: 3456567890
Original number type: none Translated number type: subscriber
Original number plan: none Translated number plan: none

Similar Messages

  • Rule Generation fails

    Hello!
    We have an issue. After installation few month ago we uploaded standard files (according to postinstall steps) and now we are trying to load modified action/permission files.
    We have a problem with Rule Generation programm. During rule generation job we have got a problem:
    "Error while executing the Job:ERROR: Risk: F001 has exceeded the maximum number of rules (46,655) that can be generated for a risk"
    According to note #1310365 on our side for F001 is all correct: F001 risk consist of two Functions - GL01 and GL02. GL01 has 168 actions, and GL02 has 56 actions, i.e. total 9408 rules (168*56). We think that it happens because we uploaded files for all systems and groups (for DEV200, PRD400and their group ERP Systems; for PRD420 and its group CUA), in this case 9408 * 5 (number of systems)=47040.
    We have tried to upload empty files (action/permission with only one string in each), we hoped that it cleaned all information, and after this we can load SoD again. But it doesn't help...
    What can we do?
    P.S. [thread |Rule Generation fails - maximum no of rules 46655; has been watched
    Regards,
    Artem

    Artem,
    After close study , i think i found some key point.
    Per SAP note 1310365, max number of risk allowed per function are
    tcodes in function1 X tcodes in func2 X 3
    per example in note
    Suppose you have a risk (P086) that includes three functions:
    MD12 with 21 actions
    BR08 with 46 actions
    TS22 with 34 actions
    This particular risk applies to three different versions of SAP, all running on your environment. In this example, P086 translates to 98,532 distinct rules.
    98,532 = 21x46x34x3
    also since you had already uploaded standard rule sets........ and when you upload modified files....... it must be containing old tcodes also........ those should be removed.
    regards,
    Surpreet

  • Business Rules login failed

    When I try to access to the Business Rules in the EAS Enterprise View (I'm logged as admin), it says
    "Business Rules Login Failed"
    If I go in Shared Services I can't provision additional roles to the admin user because the role related to Business Rules is not present.
    It seems that Business Rules is not correctly configured.
    So what I have to do?
    Thanks.

    Hi,
    1. When you login into Shared services, on left hand side ,you see User directories and Application groups.
    2. Expand "Application groups" , here do you see Business Rules.
    3. You are telling us ,after you have expanded essbase, thats not needed.
    Hope this is clear to you
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • Is it possible to filter the data in a rule group ?

    Hi !
    I'm using 3 rule groups in a sales transformation to differentiate commands, bills, and deliveries.
    I would like to know if it is possible to filter for each rule group the data by BWVORG for example ?
    Thx in advance .
    Guillaume

    As per my understanding filter at rule group is not possible.
    You can use the same at the start routine.

  • Error while creating a Rule Group

    Hi All,
    We are upgrading from 11.5.8 to 11.5.10.
    We had some customizations in 11.5.8 which we have to do in 11.5.10 as well.
    In 11.5.8, we had a custom form, which was used to add lines to already existing contracts.
    We were using Okc_Rule_Pub.create_rule_group to create rule group..
    We are facing a problem in 11.5.10 when using the same code to add lines in contracts of category "Service Agreement".
    The api Okc_Rule_Pub.create_rule_group is erroring out with message
    "Rule Groups/Rules are not allowed for this contract category."
    Any help in this regard is highly appreciated.
    Regards,
    Anas.

    Hi Anas,
    I have a similar problem with a package in which we create new contracts. It's working fine in 11.5.9, but after upgrading to 11.5.10 it does not;
    My error is : Rule &VALUE is not allowed for this contract category.
    Could be the same problem as yours..
    How did you solve it ??
    Thanks in advance for your answer.
    Regards, Bert

  • Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

    Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
    It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming: 
    Windows could not start the FLEXnet Licensing Service service on Local Computer
    Error 1068: The dependency service or group failed to start.
    I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service. 
    Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

    Hi Don1233,
    Please consider seek help at the software vendor side.
    For the services didn't start, follow the suggestions posted by Elton in the thread below:
    https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
    Best regards
    Michael Shao
    TechNet Community Support

  • Network: Unknown / The dependency service or group failed to start

    Hello, MicroSoft tech crew. I know my issue is not something new to you, there are earlier posts with similar to identical problems to mine. For a whole day I tried everything I could find on the internet to fix my issue, but nothing seemed to work.
    I cannot connect to the internet. My network and sharing center displays the following, instead of the map:
    Unknown
    The dependency service or group failed to start.
    I am running windows 7 Professional 64-bit.
    I used ESET NOD32 as antivirus. I uninstalled it the day this issue appeared.
    I have no restore point.
    Any other computer or device can successfully connect to my router.
    Re-installing a fresh copy of windows is not an option.
    These are the solutions I tried and didn't work:
     I tried restarting the router (1 minute power-off)
     I HAVE reinstalled my drivers for both LAN and WAN network cards at least twice each.
    ~ I  ran the following commands in CMD as administrator over 3 times, successfully, followed by reboot:
    * sfc /scannow
    * netsh winsock reset // netsh winsock reset catalog
    * netsh int ip reset // netsh int ip reset reset.log hit
    I have checked the following in the registry:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servicel\NlaSvc has always had full control and read permissions for both SYSTEM and Administrators.
    I replaced my nlasvc.dll file from C:\Windows\System32\ with one from another computer (and set TrustedInstaller as its owner)
    Booting in Safe mode with networking does not change this situation.
    These are some of my services. Note that I turned some of those from Manual to Automatic.
    1) COM+ Event System
    * Automatic, Started
    2) Computer browser
    * Automatic, Started
    3) DHCP Client
    * Automatic, Stopped
    * When I attempt to start this service I get this error message:
      "Windows could not start the DHCP Client Service on Local Computer."
      "Error 1186: Element not found."
    * Dependencies:
    3.1) Network Store Interface Service
    * Automatic, Started
    4) DNS Client
    * Automatic, started
    5) Network Connections
    * Automatic, Started
    6) Network Location Awareness
    * Automatic, Stopped
    * When I attempt to start this service I get this error message:
      "Windows could not start the Network Location Awareness service on Local Computer."
      "Error 1068: The dependency service or group failed to start"
    * Dependencies:
    6.1) Network Store Interface Service
    * Automatic, Started
    6.2) Remote Procedure Call (and all it depends on)
    * Automatic, Started
    7) Remote Procedure Call (RPC)
    * As stated above: Automatic, Started
    8) Server
    * Automatic, Stopped
    * When I attempt to start this service I get this error message:
      "Windows could not start the Server service on Local Computer."
      "Error 50: The request is not supported."
    * Dependencies:
    8.1) Security Accounts Manager (and the RPC)
    * Automatic, Started
    9) TCP/IP Netbios helper
    * Automatic, Started
    10) Wireless Zero Configuration (XP)
    * Nonexistent
    11) WLAN AutoConfig
    * Automatic, Started
    12) Workstation
    * Automatic, Started
    Also, my ipconfig /all looks very strange. I am not allowed to post pictures yet, but this is the image on skydrive server:
    /#cid=2168FA597AC0EAF1&id=2168FA597AC0EAF1%21107

    I follow your solution and found the
    Network Location Awareness service
    could not start.
    Then I found the solution from:
    http://mjmcfalls.wordpress.com/2012/04/07/network-location-awareness-service-terminated-with-service-specific-error-1073741288/
    by running the commands:
    net localgroup administrators localservice /add
    net localgroup administrators networkservice /add
    to add the "Localservice" user and "NetworkService" user
    to the adminstrators group.
    And the problem solved after reboot.

  • How to create rule groups strp by step-urgent

    Hi All,
    Can you please provide me the step by step procedure for creating rule groups.
    I have four date fields ina DSO which have to be mapped to a date field in cube.\
    Thanks in adavnce

    Hi
    Check this link with library with steps to create rule groups
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60e63c88-960b-2a10-9fac-a409a24476c2

  • Test voice-translation rule not working properly

    Hi all,
    I have a 15.4(1T) image I'm trying to test a voice tranlation-rule on.
    If I put in a number that doesn't match, it tells me so.  However, if I test a string that does match, I get no results at all. 
    I know the rule works as this is from our production phone system. 
    voice translation-rule 1
    rule 1 /^9\([2-9]..[2-9]......\)/ /\1/
    CTHA_2901#test voice translation-rule 1 2488900
    2488900 Didn't match with any of rules
    CTHA_2901#test voice translation-rule 1 92488900
    CTHA_2901#
    CTHA_2901#
    Has anyone run across this?  Perhaps I'm doing something wrong, or there's a software bug in this image?
    Thanks,
    Brian

    Hi Jaime,
    I hadn't, and that certainly does work.  I guess I thought I'd see a no-match message in that scenario too, but never tried it.  Thanks!

  • Rule group in sap bi

    hai to all.
    can any one give senario for creation of rule group in transformation.

    Hi Ramesh,
    Please check the below docs and help file on rule group in SAP BI
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d085fa63-f54c-2c10-b5ba-cc4ac231512b?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90754b76-bcf1-2a10-3ba7-b299b2be09f2?QuickLink=index&overridelayout=true
    http://help.sap.com/saphelp_nw70/helpdata/en/44/32cfcc613a4965e10000000a11466f/content.htm
    Hope it helps.
    Regards,
    Raghu

  • How to append calling and called number with translation rules?

    Hello,
    I have one question about digit manipulations.
    How to append calling number and called number with IOS commands?
    For example, when 123 dials 45678, translations have to be performed and the new called number to be 12345678.
    Thank you,
    I will vote this conversation.

    It is not possible with translation rules.
    However, you can do that with a TCL/IVR script.

  • ECC 6-  Table that gets updated when Currency Translation to Group Currency

    Hi All,
    I would like to know which table gets updated with the Values when we execute tcode "FAGL_FC_TRANS"?
    I would like to see the values that system posted during April 09, May09 etc for each GL that was Translated into Group Currency using the tcode.
    under SE16, i tried checking for all tables with FAGL*, but could not figure out the exact table.
    Thanks
    Vijay

    BKPF gets updated - The T Code you will in those entries in BKPF is FBB1, Business Trans. will be RFBU and Ref. Transaction will be BKPF.
    BSEG gets updated - Activity Type RFBU.  You will not see any non-zero amounts in transaction currency and local currency.  In group currency, you will see a non-zero number.
    FAGLFLEXA gets updated - Transaction RFBU, Ref. Transaction BKPF - No amounts in TC and LC.  Amount in GC.
    FAGLFLEXT gets updated - Transaction RFBU, Ref. Transaction BKPF.  Again, nothing in TSLxx and HSLxx.  Amounts in KSLxx (xx being the period in which you have posted translation).

  • Create internal order with reference - Do not copy distribution rule group

    Hi,
    I'm creating an internal order with reference to another order through tcode KO01. When i will display the new internal order, i already have distribuion rule group that was copied from the reference order. To delete the incorrect distribution rule group i execute tcode KO02, however this information do not appear in tcode KO02.
    What should be done to delete this settlement rule? I do not want to copy the settlement rules from the old internal order.
    Thanks in advance.
    Regards,
    Ana Fernandes

    Hi.
    'What should be done in order to do not copy this information when i create the internal order with reference?'
    in tcode kot2_opa do not maintain Settlement profile for Order category 3
    Also go to KOM2 and delete Settlement rule for order, from which you copying.
    'in table COBRB i can see the information however i can not delete it. The validy period is empty.'-in su53 check authority

  • Rs-ora:resource group failed to start on chosen node; it may end up failing

    I have configured two node failover cluster environment using netra a/d 1000 storage. When I try to deploy oracle server application it throws the following error
    rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
    I created metaset and gave one raw did disk to that metaset.
    I created logical hostname resource, ha-storage plus resource. Later I brought the resource group to online using following command
    #clrg online –emM rg-ora
    Later I created oracle cluster resource using following command.
    #clrs create -g rg-ora -t SUNW.oracle_server -p ORACLE_HOME=/global/oracle/product/10.2.0/db_1 -p ORACLE_SID=infra -p Alert_log_file=/global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log -p Connect_string=sysdba/dbadmin1@infra -p Resource_dependencies=rs-ora-has rs-ora
    node1 - Validation failed. ORACLE_HOME /global/oracle/product/10.2.0/db_1 does not exist
    node1 - ALERT_LOG_FILE /global/oracle/product/10.2.0/db_1/admin/infra/bdump/alert_infra.log doesn't exist
    node1 - PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/initinfra.ora nor server PARAMETER_FILE: /global/oracle/product/10.2.0/db_1/dbs/spfileinfra.ora exists
    node1 - This resource depends on a HAStoragePlus resouce that is not online on this node. Ignoring validation errors.
    rs-ora: resource group failed to start on chosen node; it may end up failing over to other node(s)
    The status of oracle resource shows as follows.
    Resource Name Node Name State Status Message
    rs-ora node1 Start failed Faulted
    I used solaris 10 update 6 patch level is Generic_137137-09, Oracle version 10.2.0, Sun clusters 3.2 update1. Following are the vfstab and /var/adm/messages of both nodes.
    Node1#grep ora /etc/vfstab
    /dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
    Node2#grep ora /etc/vfstab
    /dev/md/oradg/dsk/d300 /dev/md/oradg/rdsk/d300 /global/oracle ufs 5 no logging
    Node1#more /var/adm/messages
    Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_prenet_start> for resource <ha-
    host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
    Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
    lib/rgm/rt/hafoip/hafoip_prenet_start>:tag=<rg-ora.ha-host-1.10>: Calling security_clnt_connect(..., host=<node1>, sec_typ
    e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_prenet_start> completed successfully for
    resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
    Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_prenet_start> for resour
    ce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <1800> seconds
    Oct 17 05:19:17 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
    lib/rgm/rt/hastorageplus/hastorageplus_prenet_start>:tag=<rg-ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<tes
    tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<2>:cmd=<null>:tag=<rg-
    ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
    Oct 17 05:19:18 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
    has been suspended.
    Oct 17 05:19:20 node1 Cluster.Framework: [ID 801593 daemon.notice] stdout: becoming primary for oradg
    Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<3>:cmd=<null>:tag=<rg-
    ora.rs-ora-has.10>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<0>, ...)
    Oct 17 05:19:21 node1 Cluster.RGM.rgmd: [ID 316625 daemon.notice] Timeout monitoring on method tag <rg-ora.rs-ora-has.10>
    has been resumed.
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_prenet_start> completed successful
    ly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <1800 seconds>
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_start> for resource <ha-host-1>
    , resource group <rg-ora>, node <node1>, timeout <500> seconds
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
    lib/rgm/rt/hafoip/hafoip_start>:tag=<rg-ora.ha-host-1.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {0:WEA
    K, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_start> completed successfully for resourc
    e <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <500 seconds>
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_start> for resource <ha
    -host-1>, resource group <rg-ora>, node <node1>, timeout <300> seconds
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_start> for resource <rs-
    ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
    lib/rgm/rt/hafoip/hafoip_monitor_start>:tag=<rg-ora.ha-host-1.7>: Calling security_clnt_connect(..., host=<node1>, sec_typ
    e {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
    lib/rgm/rt/hastorageplus/hastorageplus_start>:tag=<rg-ora.rs-ora-has.0>: Calling security_clnt_connect(..., host=<node1>,
    sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_start> completed successfully for
    resource <ha-host-1>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <300 seconds>
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_start> completed successfully for
    resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_start> for resou
    rce <rs-ora-has>, resource group <rg-ora>, node <node1>, timeout <90> seconds
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/
    lib/rgm/rt/hastorageplus/hastorageplus_monitor_start>:tag=<rg-ora.rs-ora-has.7>: Calling security_clnt_connect(..., host=<tes
    tlab5>, sec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:25 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_start> completed successfu
    lly for resource <rs-ora-has>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <90 seconds>
    Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_validate> for resour
    ce <rs-ora>, resource group <rg-ora>, node <node1>, timeout <120> seconds

    Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 375444 daemon.notice] 8 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor/
    oracle_server/bin/oracle_server_validate>:tag=<rg-ora.rs-ora.2>: Calling security_clnt_connect(..., host=<node1>, sec_type
    {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_validate> completed successful
    ly for resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <120 seconds>
    Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_init> for resource <
    rs-ora>, resource group <rg-ora>, node <node1>, timeout <30> seconds
    Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
    /oracle_server/bin/oracle_server_init>:tag=<rg-ora.rs-ora.4>: Calling security_clnt_connect(..., host=<node1>, sec_type {0
    :WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:38 node1 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <bin/oracle_server_init> completed successfully f
    or resource <rs-ora>, resource group <rg-ora>, node <node1>, time used: 0% of timeout <30 seconds>
    Oct 17 05:19:38 node1 Cluster.CCR: [ID 973933 daemon.notice] resource rs-ora added.
    Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <bin/oracle_server_start> for resource
    <rs-ora>, resource group <rg-ora>, node <node1>, timeout <600> seconds
    Oct 17 05:19:39 node1 Cluster.RGM.rgmd: [ID 751138 daemon.notice] 47 fe_rpc_command: cmd_type(enum):<1>:cmd=</opt/SUNWscor
    /oracle_server/bin/oracle_server_start>:tag=<rg-ora.rs-ora.0>: Calling security_clnt_connect(..., host=<node1>, sec_type {
    0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 17 05:19:48 node1 SC[SUNWscor.oracle_server.start]:rg-ora:rs-ora: [ID 876834 daemon.error] Could not start server
    Oct 17 05:19:48 node1 Cluster.RGM.rgmd: [ID 938318 daemon.error] Method <bin/oracle_server_start> failed on resource <rs-o
    ra> in resource group <rg-ora> [exit code <1>, time used: 1% of timeout <600 seconds>]
    Node2# more /var/adm/messages
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 529407 daemon.notice] resource group rg-ora state on node node2 change to RG_PENDIN
    G_OFFLINE
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_MON_STOPP
    ING
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_MON_STOPPI
    NG
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_monitor_stop> for resource <ha-host
    -1>, resource group <rg-ora>, node <node2>, timeout <300> seconds
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_monitor_stop> for resource <
    rs-ora-has>, resource group <rg-ora>, node <node2>, timeout <90> seconds
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 268902 daemon.notice] 45 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
    rgm/rt/hafoip/hafoip_monitor_stop>:tag=<rg-ora.ha-host-1.8>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK
    , 1:STRONG, 2:DES} =<1>, ...)
    Oct 14 20:20:04 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
    rgm/rt/hastorageplus/hastorageplus_monitor_stop>:tag=<rg-ora.rs-ora-has.8>: Calling security_clnt_connect(..., host=<node2>, s
    ec_type {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_monitor_stop> completed successfully f
    or resource <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <90 seconds>
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_ONLINE_UN
    MON
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPING
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource rs-ora-has status on node node2 change to R_FM_UNKNO
    WN
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource rs-ora-has status msg on node node2 change to <Stopp
    ing>
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hastorageplus_stop> for resource <rs-ora-h
    as>, resource group <rg-ora>, node <node2>, timeout <1800> seconds
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
    rgm/rt/hastorageplus/hastorageplus_stop>:tag=<rg-ora.rs-ora-has.1>: Calling security_clnt_connect(..., host=<node2>, sec_type
    {0:WEAK, 1:STRONG, 2:DES} =<1>, ...)
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_monitor_stop> completed successfully for reso
    urce <ha-host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_ONLINE_UNM
    ON
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hastorageplus_stop> completed successfully for resou
    rce <rs-ora-has>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <1800 seconds>
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_STOPPED
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_STOPPING
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 224900 daemon.notice] launching method <hafoip_stop> for resource <ha-host-1>, res
    ource group <rg-ora>, node <node2>, timeout <300> seconds
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_UNKNOW
    N
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Stoppi
    ng>
    Oct 14 20:20:05 node2 Cluster.RGM.rgmd: [ID 510020 daemon.notice] 46 fe_rpc_command: cmd_type(enum):<1>:cmd=</usr/cluster/lib/
    rgm/rt/hafoip/hafoip_stop>:tag=<rg-ora.ha-host-1.1>: Calling security_clnt_connect(..., host=<node2>, sec_type {0:WEAK, 1:STRO
    NG, 2:DES} =<1>, ...)
    Oct 14 20:20:06 node2 ip: [ID 678092 kern.notice] TCP_IOC_ABORT_CONN: local = 192.168.032.244:0, remote = 000.000.000.000:0, s
    tart = -2, end = 6
    Oct 14 20:20:06 node2 ip: [ID 302654 kern.notice] TCP_IOC_ABORT_CONN: aborted 0 connection
    Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 784560 daemon.notice] resource ha-host-1 status on node node2 change to R_FM_OFFLIN
    E
    Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 922363 daemon.notice] resource ha-host-1 status msg on node node2 change to <Logica
    lHostname offline.>
    Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 515159 daemon.notice] method <hafoip_stop> completed successfully for resource <ha
    -host-1>, resource group <rg-ora>, node <node2>, time used: 0% of timeout <300 seconds>
    Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource ha-host-1 state on node node2 change to R_OFFLINE
    Oct 14 20:20:06 node2 Cluster.RGM.rgmd: [ID 443746 daemon.notice] resource rs-ora-has state on node node2 change to R_POSTNET_S
    TOPPING

  • Business rule is failed.

    Hi All
    we have an issue with business rules.When they run it from planning web, running fine.But when we attached it to form and run it from smartview with option run on save we are getting messegae "Business rule is failed."Not all of RTP parameters are set".
    plz advice.

    Are some of the variables hidden?
    Is the problem like this one :- Business Rules and "run on Save"
    Cheers
    John
    http://john-goodwin.blogspot.com/

Maybe you are looking for

  • Filtering a Query result for a specific value of a key figure

    Hi folks, I want to filter a query for a specific value of a key figure. The report should display all customer who has an account balance greater than EUR 500'000. Can I only implement this kind of filter via a condition in Query-Designer? If I run

  • JComboBox is not visible on JPanel

    I have a class that extends JPanel. Within this class I have added several different components; JLabels, JTextFields, JButtons and a JComboBox. All of the added components are visible and working except for the JComboBox. I can see the white backgro

  • Dreamweaver 5.5 and split view

    Split view doesn't work in Dreamweaver 5.5, was working but now it's not. Did I hit something to make it stop working, or do I need to reinstall. On a Mac 10.6.7.

  • Screen sharing Lion- Lion problem

    I am trying to set up screen sharing in my local network. I am using a MacBook with latest Lion as server to which I am trying to connect. I am connecting with a Powerbook 12" 10.5.8 without problems and controlling the MacBook via Screen Sharing. I

  • Restore ringtones

    Had to get a new iPhone because mine had water damage.  How can I get my ringtones back?