Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.
Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?
Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support
Similar Messages
-
Help
Try here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
And also the apporopriate topic of:
iOS: Device not recognized in iTunes for Windows -
Trying to download iTunes 64-bit version on my new Windows 7 PC. Getting the error 'could not locate "%APPDATA%". How do I get past this error? The software doesn't install. Appreciate if someone in the forum can help.
The backup and restore from the iCloud was a little unnerving since the restore erased all information from the iPod. The iCloud backup and restore took a long time, but worked. I was very grateful.
Trying again to backup to iTunes locally proved to be the same challenging problem. The same backup to corrupt file was the message. The status bar showing backup seemed to move faster to start, but then slowed to a creep toward the end before the error.
When trying to restore a backup in iTunes, the "Restore" button is grayed out since it is looking for a local copy. Any restore would need to be from the iCloud which already worked but isn't the final solution.
Your suggestions were good, I am just in the same boat. Any thoughts about doing the following?
1) creating a cloud backup
2) resetting the iPod to factory defaults
3) removing all traces of iTunes from my computer and
4) installing iTunes and setting up iPod from scratch.
This is the next thing on my list. -
After installing the latest version of ITunes I get an error message that says this application has failed to start because MSVCR80.dll was not found. how do I get Itunes to start working again?
See... Unable to install or open > http://support.apple.com/kb/TS5376
Also See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562 -
"could not start the Oracle BI Presentation Server on Local computer error"
Hello Folks,
i am trying to start the OBIEE Presentation services, The OBIEE server and Java Host Services are started.
i am getting this error and i didnt change any settings and finally getting this error
"Windows could not start the Oracle BI Presentation Server on Local Computer. For more information, review the System Even Log. If this is a non Microsoft service contact the service vendor, and refer to service-specific error code -1."
thanksHere is the solution from another freind
1. Stop BI Server Service > Start BI Server Service > Start BI Presentation Service. If that doesn't work...
2. Restart machine and follow step 1. If that doesn't work...
3. Check instantconfig.ini file and check syntax is correct. Also check java directory path mentioned is the valid one. If that doesn't work...
4. Rename the catalog folder to something else and follow step 1. It will create new catalog folder. Then copy _Shared from old catalog folder and you are good to go.
catalog folder will be in oraclebidata/web/catalog...
either delete the folder and create a new empty one or rename it
also have a look at instanceconfig.ini file
thanks -
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1
I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
i spent 4 hrs on web for solution but no luck.
the following is the error
Services
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
OK
---------------------------Please run AutoConfig and make sure it completes successfully and try then.
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
Thanks,
Hussein -
SPP 4.30 windows could not start the rwd uperform monitoring service
Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
Windows server 2008. 64 bits
All the installation was ok, but when you try to configure the server it doesn't show the web page.
The rwd uperform monitoring service can not start and send the following error:
Windows could not start the rwd uperform monitoring service error 1067.
Any ideas.
thanks
Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AMHi, thanks for the Help, i am sending the logs.
- <Log>
- <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
<Date>6/27/2011 1:23:09 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
<Date>6/27/2011 5:39:02 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
<Date>6/27/2011 10:59:44 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
<Date>6/27/2011 12:01:15 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
<Date>6/27/2011 1:06:19 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
<Date>6/27/2011 4:17:07 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
</Log>
<configuration>
<appSettings>
<add key="DataSource" value="fifcrsppdb01" />
<add key="Database" value="uperformGlossarydef" />
<add key="DatabaseEngine" value="SQLserver" />
<add key="DatabasePort" value="1433" />
<add key="DatabaseSchema" value="glossaryPublic10" />
<add key="ConnectionModifier" value=";pooling=false" />
<add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
<add key="DatabaseUser" value="glossaryPublic10" />
<add key="Flags" value="0" />
<add key="SMTPServer" value="172.16.3.114" />
<add key="SMTPDomain" value="16.3.114" />
<add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
<add key="HostPort" value="80" />
<add key="HostProtocol" value="http" />
<add key="GlossaryEnabled" value="True" />
<add key="GlossaryUseRTF" value="True" />
<add key="GlossaryDefaultLanguage" value="en-US" />
<add key="VignetteIntegrated" value="True" />
<add key="InstallLocation" value="C:\Vignette\Collaboration\" />
<add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
<add key="DataFolder" value="WWW\RWD\Data\" />
<add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
<add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
<add key="ErrorMaxSize" value="1000000" />
<add key="ErrorHistory" value="30" />
<add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
<add key="PublishingQueue" value=".\private$\PublishingQueue" />
<add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
<add key="ErrorQueue" value=".\private$\ErrorQueue" />
<add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
<add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
<add key="CurrentVersion" value="4.30" />
<add key="TrustAllCertificates" value="True" />
<add key="WebRequestTimeout" value="600000" />
<add key="LdapAuthentication" value="ServerBind" />
<add key="WordtoHTML" value="True" />
<add key="WordtoPDF" value="True" />
<add key="PPTtoPDF" value="True" />
<add key="ExceltoPDF" value="True" />
<add key="WordtoSource" value="True" />
<add key="PPTtoSource" value="True" />
<add key="ExceltoSource" value="True" />
<add key="PublishedContent" value="WWW\ucontent\" />
<add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
<add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
<add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
<add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
<add key="PensListenerPath" value="WWW\uPerformWS\" />
<add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
<add key="EnableDocSIM" value="True" />
<add key="EnableDocXHTML" value="True" />
<add key="EnableDocPDF" value="True" />
<add key="EnableDocWORD" value="True" />
<add key="EnableDocPPT" value="True" />
<add key="EnableCourseSIM" value="True" />
<add key="EnableCoursePDF" value="True" />
<add key="EnableCourseWORD" value="True" />
<add key="EnablePPTXsource" value="True" />
<add key="EnablePPTXpdf" value="True" />
<add key="EnableXLSXsource" value="True" />
<add key="EnableXLSXpdf" value="True" />
<add key="EnableDOCXsource" value="True" />
<add key="EnableDOCXhtml" value="True" />
<add key="EnableDOCXpdf" value="True" />
<add key="SystemPassword" value="" />
<add key="IntegrationEnabled" value="False" />
<add key="IntegrationUserName" value="" />
<add key="IntegrationPassword" value="" />
<add key="IntegrationURL" value="" />
<add key="IntegrationOutgoingPolicy" value="" />
<add key="IntegrationIncomingPolicy" value="" />
<add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
<add key="WebRequestQueryString" value="SMSESSION=NO" />
<add key="SiteMinderCookie" value="SMCHALLENGE" />
<add key="SiteMinderDomain" value="" />
<add key="TivoliCookieName" value="" />
<add key="TivoliCookieDomain" value="" />
<add key="TivoliWebSEALJunction" value="" />
<add key="TivoliWebSEALBaseURL" value="" />
<add key="AuthenticationType" value="Basic" />
<add key="LDAPTimeout" value="10" />
<add key="UserPageSize" value="2000" />
</appSettings>
</configuration> -
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
Windows could not start the distributed transaction coordinator service on local computer
Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
MelvinHi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
\Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang -
Windows could not start the Network Location Awareness service on Local computer
i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
hausHi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support -
Windows could not start the DHCP Client service on Local Computer, Error 2
Hi everyone,
I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
service on Local Computer." "Error 2: The system cannot find the file specified.".
There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
"sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
"NET LOCALGROUP administrators "NT Authority\Local Service" /add"
"netsh winsock reset catalog"
I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.Hi,
Did you mean after the restart the sfc /scannow command still could find the corrupted files?
Have you check this these related registry entries permission for your account?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
permission needed: Full Control, Read
for more information, read this article:
Some services do not start in Windows Vista and Windows 7
https://support.microsoft.com/kb/943996?wa=wsignin1.0
If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
Karen Hu
TechNet Community Support -
When I open Itunes it says,Windows could not start the bonjour service on local computer.
Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say? -
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows could not start the Server service on local computer Error 193:0xc1
Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
JoseHi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support -
its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?
http://support.apple.com/kb/TS1567
Maybe you are looking for
-
SharePoint 2010 search webservices compatibility with SharePoint 2013
Please let us know whether the SharePoint 2010 search webservice is compatible with SharePoint 2013. When we try to hit the SharePoint 2013 search service with the query developed in the Sharepoint 2010 , we are getting "System.Not supported" excepti
-
My ipod touch has been disabled for 212,456,875 minutes! I have followed all instructions on the apple support site to restore it but this has not worked. Help!
-
About spfile creating in oracle 10g while creating a new database
hi everyone, i had this problem while i was creating a new database in oracle 10g.when running the database script, it gives an error about invalid option for create temporary tablespace. is it necessary to have an spfile created in 10g. when the scr
-
Not Able to Download "Free Flash Builder Standard"
I am not able to download this when I click the Free Flash Builder Standard, Registerlink from this site:https://www.adobe.com/devnet/edu.html The browser just sits and sits and nothing happens. I am a student seeking to download this for development
-
I know this question belongs over in the CS3 folder, but there's no way to post over there yet. Will we be able to bring projects created in 2.0 into CS3? I've searched for the answer in everything I can find to read about CS3 but couldn't find it.