Transmit audio signal using Bluetooth

Hi LV folks.
I am trying to find a way to connect to a Bluetooth module and then send a audio signal, which comes from an external device, to this module.
After searching I found this instrument:
http://www.anritsu.com/en-gb/products-solutions/products/mt8855a.aspx
According to the documentation it has the ability to connect to a Bluetooth device and then transmit an audio signal from an external source to the Bluetooth device.
But it is pretty expensive and I don't need all of it's functions, so I was wondering if anyone has an idea for a cheaper alternative?
Is it possible to receive the signal on a PC-soundcard and then via LV transmit the audio through a Bluetooth connection?
Thanks for listening
Stephan

Well, LV does have the low-level functions for interacting with a Bluetooth interface. The question is how complex the protoicol would be to make it able to communicate with a speaker or headset.
For what it's worth, I have used a cheapo BT interface to talk to a Wii mote from LV.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Similar Messages

I want to transmit and receive the transmitted audio signal using labview with usrp ...can i get some help to do soo...thanks in advance

plz help me

this example receives frames on the same port. By CAN design you cannot receive the frame you are transmitting. If you want to receive what you transmit in addition there are 2 options:
- use the second port of your CAN device for Receiving the frames you transmit
- use the Self Receiption mode (refer to the manual for further details ho w to use this mode)

Distorted audio when using BlueTooth with Samsung i500 Vehicle Mount

The audio is severly distorded using a bluetooth headset while the phone is plugged into power using the Samsung i500 Vehicle Mounts built-in power port. The only workaround I have found is to flip the phone around and plug power directly into the phone instead of the Samsung i500 Vehicle Mounts built-i power connection. This issue has been reproduced using different i500 Vehicle Mounts, different USB power cords, and within differnt cars. There doesn't seem to be anyway to get the distortion to go away except to not use the built-in power port on the mount. Please let me know if anyone knows a fix for this issue.

Yeah, the built-in audio connector on the Vehicle Mount also doesn't work. When I bought my mount there was a little sticker over that connector that said it wouldn't work until Verizon updates the fascinate to version 2.2. However, nothing I saw indicated that using the built-in power connector would cause bluetooth audio distortion. So at this time I just put my phone into the mount backwards and plug the usb power chord directily into the phone instead so that the bluetooth audio quality is ok. When I want to get sound on my radio I just plug an audio cable from the sterio into the phone's headphone jack. Oh and I might as well add that if I get a call while I have the audio cable plugged into the headphone jack there is no way for anyone to hear me when I answer the call. So I have to unplug the audio cable before answering the call. Unfortunately, I've found that when an audio cable is plugged into the headphone jack, the phone disables speakerphone and bluetooth. Let's hope they get these issues fixed when they roll out the 2.2 software update.

Problem with video audio sync using Bluetooth headphones

I have recently bought a pair of beats studio wireless headphones but when using my ipad there are sync issues with video and audio. Many apps have the problem but sky go seems to be the worst followed by YouTube. Apple video is not too bad but not perfect.

Hello Jamie,
Thank you for the details of the issue you are experiencing with your new Bluetooth headphones. It can certainly get frustrating if the audio gets out of sync when using the headphones.
I recommend reviewing the sections titled "Resolution" and "Bluetooth disconnects, intermittent connectivity, or unable to find" in the following article for steps to troubleshoot the issue you described:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Thank you for using Apple Support Communities.
Best,
Sheila M.

How can I play an audio signal using DAQ or other way?

I'm designing a Voltage control amplifier. as shown in the attachment, I have a speaker connected to the power amplifier but all i have is noise. I like to know how can I put an simple audio to my circuit. My audio input is generated by the function generator. I only have a simple labview program which control my voltage input as attached.
Attachments:
Untitled.png ‏78 KB
DAQOutputControlVCA.vi ‏45 KB

No problem, your questions are not stupid. I just want to be sure you're digging into the examples and learning from them (they're a great resource).
The sound card outputs should be good enough to drive your circuit. Most cheap cards or built-in audio chips have a jack for line out and headphones (which is just the line signal through a buffer amp so you have volume control). Either on should work for your purpose. The line out should give you a volt or more at reasonable current levels. There also MIGHT be a low frequency filter on the output meaning that you won't be able to output DC levels or very slow (<20Hz) AC.
The jacks themselves usually have the signals (Left and Right) on the center conductors and the return is the barrel but you might want to look up your card's specs or probe the outputs before you connect anything to your circuit.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

Sony MDR-1RBT headphones have crackling or pops in audio when using bluetooth on my iMac - Mountain Lion

I notice crackling noise or pops when I listen to music using my Sony MDR-1RBT bluetooth headphones with my 3.4GHz Intel Core i7 iMac running OSX 10.8.5
I do not hear the crackling when I listen to the headphones using my MacBook Pro 2.7GHz Intel Core i7 with OSX 10.8.5
I also do not hear the crackling when using wired connection to the headphones.
So it would seem that something with the Bluetooth on the iMac is the problem. But I have no idea how to troubleshoot this further.
Does anyone have any ideas what the cause may be?
I am pretty sure that it is not interference from another device because I can connect to my MacBook Pro in the same area as my iMac with no crackling

Hi Michael Erb1,
Thanks for using Apple Support Communities. It may also be worth resetting the NVRAM of your iMac to see if that helps with the crackling:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
- Ari

Is it possible to send and recieve audio signal with AI / AO in NI-6229 which is DAQ board.

I'd like to test MP3 Player.
The procedure is below.
1. Send a audio signal of 1kHz from mp3 file in PC through AO in NI-6229.
2. Record it with MP3 player.
3. Play a recorded audio signal with MP3 player.
4. Recieve the signal through AI in NI-6229 and measure frequency and voltage of the signal.
5. Compare the signal with original signal.
Do you think it is possible?

Hello Blue Sky80,
It is possible to measure audio signals using LabVIEW and Sound an Vibration toolset. Please take a look at this Developer Zone article on Audio measurements using LabVIEW to get more information on this subject.I hope this helps!
Regards,
Ima
Applications Engineer
National Instruments
LabVIEW Introduction Course - Six Hours
Getting Started with NI-DAQmx

How can I get a video signal using IMAC 27 with only mini display port. I like to send the signal wireless to a TV using a TV/audio transmit system.

I have an IMAC 27 with a mini display port ( only this). I also have all the adapters ( mini display port to VGA, HDMI...).
Since I moved to UAE I like to transmit the signal frm my IMAC ( where I also look German TV on) to my TV. I will do so by using a wireless Transmit receive system with theree cinch inputs ( transmit system ( video, 2x voice).
The distance to the TV IS ABOUT 10m and one wall. I don`t want to use a cable.
Is there any solution for example mini display to VGA + VGA adapter to cinch so I can use the transmit system?
HDMI would also be an optiekn, bat then I have to by another Transmit receive system.
If somebody made already the experience I would appreciate to share the information
Is there may be any store in UAE where to get support. It is very diificult to get good advice here. They sell everything bat can not reaaly explain and have very often no technical knowledge. With this problem nobody until now can help me.
Hans
<Email Edited by Host>

I don't know what AppleTV can handle as far as bit rate is concerned, but increase the bit rate as high as it will let you. You are taking DV which is 25Mb/s and compressing it. If you're making an H.264, you should get great results needing no more than 6Mb/s. Bear in mind, the higher the bit rate, the larger the file size.

Using video and audio signal from a camera connect...

Why is it not possible and is skype intending to implement the ability to use the video signal form a digital camcorder connected to a tv?
A lot of people these days have digital camcorders or digital cameras that produce video signal. Why can't those be supported as video input by skype?

BC825 wrote:
..... Previously I had a HDMI to DVI cable and I had to awkwardly move the image off the PC monitor to the HDTV but with no sound. Should I send the equipment (Kanex VGA to HDMI converter and associated cables) back to B&H while I can still return them and get refunded....
Hi,
The following ports are at the back of your computer:
Figure 4: Back I/O panel
1 - USB 2.0: 4
2 - LAN
3 - DVI-D
4 - D-SUB port (VGA port)
5 - Audio: Line in
6 - Audio: Line out
7 - Audio: Microphone
You already mentioned DVI-HDMI : it works but no sound. That's true because DVI does not carry audio signals. All you need is using RCA cable to connect port #6 to your TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Transmit audio to multiple iPhones over bluetooth

Can i transmit audio from my iphone to opther iphones? Is there an App that does this? Or does iPhone ONLY transmit and not capable of receiving bluetooth?
The goal is to have multiple iphones listening to my bluetooth audio output. How can this be done?

That is not a supported feature on the iPhone.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.

How many airport express can I add to my network for the purpose of using the airport express to send audio signal to different rooms in the house? I'm interested I'm running about six different zones.
What I'm looking to do is to have self powered in ceiling speakers in every room in my house with out having to run wires to every room to carry the audio signal. I would like to use the airport express to do the job of carting the audio signal.
Here's my set up now I have an airport extreme and one airport express that I use to carry audio to one room.

FWIW. I have used up to four AirPort Express Base Stations (AX) for streaming sucessfully in pretty much the way you have described. I didn't have a need to try more so I can't attest that more would or would not work.

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!.

Streaming Audio through Iphone 5 to desktop or laptop using bluetooth preinstalled on all devices not working. Help!!!. Does anybody else have this problem?. Or does anybody have a solution to the problem. If So please help me its driving me demented seriously concidering to go to android for that sort of stuff cause of the dame restrictions on apple devices!

iOS devices do not pair with computers, as data transfer over bluetooth is not supported.
Computers are not airplay compatible unless you have downloaded an app to make them so.
User to user forum, so I don't care if you switch to android or any other threats you make.

E71 use bluetooth while audio jack,s connected

is it possible to use bluetooth headset while audio jack,s connected?
i listen a lot of internet radio on my e71 through car stereo by casette adapter(headphones enhancement).it's very arduous to plug off audio jack from the phone every time you want to answer a call and talk by bluetooth!
even if bluetooth heaset is connected i can't use him till i plug off audio jack.
if i answer a call when jack is connected i can hear the voice throough car speakers and i have to use phone mic.
is there any solution ?
please help!

I'm also having this problem. So are over 50 people to date, and I'm sure we're just the only ones who are active. http://androidforums.com/samsung-galaxy-s3/576056-can-not-use-bluetooth-when-audio-jack-plugged.html
Can this be fixed? This is extremely dangerous. I use my phone as an mp3 player and connect it through the audio jack in my car, and also want to use my bluetooth headset to make and receive calls. Instead the call comes through my speakers and there is no microphone, leaving me scrambling to unplug my audio cable while driving.
People say that the original firmware didn't have this problem. Samsung says it's Verizon, Verizon says its Samsung, I dont care who is liable as long as someone fixes it!
Thanks

Airport dont transmit the audio signal

My Airport express is connected in the network as a "slave", so it dont distribute ip addresses. In this mode it dont transmit the audio signal to my audio system.
If I change the configuratioin and it does distribute ip addresses, it also transmit the audio signal to the aduio system.
Is there a solution for this bug?

Not sure what you mean by "slave." I assume that you mean that you configured the AirPort Express Base Station (AX) to join an existing wireless network as a wireless client ... correct?
If that is so, then streaming from iTunes would first travel to the other wireless router, and then, to the AX before it goes to the audio system.

Audio streaming in j2me using bluetooth

hi, i m developing a project in which i need to play an audio from other bluetooth connected mobile device but without downloading it to my phone... can anyone help me in this..

frzottis
Please see the response on the last thread you posted to.
[http://forums.sun.com/thread.jspa?threadID=735118&start=6]
If you continue to ignore the advice, your user account may be blocked.
I'm locking this thread too. It's more than a year old.
db

Transmit audio signal using Bluetooth

Similar Messages

Maybe you are looking for