Transparent Partitioning Error

Can somebody please help with this error :
[target] - partition definition is not valid: [unable to process area for slice [1] see server log]

There are 2 cubes A, B and transparent partition created to third final cube C with both of them. On partition b/w cube B and cube C following error is coming:
[target] - partition definition is not valid: [unable to process area for slice [1] see server log]
I read somewhere on google that this error comes when there is problem with other partitions on same cube.
On partition b/w cube A and cube C following error is coming:
Partition [sestc01as288.danfoss.net:1423 EssDRS EssDRS] is not valid [Target] - Partition definition is not valid: [Partition definition for slice [1] does not parse]
Please suggest some solution how to check.

Similar Messages

Essbase Transparent partitions error

Hi!
I'm facing the following error in essbase
Essbase database error 1023040: msg from remote site [[Wed May 22 11:14:36 2013]preicostos66/PS09/PS09/admin@Native Directory/Warning(1023011) Error asigning remote member [OBJ_537].]
msg from remote site [[Wed May 22 11:14:36 2013]preicostos66/PS09/PS09/admin@Native Directory/Error(1040023) Unvalid network data.
The situation is the following
Three applications have Transparent Partitions PS2008 PS2009 & PS2010 (sources)
These were referenced in only one application PS (target) with extra dimention (YEAR)
PS outline is member complete but when retrieved any data that is not in the PS2009 outline unexistent member it shows the error.
Please help
Oscar

Hi-
It wouldn't be matter if members in current BSO cube partitioned to members existing in historical ASO cube. But if you want to retrieve new members that exist in BSO cube and don't exist in ASO historical cube, it won't show any value since it doesn't exist in the historical cube and of course the partition area from BSO to ASO can't be updated except when you want to map it to another member.
Regards,
Will
Edited by: William Lesmana on 22-Jan-2009 02:37

Syntax error Creating Transparent Partition in MaxL

Hello,
I'm trying to create a simple transparent partition (no mapping needed, just using all the 3 dimensions and descendants in the source database to the target database. I'm getting a syntax error, I went through the MaxL naming conventions and also tried a couple of diffferent things but to no avail. Please help as to what the error might be:
My code is as below. The error I get is: Getting a syntax error near '@IDESCENDANTS("Accounts"), @IDESCENDANTS("Products"),@IDESCENDANTS("Market)
Code:
create transparent partition student8.coke area '@IDESCENDANTS("Accounts"), @IDESCENDANTS("Products"),@IDESCENDANTS("Market")' sourceArea to student8.cokepart at lab01 as essadmin identified by 'password' area '@IDESCENDANTS("Accounts"), @IDESCENDANTS(Products), @IDESCENDANTS("Market")' targetArea;

Nobody replied to this, but actually the error was the double quotes on Accounts, Products and Market.

Transparent Partition Mapping Error

I havd an ASO source cube and BSO target cube
Source Dimensions:-
Periods
Account
Company
CostCentre
Product
Target Dimensions
Periods
Account
FiscalYear
Scenario
Company
CostCentre
Product
Using MAXL I create a partition but I cannot get the mapped area to work correctly. the syntax I am using is :-
create transparent partition 'SOURCE'.'GrpSrc'
area '@DESCENDANTS("Periods"), @IDESCENDANTS("Account"),@IDESCENDANTS("Company"),@IDESCENDANTS("CostCentre"),@IDESCENDANTS("Product")' sourcearea
to 'TARGET'.'GrpTgt'
area '@LEVMBRS("Periods","Lev0,Periods"),@IDESCENDANTS("Account"),@IDESCENDANTS("Company"),@IDESCENDANTS("CostCentre"),@IDESCENDANTS("Product")' targetarea
mapped targetarea('"Actual"') to ('')
mapped targetarea('"CY"') to ('');
The partition is not being created correctly because the extra dimensions in the target cube [Scenario and Fiscal Year] are not mapped
Please let me know what I should be doing to get this to work!
Essbase 11.1.2.1
Many thanks

Hi ,
This error generally comes when there is an extra dimension in the target datasource.
Yes, you can create a transparent partition between databases having different numbers of dimensions. In your case, you have to create a mapping from 'void' to a member in your extra dimension (i.e. 'Actual') in the target. There is an example in the DBAG.
see the section on this page headed "Mapping Data Cubes with Extra Dimensions": http://download.oracle.com/docs/cd/E17236_01/epm.1112/esb_dbag/dotprtbd.html.
Thanks,
KKT
http://www.knowhyperion.com

Using AGG/CALC DIM function in the BSO target cube of Transparent Partition

Hi,
Is it possible to use AGG("dimension") on a dimnesion in the BSO cube that is a target cube for a BSO-BSO Transparent Partition/
I have created the partition area with 3 dimensions, one being 'Source'. 90% of the source members are being refrenced from source to target via that transparent partition. But I still have the 10% Source members in the target cube that need to roll up to the 'Source"(along with the 90%) for correct aggregation.
When I try to use AGG("Source") in a FIX statement that's within the partition area, I get the following error:
Error: 1042013 Network error [10054]: Cannot Receive Data
Error: 1042012 Network error [10054]: Cannot Send Data
Can I not aggregate the dimension in the Target cube?
Thanks

Hi,
We have the same problem.
I try to create transparent pertition between BSO (as a source) and ASO (target) and have the same warning message.
Just to eliminate possible effect of outline complexity I created very simple DBs with the following outlines:
__For ASO:__
mes1
mes2
Measures
prd1
prd2
Products
Actual
Adjustment
Scenarios
__For BSO:__
mes1
mes2
Measures
prd1
prd2
Products
Adjustment
Scenarios
In addition to the message I have the following behavior - ASO has data in "Actual" scenario, BSO has data in "Adjustment" scenario. Before partition definition I can see the data in the right places, but when the partition created, Actual data disapeared from report of ASO. It is still in the database, and when the partition removed - appears again.
Any ideas?
Thank you in advance,
Alexey

Partition ERROR - 1023040 - msg from remote site : need to understand

hi,
I currently have a problem with the partitions between two cubes.
Architecture:
      80 countries database (source)
      1 world database (destination)
Process :
- The partitions are created dynamically by maxl scripts :
spool on to $1;
Alter application $2 comment '**_batch_**';
Alter application $4 comment '**_batch_**';
Alter system load application $2;
Alter system load application $4;
Alter application $2 disable startup;
Alter application $4 disable startup;
Alter application $2 disable connects;
Alter application $4 disable connects;
/* Create Transparant Partition between Country cube to Mond cube */
create or replace replicated partition $2.$3
AREA
'"S_R_N",
&curr_month,
&local_currency, "D_EURO",
@IDESCENDANTS("P_Produit"),
@LEVMBRS("M_Marche",1),"M_Marche",
@IDESCENDANTS("B_Marque"),
@IDESCENDANTS("U_Sourcing"),
@REMOVE (@DESCENDANTS("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS("I_Divers"),
@IDESCENDANTS("NA_Nature"),MCX'
to $4.$5
AREA
'"S_R_N",
&curr_month,
"D_DEV", "D_EUR",
@IDESCENDANTS("P_Produit"),
@LEVMBRS("M_MixClient",0),"M_MixClient",
@IDESCENDANTS("B_Marque"),
@IDESCENDANTS("U_Sourcing"),
@REMOVE (@DESCENDANTS("I_Masse"), @LIST ("I_55CCOM")), @DESCENDANTS("I_Divers"),
@IDESCENDANTS("NA_Nature"),MCX,
&country_name'
mapped globally ('',D_$7, "D_EURO", "M_Marche") to (W_$6,D_DEV, "D_EUR", "M_MixClient")
refresh replicated partition $2.$3 to $4.$5 all data;
drop replicated partition $2.$3 to $4.$5;
Alter application $2 enable startup;
Alter application $4 enable startup;
Alter application $2 enable connects;
Alter application $4 enable connects;
Alter application $2 comment '**_enable_**';
Alter application $4 comment '**_enable_**';
Alter system unload application $2;
Alter system unload application $4;
Spool off;
Logout;
exit;
- Defragmentation cubes, launch replications countries successively one by one to the world cubes sequentially .
the order of the country is not the same from one month to another .
Treatment is initiated each month.
Symptoms :
- Partition fall into error with the following message but not systematically .
message:
MAXL > refresh replicated partition PGC_ESP.Pgc_esp PGC_MOND.Pgc_mond to all data ;
   ERROR - 1023040 - msg from remote site [ [ Wed Nov. 29 10:21:03 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error ( 1023040 ) msg from remote site [ [ Wed Nov. 29 10:21:02 2013] hprx1302 / PGC_ESP / Pgc_esp / PGC_ADMIN / Error (1023040) msg from remote site [ [ Wed Nov. 29 10:21:01 2013] hprx1302/PGC_MOND/Pgc_mond/PGC_ADMIN/Error ( 1042012 ) Network error [ 32] : Can not Send Data ]]] .
We note that the error occurs in the following cases:
- The errerur happens generally when the average clustering ratio is low. (cube fragmented) for cubes source and / or destination
- When beacuoup replication were done before: in the last 10 to 15 cubic remaining replicate.
- We mistake once on the environment recipe on the first cube with average clustering ratio to 0.96 but the server recipe is much less efficient.
We noticed that when doing a defragmentation cubes source and destination once the error obtained treatment replication was no longer falling into error.
Problem: defragmentation cube world take 10 hours.
We also made the following observation:
OK/INFO - 1051034 - Logging in user [PGC_ADMIN].
OK/INFO - 1051035 - Last login on Friday, November 29, 2013 10:19:46 AM.
OK/INFO - 1053012 - Object [Pgc_esp] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [Pgc_mond] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [54116855] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [39843334] is locked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [54116855] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [39843334] unlocked by user [PGC_ADMIN].
WARNING - 1241137 - [Target] - Partition definition is not valid: [Cell count mismatch: [1279464568200] area for slice [1] members per dimension [63 1 2 1 6 26 7 245 1 37955 ]].
OK/INFO - 1053012 - Object [25586652] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [11329970] is locked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [25586652] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [11329970] unlocked by user [PGC_ADMIN].
WARNING - 1241137 - [Source] - Partition definition is not valid: [Cell count mismatch: [47895484140] area for slice [1] members per dimension [63 1 6 7 2173 2 17 1 245 ]].
OK/INFO - 1053013 - Object [Pgc_esp] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [Pgc_mond] unlocked by user [PGC_ADMIN].
OK/INFO - 1051037 - Logging out user [PGC_ADMIN], active for 0 minutes.
OK/INFO - 1241124 - Partition replaced.
Following these findings we need to understand what is happening.
We would like to understand why partitons fall errors?
why we have the message "Partition definition is not valid" in the logs when creating the partition?
Regards,
Oliv.

Hi SreekumarHariharan,
Tx to your anwers, but we are already try all the solution proposes to Essbase FAQ.
a)Increase the values for NETDELAY and NETRETRYCOUNT in essbase.cfg file.Restart the essbase server.
We are changed the two value in the essbase.cfg but nothing to do. The same error appears
b)Make sure that the all source members and target members used in partition are in sync
All member are diferent between source and target but a mapping are defined in the partition (see the partition maxl in my below message.
c)Validate the partition (look at the validation tab, it will give the numbers for each side of the partition ie source area and target area)
You can see the logs of validation partition :
WARNING - 1241137 - [Target] - Partition definition is not valid: [Cell count mismatch: [1279464568200] area for slice [1] members per dimension [63 1 2 1 6 26 7 245 1 37955 ]].
OK/INFO - 1053012 - Object [25586652] is locked by user [PGC_ADMIN].
OK/INFO - 1053012 - Object [11329970] is locked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [25586652] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [11329970] unlocked by user [PGC_ADMIN].
WARNING - 1241137 - [Source] - Partition definition is not valid: [Cell count mismatch: [47895484140] area for slice [1] members per dimension [63 1 6 7 2173 2 17 1 245 ]].
OK/INFO - 1053013 - Object [Pgc_esp] unlocked by user [PGC_ADMIN].
OK/INFO - 1053013 - Object [Pgc_mond] unlocked by user [PGC_ADMIN].
OK/INFO - 1051037 - Logging out user [PGC_ADMIN], active for 0 minutes.
OK/INFO - 1241124 - Partition replaced.
d)Rerun the Partition script again
The same error appears.
Tx to your help.
Regards,
Oliv.

MAXL and Transparent Partition

Hello,
I am actually working on the Hyperion Essbase EPM 11.1.2
I am trying to create a transparent partition using a MaxL command:
When I create manually this partition (using EAS): This is validated and data are copied.
When I run the MaxL: The partition, appear but it seems to be broken, I can only repaire or delete the new partition.
If I try to repair it (in EAS), It does not work. I don’t manage to link my partition to source and target database.
I have used with two different users : Admin (native directory) and another user (admin access).
Thanks for your answer,
Arthur.

Hi,
What the error message you are getting.
When you create a partition via Mxl editor it will open the interface to create the partiton. Check this Mxl with your mxl.
Thanks,

Issue in ASO to BSO TRANSPARENT PARTITION

Hi Techies,
We are facing issue in ASO to BSO Transparent Partition. Please see below details and suggest.
1. we are having a ASO cube transparently partitioned on to BSO cube.
2. In ASO cube, we have a dimension with 3 hierarchies under it which are strored hierarchies. when we retrieve data for this hierarchies from BSO cube we are getting data.
3. Now we were asked to add one more stored hierarchy under the same dimension, we built the dimension and built aggregations based on the queries. After creating the partition we are not able to retrieve the data from BSO cube for the newly added stored hierarchy everything else is working fine as before. The following is the error am getting when I tried to retrieve data for the newly built stored hierarchy.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
I increased CALCLOCKBLOCK in .cfg file , increased data cache size and bounced the server. Even now am getting the same error. Please suggest what else we can do with this kind of error

Did the number of blocks that couldn't be locked decrease when you increased the data cache if so try increasing the data cache some more, make sure you restart the db after each change.
Cheers
John
http://john-goodwin.blogspot.com/

Synchronisation of Transparent partitioning throught AAS

I am having problem synchronizing two databases with Transparent partitioning.
If I try to do it through MAXL script it works perfectly fine but when I try to do it manually using AAS (9.3.0) it throws an error
Error : Partition does not exist - 'can't be found in local partition definition file'
Any suggestions?

Hello Martin,
Thanks for the info. Now, I am able to understand...:)
You consider following and check if the error message is resolved:
1. If executing the MaxL script from client machine, add the Essbase Server IP addresses to the Hosts file of the Client machine
2. Edit the essbase.cfg file and add the following:
NODENAME
NO_HOSTNAME_LISTCONNECT TRUE
3. If using EAS console, and if Essbase server is NOT added explicitly with port number .i.e. HOSTNAME:PORT then please do so:
ServerName:PortNumber (for example Localhost:1423)
If using MaxL, connect to Essbase Server in the above format.
4. Try connecting to Essbase Server using IP Address.
If nothing above works, then you can suspect that the partition is corrupt. Then try the following:
1. Rename or delete the .ddb files from the source and target database directories.
2. Stop and Start the source and target databases.
Hope it helps...
KosuruS
P.S: If this is helpful, Please mark it :)

User View is not reflecting the source data - Transparent Partition

We have a transparent partition cubes. We recently added New fiscal year details to the cube (user view as well as source data cube). We loaded the data to the source data cube. From the user view, we tried to retrieve data, it shows up 0's. but the data is availble in the source data cube. Could anyone please provide the information what might be the issue?
Thanks!

Hi-
If u haven't add the new member in the partition area, then Madhvaneni's advice is the one u should do. Because, if u haven't add the member, the target can't read the source.
If u have already added the new member in the partition area, and still the data won't show up, sometimes it's worth to try re-save the partition, and see what's the outcome.
-Will

Stumped On How To Fix HFS+Partition Error!! Help!

WEll hello and i am having so much trouble with my mac software. My current setup is as follows.
-Windows XP Home Edition Installed As Base OS
-80GB Hard Drive Partitioned
-65GB Windows NTFS Partition
-15GB Mac Partition
-Intel Celeron Processor
-Multiboot Software Set Up As Well
Here's my problem. I made all the partitions correctly and installed the Mac software onto my pc with already had Windows XP installed on it. The install went smoothly and the disk was mounted and formatted correctly. But after the install of the Mac OS I restart my pc and boot into Mac. Immediatly a message comes up saying HFS+ Partition Error. I have tried tons of things to fix it but everywhere I go it tells you have to fix erros related to intalling Windows onto a Mac. But luckily my Windows Xp still boots up fine. Someone out please help me!!
Great appreciation if ya do
Toshiba Satellite Laptop Mac OS X (10.3.2) Windows Based PC, Intel Celeron Processor

Hi Steel Raptor;
What you are trying to do is illegal. Asking for help here is not a good thing since this forum is an Apple sponsored site.
Allan

Trouble installing Lion due to partition error

Hi everyone,
So I don't know a whole lot about computers, and I have had my macbook for a couple years now and decided to install Lion last night. After I downloaded it, I got an error message saying that it could not be installed and I needed to change my HD's partitioning to GUID. The internal HD I have in my mac now I installed myself, and I must have accidentally clicked apple partition map instead of GUID when I installed it, which didn't cause a problem until now (my macbook has an intel processor). So i backed up everything on my HD to an external HD using carbon copy, hoping that I would just be able to reformat/partition my internal HD correctly and move everything back onto it from my external drive. I booted my computer using the external drive, and tried to repartition using disk utility, but I keep getting a partition error message that tells me the disk cannot be unmounted. I got the same message when I tried just erasing the disk first. Anyone know how I can fix this?
Thanks, and Happy Holidays!!

Try starting from your Snow Leopard Install disc.

Drill-through via Transparent Partition

Hi
I am using Essbase Server and EIS 11.1.1. I have a ASO target cube which points to different ASO source cubes partitioned on dates. Each source cube has defined a drill-through report and this drill-through reports work fine if I access them directly from Excel add-in. But when I access these source cubes via my target cube (transparent partition) drill-through reports don't work (no visual effect on intersection cells). When I double click on them I cannot see my drill-through reports. Could anyone tell me what I am doing wrong here please? According to documentation, I should be able to drill-through via tranparent partioned target cube.
Regards
Chandra

Thank you for the reply but Essbase Studio does NOT support drill-through from Recursive Hierarchy dimensions. That's why I had to go back to EIS.
Edited by: user2695091 on 20-Feb-2009 17:30

Transparent Partition Between ASO & BSO

Hi,
I am trying to define a Transparent Partition between an ASO (Source) & a BSO (Target) cube.
My ASO cube has 16 dimensions, BSO has 12 dimensions. The matching 12 dimensions are identical.
The data from the source should be taken from all levels of the 12 matching dimensions and Highest level data of the non matching dimensions.
Is this doable?
Is there any special syntax in partitions definitions?
Appreciate your thoughts.
Thanks,
Ethan.

Glenn,
Thanks. It's working. I created the partition manually, kept void for all the 4 missing dimensions.
When I have to write the script, I am not sure how to specify that in the script
mapped targetAreaA ("Dim1") to (Void)
mapped targetAreaA ("Dim2") to (Void)
mapped targetAreaA ("Dim3") to (Void)
mapped targetAreaA ("Dim4") to (Void);
or
mapped targetAreaA ("Dim1", "Dim2", "Dim3", "Dim4") to (Void, Void, Void, Void)
Are these correct syntaxes?
Appreciate your thoughts.
Thanks,
Ethan.

Partition error. couldn't unmount disk

I new buy mac mini 2012. I have osx mountain lion.
When I create a partition get error "Partition Error". "Couldn't unmount disk"
I haven't OS now. Because I removed its.
I can't create partition under 500 GB HDD.
And I'cant see Recover HD.
My disk Utility Screen:
When I create partition I get below error pop-up message.
When I browse for Image I see Recover HD.
finally. "diskutil list" typing in terminal list disks.
Please

My macbook air (OS x lion ) hard disk got crashed. now it starts with a grey screen and MAC OS X utilities. in the disk utility, the hard disk icon became inactive. when i erased the disk it became active again but i am still not able to partition it. it showed -- "Partition Error". "Couldn't unmount disk". now the disk icon became inactive again. when i click on mount it becomes active again but partioning is not done after many attempts.
another problem: - when it I click to proceed with the installation (still unpartitioned) it verifies my macbook's eligibility and says that the machine information is not with apple. below are the screenshots.
is there any internet issue, i got connected on my institute's wi-fi (excellent speed- 54mbps)

Transparent Partitioning Error

Similar Messages

Maybe you are looking for