Transport collection issue
I would like to Trasnport an infoobject from Dev to Quality.
I have given Source system assignment correctly.
But when I am trying to collect all related ( i mean all attributes and attributes' attribute), it is giving the following error:
Edit objects separately since they be
original systems
Choose 'Display object' or 'Cancel'.
I tried in many ways to resolve this.. But I could not collect and almost the trasnport request has failed 4-5 times. Can any one help me how to resolve this.. Its very very urgent
Thanks
Ananya
Hi Ananya,
I too had the same issue. I worked on BI7.0 SP9 .
I could solve this by taking few infoobjects at one time rather than taking all at a time. I could find the issues exists with few infoobject like 0PLANT, 0CALMONTH etc..
Let me explain clearly to you now.
I Collect the cube with necessary objects in transport connection
First I select cube and first 10 infoobjects if this is sucessful then select next ten, if you find issue with 10 select five and narrow down the selection for infoobject that is causing the issues. the same needs to be done multiple number of times to collect all the object. I tried a lot but I could not find any other solution than this .
Hope this helps.
Regards,
PV
Similar Messages
-
Transport Collection includes Logical System?
Hi, I am collecting up Object for the BW Admin Cockpit and the collected list includes the BW Logical System as well. I can't understand why this would get picked up and I don't know what the consequences are for transporting this. The Transport Connection will not allow me to unselect it!
So I am thinking of just creating the transport with it and then manually deleting it in the transport.
Can anyone shed any light
1. why this is being included in my transport?
2. what the consequences of sending it might be
3. Is it OK to just manually delete it from the actual transport and not worry about it.
Here's a picture of the Transport Collection for review http://i44.tinypic.com/ofx1lv.png
Thanks for any insight...1. why this is being included in my transport?
This would get connected, if u selected 'Grouping' option In dataflow before or In dataflow before and afetrwds
2. what the consequences of sending it might be
The corresponding logical system would be there in target system. Hence this is not required to transport
3. Is it OK to just manually delete it from the actual transport and not worry about it.
U can delete that manually -
Has any seen collection issues after 11g database upgrade?
We do have an SR open.
Just wondering if anyone else has experienced collection issues after upgrading the db to 11g? Our technical folks are hoping it is something else but for the past few weeks we have seen random issues stemming from collections. We run a full collections 5 nights a week. There are material transactions occurring during the two plus hours of collections. This seems to be randomly skewing on hand snapshots in collections as well as missing supply i.e. work orders. Only impacts a fraction of the records in material transactions and they are different every night.
Reason I believe it has to do with transactions during collections is one collection run out of the five is generally pretty good...Sunday evening for there is very limited transactions taking place on this evening.
Thanks in advanceAnswer to above question not required now as:
Having read the 24th December update of note 761570.1 - 'Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade' I have decided to upgrade the database to 11.2.0.x by following the Path C option.
Unfortunately as the 11.2.0.x upgrade isn't covered by MWIZ yet I will have to follow the manual steps. -
Exchange Server 2007 Transport Agent Issue
This is the first time i am working on Exchange Server Development. Below is a simple Transport Agent that i am using, this agent should simply update the email Subjects
as shown below in the code.
using System;
using System.Collections.Generic;
using System.Text;
using Microsoft.Exchange.Data.Transport;
using Microsoft.Exchange.Data.Transport.Smtp;
namespace MyAgents
public sealed class MyAgentFactory : SmtpReceiveAgentFactory
public override SmtpReceiveAgent CreateAgent(SmtpServer server)
return new MyAgent();
public class MyAgent : SmtpReceiveAgent
public MyAgent()
this.OnEndOfData += new EndOfDataEventHandler(MyEndOfDataHandler);
private void MyEndOfDataHandler(ReceiveMessageEventSource source, EndOfDataEventArgs e)
e.MailItem.Message.Subject = "This message passed through my agent: " + e.MailItem.Message.Subject;
Below is the Powershell script i am using to install the Agent.
Net Stop MSExchangeTransport
Install-TransportAgent -Name MyAgent -AssemblyPath EmailLogger.dll -TransportAgentFactory MyAgents.MyAgentFactory
Enable-TransportAgent -Identity MyAgent
Net Start MSExchangeTransport
Agent installed successfully using Exchange Management Shell.
Now when i send/receive emails in exchange, Email subjects are not modified. Emails have their original subjects. I don't know why?
I also performed the steps mentioned in below links to debug the Agent but breakpoints are not being hit by Visual Studio Debugger.
sf-tools.net/Messaging/tabid/55/EntryId/163/Exchange-2010-Transport-Agent.aspx
stackoverflow.com/questions/12347123/debugging-ms-exchange-2007-transport-agent
omarjames.com/blog/index.php/debugging-exchange-transport-agent/
My System Configuration
I am using the Exchange Server 2007 Virtual Machine provided by Microsoft from link below
microsoft.com/en-pk/download/details.aspx?id=14901
I also installed the Visual Studio 2008 on the VM for debugging.
Please help me in resolving the issue?How are you testing this ? a SmtpReceiveAgent will only fire when the server receives email over SMTP. So if your just logging on and sending an Internal Email (eg mailbox to mailbox) or sending Email externally then the
SmtpReceiveAgent wont fire. For a single server if you want to capture all email you need to use a router agent see
http://blogs.technet.com/b/postwoman/archive/2010/09/14/step-by-step-how-to-create-a-routing-agent.aspx
. If you want to test what you have try sending an email to mailbox over SMTP using an SMTP client or Telnet
http://exchange.mvps.org/smtp_frames.htm
Cheers
Glen -
Hello All,
I have an issue I can't seem to figure out. I have an infoArea with a bunch of different infoareas under it. the problem I am running into is that there are also some DSO's within the infoarea as well.
So here is my setup:
DEV --> Infoarea with a bunch of info areas below it (I moved the DSO's that were under this infoarea to somewhere else)
QA --> Infoarea with a bunch of info areas below it (however the DSO's in QA are still within the infoarea)
QUSTION: Is there a way to transport the folder structure as I have it in DEV without having to activate everything once it gets into QA...so basically I want to take a picture of what I have in dev and move it to QA without the hassle of activating everything?
Thanks in advance!Hello
If you transport the related objects to QA, you do not have to activate any thing manually there. Make sure all the objects you want to transport are active in development system.
Also, while collecting the objects in Transport connection, tick the objects which you want to transport.
There should be any problem...
Hope this helps
Cheers -
I would like to Trasnport an infoobject from Dev to Quality.
I have given Source system assignment correctly.
But when I am trying to collect all related ( i mean all attributes and attributes' attribute), it is giving the following error:
Edit objects separately since they be
original systems
Choose 'Display object' or 'Cancel'.
I tried in many ways to resolve this.. But I could not collect and almost the trasnport request has failed 4-5 times. Can any one help me how to resolve this.. Its very very urgent
Thanks
AnanyaHi Ananya,
I too had the same issue. I worked on BI7.0 SP9 .
I could solve this by taking few infoobjects at one time rather than taking all at a time. I could find the issues exists with few infoobject like 0PLANT, 0CALMONTH etc..
Let me explain clearly to you now.
I Collect the cube with necessary objects in transport connection
First I select cube and first 10 infoobjects if this is sucessful then select next ten, if you find issue with 10 select five and narrow down the selection for infoobject that is causing the issues. the same needs to be done multiple number of times to collect all the object. I tried a lot but I could not find any other solution than this .
Hope this helps.
Regards,
PV
I had replied to your other post as well -
Stock Transport order issueing storage location determination
Folks,
In case of a Stock transport order scenario in which plant A with SLOC1 delivery to plant B with SLOC 2. Is there any option how the issueing storage location can be determined? The delivering plant can be determined through the special procurement key but there is no option for the issueing SLOC.
Regards,
MdZHey Karen!
I am not sure if I understand your problem correctly.
You do not want the system to create a new MARD entry when postin goods issue.
You can enable/ disable this function with transaction OMB3 in the customizing.
have fun
Flo -
Performance Report Manager Data Collection Issues
I have an agent running and collecting data in a circular file.... history.log
Data Collection has failed approximately 6 days ago without warning. I have tried to find out the issue and have not had any success.
If I open the Data Collection Window in PRM I see a Yellow triangle beside the hostname:port.
If you can provide any information as to what to look for, please reply.history.log may be corrupted. If you run it through ccat to flatten it does it show any recent (i.e. newer than 6 days) entries?
If ccat gives errors then just move it out of the way (i.e. rename it to history.log.busted) and restart your Agent. A fresh log will be created. Give it a couple hours to make a couple flushes of data to your SunMC Server and see if PRM works.
Regards,
Mike
[email protected] -
HELP - Exchange Server 2007 Transport Rule Issue
Hi all,
sorry if here is not the place to put my question but I did not find another forum, so if anyone can help me I appreciate.
- I have an Exchange Server 2007 SP3 environment with 1 MBX Server and 3 CAS/HUB Servers.
- I have created a Transport Rule that said:
"all emails that have @test.com in BCC field are dropped off except one group can send" .
The issue is the rule doesn´t work.
Anyone can help me, please?
Thanks in advance.
LuizThe Exchange previous versions forums are here:
http://social.technet.microsoft.com/Forums/en-US/category/exchangeserverlegacy
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
LMS 4.2 Topology Data Collection Issue
Hi there,
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen". It only shows the following content from first run:
Topology Data Collection 193 0 Not Available Running Schedule
Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
Thanks for help.Hi,
i have reseted the ANI db using NMSROOT\bin\perl.exe NMSROOT\bin\dbRestoreOrig.pl dsn=ani dmprefix=ANI
Everything is set to 0:
Topology Data Collection 0 0 Not Available Running Schedule
UT Major Acquisition 0 (0 End hosts 0 IP Phones) 0 Not Available Idle Schedule
VRF Collection 0 0 Not Available Idle Schedule
But Topology Data Collection is still frozen to "Running" state.... -
LMS 3.2 Data Collection Issue
Hi ,
I have LMS 3.2 and license for adding 5000 devices , my data collection is running continously for the past 2 days, when i try to stop the daemon manager and restart it comes to idle state but after some time it again goes to Running state
I am not getting the best practices deviations and discrepaqncies report after this issue
I am attaching the ANIServer.properties , ani.log and ANIServer.log file
Please helpthis seems to be BugID CSCtd49439:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtd49439
also consider to install the patch for BugID CSCtg20882:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCtg20882
if you have CM 5.2 you should consider to upgrade to CM 5.2.1 which is available here:
http://www.cisco.com/cisco/software/type.html?mdfid=282641773&flowid=5141&softwareid=280775108
the patches for BugIDs CSCtd49439 and CSCtg20882 are availabel by contacting TAC -
Transportable tablespace - Issue in impdp
Hi guys,
I need to transport the tablespace from 32 bit environmet (32 bit Linux and 32 bit Oracle) to 64 bit environment (Both 64 bit) as I am migrating to 64 bit.
I have exported the tablesapce from 32 bit machine using expdp command. But I am getting below error while trying to import it on 64 bit environment
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_TRANSPORTABLE_01" failed to load/unload
ORA-02354: error in exporting/importing data
ORA-02373: Error parsing insert statement for table "SYSTEM"."SYS_IMPORT_TRANSPORTABLE_01".
ORA-00904: "ORIGINAL_OBJECT_NAME": invalid identifier
Oracle version in 32 bit mc is : *11.1.0.7.0*
Oracle version in 64 bit mc is : *11.1.0.6.0*
Tablespace path in 32 bit mc was : /opt/oracleDBTable/tablespace/
I have mounted this folder from 32 bit mc to same path on 64 bit mc using NFS.
All tablespaces has been changed to read only and metadata file has been copied in binary mode to 64 bit mc.
Can anyone Pls help me in resolving this issue..
Regards,
Suprithshould this work..?? and what is the parameter "compatible=xyz" how should i use it ?I dont know from memory... the parameter to do exports for lower version databases might as well be named "version" - but you will find the answer in the fine documentation.
See these links:
http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/dp_export.htm#i1007148
http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/dp_overview.htm#CEGFCFFI
Edit:
Regarding your export command
.... version=11.1.0.6.0;Are these collons ";" at the end a typo or really there?
Ronny Egner
My Blog: http://blog.ronnyegner-consulting.de
Edited by: Ronny Egner on May 20, 2010 11:48 AM -
Hi
My bussiness process is i have created stock transport order purchase order in me21n t.code doc type UB,item category 'U'then i do mb11 t.code 351 movement type Transfer posting to stock in transit from unrestricted-use.then i do the goods receipt in migo t.code.
Now my system taking goods receipt with Zero quantity without 351 movement goods not happening,is there any configuration i miss,
Regards
SamHi,
For the STO , with 351 movement type its issue goods receipt from issuing plant n the stock will b in transit( on a way), so goods receipt will not happen in receiving plant and stock value is zero. For goods receipt to happen please do GR wrt 101 movement type. Then stcok will b updated.
Hope this clears.
Smitha -
Transportable Tablespace Issue
Hi all,
I dont know somebody else has posted this error here before, I am sorry If so..
I am getting an error when I am transporting tablespace's metadata... can anyone help me about this issue ?
My OS is RH 4
======================================================================
[oracle@localhost export]$ exp parfile=/home/oracle/oracle9i/backup/export/prams.dat
Export: Release 9.2.0.1.0 - Production on Mon Apr 28 13:33:23 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Username: sys as sysdba
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
Note: table data (rows) will not be exported
About to export transportable tablespace metadata...
EXP-00008: ORACLE error 1001 encountered
ORA-01001: invalid cursor
ORA-06512: at "SYS.DBMS_SYS_SQL", line 819
ORA-06512: at "SYS.DBMS_SQL", line 19
ORA-06512: at "SYS.DBMS_TTS", line 774
ORA-01187: cannot read from file 201 because it failed verification tests
ORA-01110: data file 201: '/home/oracle/oracle9i/oradata/db1/dbf/temp01.dbf'
ORA-06512: at "SYS.DBMS_PLUGTS", line 1093
ORA-06512: at line 1
EXP-00000: Export terminated unsuccessfully
====================================================================
My parameter file looks like below
TRANSPORT_TABLESPACE=y
TABLESPACES=users
FILE=/home/oracle/oracle9i/backup/export/ts_users_28042008_10:04.dmp
LOG=/home/oracle/oracle9i/backup/export/explog.logCheck the similar sort of thread.
Re: Transportable tablespace
Regards,
Sabdar Syed. -
hello,
i have a scenario where in my project, the crm development is happening. and for a single object there are about 4 people are working and there is a single transport request with 4 different tasks. Now that each folks are working individually and completing there task.. Now the developer1 completed his task and what to test it in quality but on release of the transport it started giving implication due to other TR tasks.
Now we are unable to figure out how to resolove this activity where we can resolve this issue. also that there is yet another crm component the other 4 guys are working on..
please let me know how to resolve this issue?
best regards,
kandarajHi Kandaraj,
welcome to the club.
We had this trouble for years. Then they started to use SAP Solution manager, everybody got training courses on how to use and we can not create transport requests or transport them without creating a minimum of 3 Solution manager processes with a dozen or so steps and workflow and partner assignment and assignment of testers, developers, process administrators with approvals, releases, and and and guess what we got?
We have some 800% more of administrative overhead including full-time quaility managers.
And nothing is better than it was before:
We still face the task of unavoidable communication with people. I really hate all those developers, consultants and users.
Why can't the system do the job?
Have a nice weekend, live goes on.
Clemens
Maybe you are looking for
-
I'm experiencing a problem with my iMac in the form of a small streak across the bottom of the display, almost end-to-end, and about as high up as the top of the Dock reaches. This streak is rather faint; normally I can't see it unless the background
-
Get error msg when trying to sync music from iTunes to iPod.
Error states "The iPod "(my iPods name)" cannot be synced. The required disk cannot be found. All of my music is still on iTunes library but have lost all 3200+ songs on my iPod. Only music still on iPod is what I purschased. PLEASE HELP! Problem see
-
Need to protect pics of m¥ kids
I can not stand when some members of my extended family can snag my photos off of our IWEB page and add them to their Iphoto Library. Because I then I get bugged incessantly by my Sister-In_Law for more and more photos of our kids, so she can make a
-
Hi all Help me to search a File from a given directory.
-
Hi, I noticed that in F8REL there's a function to do reverse... but it's not active.. When I execute the list, I can select the document to release, but cannot reverse. How to use this function ? Thanks, Melissa