Transport Protocol Support by CIDX,IDOC,JMS Adapter

Hi Frnds,
I want how many protocol formats support by below adapters
JMS
IDOC
CIDX
MAIL
can any one help me..
Regards,
raj

Transport protocols;
CIDX - HTTP 1.1 and HTTPS at sender and Receiver side
JMS - Sonic MQ JMS provider, Websphere MQ(non JMS), Access JMS prov with JNDI, Acces JMS prov generically, (Read)JMS provider administerd Objects from file---at sender and Reciever side
Mail - SMTP and IMAP4 at receiver side
IMAP4 and POP3 at sendr side
IDOC - File at sender side
tRFC and File at receiver side
Regards,
Kiran Bobbala

Similar Messages

Which transport protocol is most efficient in JMS adaptor and why..???

Hi all,
Which transport protocol is most efficient in JMS adaptor and why..???
Also can anyone tell me how to check queues in the integration server and in the reciever side....???
If any one explain it rather than providing any link...i will be delighted...
Thanks....
Biplab

<i>Which transport protocol is most efficient in JMS adaptor and why..???</i>
U have to select the JMS provider for the JMS adapter under Transport Protocol.
The selection of JMS provider could be according to ur cost estimation.
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/frameset.htm
SONIQ MQ and IBM MQ series r widely used
<i>Also can anyone tell me how to check queues in the integration server and in the reciever side....???</i>
smq1 - outbound queues
smq2 - inbound queues
Regards,
Prateek

What is the transport protocol File (Axis) in the SOAP Adapter

Hi,
for a SOAP Receiver Adapter it's possible to choose 'File (Axis)' as transport protocol.
How does it work and is there some documentation about it?
Thanks and regards
Patrick

Hi,
thanks for your answers.
@Prateek
Yes I tried -> Doesn't say so much
@Vinod
The first thread didn't helped me and I have seen already the second one.
@kummari
The question is how can I use it?
@Gabriel
>The adapter uses transport protocol(File (Axis)) to send SOAP messages as text file
Could you please explain it a little more detailed (maybe with an example)?
My question is about in which scenarios it makes sense to use this transport protocol and how is it used?
Thanks and regards
Patrick

When we should use JMS based proxy services and when JMS Adapter in OSB

Hi,
Can somebody explain me when we could go for JMS Adapter and when we should go for JMS based service in OSB?
The one scenerio i can think of is when my provider/consumer is using jms provider other than WLS jms provider we should use jms adapter.
Edited by: user12883209 on Jan 5, 2012 5:29 AM

I don't think there are clear guidelines available, however here is my view.
1) OSB 11gR1 is not certified with Oracle JMS Adapter. It is certified with Oracle FTP, Database, AQ and application adapters.
http://docs.oracle.com/cd/E21764_01/doc.1111/e15867/interop.htm#OSBAG1403
2) In addition of the Weblogic JMS, OSB can also integrate with following provider without using adapter.
- WebSphere MQ
- Tibco EMS
3) if you need to integrate JMS with BPEL Process or Oracle SOA suite composite, it has built in support for generic Oracle JMS adapter. Oracle generic JMS adapter can integrate with AQ JMS (JMS providers OJMS 8.1.7, 9.0.1.4, and 9.2), TIBCO JMS, IBM Websphere MQSeries (IBM MQSeries JMS 6.0), Weblogic JMS, Apache, and Active MQ
http://docs.oracle.com/cd/E14571_01/integration.1111/e10231/adptr_jms.htm
4) If you need to integrate OSB with Weblogic JMS, WebSphere MQ, Tbco EMS it does not need JMS adapter.
Hope this helps !!!
Jayesh Patel
http://jayesh-patel.blogspot.com/
http://www.yagnasys.com/

JMS Adapter Supports below message

Hi Frnds,
I am working on one scenario i have to read and write RFH2 Message from MQ,we decided to use jms adapter.
JMS Adapter supports below Message to put in MQ,
<Data>
     <MQRFH2>
          <usr>
               <TransactionType>GL_Update</TransactionType>
               <Environment>LIVE</Environment>
               <SourceScheme>EANCM</SourceScheme>
               <SourceApplicationId>5051150003606</SourceApplicationId>
               <DestScheme>EANCM</DestScheme>
               <DestinationRouting>5051150003330</DestinationRouting>
               <OriginalRouting/>
               <MessageRecordCount>1</MessageRecordCount>
               <BusinessTransactionId>20090405193001</BusinessTransactionId>
               <ParentBusTID/>
               <ParentBusId/>
               <EECode>Y</EECode>
          </usr>
          <mcd>
               <Msd>xml</Msd>
          </mcd>
     </MQRFH2>
     <Message>
          <GL_Update>
               <header>
                    <SourceEAN>5051150003606</SourceEAN>
                    <DestinationEAN>5051150003330</DestinationEAN>
               </header>
               <detail>
                    <AuthorisedUser/>
                    <HeaderText/>
                    <HeaderReference/>
                    <PostingItem>
                         <ProfitCentre>7027101000</ProfitCentre>
                         <CostCentre/>
                         <AccountCode>0001413150</AccountCode>
                         <GlobalBusinessIdentifier>AU10</GlobalBusinessIdentifier>
                         <MonetaryAmount>0000000100.00</MonetaryAmount>
                         <GlobalCurrencyCode>AUD</GlobalCurrencyCode>
                         <RunDate>20080725</RunDate>
                         <Description>IV006270M000000000000000000001</Description>
                         <WorkBreakdownStructureElement/>
                         <BudgetRequest/>
                         <TransactionType/>
                         <TransactionNumber/>
                         <PostingKey>50</PostingKey>
                         <SalesTax>
                              <SalesTaxCode/>
                              <SalesTaxAmount/>
                         </SalesTax>
                         <PersonnelNumber/>
                         <Assignment/>
                         <CalculateTaxBase/>
                         <BaselineDate/>
                         <PaymentTerms/>
                         <MedicalReference/>
                    </PostingItem>
                    <PostingItem>
                         <ProfitCentre/>
                         <CostCentre/>
                         <SalesTax>
                              <SalesTaxCode>P3</SalesTaxCode>
                         </SalesTax>
                    </PostingItem>
                    <PostingItem>
                         <ProfitCentre>7022001001</ProfitCentre>
                         <CostCentre/>
                         <AccountCode>0001701001</AccountCode>
                    </PostingItem>
               </detail>
               <trailer>
                    <thisDocumentGenerationDateTime>20090405T072928Z</thisDocumentGenerationDateTime>
                    <thisDocumentIdentifier>20090405T072928Z</thisDocumentIdentifier>
               </trailer>
          </GL_Update>
     </Message>
</Data>
please help me on this
it possible to achieve using JMS adapter or not?? what is the alternative solution ??
Regards,
raj

Hi RSR,
JMS is the better way to connect sonic MQ.below iam attaching you few points while using JMS.
1.for the JMS adapter an external driver is needed (java archive)
2.this archive is provided by the respective provider of the queuing system
3.the driver has to be deployed via SDM , see XI configuration guide for details
4.Routing rules and sender has to be specified as for any other channel in the directory
    object model
5.the message header information is determined from the appropriate sender
   agreement for the communication channel
6.the communication channel defined must be used in exactly one sender agreement
7.at least the interface name and the sender service must be qualified in the
    sender agreement ,other fields are optional
Depending on the transport protocol selected, specify the following :
8.For Sonic MQ JMS Provider :
·        Java class QueueConnectionFactory
·        Java class queue
·        IP address or server name
·        Server port
·        JMS queue
9.JNDI JMS Provider Lookup
·        JNDI name of QueueConnectionFactory
·        JNDI name of JMS queue
·        Name of JNDI Initial Context Factory
·        Address of JNDI server
·        JNDI users
·        JNDI password with confirmation
10.
For WebSphereMQ (MQ Series) JMS Provider
·        Java class QueueConnectionFactory
·        Java class queue
·        IP address or server name
·        Queue manager name
·        Channel name
·        JMS queue
·        Character set for non-ASCll names
·        Transport/network protocol
·        Target client
11.
JMS Provider Administered Objects via File
   File name of serialized object QueueConnectionFactory
   File name of serialized object Queue
With Rgds,
MF.Haq

IDOC-XI-JMS Adapter

Hi
I have to build interface for scenario IDOC-XI-JMS adapter and legacy syetem is MQ-series. All the jar files has been deployed which is the pre-requisite to use JMS adapter.
Can anyone tell me if I should send data in file or as message.
Also if you can tell me the steps to build this interface. Please refer to some relevant blogs but would appriciate if you can explain me steps.
Points will be rewarded for the appropirate replies.
Regards

Hi,
>IDOC-XI-JMS adapter
Sender Side IDOC Adapter, Hence No Need Sender Agreement, Import the IDOC in XI System , Declare the Data Type for the Receiver side..Message Type..Message Interface as Ingoung..Do Message Mapping..Interface Mapping..In Configuratio Receiver JMS Adapter. Mention the Driver Information,User ID & Password and go ahead and test it
Regards
Agasthuri Doss

Idoc xml message in JMS adapter

Hi All,
Question 1:
My scenario is MQ series(JMS adaptr) to SAP(IDOC adptr) . In my mapping both source and target structure is same IDOC structure.Where MQ series will send IDOC xml. In such case shall i need to do content conversion at JMS adapter level or not.whthr IDOC xml can be directly handle at Mapping level without doing any content conversion in adapter level.
Question 2(viceversa):
SAP(IDOC adptr) to MQ series(JMS adaptr) . In my mapping both source and target structure is same IDOC structure.Where MQ series expect me IDOC xml. How to handle content conversion at JMS recvr adapter level.
my assumption only in case of (xml to plain) and (plain to xml) require content conversion here my Input and output is IDOC xml.

Saravanan,
As Expert Vishnu Mentioned,
>In such case shall i need to do content conversion
NO need to use
>How to handle content conversion at JMS recvr adapter level
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
Cheers
Agasthuri Doss

Transport protocol SMTP in Mail Sender Adapter

Hi Experts,
How can I use SMTP as the Transport Protocol instead of POP3 / IMAP4 protocols in the Mail Sender Adapter.
I am referring Note 856599 - FAQ Mail Adapter.pdf but not getting a l
" 9. Other Questions
Q: How can I configure my sender channel for my SMTP server?
A: You can specify your SMTP server as URL. For example, if your
server is called host, your URL should look like
smtp://host:port/ "
Regards,
Shobhit

Hi
How can I use SMTP as the Transport Protocol instead of POP3 / IMAP4 protocols in the Mail Sender Adapter.
In case of sending mail from XI you can use SMTP. To read mails you need POP3
IMAP works for both.
Yes in XI mail adapter receiver type. URL field you can use URL like
SMTP://Mailhost.com
Refer this
The specified item was not found.
Thanks
Gaurav

Support for Topics in XI JMS Adapter

Hello Everyone,
I am trying to configure Topics instead of queues for JMS Adapter and I am not able to exchange messages with Topics. However, when I change Topics with Queues in JMS configuration file on XI 2.0, the scenario works okay.
Can anyone let me know if JMS adapter for XI 2.0 or XI 3.0 supports topics. If yes, then what changes should I make in order to exchange messages with Topics via JMS adapter.
Thanks,

Hi Lalit,
No support for JMS topics in SAP XI 2.0 nor XI 3.0.
I don't know why it isn't supported. Maybe SAP wants to avoid the hassle of configuring durable subscribers. And customers forgetting to remove durable subscriptions whereby message pile up until the JMS broker runs out of disk space.
Kind regards, Guy Crets

Language support in JMS adapter with Oracle JDev 10.1.3.1

Hi,
I' using JDeveloper 10.1.3.1 with Oracle SOA Suite - ESB 10.1.3.1 in the following scenario:
1) Use Database adapter with "on insert" condition to read Student record with Chinese name (Unicode format) - ESB process
2) Use JMS adapter to push this data into "DemoTopic" as string - ESB process
3) Use Message Driven Bean's (EJB 3.0) "onMessage" method to fetch the data from JMS topic - J2EE app
4) Use JDBC executeUpdate to update this Chinese name into another database table - J2EE app
5) Finally, verify the updated Chinese name in ADF application - J2EE app
Prerequisites
1) The database charset on both sides of the flow is UTF8
2) The ADF application JSF page encoding is UTF8
3) The SOA Suite is installed on DB repository (UTF8 charset)
Result
1) The flow from Step 1-5 works.
2) But, the println of the JMS message (holding the Chinese name) gives "????" when checked with Wordpad (Unicode readable word processor)
3) Junk characters are inserted into the database
Please let me know where I'm going wrong. Also, let me know if I need to configure/set the character encoding in OC4J, or the JMS adapter and how.

Hi all,
This is been resolved by using the AL32UTF8 character set in the database. JMS adapter by default supports UTF-8. No setting/configuration needs to be done.

EDI Idoc -- Receiver JMS Adapter.

Hi,
I'm facing this issue from few days.
Sender is EDI Idoc and contains header and Footer.
This is placed in the application server of SAP system.
From there xi picks the EDI Idoc and sends to JMS server.
Facing problem on the receiver JMS Adapter.
Find the error message.
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No transition found from state: ERROR, on event: process_commence for DFA: CC_JMS_RCV_DEVWR0000000:165b1638fd823a8f822f0db8a9b1d488"
I have provoded the "dict" and "doc" value also.
Pls suggest.
Thanks in advance,
Jeevan.

Hi Guys,
There could be some problem while deploying the libraries. Check out the thread No transition found from state: STARTING
Thanks,
PP

Platforms supported by JMS adapter

Hi ,
Can anybody tell which platform/OS the JMS adapter supports ?
Regards,
Tarang

Tarang,
There is nothing to do compatibility support for JMS adapter. The one and only thing is the JMS provider like MQ-Series , Sonic MQ etc.. needs to be anlayzed for Platform/OS compatibility.
Best regards,
raj.

Missing AQ and JMS Transport protocols

Hi,
It seems that after a Purge the AQ and JMS transport protocols have disappeared from the user interface. I recall something similar happened with the SFTP protocol a few patches ago. That could be solved by running $ORACLE_HOME/jdk/bin/java oracle.tip.seed.SFTPSeedDriver. Can something similar be done for the AQ and JMS transport protocols?
Thanks

Thanks for the reply.
the patch number is 7556011.
It is possible that it is as you say and something went wrong during patching. I assumed it was deleted because of the Purge since the AQ and JMS were missing similar to the SFTP case described earlier. When comparing the transport protocols with another installation (with the same patch level and that has not had any purges done) only these two protocols were missing. Worth noting is that the SFTP and TCP transport protocols are still visible in the GUI.

JMS adapter settings for response to dynamic queue

Hello,
We are sending a message through JMS to SAP in a synchronous manner (client waiting for the reply after sending the request). The SAP is receiving and processing the message.
We configured the JMS Sender & Receiver channel as per solution given in SDN for the quetion. ( (2.8) Does the JMS Adapter support the JMSReplyTo feature? )
1. In Sender communication channel, checked the "JMS Message ReplyTo Destination" attribute of 'Adapter specific message attributes'
2. In Receiver communication channel, added the "JMS.Message.DynamicDestination" parameter and value 'true' (without quotes for both strings) in "Set JMS Additional Parameters" table
3. Added the "JMSReplyTo" header syntax in input xml message as below:
                    a. Message : <?xml version="1.0" encoding="UTF-8"?>
                             <ns0:getEmployeeInfo xmlns:ns0="namespace">
                             <employeeId>0000001</employeeId>
                             </ns0:getEmployeeInfo>
                    b. Destination = com.someDestination
                    c. JMSReplyTo= com.someReplyQueue
We have selected Transport protocol option "Access JMS Provider Generically"
But it is not able to send the reply to replyTo destination of the message.
Wondering if there is anything in the JMS Adapter setting like reply to Destination (technical term DCJMSReplyTo) which can be set to reply queue of the message (to a dynamic destination).
Please let me know in case anybody knows about the same.
Thanks & Regards,
Jayashri Rade

Refer: http://docs.oracle.com/cd/B14099_19/integrate.1012/b25307/adptr_jms.htm
•The JMS API specifies three types of acknowledgments that can be sent by the JMS publisher:
◦DUPS_OK_ACKNOWLEDGE, for consumers that are not concerned about duplicate messages
◦AUTO_ACKNOWLEDGE, in which the session automatically acknowledges the receipt of a message
◦CLIENT_ACKNOWLEDGE, in which the client acknowledges the message by calling the message's acknowledge method

JMS Adapter Testing

Hi Team
I am using the JMS adapter as a sender and the idoc as receiver. i want to test the End to End scenario. i am using the Transport Protocol as " Access JMS Provider with JNDI".
I have been provide by a program which helps to write the xml message into the queue.
My doubt is how to run this program and where to run this java program??
this is the first time i am developing scenario by using the JMS adapter
Awaiting for your replies
thanx

Hi,
Are you trying to test the scenario JMS -> PI ?
If you are trying to add a message to the queue, you can use MQ client software to do this - this allows you to connect to a remote queue manager and add messages to any queue on the queue manager.
Cheers
Colin.

Transport Protocol Support by CIDX,IDOC,JMS Adapter

Similar Messages

Maybe you are looking for