SSRS Table/Row Header does not repeat on every page when exported to PDF

Hi, I have a SSRS Report in which the rows are grouped and the Tablix has a Table/Row header. I wanted the header to repeat on every page for a group because sometimes the data from the group would be more than one page.
                               To achieve this
                              - I went to Advance mode by clicking the arrow next to column group
                              - Selected the Header Static column from Row Group
                              - Changed the following properties
                              - KeepWithGroup: After
                              - RepeatOnNewPage:
True
                              - The header columns
are set to not grow.
The problem only occurs when the nested grouped data in one of the columns goes over a page. The following pages don't have any header.
So half of the time the header row repeats but when the nested grouped data extends over one page the header does not show. Problem only occurs when rendered to pdf.
I found this line "Headings are repeated on each page only if there is sufficient room" in SQL 2008 version. But I could not find it in later versions of sql server. So does that mean it is fixed

Hi Mumblesnz1,
According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Similar Messages

Table row border does not draw

A calendar table displays fine in most browsers and systems. One user reported that one row of the calendar was missing the bottom line of one of the rows of boxes, using Mac 10.6.7, FF 3.6.17. The user took a screenshot and indeed the line is not there. Works OK in Safari for this user, and in FF, MSIE, Safari, Chrome for other users.

Hi Mumblesnz1,
According to your description, you specify value of RepeatOnNewPage as True in the report. When exporting the report to PDF, one grouped data extend over one page, and tablix header display on first page, not repeat on following pages.
As we tested in our environment(SQL Server 2008(SP3)-10.0.5520.0(X64)), it works as you required. We set KeepWithGroup as After and RepeatOnNewPage as True. After exporting to PDF, the grouped data display on two pages, and tablix header repeats on each
page. Since we haven’t found any document mentioned this issue is fixed on which version, I suggest you try to install the service pack 3 for sql server 2008.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

IWeb header does not retain its altered width when publishing to a folder

I already had assistance to widen the web page header, and thought the problem was solved as below:
I want to use Watercolor template in iWeb 3.0.4 but when I widen the page the full image does not follow. Is there anything that can be done?
iMac 7,1 Intel Core 2 Duo, Mac OS X (10.6.8), 2.4Ghz
This solved my question by Roddy on Apr 6, 2012 1:04 PM
If, for example, you mean the header background image you would need to go into the iWeb package contents and replace the image with a wider one.
Here's an example of a page that's the "standard" 980 px wide instead of the iWeb default of 700px.
Control click the iWeb application and select "Show Package Contents"
Drill down through Contents/Resources/Themes
Control click "Watercolor.webtheme" and "Show Package Contents"
Open the "Shared" folder to get the image
I used EasyCrop to crop and resize the image to 980px X 90px and replaced the original with this wider one.
However, when I publish the site to a folder, the old size is retained. I have created new pages using the new enlarged header, but alas it is not retained when I publish.
I have noticed the privileges of the altered file have changed. Originally it was assigned to be read by Wheel. But as soon as the file is altered, Wheel no longer exists. Could this be the problem? Is there a work around?
Thanks

Is there a work around?
you can change it with javascript:
http://temp.cyclosaurus.com/revolving/1px_line_border2.html
copy the code in my page.
add an html snippet to your page, paste in the code, click apply button.

Why does InDesign interactives table of contents does not always work in page mode ?

I'm working on a large document (400 pages) made of 12 Indesign documents in a book. When I export the entire book in one interactive pdf file, some the elements from the interactive table of content do not work. When I export the file as «spread», everything works, when I export the file in «pages» some elements loose their interactivity.
I'm on CS6 on Mac.
(Sorry for my English)
Any solution anyone ?

Moved from the Creative Cloud to the InDesign forum. They will be able to help you here.

TOC in PDF does not include Link OBJR tags when exported from InDesign

I'm using InDesign CS6 to export a book file to a tagged PDF. When I run the accessibility checker in Acrobat 9, I get errors about items not being contained in the Structure tree. These missing items are links for the TOC and the Index page numbers. When I look at the tags, the Link OBJR tag is missing for these elements. I can't possibly manually add them all in. Other links e.g. cross-references, hyperlinks, automatically include these Link OBJR tags when exported. Why does the TOC and Index not do so?
I've asked this question in the InDesign Forum and no one seems to know. If I don't put these tags in, what does that mean for accessibility of the document?
Thanks for your help

Glad you found something that worked. For the future ... I found that if you create the PDF from BOOK and following these steps you can get the hyperlinks to automatically tag. This will work if you are getting editable hyperlink boxes for the TOC -- I find that it is creating these (although I could swear it didn't earlier). Anyway:
1. Select all chapters in the book and create PDF with hyperlinks and bookmarks. Save as TEST.PDF
2. Open the PDF and in the Pages Panel extract the page or pages containing the the TOC from the PDF. Save this as TOCtest.pdf
3. Delete the Tags from the TOCtest.pdf file -- in the Tags Panel, select the Root tag, right click and select delete
4. Select Add Tags to Document to this same file.
5. Examine the tags to see if all the OBJLINKs are tagged. Repeat steps 3 and 4 again (sometimes it doesn't autotag correctly the first time). You may have to manually correct some of the structure -- headings and/or artifacts on these pages.
6. Save again.
7. Go back to the main document TEST.PDF -- delete the TOC page or pages from that document (assuming you didn't when you extracted.)
8. On the pages panel, Insert from file and choose TOCtest.pdf -- insert before the first page.
9. This will bring in the newly tagged TOC and it's tags HOWEVER the tags will be out of order in the tags panel. They will be at the bottom and you will need to find them and MOVE them where they should be.
Still more effort than you should have to but it worked for me.
Not sure how to record a bug with Adobe, but my testing in CS5 shows that this is NOT a new problem. CS5.5 did the same thing for me.

Page Number does not display on every page

I am having a problem showing the page number on every page. I can get it to show on the first page if I place the XML tags at the top OR if I place the XML tags at the bottom then it shows only on the last page.
I tried to use the <?body-start?><?body-end?> tags and placing the page number in front of or behind these. I have tried to insert the native word page number functionality as well as <?fo:page-number?> and get the same results.
Any help would be greatly appreciated -
Thanks,
Rob

I have inserted the page number in the RTF and it definitely shows up on the first page but not on any of the following pages.
As a side note - if I use Word's header and put anything up there it does not show up at all on the template.

Batch change does not change meta data name when exporting or copy

I use batch change to change the name of an event when photos from more than one source (camera) are imported. When I copy or export the photos the name reverts to the original meta data file. I do this to override duplicate names. For instance photos from two cameras taking pictures of the same event can have identical names such as IMG_0100. Iphoto does not show all the metadata on info but does show the change in the name when viewing info in iphoto.
Is there some way to permanently change the name on photos using a group or batch method?

No you're not changing any filenames at all.
There is no way to change a filename in iPhoto at all. What you with Batch Change is add a Title to the photo. A Title is an entry in the metadata.
You can set the name of an exported file to be the same as the title, when you export... if you choose that option.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

Control panel does not show the home page when Newsstand app is open - could this be a bug?

When Newsstand is open and I press the home button twice to access the control panel, the home screen is replaced by the Newsstand app. Is anyone else having this issue? Is there a fix?

Zephuros2000 wrote:
I press the home button twice to access the control panel ...
Pressing the home button twice does not access the control panel ... at any time.
To access the control panel, press the home button once to get to the home screen. Then swipe up from down near the home button to view the control panel.
Pressing the home button twice generally shows you the apps that are running.

My homepage does not show the latest page when I open Firefox

I have set MSN as my homepage but when I open Firefox it does not show the latest MSN page.

'''''Has the site worked normally in Firefox before?'''''
When you have a new problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help?

Firefox STILL does not open the home page when a new tab is selected

I have just 'upgraded' to FF4 and expected that the irritating 'new tab homepage load situation' would have been resolved by now: sadly, it looks to STILL be around.
MS IE has been loading the homepage DIRECTLY when a new tab is selected for about FOUR YEARS now, so I'm staggered that such a simple but very useful feature is not available in Firefox.
The obvious question is WHY??
In IE, you don't have to keep hitting the home page button to carry out a search in google when a new tab is selected, and IE does NOT need an 'add-on' to incorporate this functionality; it really is quite irritating that the function is still not built-in to FF, and the coding requiret to incorporate the function ain't rocked science Mozilla people - WHY has this not been put into effect by now?

Some people prefer a blank tab because it takes no time to load. Some people prefer their home page. Some people prefer a list of most frequently used sites. It would be convenient if all of these options were built in, but obviously no one stepped up and made it a priority.
By the way, another way to search in a new tab is: Using the search box (on the toolbar), after typing your query, either press Alt+Enter or Ctrl+click the magnifying glass. This opens the search in a new tab and saves that step.

Field value not working as "Can grow" when exported in PDF

Hi, I have a unique problem. We have a report which is using a sub-report. When we run that report in Crystal report and preview then it looks fine. This subreport is designated as "can grow" so if the field length is bigger than the size then it is coming in the second row. Everything works fine except when we export this report in PDF.
When we export in PDF then this field is not working as "Can grow" and remaining value of the fields is truncated. This is happening both in XI and 2008 version of Crystal client.
Thanks,

Hi, This is declared as bug by Business Objects Support and Product team will decide if they want to include fix in next release (or fix). This is not possible before Dec 2009 or Early 2010.
Below are the general steps on how to apply the suggested workaround:
1. Remove the on-demand subreport caption, and add an empty string to it instead.
1.1 In the u201CDesignu201D view of the report, right click on the subreport and select u201CFormat Subreportu2026u201D
1.2 In u201CFormat Editoru201D window, under the tab u201CSubreportu201D, click on the u201CX-2u201D button of the option u201COn-Demand Subreport Captionu201D
1.3 In the u201CFormula Workshopu201D window, highlight the text in the formula, and cut it. ( Ctrl-X)
( We are just copying the text, as we need to use the samething for the formula or text object we will use to replace this. )
1.4 Type the following in the formula: u201Cu201D
1.5 Click on the button u201CSave and closeu201D, to close the u201CFormula Workshopu201D
1.6 Back to the u201CFormat Editoru201D window, click on the u201COKu201D button to accept the change.
2. Create a formula or insert a text object in which you add the text or fields you will like to display
( In the following steps we will be using a formula )
2.1 In the u201CField Exploreru201D, right click on u201CFormula Fieldsu201D and select u201CNewu201D
2.2 In the u201CFormula Nameu201D window, type the name of the formula. ( Example: My subreport caption )
2.3 In the u201CFormula Workshopu201D, copy the text you cut in step 1.3, or simply add the database fields and text you will like to display for your on-demand subreport caption.
2.4 Save and close the formula by clicking on the u201CSave and closeu201D button
3. Insert the formula over the on-demand subreport, and resize the field to be of the desired length.
4. Format the formula to display like a hyperlink. ( Blue font and underlined text )
4.1 Right click on the formula inserted in step 3, and select u201CFormat Fieldu2026u201D
4.2 In the u201CFormat Editoru201D, under the tab u201CFontu201D, set the color to blue
4.3 Still under the tab u201CFontu201D, check the u201CEffectsu201D option u201CUnderlineu201D
4.4 Under the tab u201CCommonu201D, check the option u201CCan Growu201D
4.5 Click on the u201COKu201D button to accept the change
5. Move the formula to the back in order to ensure you can drill-down on the on-demand subreport
5.1 Right click on the formula inserted above the on-demand subreport and select u201CMove u2013 To Backu201D
Now, when exporting the report to PDF format, the formula used to replace the u201Con-demand subreport captionu201D that displays more than one line will all be exported.
This workaround has following limitations:
The User can see the service description in two lines because of the u2018Text Objectu2019, the On demand subreport is not growing into the second line in the crystal report since we removed the caption.
So the user has to carefully click on the first line of the description in the main report to open the subreport. If he clicks on the second line then it wonu2019t open the required subreport and it may create confusion.
If we manually stretch out the subreport to occupy two lines space then it will leave a gap in between when we have only 1 line service description.
So plan ahead of time about how lengthy text in su-report would be.

When I open Firefox to my home page then go to a secomd page firefox does not remember my home page when I try to go back to my home page by using the back button

When I open up Firefox it goes to my home page, then I surf the web but when I go the the back button it shows my history but not my home page (or the first page I went to).

Do you get the same two tabs when you launch a new window (Command+n) or only at startup?
You may want to check your extensions in case something snuck in. You can review and disable those on the Add-ons page. Either:
* Command+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable.
Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Does that shut down the extra page?

Aperture does not recognise my .mcac membership when exporting to .mac

I have been trying to update a web gallery and have had problems with images being extended or squashed when they are displayed on the web. After trying several times to export and get the site to exhibit properly I now get a prompt when a click on "publish to .mac" Saying that I don't have a" .mac account configured on this computer". Oddly enough I have the idisk synced on the desktop and am logged into my .mac account.
Has anybody seen this before and what can I do to fix it?
thanks
leadparrot

What happens if you log into the .Mac web site? Do you access it OK?
If so, check your Keychain for a corrupt/old password or userid.
If you're using .Mac backup, or .Sync, then keychain should be OK.
In this case, quit Aperture and then trash your ~/Library/Preferences/com.apple.Aperture.plist
Restart Aperture and try again. (Note: you'll have to change your Aperture/Preferences back to your needs.)
Hope this helps.

Aperture does not recognise my .mac account when exporting to .mac, help!

When trying to update my web gallery, I am getting a message stating "no .mac accoount registered on the computer." Can anyone help with this? I have the Idisk synced on the desktop and am logged into my .mac accoount.
Any help is appreciated
Jeff
macbook pro Mac OS X (10.4.7)

What happens if you log into the .Mac web site? Do you access it OK?
If so, check your Keychain for a corrupt/old password or userid.
If you're using .Mac backup, or .Sync, then keychain should be OK.
In this case, quit Aperture and then trash your ~/Library/Preferences/com.apple.Aperture.plist
Restart Aperture and try again. (Note: you'll have to change your Aperture/Preferences back to your needs.)
Hope this helps.

Group Header is not repeating when exported to pdf in 2008 r2

Hi
i have a typical scenario here , when i am trying to repeat my group header it is working fine in report viewer but when i exported to pdf it is not repeating. yea it is working fine in excel.
could some one help me in this as i tried various ways but couldn't able to figure it out
PS: i am using 2008r2
if this is the issue in 2008r2 , did it got fixed in any new version please suggest.
thanks
sharath

Hi sharath,
Based on my understanding, the group header doesn’t repeat when you export report to PDF file.
In Reporting Service, the RepeatOnNewPage property has effect on static row members only and where KeepWithGroup is not None. If value for KeepWithGroup is None, the group header will not appear in a new page. As we tested in our environment, we set FixedData
as True, KeepWithGroup as After and RepeatOnNewPage as True, the group header repeat in second page when export to PDF file. Please refer to screenshot below:
So in your scenario, please check if you have set KeepWithGroup as After. Then export to PDF again to check if group header can repeat in multiple pages. If issue persists, please provide some detail information about your report design. If possible, please
provide some screenshots about your results before and after perform PDF render.
Reference:
Display Headers and Footers with a Group (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

SSRS Table/Row Header does not repeat on every page when exported to PDF

Similar Messages

Maybe you are looking for