Transport type when copying transports to other system

Hello,
probably a simple question. I have to transport couple transports from one system to another, there is no link between the systems.
I have created one (mass) transport which include objects of these transports, but I am not sure what type of the transport should I choose (transport of copies, relocations (it is not clear to me)), also I do not want to release the one big transport to Q systems transport queue. I just want it to create the cofiles to move to other system.
So question will be how to copy this one transport (via cofile, data file), or if it is possible to release transport without target system?
Thanks in advance
Martin

Hi,
Please ensure that STMS is configured in your system, since it is a stand alone system you can make it as a Domain Controller also. After that goto transaction se10 and check for the transaction which are in modifiable state. Then relese the transport starting from the inner request corresponding the transport request created by you.
Note that once you release this trasaction data files and cofiles are created in trans directory, and you have to manullay copy these files to the system in which you want to transport these files.
After that goto transaction stms_impot in the target system and add this transport request and import it. the data in the transport reuest will qutomatically gets imported the.
Thanks
Rattandeep

Similar Messages

Release of a transport does not copy file to other system

Hi All
I am struck with an issue. When I release a transport request from my DEV server, The corresponding files donot get copied to the local transport directory of QAS system, resulting in the non listing in the import queue of the QAS system.
I have checked the mentioned
1. STMS configuration is all active and all nodes are attached to the domain controller (DEV) with all green buttons
2. Single global transport group is configured for all the systems
3. QAS server can access the global transport directory in DEV system
4. RFC connection to QAS server from DEV server is fine
5. RDDIMPDP is scheduled in 000 client of DEV system through DDIC using Report RDDNEWPP
6. RDDIMPDP is scheduled in 000 client of QAS system through DDIC using Report RDDNEWPP. However, in SM37, the schedule does not get displayed.
7. The /sapmnt/sap/trans directory of QAS system is writable
8. /usr/sap directories of DEV and QAS system is shared as saploc and sapmnt
Any ideas of what could be the error.
Regards
Lokesh

>
Lokesh Gupta wrote:
> 2. Single global transport group is configured for all the systems
>
> Lokesh
Hi,
All Systems belonging to the same transport group must share
the same DIR_TRANS. You need to setup diffrent Groups, if you like
to use a local transport directory.
WARNING: When using diffrent groups, but DIR_TRANS on these systems
points to the physical same directory, your transport files will get damaged
when trying to operate them !!! Read the documentation carefully to know
about the pitfalls of local transport directories.
Volker

Transport Error when Importing TR to QA system

Hi All,
We are receiving the below error when transporting a TR to Quality system.
Detail Error message:
Execution of programs after import (XPRA)
Transport request   : XXXXXX
System              : XXX
tp path             : tp
Version and release: 372.04.88 701
Post-import methods for change/transport request: XXXXX
     on the application server: XXXXXX
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
Post-processing taking place in client 500
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet MJN in Client 500 for RFC After Import
Error in remote call of destination After Import
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
     BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
Post-import methods of change/transport request XXXXXXXcompleted
       Start of subsequent processing ... 20120210151806
       End of subsequent processing... 20120210151806
Execute reports for change/transport request: DB1K903324
     on the application server: mbixq2cs01
Reports for change/transport request XXXXXXXX have been executed
       Start of................ 20120210151806
       End of.................. 20120210151806
Execution of programs after import (XPRA)
End date and time : 20120210151806
Ended with return code: ===> 8 <===
Can any one have faced this kind of issue while transporting TR? Request to share your tought?
Regards , Trine
Edited by: trine_h on Feb 10, 2012 4:46 PM

Hi,
Thanks Rich for the help. But I did not find any dump log in ST22.
Here with I am attaching details TR log with Message number, it may give some clue. Sorry I am attaching long messages. I know very difficult for people to got through all the message. Sorry for that.
Log File:                /usr/sap/trans/log/DB1R903324.QB2
000001
TP                  199
1
000002
TP                  162
1
Execution of programs after import (XPRA)
000003
TP                  101
1
Transport request   : XXXXXXXXXX
000004
TP                  102
1
System              : QB2
000005
TP                  108
1
tp path             : tp
000006
TP                  109
1
Version and release: 372.04.88 701
000007
TP                  198
1
000008
PU                  126
2
Post-import methods for change/transport request: DB1K903324
000009
PU                  111
4
on the application server: mbixq2cs01
000010
PU                  122
2
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20120210151806
000011
PU                  186
2
Post-processing taking place in client 500
000012
R7                  501
2 E
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
000013
UJT_EXCEPTION       047
4
Start After Import for AppSet XXX in Client 500 for RFC After Import
000014
RSPC                051
3 E
Error in remote call of destination After Import
000015
R7                  501
2
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
000016
UJT_EXCEPTION       043
4
Nothing to delete.
000017
PU                  133
2 E
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
000018
PU                  135
3
RS_AFTER_IMPORT belongs to package RS
000019
PU                  136
2 E
The errors affect the following components:
000020
PU                  137
2 E
BW-WHM (Warehouse Management)
000021
PU                  123
3
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20120210151806
000022
PU                  127
2
Post-import methods of change/transport request DB1K903324 completed
000023
PU                  128
2
Start of subsequent processing ... 20120210151806
000024
PU                  129
2
End of subsequent processing... 20120210151806
000025
PU                  110
2
Execute reports for change/transport request: XXXXXXXXXXX
000026
PU                  111
4
on the application server: mbixq2cs01
000027
TP                  000
3
000028
TP                  000
3
000029
TP                  000
3
000030
PU                  117
2
Reports for change/transport request XXXXXXXXXX have been executed
000031
PU                  118
2
Start of................ 20120210151806
000032
PU                  119
2
End of.................. 20120210151806
000033
TP                  162
1
Execution of programs after import (XPRA)
000034
TP                  110
1
End date and time : 20120210151806
000035
TP                  111
1 E
Ended with return code: ===> 8 <===
000036
TP                  199
1
Regards, Trine

Transport Error when Importing appset in target system

We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
      Start of subsequent processing ... 20110519104427
      End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
      Start of................ 20110519104506
      End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

Transport issue when copying a web dynpro component

Hello All.
I have a web dynpro component lets say ZTest and now I want to copy this, I gave the new one a different name i.e. ZFINAL, now when I copied, it asked me for the trasnport and when I asked to create a new transport I got this message "Class ZIWCI_ZFINAL does not exist" and then I clicked the green arrow again and it created a transport for me. After this process I activated my web dynpro component successfully, my web dynpro component has 3 views and 3 windows. When I looked at my new transport (for ZFinal), I only saw three tasks attached to teh transport i.e. 1. Interface 2. Info Object from the MIME Repository and 3. Web Dynpro Component but I didn't see Controller (Web Dynpro), Definition (Web Dynpro) and View (Web Dynpro) attached to my transport. Now I wonder when I release my transport to Q I may have issues.
Note: My old trasnport (which has Ztest)has all the missing objects: (Web Dynpro), Definition (Web Dynpro) and View (Web Dynpro)

I resolved it myself.. I had to write the transport entry manually for the views and windows and even the component controller definition.

How to transport Custom Characteristics in consolidation to other system?

Hello,
For consolidation purposes i was creating new characteristic for table ECMCT with T.CODE CX0A1.
I was genereting the changes i have made, but transport was not created.
Can someone tell me how to transport custom characteristic?
Best regards,
Avishai

Hi Eli,
The characteristics can not be transported with this one.
Our problem comes from table MCDX.
The content for object dependency is not the same in Development and quality system and I can't find how to update it.

What is the "iOS rich content paste pasteboard type" when copying from Safari?

When I copy text from a website in Safari, two pasteboard items are created. This is the output of [pasteboard items]
        "Apple Web Archive pasteboard type" = < [...archive...] >;
        "public.text" = "pages of a journal,";
        "iOS rich content paste pasteboard type" = <694f5320 72696368 20636f6e 74656e74 20706173 74652070 61737465 626f6172 64207479 7065>;
What is the "iOS rich content paste pasteboard type" all about? What does the data actually represent? Is this representation ever used by other apps?
Thanks.

Since your problem is not connected to your hardware, it would probably be better to post it in the software forum for the OS X version you are using:
https://discussions.apple.com/community/mac_os?view=discussions
MS Word's spellcheck is generally independent of OS X, so you may want to also search/ask about how to keep its language setting from changing in the forum devoted to that product (if you have not done so already):
http://answers.microsoft.com/en-us/mac/forum/macword
I think there is most likely no way to change the way Safari and Clipboard behave. The best chance is with Word.

Mass Maintenance for Conditions and copying them to other system

Hello folks,
1)I'm wondering wether there's the possility to mass-maintain conditions.
So far I've been doing this manually in ...
MASTER DATA > PRICES AND CONDITIONS > TX "Maintain conditions"
Does anyone have any idea about this?
2)There is report for transporting marketing attributes from, e.g., test- to productive System. Is there anything like this for conditions as well?
Thank you for your ideas!
Greetings from Hamburg!
Hauke Böhmer

Hi Yacoub
Please see if you setup standard t-code MASS for sales prices maintaince in a mass way.

Anyone get this when opening projects on other systems

Have a project running on my mac pro (system A)... put everything on an external drive... open it on another identical system (system B), and get this:
Premiere CC 2014 Timeline Issue - YouTube
It does not matter which way I go... (A to B or B to A) every time I bring the project to another system I always get this issue.
The only time it opens ok is when the project relinks media from the system the project was saved on.
The best workaround is to start a new project and drag the project I want to open into it.
Cheers

Sorry but ... from the PP manual... if you have ever read it???
Clip instance
A dependent reference to a source clip, used in a sequence. Each time you add a clip to a sequence, you create another instance of the clip. A clip instance uses the name and source file reference used by its source clip. While clip instances are not listed in the Project panel, they are differentiated in the Source Monitor menu if you open instances there. The Source Monitor menu lists instances by name, sequence name, and In point.
Hope that helps you understand the correct terminology.
Anyway, I was wondering if anyone can try to duplicate my issue??

Portal not picking up the changes when I transport to live system

Hi All,
I created a report by using report designer in dev. system when I run the report it is picking up the changes in the portal but when i transport the report to live still i can see the changes i made in the report in report designer but when i run the report it is giving me the same old version of the output instead of new changes.
Could any one help....please

Hi
Open the workbook
Place your mouse on the result area and right click...there one window will open ....in the properties...go to Interaction tab...and tick mark..third option refresh query when opening workbook
Save the workbook
Again change the query and see your change is saved in the workbook
Assign points if useful
Thanks
N Ganesh

Generating transport for report to set it up on other system

hi friends,
how can i package a report i wrote with the corresponding ddic-tables that are needed in a convenient way so i can send it to somebody and it can be imported into their system and be executed easily ?
thanks,
clemens

There are two ways to do this:
1. Create a transport request for the report, copy the same from the \usr\sap\trans directory into a cd and send it across.
2. Download the report (Utlities > More utilities > Upload/Download > Download) into a txt file, send that across. The developer on the other system will need to upload the file into a new report and save it. Note: All includes in the report will need to be downloaded separately.
Sudha
Message was edited by:
Sudha Mohan

Copy Transport Request (customizing-workbench) between different systems

Hello guys !
I have a question.
I can copy transport request of customizing and workbench from ECC 6.0 system to another ECC 6.0, with the same levels of support packages and patch realease, but one of the systems in Windows and another in AIX?. The database is the same: oracle.
Thanks guys!!!
dcardena

Hi Dcardena,
You can very well copy the request. Different OS platforms won't make any difference.
Regards
Sourabh Majumdar

Transporting variants to other systems

Hi
This is kind of a basis issue, I have a report transported to Quality ( and to production). Now i have to create a variant in Development server and transport it to Quality (as i do not have rights to create variants directly over there).
I understand that in case we have named the variants CUS&<variant> , it gets transported to other system along with the report.
Now the scene is , my report is already in production, and i have to supply the variants from development server.
Revert at the soonest.
Regards
Alok Pathak

Hi Alok,
You can create the varinat in the dev system & tie it to a Transport Request using the standard Program RSTRANSP.
Regards,
Suresh Datti

Copying Wage Types into a Transport

Hi All!
I need to load some wage types into a transport and send them to another client. Does anyone know of a way to include all the tables that the wage types are loaded into and the setting into one transport without having to go to each and every table?
Thanks,
Jeff

Hi jeff ,
I think at the time of Update you created the Request , If it is created then .
You can pull the request from SCC1 make sure all your tables in one request and one more thing SCC1 you while transporting from dev to Testing .
For Production go with the procedure instead of taking risks.
SCC1 give the source client and the transport req no.
and check on the inclusive task for req.
Start immd.
Let us know it helped you or require other thing.
Manoj Shakya.
Techno-Fuctional Consultant
SAP-HR
******(Useful answers should be rewarded)

How can I see when a transport has been made in an other environement?

Hi,
Is there anywhere in SAP where you can see if a transport as been made in an other environement? I'm trying to figure out if a transport in the DVL environement has been made in the SANDBOX environement. I tried SE10 transaction, but it seems that once the transport has been made in an other environement, it doesn't appear in this transaction anymore.
Thanks, points will be given if helpful.

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

Transport type when copying transports to other system

Similar Messages

Maybe you are looking for