Trapping sync errors with eVB sync code??

Hi,
Is there any way to 'trap' errors that occur when syncing from within an app that is using the sample eVB sync code?
I'm talking about displaying the same type of error messages msync shows when an error occurs.
Thanks.

Hi there,
The best answer I've come up with so far is to look at what gets written in the file \syncerr.txt on the device, then delete it, so that after the next sync you know that all the errors in the file relate to that sync.
I haven't implemented this in practice yet, it's just my best guess and I'm putting off doing it until later in my project.
Does anyone from Oracle have a better answer?
At the moment, I'm trapping the fact that the sync didn't work using this code:
On Error Resume Next
Dim mySync As MSync.sync
' Omitted stuff to set up sync parameters etc
mySync.Sync
If (Err.Number <> 0) Then
MsgBox "Sync failed!"
Else
MsgBox "Sync completed!"
End If
But this doesn't tell me why, hence the theory of looking in \syncerr.txt
Simon.

Similar Messages

  • Sync error with mp4 on ipad

    How to resolve a sync error with ipad on mp4 file?

    Is it a file that you converted? If it is, try converting it again. Or at least be a bit more specific in what you are talking about.

  • Itunes dll errors, APPLE SYNC error on bootup, sync error.....solution!

    One brilliant guy came up with this solution in this forum and has worked on 5 straight PC's. The thing is, I found another thread that helped also. In addition to this, if you are getting the Apple Sync Error, or still have problems after doing this procedure, go into uninstall programs and remove the MobileMe application. It is appearing to be a major contributor to the errors with Apple Sync! Thank you for your help guys!!!!!!
    Okay, we're going to uninstall both iTunes and Apple Application Suppport this time. When we reinstall iTunes, that should reinstall Apple Application Support as well. We'll take a few additional explicit precautions along the way too. Best to print these instructions out, because at one stage of proceedings you won't be able to use a web browser.
    Preliminaries
    Download and save a fresh 64-bit iTunes installer to your hard drive. (Don't run the install on line and don't start the iTunes install just yet.)
    http://support.apple.com/kb/DL925
    Now, quit QuickTime (if you have that open) and Safari 4.0.4 (if you have that installed and open). Both applications use Apple Application Support, and they will interfere with the uninstall if you have them open.
    Uninstall phase
    Head into your "Uninstall a Program" control panel. Uninstall iTunes. Uninstall Apple Application Support.
    (From this point on until we reinstall Apple Application Support, neither QuickTime nor Safari 4.0.4 will be able to run.)
    Next we'll remove any leftover program files and folders.
    (1) Open "Local Disk (C:)" or whichever drive your program files are stored on.
    (2) Open the "Program Files (x86)" folder.
    (3) Right-click on the iTunes folder (if it still exists) and select "Delete".
    (4) Staying in Program files (x86), find and open the "Common files" folder.
    (5) Open the "Apple" folder.
    (6) Right-click on the Apple Application Support folder (if it still exists) and select "Delete".
    Now empty your Recycle Bin and restart the PC.
    Reinstall Phase
    After the PC restarts, do not open any other applications. Disconnect from your network and/or the internet. Switch off all your security software (firewall, antivirus and antispyware).
    Now start the install by doubleclicking the iTunes64Setup.exe file you downloaded earlier.
    Reenable all security software prior to reconnecting to your network and/or the internet.

    Thanks to all on this thread..  same problem, same solution.
    This time it was on Win 7, the setup worked fine for awhile, and then SWMBO "did something" and it stopped working.  Much debug later, found the log message and realized that there was a streaming problem, but could not figure out if it was the router, my wireless network (I'm using it tied to my existing wireless network) or what.  New hardware, fully up to date firmware..  Argh!
    I finally found this post, found the offending file ( ..\Users\xxxxxxx\AppData\Roaming\Apple Computer\Preferences\com.apple.iTunes.plist ) and simply moved it to another folder.  Restart iTunes, and all is copacetic.
    Clearly this is a software issue in iTunes, and is happening accross HW and SW platforms for better than 2 years now.. 
    I love the device, but the only reason I have it is to drive the stereo.  They should fix this one...

  • .Mac Sync Error and no syncing

    I get a .Mac Sync Error with this notation. *-[NSCFDictionary set: Oject for Key:] nil value
    I have Synchronized my G-4 to .Mac. In other words .Mac should be the same as my G-4. When I try to sync my iBook and Mac Mini to .Mac I get the above error message. All 3 machines are running 10.4.2
    Help will be appricated
    Mac Mini, G-4, and white iBook   Mac OS X (10.4.2)  

    I've had the same issue for a while, but I think I have now managed to resolve this.
    Using Workgroup Manager:
    Select user(s) in question
    Select Preferences
    Select Mobility
    Select 'Rules'
    Select 'Home Sync'
    Under the Manage Options, add to 'Skip items that match any of the following'
    for match choose 'ends with' and add:
    .pages-tef
    .numbers-tef
    .keynote-tef

  • DTM sync error with outlook calander

    i just got the storm two,  while trying to sync it to my outlook calander it stops part way through with an error.  i'm running windows 7, and office  2007.  the error i'm getting is:
    Problem signature:
      Problem Event Name:                        BEX
      Application Name:                             DesktopMgr.exe
      Application Version:                           5.0.1.18
      Application Timestamp:                     4a8f1751
      Fault Module Name:                          MsOutlookConnector.fil
      Fault Module Version:                        7.1.1.270
      Fault Module Timestamp:                  4a449ff8
      Exception Offset:                                000518a9
      Exception Code:                                  c000000d
      Exception Data:                                   00000000
      OS Version:                                          6.1.7600.2.0.0.256.48
      Locale ID:                                             1033
      Additional Information 1:                  ecc9
      Additional Information 2:                  ecc9a3317b7cf078d523d82b4b976666
      Additional Information 3:                  89b4
      Additional Information 4:                  89b47ff0708c6fa6fbb69667ff437551

    Please don't double post your questions in the forum. It is rude.
    http://supportforums.blackberry.com/t5/BlackBerry-Storm-BlackBerry-9500/DTM-sync-error-for-calander/...
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Sync errors with Windows 8 phones.

    Has anyone been having issues with syncing Windows 8 devices? We have about 50 HTC 8X phones and around 10% of them are having sporadic sync errors. We also have some of the Nokia WP8 devices that exhibit the same issues. While the WP8 device is problematic, we can have an Android or iOS device working next to it just fine. The error on the device is 85002012. Would be interested to see if this is consistent among users of GMS2, or is there something wrong with us. I did open an SR with support and I can report back any findings from there.

    In article <[email protected]>, Stevecim wrote:
    > Don't think its a cert issue...
    We can't rule it out and the Window8 systems have demonstrated
    themselves to be particularly picky about certs. It could well be that
    something else happened to change in the same time you upgraded that is
    confusing the issue (always frustrating when that happens). Check your
    certs to be sure is how we rule them out and the Heartbleed issue has
    brought lots of such tools out. One I've been using that may help you
    is
    https://sslanalyzer.comodoca.com/
    Are you actually using the same cert you were running before? Just in
    case the upgrade replaced your cert.
    Andy of
    KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!

  • Home Sync errors with Chrome files

    Recently a bunch of users in our office have been getting constant Home Sync errors, most commonly with Google Chrome files. File Sync opens and lists a number of errors syncing files including:
    Favicons
    History
    History Index 2012-02
    History index 2012-03
    Network Action Predictor
    Shortcuts
    Web Data
    among others. Any idea what's going on? Are the files locked by Chrome or something so Home Sync generates errors? Did something change in Lion or Chrome in the last few weeks because this never happened previously?
    Lion 10.7.3
    Chrome 17.0.963.65

    I ended up having to enforce this from our Open Directory server. You could uncheck "Library" from your homesynced folders on a per machine basis but that will have other consequences because things you would like to have backed up/synced won't be.
    From our mac server: Workgroup Manager->(Computer group name you want to manage)->Preferences->Mobility->Preference Sync->At logout+manually
    So I don't have it sync on login or in the background, only when they are logging out, hopefully warnings won't show up or it will be less intrusive.
    Homesync still has a lot of rough edges, I wish there was a cleaner option

  • Outlook Sync Error with Recurring Meetings on SharePoint Calendar

    We have a SharePoint (Foundation 2010) calendar that users also connect to Outlook (2010/2013). We are experiencing a problem with emailing recurring meeting requests to the SharePoint calendar; the item is received and populated properly on the SP calendar
    but Outlook fails to sync the item.
    The Outlook client then displays a send/receive error: [ Task 'SharePoint' reported error (0x80004005) : 'Failed to copy one or more items. For details, see the log file.'
    ] The error in the log file reads: "Error mapping item #140"
    This issue only occurs when recurring meeting requests are emailed to the SP calendar list. Recurring meetings sync properly with Outlook when the meeting is created directly on the SP site and when created directly on the calendar view within Outlook.
    I will appreciate any insight to this matter.
    Thanks,
    Josh

    Hi,
    This issue may occur if Outlook cannot connect to the Sharepoint List so that
    Outlook changes cannot sync to the Sharepoint. Please try the following steps and check if it helps:
    1. This error message could be caused that the PC with the Outlook installation couldn´t access the CRL from the HTTPS certificated used on the SharePoint server. To check that open the sharepoint Web site, and check the SSL certificate. There is an entry
    for the CRL. Now check from the affected PC if the CRL could be accessed.
    2. Check AAM configuration and we can try to browse the URL
    http://intranet ; then we can recreate the connection to Sharepoint in Outlook, try to sync it and then check the result
    See this thread with similar problem:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/615533e7-17e1-463e-a944-1d66baa486bc/sharepoint-2010-calendar-synching-to-outlook-2010-issue?forum=sharepointadminprevious
    Since this question is also related to SharePoint, you can also post in SharePoint forum to check if we can get good ideas there:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/home?category=sharepoint
    Regards,
    Steve Fan
    TechNet Community Support

  • Sync errors with Outlook calendar

    I know this has been raised in various forms in other posts, but there doesn't seem to be any consistency or permanent resolution.  I have a Curve that I am syncing with Microsoft Outlook.  Environment is Vista, Outlook 2007, BB Desktop Manager 5.0.1.18.  Contacts, tasks, and notes sync fine.  Caledar sync sometimes works sometimes doesn't.  Error message varies.  Now have it configured to always remove everthing from the device and just copy Outlook entries.  Still get errors - sometimes.  I've been working on this for almost a year now - trying different solutions - from removing the intellisync folder to compeltely uninstalling and reinstalling desktop manager. This is actually my wife's phone and she's about ready to ditch the phone and go back to her old Treo.  I'm not the only one with this problem - there are similar posts in all the BB forums.  And I'm fed up with hearing the problem is with Outlook.  Outlook may be a problem, but the intellisync software should know how to deal with it by now.  Someone please help !!!  before my wife files for a divorce...

    Same problem - no solution yet and lots of attempts to detect and repair Outlook 2007 as recommended - no change.

  • Sync error with open Office 2011 files

    Have recently installed Microsoft's Office:Mac 2011 Home and Business. Have a setup with MA and PHD syncing. Whenever an office file is open FileSync reports a syncing error of that file, which after a while is annoying. Didn't get this with Office 2004. Does anyone have a remedy for this?
    Thanks
    Tomas

    I've not noticed this issue, and I have moved several movies over, and they fall into the 500-600MB range. Have you tried any of the troubleshooting steps? Try to power the phone off/on, then try a reset. That is accomplished by holding down the home button and the sleep/wake button together until you see the Apple logo, then releasing. Ignore the screen with the slide to power off option. If that doesn't seem to do it, it could be one of the files is having a problem. You say that eliminating all of them lets the sync work. Do you have USB 2.0 ports? Try to add just one file at a time to the sync and then see when the sync finally fails. It could be something corrupt in one of the files, and you might be able to elimiate the one by this method. If possible, then redo that particular file, be it a music file from CD or video, and then try again. See if any of this helps.

  • What's with sync error 1140 when syncing iphone?

    This happened both with my iphone 4 and 4s when plugged via usb into my iMac. Is there a relationship to photo's? Error 1140 prevents syncing.

    I got this form http://maltaphonerepairs.com/how-to-fix-error-message-1140-when-syncing-iphone-5 /
    How To: Fix Error Message 1140 When Syncing iPhone 5
    Posted on October 6, 2012
    The following is done using iTunes:
    Un-select sync | Apply.
    Click on Sync.
    Try and Sync photos. Click on Apply and then press Sync.

  • IDick Sync Error, with no info about problem!

    I keep getting the following iDisk Sync Error on my MacBook Air but it doesn't give me any info to resolve -
    " Your iDisk did not finish syncing because a problem occurred, please try again later."
    My sync setting are set to sync automaticlly with my MobileMe account and the problem has been happening for 5 days without me being able to resolve. When I dismiss the messag eit keeps popping bavk up every 2/3 minutes
    I am using OS X v10.7.2. Can anyone advise how to resolve?
    Thanks
    Sean

    Just wanted to add:
    Even when I just change the name of the voice memo in iTunes I get the unknown error -13019.
    Name changes on the iPhone app are not reflected in iTunes (the still have the date/time stamp as a name there). But sync works.
    When I change the name in iTunes too to match the name on the iPhone the sync is not working.

  • Sync error with centro - please sync eas account

    im using a centro with active sync to sync my e-mail from an exchnage server. all my contacts and tasks sync just fine but i get an intermittent error message when syncing e-mail the message is "ASSERT FAILED! AirSAMSMEmailPrv.c (slk 04c7)860" when this happens no more mail is synced.
    I will look at the last message that was synced to my palm, then from my live (outlook) mailbox i will start moving the new messages to a folder, then all of the sudden my palm will start syncing ok again without any more errors.
    this is an intermittent problem and doesnt seem to be related to the type of message i am recieving. i called sprint and also spent time on the phone with palm and nobody could figure it out. they are saying it has to be a configuration setting on out active sync server or exchange but im not buying that one! other active sync users are fine, other handheld users are fine. i have used my mail account on other PDA's (inluding palm based ones) without any errors.
    Post relates to: Centro (Sprint)

    I've got pretty much the same issue.  I ended up deleting the mail setup for my company and re-input my mail settings again.  Did a few tests and everything is pushed to my Centro just fine for now.  I'd like to last longer than a day or two though!  Everything worked initially just fine then I noticed that I wasn't getting email push alerts and when I tapped Remote to look up people in our company lists, it wouldn't find anyone...some of the time.  Sometimes it worked just fine.  Having recently been migrated to Exchange 2007, I changed the server to what I was told and again it seemed fine...for a bit.  I'm sure this little glitch will be corrected with some for up patch/upgrade, but it's a little inconvenient.  Love the phone though.  Here's what I sent to the IT department of my company a couple of hours ago to hopefully get some answers: 
    I was recently told to change my current mail server on my Centro to xx.xxx.xxx from the old one, xx.xxx.xx, due to being migrated to Exchange 2007. I previously used a Treo 755p with no issues.
    Since switching to my newer Centro and updating the mail server in Versamail, the push email function hasn't been working like normal. More often than not, I have to tap the sync button only to see that a lot of new email is not making it to my device automatically via a push alert. Looking up contacts remotely sometimes tells me that a name cannot be found but when I try it a little later, it sometimes works. The device sometimes requests that I tap the sync button since there was some type of error. This causes it to re-download content that has already been reviewed and deleted like it's the first time.
    I just received another error message saying something along the lines of a server certificate does not match the server and to contact technical for further assistance. This happend after new email was downloaded via the sync button.
    It seems that the push email and remote contact lookup only work a small portion of the time. Is there any adjustment to the mail server that I need to make or is it something on the backend that needs to be looked at? Everything at least settings-wise appears to be set up correctly. Perhaps a different mail server address needs to be put into my Centro that's a better fit for our recent email migration?
    All other data functons i.e. Web browsing and text messaging work fine. It's just the email app configured for the mail server that seems to be the issue. I look forward to your reply.

  • Syncing error with Itunes 9

    Hello there,
    While trying to synch my 3GS, I was getting a type of syncing error window (the one that asked you to debug), unfortunately I don't remember what the error message was. So after reading some posts, I tried going into preferences and "reset synch history". After that, I no longer get the error message but my Itunes freezes when it trys to sync.
    Should I reinstall Itunes? If so, will I lose my Apps?
    Does this have to do something with version 9? If so, should/can I reinstall a previous version of Itunes?
    Thanks

    The problem continues with the recent update to iTunes v. 9.1.1.12.
    The last version which worked perfectly was 9.0.3
    Please advise.

  • Sync error with iTunes

    My iPhone has been having a weird problem. When I sync it with iTunes, it gives me an error message saying "The iPhone 'xxxx (iPhone name)' cannot be synced. An unknown error occurred (13019)." However, when I look at my iPhone, everything that should have been synced is, including new information that was not on the iPhone prior to syncing.

    I have the same problem. Last week, I went to an Apple Store, but there were no Genius appointments available. I was redirected to a manager, who explained how to fix it. It didn't work for me, (I still no longer have any music from my Itunes library on my phone), but maybe it will work for you. Here are the instructions I was given:
    1. Plug your phone into a USB port on your computer.
    2. When the error message pops up, click out of it.
    3. In the menu on the left, right-click on your Iphone; Left-click "transfer purchases."
    4. Right-click on your Iphone again; Left-click "back-up."
    5. Right-click on your Iphone again; Left-click "restore from back-up."

Maybe you are looking for

  • Create SRM Bid Invitation from R/3 Schdule Agreements

    Hi Masters, How do I create Bid Invitation in SRM from Schedule agreements in R/3. How much of customization is involved for the same. Thanks in advance.

  • RS232 problem: LabVIEW not transmitting \03 (ETX) or (sometimes) last byte

    Hi there, I've coded small VIs to communicate with RS232 devices since LabVIEW v3.x. I'm now trying to write a VI to talk to an esoteric photon detector. Using a serial line sniffer, I have verified the serial line setting s and can communicate with

  • Firefox switches off adobe flash plugin during debugging

    Firefox 3.6.4 switches off adobe flash plugin during debugging == This happened == Every time Firefox opened == when my application is stopped on breakpoint in adobe flash builder firefox switches flash plugin off in 15-20 secconds. can i disable thi

  • Just took delivery of my 2.8GHz MacBook Pro - first impressions...

    Well, my very first impression was - WHO THE HECK OPENED MY BOX? It was shipped in its original packaging, which was put into a brown shipping box. As I was opening the brown box, it was very clear to me that someone opened it and re-taped it. The sa

  • Announcing the NI Idea Exchange!

    I am happy to announce a new feature available to our community members!  The NI Idea Exchange is a product feedback forum where NI R&D and users work together to submit ideas, collaborate on their development, and vote for the ones they like best. R