Trays within web template expanded automatically on server roundtrip

Hi Folks!
We have a problem with our web templates. Our templates were built with the Web Application Designer (WAD) and they contain trays which should be closed (collapsed) by default.
Our Problem:
Since the system was patched to SAPKW70018 the trays within the web application are rendered in expanded state automatically whenever an action is called that requires a server roundtrip.
For example: When one tray is being expanded (and it's update type is not set to passive) all other trays are expanded as well. Closing a tray leaves the other ones open. Closing another tray reopens the tray that has been closed before. Performing some action within the analysis item opens the trays as well, since most of them require roundtrips.
This behaviour only occurs under the Internet Explorer. Firefox and WebKit Browsers seem to perform well.
In hope for help and thanks in advance !
- Tim Brückner

Hello,
You can add a HTML button and use JavaScript on the click event.
[ABWR-Tool Users Guide syskoplan Automated BW Reporting (ABWR) Tool |http://www.competence-site.de/discussion.nsf/D772EC1F31613AE6C1256D0A00304246/$File/ABWR-Tool%20Users%20Guide_V04.doc]
[Six Steps to Creating Great-Looking PDF Reports in BW|http://www.bw-biexpertonline.com/archive/Volume_02_(2004)/Issue_05_(May)/V2I5A1.cfm?session=]
Thanks
Chandran

Similar Messages

BI Web Template Caching on EP server

Hello,
We are developing BI web templates in the BI Web Application Designer and then previewing (via publishing) them with the EP web server. When we make a change to the report/template and republish/preview it to the EP server, the old version remains in the EP web server cache.
Also to note, this is PRIOR to creating BI iviews and incorporating them in EP, so our assumption is that the cache settings in EP iviews do not apply in this case, but that it a broader issue with the EP web server or application itself.
So far, we have tried clearing the overall PCD EP cache under sys admin support section and that does not work. The only way to get the latest content to show up via preview/republish is to restart the EP instance which clears the cache.
Is there any other place cache can be cleared or a setting that will allow the BI previewer and ALL content (i.e. iviews as well) to ALWAYS get the latest and greatest version??
Thanks in advance for any help.
Dave K.

hi Dave,
cpl of questions are you on a federated network or are you using any proxy to access the portal? usually it will be slightly delayed some times based on the proxy cache. how are you adding the reports to role through delta link or copy?
When using the portal cache, data updates can appear with a delay.
pls go through the following link it may help you.
http://help.sap.com/saphelp_nw70/helpdata/EN/25/8c174082fe1961e10000000a155106/content.htm
Jo

How to get New Window without Variable Entry screen from one Web Template?

Hi Experts,
I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
I need to avoid this "Rerun" feature in New Window.
Kindly suggest me how to achieve this..
Full points will be given.
Thanks
Jay Jay

Hi Thanks.
Even I'm also trying for the same scenario only.
Actually I have 2 Web Templates.
In First Template I have 2 Charts and 2 Zoom buttons for each.
While I running the 1 Template, i give an Value in the Variable screen of First Web Template.
If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
(Since, U have an Mandatory field in Second Template u were not faced this requirment.)
Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
Kindly help me in this issue.
Thanks in advance.

How to achieve New Window requirement from One Web Template?

Hi Experts,
I've a WebTemplate contains 2 Graphs. Each graph have one Zoom Button. My requirement is, When I click the Zoom button that corresponding Grpah should display in a New Window. I've finished all the above requirements.
Since, I have One Mandatory field, I'm always getting the Variable Screen in a New Window while I clik the Zoom Button.
I need to avoid this "Rerun" feature in New Window.
Kindly suggest me how to achieve this..
Full points will be given.
Thanks
Jay Jay

Hi Thanks.
Even I'm also trying for the same scenario only.
Actually I have 2 Web Templates.
In First Template I have 2 Charts and 2 Zoom buttons for each.
While I running the 1 Template, i give an Value in the Variable screen of First Web Template.
If I click a Zoom button of 1st Chart, It should open a New window with the Second Web Template. And Second Web Template should automatically take a First Template's Variable screen Values.
(Since, U have an Mandatory field in Second Template u were not faced this requirment.)
Even I tried with "TRANSFER_STATE". It is not taking the First Variable Screen's input values.
Kindly help me in this issue.
Thanks in advance.

How to...refresh specific elements (graphs) within a web-template

Dear experts,
I am at the moment developing a warehouse monitoring tool which will display "live" warehouse performance information directly in the warehouse to the operators on a big screen.
We are using different graphs (speedometer, etc...) on one web-template and we want to refresh them automatically in regular intervals (every 1 min). But we do not want to refresh the whole website - but only the specific BW elements within the website.
Is there any way we can do this?
Thanks a lot for your support.
Cheers
Joe

The only way to do a refresh for only an specific part of a Web Application, is using IFRAMES.
http://www.w3schools.com/TAGS/tag_iframe.asp
You must create another template that only would have the chart that you want to refresh automaticly.
The function for do the automatic refresh is this.
function refresh() {
location.reload(true)
/* Set the number below to the amount of delay, in milliseconds,
you want between page reloads: 1 minute = 60000 milliseconds. */
window.setInterval("refresh()",300000);
// End -->
Greetings.

500 Internal server error in web template for specific users

Hi We have issue with Web templates for some of the users giving error "500 internal Server Error", all other users able to run the same report.
We have authorization for the user and following variable which will give target currency selection in variable screen.
SAP BI Environment
BI Java : Release: 7 - Patch level: 0000000107 - Description: BI Web Applications Java - Additional info: - Production mode: true BI JAVA SPS : 7, Patch : 0
BI ABAP : Release: 701 - Patch level: 0007 - Description: SAP Business Warehouse (PBICLNT005) - Additional info: - Production mode: true
Java Virtual Machine : Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_28-b03
Operating System : Windows 2003 - amd64 - 5.2
Error Message :
ERROR: Specify a value for variable Select Target Currency
ERROR: Specify a value for variable Select Target Currency
Root Cause :
The initial exception that caused the request to fail was:
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:932)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:109)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1462)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:516)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:198)
please let me know if any of you guys had this kind of problem.

SLD is not down its in active , I checked SLD url and Technical system also
Its in active , but when the problem is happend they done restart
but many times its happening every time restart is not preferrable ,upto that one is production system.
SLD is in active , but why the JCO'S ARE DISABLE under content Admin
where we can search the SLD user , we checked in SU01 but the user didn't exist there
If user is lock in the sense after the restart again it's working fine
I want to know the Root cause , why bcz it's simultaniously happend.
Regards,
SONY

Opening a URL from a button within a Web Template

Hi All,
I have a requirement to provide report specific help from within a standard web template. Assuming that I had a list of help URLs for each report and an intermediary way to redirect to those URL based upon a unique id such as the reports technical name, is it possible to create a generic button from within a web template that would dynamically create a URL based on the reports technical name? I.e., http://www.example.com/page.html?ZGTRPTNME
To date I have only used the Action "Command via Command Wizard" from within the parameters of the button Web Item. However, I did notice that a Script Function was provided. Has any used this functionality and is it possible to create a URL with the technical name of the report?

Rekesh,
I had a look at the document you linked however what I need to find out is how I can place the technical name (dynamically) within the web template URL (i.e., this needs to work for multiple projects over many reports that all use the same global web template).
It's actually very easy opening a new window via javascript however finding the varible for the report technical name remains unclear. At present I am looking at command URL's. The only other option is that I use a java script substring command to pull the report technical name from the URL (although this not as clean as using command URL's).
EDIT: Found this document: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/ef9a6c13f2025be10000000a1553f7/content.htm
Appears that the command: sapbi_page.GetMainTemplateName(); will give me the technical name of the webtemplate although I'm finding it hard to find the command for getting the technical name of the current report.
Edited by: Paul Thomson on Feb 18, 2010 4:00 PM

Passing a variable value from one query to another within a web template

Hi All,
I have a web template with two queries. Both queries have the same select option variable called ZSELCUST on the characteristic ZCUSTOMER but because they are different info providors (both infocubes) the customer has to be entered once for each query, even with the 'Display same variable only once' flag checked.
I want the user to select the customer once and then that value be passed to the other query within the resulting web template output.
Am I right in that the same variable is used more than oncee because of the different info providors?
I'm struggling, can anyone help out there....???
Best Regards,
Stuart Humphrey

Hi
A way of doing this is by "linking" the queries: in transaction RSBBS you define the sender and receiver queries. In query navigation you can jump to the dependent query (blue arrow icon in the BEx tool bar). This transfers the navigational state to the called query: filters over characteristics and variable values.
Hope this help
German

Stop the automatic refresh in web templates

Hi,
Is there an option to stop the automatic refresh of a webtemplate each time a user is doing is doing an action (filtering a value, drill down...).
Thanks,
Gabriel

Hi Chandu,
Thanks for your answer, But I didn't succeed to find this option. I check on the web template, the table, the filter pane, the navigation pane...
Any suggestion?
Thanks,
Gabriel

Condition Reporting within a Web Template

We need create a condition that list the top 10 customer by volume and total for all other and a grand total. I created a condition for top 10 and it displayed the top 10 fine and a grand total. I can not seem to get a total for all other customers.
Any suggestions? Thanks, Steve

Hi
the conditions work globally on a report.. soo its quite normal that u see only top 10 customers in ur web templates as all other records are filtered out in the query and the over all total. It is not possible to see the over all total directly... might be u need to use some calculated key figure to know that value. or use some other query into ur web templates which filters out the customers in top 10 positions.
regards
mohan

Regarding upgrade of web report\web templates functionalites BW 3.5-BI 7.0

hi all,
         I m working on a Upgrade study from BW 3.5 to BI 7.0 for Web Templates,web items and java scripts.
Below is the scenario of the client system:
New web templates are created from the 6 master web templates available for publishing to a custom Portal (created using BSP and hosted on the WAS). TOOLBAR and FOOTER are custom web templates used in all Master Templates and contain various JavaScript functions and footer code respectively.
TOOLBAR provides the Toolbar, header and buttons functionalities in the Master Templates via the contained Javascript functions. FOOTER displays the date and time of issue as well the logged in user.
FOOTER1 and FOOTER2 are web items derived from FOOTER web template. They have different set of web item properties and are used to create web templates used through the custom Portal.
It is observed from BW Tables that out of 100 unique Web Templates available in the system, 90 are using TOOLBAR template and 95 are using FOOTER template.
No external Javascript .js files are used in the Web templates. Most of the Javascript functionality is contained in TOOLBAR and no other custom javascript in master templates. However, there are some derived web templates where custom javascript is contained.
Following is the process to create custom Web Templates in development server that are eventually transported to QA and Production:
1)     The appropriate master template is identified and saved with new name in developer role.
2)     Dataprovider is added to corresponding web items.
3)     From the library, properties are transferred from master template to the custom template.
4)     Report title is added in HTML tab.
5)     No changes are needed in the Web Templates Properties except change of value in Show Jump Target in field to the portal Frame ConPortal or _self in case RRI is to be used.
6)     Some properties like Title, Width in Pixel, Affected Data Provider, etc. needs to be adjusted. Changes can be done to web items seen in Overview tab except the FOOTER and TOOLBAR web items. These web items are saved as reusable components in Library.
7)     After all the changes the web template created is transported from development server.
To summarize, all master data for creation of web templates like reusable master templates, web items in library, web templates containing Javascript code are stored in dev. server. Custom web templates created from these are transported.
I want to validate the sequence of migration as below:
Following sequence has to be followed for the Web Templates and Queries Migration in development BI 7.0 Server:
1)     Migrate the Individual BEx Queries first and perform functional testing.
2)     Migrate the TOOLBAR template manually (create as new in BI 7.0 Toolset) and FOOTER template automatically (using Migration Tool).
3)     Manually migrate the JavaScript code in TOOLBAR. Please refer to section ..for more details.
4)     Migrate the library of reusable web items, if any.
      (What to do if web item is custom or is not supported in BI 7.0)
5)     Migrate the Master Web Templates manually (create as new in BI 7.0 Toolset) and automatically (wherever possible) and perform functional testing.
6)     Migrate the custom web templates automatically (wherever possible) and manually, if automatic migration is not possible. Perform functional testing and data provider binding.
7)     Perform jump target binding wherever applicable.
8)     Transport custom templates, TOOLBAR and FOOTER to QA and Production subsequently.
Also i have the following questions:
1. How to migrate functionalities accessed thru web templates like jump queries, general navigation blocks with filter, table interface, and are data providers automatically linked to web items or have to be done manually post migration.
2. Do we need to migrate the library of reusable web items also.
3. After migrating the master web templates and javascript containing templates to BI 7.0, can we migrate automatically the custom webtemplates derived from master templates and containing the custom javascript that is now avaialbe in BI 7.0, will they pick up the custom code automatically.
thanks in advance
Regards
praveen

No resolution found

"Web template as web item" icon missing

Hi all,
We are current on BW 3.5. I am now in the process of using the above functionality. I notice that the icon is missing from the "standard library" I can manually insert the code via the HTML table.
My question is how do I get the icon to appear in the standard library as I have a few of the web templates. I expected that this icon would appear automatically as part of the upgrade.

Hi,
I also have same problem with my BW 3.5 system.
its not showing the icon ( Object Expanded/Collapsed ) infront of the Navigation/Table/Conditions/Filter values..etc..
And i selected the " Expert Mode " in WAD settings.
Can anyone help me in this! ?
Regards,
-Vasanth.

Web template not working

Hi,
when I try to open a Webtemplate via
the Internet Explorer it is not working.
Please assist.
Regards,
Anita

You can determine the properties of the Web template both in an object tag (see Object Tag for the Properties of Web Templates) and or with command Call Web Template.
CMD
LDOC
Parameter
Description
TEMPLATE_ID
Name of the Web template
Name under which you stored the Web template in the Web Application Designer.
STATELESS (optional)
X = Yes, = No
End the connection to the server as soon as possible
For Web templates that are used almost exclusively for display without further navigation, it is more useful to set the attribute STATELESS. The session on the application server is terminated when the Web template is created. This saves resources on the application server.
If this attribute is not specified, it is assumed that the page is still needed for navigating.
USE_PERSONALIZATION (optional)
X = Yes, = No
Use personalized Web template
If the parameter is set to X, the personalized Web template for the current user is used. If personalization does not exist for the Web template or the parameter is not set, the Web template is executed without personalization.
STYLE_SHEET (optional)
Path for a stylesheet that you want to use to display the Web template.
This overwrites any stylesheet that you may have already assigned.
TRACE (optional)
X = switch on, = do not switch on
Switch on OLAP trace
To analyze problems with SAP, you usually need a trace. You can activate the trace with the help of note 112458 or by using the TRACE parameter.
JAVASCRIPT (optional)
X = switch on, = do not switch on
Use of JavaScript
Using this parameter, you ensure that Web applications are created using JavaScript (extensive interaction options) or suppress the use of JavaScript (restricted interaction).
If this parameter is not transferred, JavaScript is activated automatically in Web browsers of version >=4.0.
SNIPPET_OPERATIONS (optional)
X = switch on, = do not switch on
Reload changed components of the page
You use this parameter to control whether only changed objects are loaded in navigation. This function has higher Web browser requirements. For this reason, this function is only supported by MS Internet Explorer version >=.
If this parameter is not transferred, loading is activated automatically for the suitable Web browsers.
ENABLE_OPEN_WINDOW (optional)
X = switch on, = do not switch on
Open new window
Using this parameter, you can control whether a new browser window is opened, for example, for the properties dialog box or for filtering. If this parameter is not specified, new windows are opened (if supported by the Web browser).
VARIABLE_SCREEN (optional)
X = display variable screen, = do not display, if possible
Display variable screen
If you call up a Web template that has query views containing variables that are ready for input, you can use these parameters to display the variable screen. Is you do not set this parameter, or set it to , the variable screen is hidden, whenever possible. However, it will still be shown if, for example, the required variables that are ready for input have not yet been filled.
MELT_VARIABLES (optional)
X = merge, = display each query individually
Merge variables
If you call up a Web template containing several query views that have variables that are ready for input and you go to the variable screen display, you can determine, through these parameters, whether variables, which are used in all query views and in the same context (same InfoProvider, same compounding), are to be provided for input only once.
VARIABLES_CLEAR (optional)
X = reset variable, = do not reset
Reset default variables
If you call up a Web template that contains one or several query views that have variables that are ready for input, you can specify this parameter to reset the default variables through the query view. The variables then contain the defaults from the variable definition.
SUPPRESS_WARNINGS (optional)
X = do not display warnings, = display warnings
Suppress warnings
With this parameter, warnings are not displayed. With this parameter, warnings are not displayed.
SUPPRESS_SYSTEM_MESSAGES (optional)
'X' = Do not display system messages
' ' = Display system messages
Suppress system messages
With this parameter, system messages are not displayed.
DATA_MODE (optional)
NEW = use current data
STORED = Use precalculated data
HYBRID = use precalculated data, request current data if this is missing.
STATIC = use precalculated HTML pages
STATIC_HYBRID = use precalculated HTML pages, if there are none, search by precalculated data and when there is none, request current data
Data mode
This parameter is optional. If you do not specify one of the options for this parameter, a request is always sent to the OLAP processor and current data is read.
For the modi STORED and HYBRID, data has to be precalculated using the Reporting Agent.
See Defining the Web Templates Setting
The parameters PAGEID and WBID that are used in BW 2.x are supported for the Web templates created under BW 2.x. We recommend, however, that you no longer use these.
Calling up the Web template without navigating
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&STATELESS=X
Calling up the Web template with trace switched on
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&TRACE=X
Calling up the Web template with reset variables and active variable screen
http://yourAppServer:yourPort/SAP/BW/BEx?CMD=LDOC&TEMPLATE_ID=yourTemplate&VARIABLE_SCREEN=X&VARIABLES_CLEAR=X
Thank
Bhima

Error on page from BW 3.5's default web template

Hi Guru's,
We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we arent sure why.
On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5s default template. The prompt web page is fine. No errors on page messages.
However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
SAPBWSetFocus(anchor);
Error: Object expected
Code: 0
Its in the set_tab() function.
<script type="text/javascript">

</script>
Because the error goes away as soon as we navigate Im thinking some object isnt being created or initialized, but since the view source code of these pages are identical Im wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
Any help will be much appreciated.
Thanks,
Jeri

Heike,
Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
Please, do you have any other suggestions?
Thanks,
Jeri

Getting error with Web Templates in BI 7.0

Hi Everyone,
We have upgraded BW3.5 to BW7.0. When we are executing any Web Template in browser we are getting this error-
RSBOLAP 018 Java system error:call FM RSWR_TEMPLATE_PROCESS_PROXY to ProgId CHWSXID01.....
For your information we have installed EP Usage and BI on the portal but Portal is not configured to the BI. Is it necessary to configure Portal to the BI?
After this when we are login to the portal we are getting this error-
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot find BI master system
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
Details: Full Exception Chain
System Environment
Server
BI Java     Release: 7 - Patch level: 0000000013 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP     unknown
Java Virtual Machine     Java HotSpot(TM) 64-Bit Server VM - Hewlett-Packard Company - 1.4.2 1.4.2.14-070618-19:48-PA_RISC2.0W PA2.0W (aCC_AP)
Operating System     HP-UX - PA_RISC2.0W - B.11.11
Deployed SCAs
SCA     Version     SP     Patch     Compiled     Deployed
ADSSAP     7.00     13     0     2007-08-12 01:18:54 CEST     2007-11-17 02:43:53 CET
BASETABLES     7.00     13     0     2007-08-12 01:36:38 CEST     2007-11-17 01:22:45 CET
BI-BASE-S     7.00     13     0     2007-08-12 12:03:10 CEST     2007-12-08 09:58:16 CET
BI-IBC     7.00     13     0     2007-08-12 12:03:28 CEST     2007-12-08 09:58:26 CET
BI-REPPLAN     7.00     13     0     2007-08-09 07:49:39 CEST     2007-12-08 10:01:05 CET
BI-WDALV     7.00     13     0     2007-08-09 07:49:47 CEST     2007-12-08 09:58:55 CET
BIWEBAPP     7.00     13     0     2007-08-12 12:05:56 CEST     2007-12-08 09:43:55 CET
BI_MMR     7.00     13     0     2007-08-12 01:37:49 CEST     2007-11-17 02:44:46 CET
BI_UDI     7.00     13     0     2007-08-11 19:04:00 CEST     2007-11-17 02:46:49 CET
CAF     7.00     13     0     2007-08-09 09:23:15 CEST     2007-11-17 02:53:13 CET
CAF-KM     7.00     13     0     2007-08-09 07:54:22 CEST     2007-12-08 10:21:28 CET
CAF-UM     7.00     13     0     2007-08-09 09:23:24 CEST     2007-11-17 02:54:18 CET
CORE-TOOLS     7.00     13     0     2007-08-12 01:41:21 CEST     2007-11-17 01:19:15 CET
EP-PSERV     7.00     13     0     2007-09-06 14:03:50 CEST     2007-12-08 10:02:22 CET
EP-WDC     7.00     13     0     2007-08-12 12:41:08 CEST     2007-12-08 10:03:50 CET
EPBC     7.00     13     0     2007-08-12 12:37:44 CEST     2007-12-08 08:07:23 CET
EPBC2     7.00     13     0     2007-08-12 12:38:06 CEST     2007-12-08 10:03:56 CET
JLOGVIEW     7.00     13     0     2007-08-12 00:16:00 CEST     2007-11-17 01:19:52 CET
JSPM     7.00     13     0     2007-08-12 00:17:00 CEST     2007-12-06 16:41:39 CET
KM-KW_JIKS     7.00     13     0     2007-08-12 01:45:19 CEST     2007-11-17 02:54:37 CET
KMC-BC     7.00     13     0     2007-08-12 12:41:47 CEST     2007-12-08 10:05:28 CET
KMC-CM     7.00     13     0     2007-08-12 12:43:04 CEST     2007-12-08 10:06:52 CET
KMC-COLL     7.00     13     0     2007-08-12 12:43:35 CEST     2007-12-08 10:07:49 CET
LM-PORTAL     7.00     13     0     2007-08-09 07:58:38 CEST     2007-12-08 10:07:59 CET
LM-SERVICE     6.40     10     0     2004-12-23 01:42:43 CET     2007-11-17 01:18:14 CET
LM-TOOLS     7.00     13     0     2007-09-06 10:46:34 CEST     2007-11-17 03:05:32 CET
NET-PDK     7.00     13     0     2007-08-12 12:45:34 CEST     2007-12-08 09:51:51 CET
RTC     7.00     13     0     2007-08-12 12:48:07 CEST     2007-12-08 09:51:56 CET
RTC-STREAM     7.00     13     0     2007-08-12 12:48:07 CEST     2007-12-08 10:08:05 CET
SAP-EU     7.00     13     0     2007-08-09 08:01:01 CEST     2007-12-08 10:19:31 CET
SAP-JEE     7.00     13     0     2007-08-12 01:53:11 CEST     2007-11-17 01:24:19 CET
SAP-JEECOR     7.00     13     0     2007-09-07 08:23:34 CEST     2007-11-17 01:27:06 CET
SAP_JTECHF     7.00     13     0     2007-08-12 01:56:44 CEST     2007-11-17 01:28:18 CET
SAP_JTECHS     7.00     13     0     2007-08-12 01:59:51 CEST     2007-11-17 02:32:48 CET
UMEADMIN     7.00     13     0     2007-08-09 09:39:47 CEST     2007-11-17 03:06:23 CET
UWLJWF     7.00     13     0     2007-08-12 12:52:23 CEST     2007-12-08 10:08:51 CET
VCBASE     7.00     13     0     2007-08-12 12:52:34 CEST     2007-12-08 10:22:05 CET
VCFLEX     7.00     13     0     2007-08-12 12:53:39 CEST     2007-12-08 10:21:32 CET
VCFRAMEWORK     7.00     13     0     2007-08-12 12:53:51 CEST     2007-12-08 10:21:42 CET
VCKITBI     7.00     13     0     2007-08-12 12:23:20 CEST     2007-12-08 10:22:10 CET
VCKITGP     7.00     13     0     2007-08-12 12:53:51 CEST     2007-12-08 10:22:15 CET
VCKITXX     7.00     13     0     2007-08-12 12:53:51 CEST     2007-12-08 10:22:19 CET
WDEXTENSIONS     7.00     13     0     2007-08-09 08:05:30 CEST     2007-12-08 10:24:17 CET
Full Exception Chain
Log ID     00306EF4B9BB0076000000120000327700044245C894263C
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
     at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
     at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
     at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
     at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
     at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
     at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:259)
     at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:172)
     at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:65)
     at com.sap.ip.bi.webapplications.runtime.impl.Page.constructPage(Page.java:942)
     at com.sap.ip.bi.webapplications.runtime.impl.Page.<init>(Page.java:761)
     at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.createPage(Controller.java:511)
     at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:972)
     at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864)
     at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:488)
     at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:22)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
     at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
     at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
     at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Helpful answers will be rewarded....
Thanks and Regards,
Pankaj

Single Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers.

Trays within web template expanded automatically on server roundtrip

Similar Messages

Maybe you are looking for