TREX preprocessor/filter errors
hello,
after trex installation on linux and running the runInstallationTest.py the script finishes with the following console output:
<snipped>
[16384, 5.498] TREX_QDOC_STATE_PREPROCESS :0
[16384, 5.498] TREX_QDOC_STATE_PREPROCESS_FAILED :4
[16384, 5.498] detected Documentsd in PREPROCESS_FAILED -> Test Broken
[16384, 5.499] << ending waitQSqueriedState, rc = 3 (RC_SUBTEST_FAILED) (2 of 2 subtests passed), after 4.003 secs
[16384, 5.499] << ending runInstallationTest, rc = 3 (RC_SUBTEST_FAILED) (7 of 8 subtests passed), after 5.498 secs
The TREXPreprocessor-Trace contains the following error messages:
<snipped>
[32771] 2005-09-29 11:48:12.211 e TrexFilterCl TrexFilterCl.cpp(00335) : ERROR: read returncode failed
[32771] 2005-09-29 11:48:12.213 e TrexFilterCl TrexFilterCl.cpp(00312) : ERROR: write document failed
[32771] 2005-09-29 11:48:12.224 e TrexFilterCl TrexFilterCl.cpp(00335) : ERROR: read returncode failed
[32771] 2005-09-29 11:48:12.224 e TrexFilterCl TrexFilterCl.cpp(00382) : still failed request after maxtries
[32771] 2005-09-29 11:48:12.226 e TrexFilterCl TrexFilterCl.cpp(00312) : ERROR: write document failed
[32771] 2005-09-29 11:48:12.227 e TrexFilterCl TrexFilterCl.cpp(00382) : still failed request after maxtries
[32771] 2005-09-29 11:48:12.236 e TrexFilterCl TrexFilterCl.cpp(00430) : ERROR: write request type failed
[32771] 2005-09-29 11:48:12.239 e TrexFilterCl TrexFilterCl.cpp(00444) : ERROR: read returncode failed
[32771] 2005-09-29 11:48:12.249 e TrexFilterCl TrexFilterCl.cpp(00444) : ERROR: read returncode failed
[32771] 2005-09-29 11:48:12.250 e TrexFilterCl TrexFilterCl.cpp(00482) : still failed request after maxtries
[32771] 2005-09-29 11:48:12.250 e preprocessor Preprocessor.cpp(01458) : FILTER: TrexFilter 'internet/www.pythonware.com'
completed with errors: As filterRc is 128 content is cleared, HARD ERROR.
[32771] 2005-09-29 11:48:12.251 e preprocessor Preprocessor.cpp(03393) : HANDLE: DISPATCH - Processing Document with key '
internet/www.pythonware.com' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 14128)
[32771] 2005-09-29 11:48:12.252 e TrexFilterCl TrexFilterCl.cpp(00444) : ERROR: read returncode failed
[32771] 2005-09-29 11:48:12.252 e TrexFilterCl TrexFilterCl.cpp(00482) : still failed request after maxtries
[32771] 2005-09-29 11:48:12.253 e preprocessor Preprocessor.cpp(01458) : FILTER: TrexFilter 'internet/www.python.org' comp
leted with errors: As filterRc is 128 content is cleared, HARD ERROR.
[32771] 2005-09-29 11:48:12.253 e preprocessor Preprocessor.cpp(03393) : HANDLE: DISPATCH - Processing Document with key '
internet/www.python.org' failed, returning PREPROCESSOR_ACTIVITY_ERROR (Code 14128)
<snipped>
The trace continues with a lot of similar error messages.
All efforts to index a repository in the enterprise portal have failed due to similar errors (the TREXPreprocessor-Trace file shows similar error messages and the same error code 14128).
Does anybody know what might be the problem here?
Kind regards,
Christof.
Hi Christof,
14128 = Operating system generated error
And in that case there are only two comments I can make:
1) Have you gone through the documented post installation tasks?
2) If 1=true, then log a support message to SAP, please.
Regards,
Karsten
Similar Messages
-
VERY STRANGE Interactive Report Filter Error
I have a very interesting problem happening with an interactive report in my APEX application. The report runs just fine and has been in use for about 6 months. Just recently, the users have begun to run into problems when using the filter capability within the report. There is a specific column heading (RH Analyst) that they typically click on and select a specific analyst name (the list contains 10 entries). Most selections from the filter list work fine. However, when one specific name is chosen, they get the dreaded ORA-06502: PL/SQL: numeric or value error: character string buffer too small+* error.
I have been working to narrow the problem down and have found the following:
1. The filter error is related to the content of one specific column (not the one I am filtering on)
2. The column that is causing the error is a CLOB datatype
3. The data in the CLOB column was inserted into the database from a form utilizing an "HTML Editor Standard" type of item
4. The data in the CLOB column was copied and pasted from an email that was being viewed using Outlook 2007
5. If I try to recreate the problem with exactly the same information, but copied and pasted from Outlook 2003, I don't experience the problem.
6. The only people experiencing this problem are people who have upgraded their system from Microsoft Office 2003 to Microsoft Office 2007
7. When I try to load the form with the data that was stored in the database, I get a 404 page not found error. This is the same error that I get if more than 32k of data was saved into the CLOB.
The data pasted into the HTML editor from Outlook 2007 (_this is the data that causes problems_) and saved to the CLOB looks like this when I extract it in SQL Developer
(CLOB) <meta content="text/html; charset=utf-8" http-equiv="Content-Type" />
<meta content="Word.Document" name="ProgId" />
<meta content="Microsoft Word 12" name="Generator" />
<meta content="Microsoft Word 12" name="Originator" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_filelist.xml" rel="File-List" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_themedata.thmx" rel="themeData" />
<link href="file:///C:\DOCUME~1\euw6ay0\LOCALS~1\Temp\msohtmlclip1\01\clip_colorschememapping.xml" rel="colorSchemeMapping" /><!--[if gte mso 9]><xml>
<w:WordDocument>
<w:View>Normal</w:View>
<w:Zoom>0</w:Zoom>
<w:TrackMoves />
<w:TrackFormatting />
<w:PunctuationKerning />
<w:ValidateAgainstSchemas />
<w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid>
<w:IgnoreMixedContent>false</w:IgnoreMixedContent>
<w:AlwaysShowPlaceholderText>false</w:AlwaysShowPlaceholderText>
<w:DoNotPromoteQF />
<w:LidThemeOther>EN-US</w:LidThemeOther>
<w:LidThemeAsian>X-NONE</w:LidThemeAsian>
<w:LidThemeComplexScript>X-NONE</w:LidThemeComplexScript>
<w:Compatibility>
<w:BreakWrappedTables />
<w:SnapToGridInCell />
<w:WrapTextWithPunct />
<w:UseAsianBreakRules />
<w:DontGrowAutofit />
<w:SplitPgBreakAndParaMark />
<w:DontVertAlignCellWithSp />
<w:DontBreakConstrainedForcedTables />
<w:DontVertAlignInTxbx />
<w:Word11KerningPairs />
<w:CachedColBalance />
</w:Compatibility>
<w:BrowserLevel>MicrosoftInternetExplorer4</w:BrowserLevel>
<m:mathPr>
<m:mathFont m:val="Cambria Math" />
<m:brkBin m:val="before" />
<m:brkBinSub m:val="--" />
<m:smallFrac m:val="off" />
<m:dispDef />
<m:lMargin m:val="0" />
<m:rMargin m:val="0" />
<m:defJc m:val="centerGroup" />
<m:wrapIndent m:val="1440" />
<m:intLim m:val="subSup" />
<m:naryLim m:val="undOvr" />
</m:mathPr></w:WordDocument>
</xml><![endif]--><!--[if gte mso 9]><xml>
<w:LatentStyles DefLockedState="false" DefUnhideWhenUsed="true"
DefSemiHidden="true" DefQFormat="false" DefPriority="99"
LatentStyleCount="267">
<w:LsdException Locked="false" Priority="0" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Normal" />
<w:LsdException Locked="false" Priority="9" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="heading 1" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 2" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 3" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 4" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 5" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 6" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 7" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 8" />
<w:LsdException Locked="false" Priority="9" QFormat="true" Name="heading 9" />
<w:LsdException Locked="false" Priority="39" Name="toc 1" />
<w:LsdException Locked="false" Priority="39" Name="toc 2" />
<w:LsdException Locked="false" Priority="39" Name="toc 3" />
<w:LsdException Locked="false" Priority="39" Name="toc 4" />
<w:LsdException Locked="false" Priority="39" Name="toc 5" />
<w:LsdException Locked="false" Priority="39" Name="toc 6" />
<w:LsdException Locked="false" Priority="39" Name="toc 7" />
<w:LsdException Locked="false" Priority="39" Name="toc 8" />
<w:LsdException Locked="false" Priority="39" Name="toc 9" />
<w:LsdException Locked="false" Priority="35" QFormat="true" Name="caption" />
<w:LsdException Locked="false" Priority="10" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Title" />
<w:LsdException Locked="false" Priority="1" Name="Default Paragraph Font" />
<w:LsdException Locked="false" Priority="11" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Subtitle" />
<w:LsdException Locked="false" Priority="22" SemiHidden="false"
UnhideWhenUsed="false" QFormat="true" Name="Stro..."The data pasted into the HTML editor from Outlook 2003 and saved to the CLOB looks like this when I extract it in SQL Developer
(CLOB) <p style="margin-bottom: 6pt;" class="MsoNormal"><u><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">“Implementation and Compliance Update #2”</span></u><span style="font-size: 10pt; font-family: 'Arial','sans-serif';"> addresses a concern that clearinghouses may be in some cases inappropriately charging providers for the use of a standard transaction. </span><o:p></o:p></p>
<ul type="disc">
<li style="" class="MsoNormal"><span style="font-size: 7pt;"> </span><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">In particular, we cite MN Statutes 62J.536, Subd. 1f, which states that: <em>Group purchasers may not impose any fee on providers for the use of the transactions prescribed in this subdivision. </em>The update explains that “payers (or their agents) may not charge for receiving a standard transaction” and provides additional information. The update is accompanied by a joint cover memo from MDH, the Minnesota Department of Commerce, and the Minnesota Department of Labor and Industry. Note: The Minnesota Department of Health (MDH) is charged with implementing and enforcing Minnesota Statutes, section 62J.536. In addition, the Minnesota Department of Commerce and the Department of Labor and Industry administer additional statutory requirements for electronic claims submission, consistent with MS § 62J.536.</span><span style="font-size: 9pt; font-family: 'Arial','sans-serif';"> <o:p></o:p></span></li>
</ul>
<p style="margin-bottom: 6pt;" class="MsoNormal"><u><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">“Implementation and Compliance Update #3”</span></u><span style="font-size: 10pt; font-family: 'Arial','sans-serif';"> provides a reminder of the upcoming Dec. 15, 2009 effective date for rules for the standard, electronic exchange of health care remittance advices. It also clarifies that:</span> <o:p></o:p></p>
<ul type="disc">
<li style="" class="MsoNormal"><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">Statutory requirements for standard, electronic remittance advices do not include requirements for electronic payment (electronic funds transfer – EFT)</span><span style="font-size: 9pt; font-family: 'Arial','sans-serif';"> <o:p></o:p></span></li>
</ul>
<ul type="disc">
<li style="" class="MsoNormal"><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">Consistent with MDH’s enforcement policies and plans described in Update #1 (posted 6/5/09):</span><span style="font-size: 9pt; font-family: 'Arial','sans-serif';"> <o:p></o:p></span></li>
</ul>
<p style="margin-bottom: 6pt; margin-left: 1.1in; text-indent: -0.25in;" class="MsoNormal"><span style="font-size: 10pt; font-family: 'Courier New';">o</span><span style="font-size: 7pt;"> </span><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">Starting Dec. 15, 2009, group purchasers (payers) must be able to transmit – and providers must be able to accept - standard, electronic RAs via computer-computer electronic data interchange (EDI). So long as payers and providers are able to exchange the remittance advice standard transaction electronically, the Department does not take issue with payers making available additional mechanisms for communicating RAs to providers, such as access to portable document format (.pdf) files, or provider electronic mailboxes.</span><span style="font-family: 'Arial','sans-serif';"> </span><o:p></o:p></p>
<ul type="disc">
<li style="" class="MsoNormal"><span style="font-size: 10pt; font-family: 'Arial','sans-serif';">The Department’s determinations of whether payers and providers are complying with the regulations will take into account several factors. However, we have determined that it is not realistic to require electronic remittance advices when claims ar..." I am using APEX version 3.2
Any help would be greatly appreciated. For now, my short term solution for them is to copy the information from Outlook 2007, paste it into a Wordpad, then copy it from wordpad and paste it into the HTML editor control. That seems to work fine but it is not a very nice solution for the users!
Thanks,
DaleRoel,
Hey there! Hope you enjoyed your time off ;) Thanks for having a look...
Yes, of course I "could" update the functions, but this is NOT something I want to do. I'm one of those people that subscribes to Coding by Contract and the assertion routines at the beginning and end of my subprograms are an important part of that.
This may be a lack of understanding on my part with regards to the order in which Oracle does it's thing - or a bug in Apex... I'm able to duplicate the problem on apex.oracle.com: dmcghan/test/test.
Log into the demo app with admin/dmcghan. The home page has an interactive report, filter the name and you should get the error. When you look at the query you'll see a filter in the where clause that goes against the apex_collections table. This is populated from the post-authentication procedure. Let me know if you have questions.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur -
Epson printer and driver, all jobs "stopped due to filter errors"
My printer broke, so I'm trying to use my roommate's Epson WorkForce 520 with my Arch64 system. I grabbed the 64-bit driver rpm from Epson, extracted and copied everything to /opt (no readme for a manual installation, but the paths in the PPD point to having the files installed there). The driver came with some libraries, so I added their path to ld.so.conf and ran ldconfig. Successfully added the printer in CUPS, but trying to print anything gives me "/opt/..../epson_inkjet_printer_filter failed". I checked the permissions on the filter, they're 755 and it's executable. The CUPS error log shows "Job stopped due to filter errors; please consult the error_log file for details" followed by debug spew which doesn't clarify the issue for me, attached below.
I searched on the problem, found some people blaming it on issues with the update to CUPS 1.4 which have since been addressed, and others who were told to switch to using opensource drivers. Unfortunately that doesn't seem to be an option for me; Gutenprint and foomatic have drivers for the 500 but they don't support the 520; the only driver I can find that does is the one from Epson.
Anyway, I'm really hoping this is an issue with my CUPS/printer config, or that I missed some critical step in manually installing the printer drivers, and not that Epson's driver is just broken. If anyone has any ideas I'd be much obliged, let me know if you need more information.
Here's the complete error log from when I try to print. Sorry if it's obnoxiously long, I'm not sure which parts are relevant:
E [06/Oct/2010:11:45:04 -0400] [Job 17] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Oct/2010:11:45:04 -0400] [Job 17] The following messages were recorded from 11:45:04 to 11:45:04
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Constructing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Putting.
D [06/Oct/2010:11:45:04 -0400] [Job 17] [612.0 792.0]
D [06/Oct/2010:11:45:04 -0400] [Job 17] /.MediaSize
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /%MediaDestination
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /%MediaSource
D [06/Oct/2010:11:45:04 -0400] [Job 17] 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsBitsPerColor
D [06/Oct/2010:11:45:04 -0400] [Job 17] 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsColorOrder
D [06/Oct/2010:11:45:04 -0400] [Job 17] 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsColorSpace
D [06/Oct/2010:11:45:04 -0400] [Job 17] 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] /cupsCompression
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] true
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsBitsPerColor to 8...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsColorOrder to 0...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsColorSpace to 1...
D [06/Oct/2010:11:45:04 -0400] [Job 17] Setting cupsCompression to 1...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] Updating PageSize to [612 792]...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.Duplex = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.Tumble = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->page = 1
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsPPD = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsPPD->flip_duplex = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] (4) Flip: X=0 Y=0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups->header.cupsPageSizeName =
D [06/Oct/2010:11:45:04 -0400] [Job 17] size = Letter
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins[] = [ 0.116667 0.116667 0.116667 0.116667 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Reallocating memory, [612 792] = 2976x3876 pixels, color space: 1, bits per color: 8...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_space_params(0x1348128, 0x7fff0ad37d10)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cache_size = 8388608
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37ad0)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37a90)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.117 0.117 0.117 0.117 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Result of putting.
D [06/Oct/2010:11:45:04 -0400] [Job 17] false
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] Installing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] false
D [06/Oct/2010:11:45:04 -0400] [Job 17] -device-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38050)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38000)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38090)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38080)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad37f40)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_matrix(0x1348128, 0x7fff0ad38030)
D [06/Oct/2010:11:45:04 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Finishing.
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -dict-
D [06/Oct/2010:11:45:04 -0400] [Job 17] -mark-
D [06/Oct/2010:11:45:04 -0400] [Job 17] **** DSC comment: /Page
D [06/Oct/2010:11:45:04 -0400] [Job 17] << /DSC_struct -dsc_data_struct- /PageNum 1 >>
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] **** DSC comment: /PageBoundingBox
D [06/Oct/2010:11:45:04 -0400] [Job 17] << /DSC_struct -dsc_data_struct- >>
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_put_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_set_color_info(0x1348128)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:45:04 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:45:04 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:45:04 -0400] [Job 17] ppd = 0x1515170
D [06/Oct/2010:11:45:04 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:45:04 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:45:04 -0400] [Job 17] Wrote 1 pages...
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_get_params(0x1348128, 0x7fff0ad38010)
D [06/Oct/2010:11:45:04 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:45:04 -0400] [Job 17] cups_print_pages(0x1348128, 0x7fd9faf08780, 1)
D [06/Oct/2010:11:45:04 -0400] [Job 17] cupsBitsPerPixel = 24, cupsWidth = 2976, cupsBytesPerLine = 8928, srcbytes = 8928
D [06/Oct/2010:11:45:04 -0400] [Job 17] End of messages
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state=3(idle)
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state-message="Processing page 1..."
D [06/Oct/2010:11:45:04 -0400] [Job 17] printer-state-reasons=none
E [06/Oct/2010:11:48:16 -0400] [Job 17] Job stopped due to filter errors; please consult the error_log file for details.
D [06/Oct/2010:11:48:16 -0400] [Job 17] The following messages were recorded from 11:48:16 to 11:48:16
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Constructing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Putting.
D [06/Oct/2010:11:48:16 -0400] [Job 17] [612.0 792.0]
D [06/Oct/2010:11:48:16 -0400] [Job 17] /.MediaSize
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /%MediaDestination
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /%MediaSource
D [06/Oct/2010:11:48:16 -0400] [Job 17] 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsBitsPerColor
D [06/Oct/2010:11:48:16 -0400] [Job 17] 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsColorOrder
D [06/Oct/2010:11:48:16 -0400] [Job 17] 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsColorSpace
D [06/Oct/2010:11:48:16 -0400] [Job 17] 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] /cupsCompression
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] true
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsBitsPerColor to 8...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsColorOrder to 0...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsColorSpace to 1...
D [06/Oct/2010:11:48:16 -0400] [Job 17] Setting cupsCompression to 1...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] Updating PageSize to [612 792]...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.Duplex = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.Tumble = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->page = 1
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsPPD = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsPPD->flip_duplex = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] (4) Flip: X=0 Y=0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups->header.cupsPageSizeName =
D [06/Oct/2010:11:48:16 -0400] [Job 17] size = Letter
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins[] = [ 0.116667 0.116667 0.116667 0.116667 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Reallocating memory, [612 792] = 2976x3876 pixels, color space: 1, bits per color: 8...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_space_params(0x2623128, 0x7fff41eea420)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cache_size = 8388608
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea1e0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea1a0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.117 0.117 0.117 0.117 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Result of putting.
D [06/Oct/2010:11:48:16 -0400] [Job 17] false
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] Installing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] false
D [06/Oct/2010:11:48:16 -0400] [Job 17] -device-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea760)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea710)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea7a0)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea790)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea650)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_matrix(0x2623128, 0x7fff41eea740)
D [06/Oct/2010:11:48:16 -0400] [Job 17] Portrait matrix: XX=+1 XY=0 YX=0 YY=-1
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612 792 ], HWResolution = [ 360 360 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] matrix = [ 5.000 0.000 0.000 -5.000 -42.000 3918.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Finishing.
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -dict-
D [06/Oct/2010:11:48:16 -0400] [Job 17] -mark-
D [06/Oct/2010:11:48:16 -0400] [Job 17] **** DSC comment: /Page
D [06/Oct/2010:11:48:16 -0400] [Job 17] << /DSC_struct -dsc_data_struct- /PageNum 1 >>
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] **** DSC comment: /PageBoundingBox
D [06/Oct/2010:11:48:16 -0400] [Job 17] << /DSC_struct -dsc_data_struct- >>
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_put_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_set_color_info(0x2623128)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[0] = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsEncodeLUT[65535] = 255
D [06/Oct/2010:11:48:16 -0400] [Job 17] num_components = 3, depth = 24
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsColorSpace = 1, cupsColorOrder = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsBitsPerColor = 8
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_gray = 0, dither_grays = 0
D [06/Oct/2010:11:48:16 -0400] [Job 17] max_color = 255, dither_colors = 256
D [06/Oct/2010:11:48:16 -0400] [Job 17] ppd = 0x27f0170
D [06/Oct/2010:11:48:16 -0400] [Job 17] PageSize = [ 612.000 792.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] margins = [ 0.000 0.000 0.000 0.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWResolution = [ 360.000 360.000 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] width = 2976, height = 3876
D [06/Oct/2010:11:48:16 -0400] [Job 17] HWMargins = [ 8.400 8.400 8.400 8.400 ]
D [06/Oct/2010:11:48:16 -0400] [Job 17] Wrote 1 pages...
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_get_params(0x2623128, 0x7fff41eea720)
D [06/Oct/2010:11:48:16 -0400] [Job 17] before gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] after gdev_prn_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] Leaving cups_get_params()
D [06/Oct/2010:11:48:16 -0400] [Job 17] cups_print_pages(0x2623128, 0x7f485d7e3780, 1)
D [06/Oct/2010:11:48:16 -0400] [Job 17] cupsBitsPerPixel = 24, cupsWidth = 2976, cupsBytesPerLine = 8928, srcbytes = 8928
D [06/Oct/2010:11:48:16 -0400] [Job 17] End of messages
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state=3(idle)
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state-message="Processing page 1..."
D [06/Oct/2010:11:48:16 -0400] [Job 17] printer-state-reasons=none
Thanks in advance@kusmar
You could recompile the filter with --enable-debug. It will create the file "/tmp/epson-inkjet-printer-filter.txt" if you call the filter...
I installed the driver from epson-inkjet-printer-workforce-635-nx625-series-1.0.0-1lsb3.2.src.rpm and compiled the filter by myself. But I get an error if the filter will load the closed source core library of epson.
$ sudo cat /tmp/epson-inkjet-printer-filter.txt
[printJob:483] TRACE IN
[load_core_library:164] TRACE IN
[get_ppd_attr:139] PPD Attribute epcgCoreLibrary -> libEpson_WorkForce_635_60_NX625.so.1.0.0
[load_core_library:181] Failed to dlopen(libEpson_WorkForce_635_60_NX625.so.1.0.0)->/usr/lib/libEpson_WorkForce_635_60_NX625.so.1.0.0: undefined symbol: _ZTVN10__cxxabiv117__class_type_infoE
[load_core_library:242] TRACE OUT=1
[printJob:526] TRACE OUT=1
[eps_heap_usage_end:42] =============================================================
[eps_heap_usage_end:43] HEAP USAGE : max(0 bytes) leak(0 bytes)
[eps_heap_usage_end:44] =============================================================
_ZTVN10__cxxabiv117__class_type_infoE looks like libstdc++ - but I already have that library in /usr/lib
Does someone knows what library does he miss?
Edited:
It was no missing library. It is a really strange problem here. If I build it with my PKGBUILD it will give the error above.
If you go into the $srcdir, compile and overwrite it manually it will work properly.
cd "$srcdir/$_pkgname_filter-$pkgver"
make clean
./configure --prefix=/opt/epson-inkjet-printer-workforce-635-nx625-series
make
cp src/epson_inkjet_printer_filter /opt/epson-inkjet-printer-workforce-635-nx625-series/cups/lib/filter/epson_inkjet_printer_filter
pkgname=epson-inkjet-printer-workforce-635-nx625-series
_pkgname_filter=epson-inkjet-printer-filter
pkgver=1.0.0
pkgrel=1
pkgdesc="Linux printer driver for Epson AIO"
arch=('i686' 'x86_64')
url="http://avasys.jp/eng/linux_driver/download/lsb/epson-inkjet/escp/"
license=('GPL, LGPL, custom:AVASYS Public Licence')
depends=('cups')
makedepends=('rpmextract' 'libtool')
source=(http://linux.avasys.jp/drivers/lsb/epson-inkjet/stable/RPMS/x86_64/$pkgname-$pkgver-1lsb3.2.src.rpm)
md5sums=('e2240acfbad8f965b167f312aeefbfe7')
build() {
cd "$startdir/src"
rpmextract.sh $pkgname-$pkgver-1lsb3.2.src.rpm || return 1
tar xzf $pkgname-$pkgver.tar.gz || return 1
tar xzf $_pkgname_filter-$pkgver.tar.gz || return 1
cd $_pkgname_filter-$pkgver
aclocal
libtoolize
chmod +x configure
./configure --prefix=/opt/$pkgname --enable-debug || return 1
make || return 1
package() {
cd "$srcdir/$pkgname-$pkgver"
install -d "$pkgdir/opt/$pkgname/"
cp -r lib "$pkgdir/opt/$pkgname/"
cp -r resource "$pkgdir/opt/$pkgname/"
cp -r watermark "$pkgdir/opt/$pkgname/"
install -d "$pkgdir/usr/share/cups/model/$pkgname"
install -m 644 ppds/* "$pkgdir/usr/share/cups/model/$pkgname"
cd "$srcdir/$_pkgname_filter-$pkgver"
install -d "$pkgdir/opt/$pkgname/cups/lib/filter/"
install -m 755 src/epson_inkjet_printer_filter "$pkgdir/opt/$pkgname/cups/lib/filter/epson_inkjet_printer_filter"
Edited 2:
Ok, I found the problem. Arch's makepkg will add an "--as-needed" to LDFLAGS and the binary won't be linked to libstdc++.so.6 and libgcc_s.so because the binary does not need it but the core library of epson. I overwrite that with "--as-no-needed" and now it works. Added the package: http://aur.archlinux.org/packages.php?ID=42294
Last edited by Misery (2010-10-29 10:51:02) -
Jps filter error deploy ADF 11.1.1.1. to WLS 10.1.3.1
We changed our deployment strategy.
We install WLS From scratch.
We use Oracle Fusion Middleware 11g Application Developer Installer
There is no error in install and run .
We deploy and when we see jps filter error.
We clear the line about jps filter from web.xml
But error still the same
Failure occurred in the execution of deployment request with ID '1247137625457' for task '9'. Error is: 'weblogic.management.DeploymentException: ' weblogic.management.DeploymentException: at weblogic.application.internal.BaseDeployment.throwAppException(BaseDeployment.java:80) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:187) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.NoClassDefFoundError: oracle/security/jps/JpsException at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Class.java:2389) at java.lang.Class.getConstructor0(Class.java:2699) at java.lang.Class.newInstance0(Class.java:326) at java.lang.Class.newInstance(Class.java:308) at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:141) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:103) at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117) at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103) at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:172) at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:277) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:610) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:198) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Failure occurred in the execution of deployment request with ID '1247137625457' for task '9'. Error is: 'weblogic.management.DeploymentException: ' weblogic.management.DeploymentException: at weblogic.application.internal.BaseDeployment.throwAppException(BaseDeployment.java:80) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:187) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:197) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:45) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.NoClassDefFoundError: oracle/security/jps/JpsException at java.lang.Class.getDeclaredConstructors0(Native Method) at java.lang.Class.privateGetDeclaredConstructors(Class.java:2389) at java.lang.Class.getConstructor0(Class.java:2699) at java.lang.Class.newInstance0(Class.java:326) at java.lang.Class.newInstance(Class.java:308) at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:141) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121) at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:103) at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117) at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:103) at weblogic.application.internal.flow.HeadLifecycleFlow.createListeners(HeadLifecycleFlow.java:172) at weblogic.application.internal.flow.HeadLifecycleFlow.prepare(HeadLifecycleFlow.java:277) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:610) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:185) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:53) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:198) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)we have solved this problem.
İf a managed server is started using startManagedServer.cmd ile it set class path corrctly.
But if it is started rom web logic web console. The is an error for setting classpaths.
We tried this for windows and linux install. The same error happen.
it solved deployment problems also.
We wonder when Oracle middleware is cleaned from this kind of annoying, unmeaninfull .. bugs?
We had lost 4 (very valuable) day to solve this problem .
We want a program works when installed. configuration can give additional value. -
TREX 7.10rev8: Error during language selection
Hello,
As part of the TREX Post-Installation steps, I want to tell the TREX which languages it should consider in Automatic Language Detection. Currently, all available languages are selected and I want to reduce this to English and Dutch. When I make the appropriate change in the admin screen of the Preprocessor and try to save them, the following error message is issued:
Error: 9
KeyError Exception in Tk callback
Function: <bound method PreprocessorAdmin.saveConfig of <TrexAdminTool.PreprocessorAdmin instance at 0x000000000AA7AA08>> (type: <type 'instancemethod'>)
Args: ()
Traceback (innermost last):
File "E:\usr\sap\TRD\TRX15\exe\python_support\Pmw.py", line 1808, in __call__
return apply(self.func, args)
File "E:\usr\sap\TRD\TRX15\exe\python_support\TrexAdminTool.py", line 14223, in saveConfig
if self.checkboxFlags[language].get(): #flag is set
KeyError: 'persian'
There seems to be some issue with Persian, but this is not a language that is selectable from the Preprocessor Admin screen.
The error itself can be confirmed, but the change is not adopted. All languages remain selected. Any new change will result in the same error message.
Does anybody have an idea on how to solve this?
Best regards, WilbertHi Wilbert,
Please check, if there exist a file std.langid-config.template in the directory /usr/sap/<TREX SID>/<TREX Instance>/exe/lexicon
If yes, rename the file to std.langid-config and try it again.
Kind regards,
Roland -
Experts,
I've finished installing TREX on Unix and an attempting to run the Python installation check script:
runInstallationTest.py
I'm getting this error:
Traceback (most recent call last):
File "/usr/sap/TRX/TRX00/runInstallationTest.py", line 4, in ?
from testbase import TestBase, TestError
File "/usr/sap/TRX/TRX00/testbase.py", line 6, in ?
import fuzzypy
File "/usr/sap/TRX/TRX00/fuzzypy.py", line 897, in ?
from _fuzzypy import *
ImportError: No module named _fuzzypy
1. I run TREXSetting.sh to set the environment.
2. I ensured my permissions and ownership are correct as sidadm.
3. I moved runInstallationTest.py, testbase.py, fuzzypy (directory with contents) and all other fuzzy* files I could find into my <trex_home> directory.
Here's the current directory listing:
-rwxr-xr-x 1 trxadm sapsys 11764 Sep 11 2006 build_ssl.sh
-rwxr-xr-x 1 trxadm sapsys 460 Sep 11 2006 TREXAdmin.sh
-rwxr-xr-x 1 trxadm sapsys 76 Sep 11 2006 scripts.lst
drwxr-xr-x 2 trxadm sapsys 256 Mar 12 14:12 sec
drwxr-xr-x 2 trxadm sapsys 256 Mar 12 14:12 log
drwxr-xr-x 3 trxadm sapsys 256 Mar 12 14:12 data
drwxr-x--- 2 trxadm sapsys 256 Mar 12 14:13 doc
-rwxr-x--x 1 trxadm sapsys 5630 Mar 12 14:14 TREX
-rwxr-x--x 1 trxadm sapsys 1350 Mar 12 14:14 TREXSettings.sh
-rwxr-x--x 1 trxadm sapsys 1091 Mar 12 14:14 TREXSettings.csh
drwxr-x--- 3 trxadm sapsys 256 Mar 12 14:15 cloneInst
drwxr-xr-x 12 trxadm sapsys 4096 Mar 13 08:43 exe
-rw-rr 1 trxadm sapsys 2617 Mar 13 10:38 dev_rfc.trc
-rw-rr 1 trxadm sapsys 160402 Mar 13 10:44 rfc835720_00001.trc
drwxr-xr-x 2 trxadm sapsys 4096 Mar 13 13:42 fuzzypy
-rwxr-xr-x 1 trxadm sapsys 60839 Mar 13 13:43 testbase.py
-rwxr-xr-x 1 trxadm sapsys 102748 Mar 13 13:45 runInstallationTest.py
-rw-rr 1 trxadm sapsys 51951 Mar 13 13:46 testbase.pyc
-rwxr-xr-x 1 trxadm sapsys 40666 Mar 13 14:02 fuzzypy.py
-rwxr-xr-x 1 trxadm sapsys 12758 Mar 13 14:02 fuzzyconst.py
-rw-rr 1 trxadm sapsys 38592 Mar 13 14:04 fuzzypy.pyc
drwxr-xr-x 6 trxadm sapsys 4096 Mar 13 14:20 nwkwcs
What am I missing?
Thanks for your help!
JeffHello Experts.
SAP Global Support suggested the following for AIX ver 5.2:
hdodev01:trxadm 13> source TREXSettings.cshhdodev01:trxadm 14> /usr/sap/TRX/TRX05/exe/Python/bin/python /usr/sap/TRX/TRX05/exe/python_support/runInstallationTest.py
[1, 0.001] >> starting runInstallationTest (at Thu Jun 12 07:49:35 2008)
[1, 0.001] args: ()
[1, 0.001] keys: {}
<--- INSTALLATION TEST SUMMARY --->
--> Check 01: Show Installation History
+-----------------+----
NR ││ TYPE ││ INSTALL DATE ││ SID ││ VERSION ││ BUILD
+-----------------+----
+-----------------+----
0 ││ install ││ 2008-06-08 13:48:07 ││ TRX ││ 7.0.06.00 ││ 7006000420
+-----------------+----
1 ││ update ││ 2008-06-10 13:22:31 ││ TRX ││ 7.0.41 ││ 7041000503
+-----------------+----
--> Check 02: Ping TREX Services
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/04 ││ ping indexserver1 ││ host=hdodev01 port=30503 ││ OK
+--------+----
02/04 ││ ping nameserver ││ host=hdodev01 port=30501 ││ OK
+--------+----
03/04 ││ ping preprocessor1 ││ host=hdodev01 port=30502 ││ OK
+--------+----
04/04 ││ ping queueserver ││ host=hdodev01 port=30504 ││ OK
+--------+----
--> Check 03: Check TREX Web Site
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/01 ││ check web site ││ post xml request ││ skipped
+--------+----
--> Check 04: Check Process size
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/01 ││ Process size ││ cur = 2047MB > min = 1900MB ││ OK
+--------+----
--> Check 05: TREX Services and Third Parties Version
+--------+----
COMPONENT ││ COMPONENT_VERSION ││ COMPONENT_BUILD ││ CHANGE_LIST
+--------+----
+--------+----
indexserver1 ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
nameserver ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
preprocessor1 ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
queueserver ││ 7.00.41.00 ││ 700.41.144682 ││ 144682 (700_REL)
+--------+----
PYTHON ││ 2.4 ││ 216 ││ ---
+--------+----
FILTER ││ 8.2.0 ││ --- ││ ---
+--------+----
LEXICON ││ 3.7.3 ││ --- ││ ---
+--------+----
--> Check 06: Check TREX Healthiness
+--------+----
STEP ││ ACTION ││ SPECIFICATION ││ RESULT
+--------+----
+--------+----
01/20 ││ clean up index ││ clean up indexId = abc ││ OK
+--------+----
02/20 ││ create index ││ create indexId=abc ││ OK
+--------+----
03/20 ││ processing file ││ content of www.python.org ││ OK
+--------+----
04/20 ││ processing file ││ content of www.pythonware.com ││ OK
+--------+----
05/20 ││ processing file ││ content of python.oreilly.org ││ OK
+--------+----
06/20 ││ processing file ││ content of www.jython.org ││ OK
+--------+----
07/20 ││ exact search ││ query = ['jython'] ││ OK
+--------+----
08/20 ││ fuzzy search ││ query = ['jyto'] ││ OK
+--------+----
09/20 ││ linguistic search ││ query = ['questions'] ││ OK
+--------+----
10/20 ││ clean up index ││ clean up indexId = abc ││ OK
+--------+----
11/20 ││ create index ││ create indexId=queueId=abc ││ OK
+--------+----
12/20 ││ set queue parameter ││ bulkIndex=bulkOptimize=4 ││ OK
+--------+----
13/20 ││ processing file ││ content of www.python.org ││ OK
+--------+----
14/20 ││ processing file ││ content of www.pythonware.com ││ OK
+--------+----
15/20 ││ processing file ││ content of python.oreilly.org ││ OK
+--------+----
16/20 ││ processing file ││ content of www.jython.org ││ OK
+--------+----
17/20 ││ wait processing ││ elapsed time: 14.021 sec ││ OK
+--------+----
18/20 ││ exact search ││ query = ['jython'] ││ OK
+--------+----
19/20 ││ fuzzy search ││ query = ['jyto'] ││ OK
+--------+----
20/20 ││ linguistic search ││ query = ['questions'] ││ OK
+--------+----
-> Test Script Error Count: 000
hdodev01:trxadm 15> -
Hi
I have tried to get our TREX server to index some documents on our portal. Yesterday I sucseeded in this and indexed a document. Today I only get a preprocessor error 6404 and the indexing don't work anymore.
I get this information in the log file:
#1.5 #00123F687FBD007C0000002700001A9C000460FC4A3445E7#1232536599765#com.sap.portal.roles.RoleNavigation#sap.com/irj#com.sap.portal.roles.RoleNavigation#Administrator#1055##x051s01_EP1_236131250#Administrator#b7b6e1f0e7ac11ddba2a00123f687fbd#SAPEngine_Application_Thread[impl:3]_38##0#0#Error##Java###URL does not point to an object of type INavigationConnectorNode: portal_content/administrator/super_admin/super_admin_role/com.sap.portal.system_administration/com.sap.portal.system_admin_ws/com.sap.portal.system_configuration/com.sap.km.AdminConfig/com.sap.km.AdminSystemIndexes/relatedItems
[EXCEPTION]
#1#java.lang.ClassCastExceptionHi!
I have solved the problem, I got the 6401 error due to the wrong URL.
I found the URL in the trace in the TREX admin tool and I copied it to the web browser on the server where I run the TREX server. When I did this I got the error 401 in the web browser. I then tested to add the port number to the URL and then I could access the file.
I went to the URL generator in the portal and added the port number and then I could index the documents. -
Using Prsentation variable as filter error"None of the fact source are comp
Hi
I am capturing two date presentation variables SDATE and EDATE using calendar picker and i have a field for expected date which should be between the dates captured so the column formulas here are like
"CASE WHEN CASE WHEN '@{SDATE}' IS NULL THEN CURRENT_DATE ELSE CAST('date'||' '|| CHAR(39)||RIGHT('@{SDATE}',4)||'-'||LEFT('@{SDATE}',LOCATE('/','@{SDATE}')-1)||'-'||SUBSTRING('@{SDATE}'FROM LOCATE('/','@{SDATE}')+1 FOR LOCATE('/','@{SDATE}',LOCATE('/','@{SDATE}')+1)-LOCATE('/','@{SDATE}')-1 )||CHAR(39) AS DATE) END<CAST("- Opportunity Custom Attributes".DATE_25 AS DATE) THEN 1 ELSE 0 END"
"CASE WHEN CASE WHEN '@{EDATE}' IS NULL THEN CURRENT_DATE ELSE
CAST('date'||' '|| CHAR(39)||RIGHT('@{EDATE}',4)||'-'||LEFT('@{EDATE}',LOCATE('/','@{EDATE}')-1)||'-'||SUBSTRING('@{EDATE}'FROM LOCATE('/','@{EDATE}')+1 FOR LOCATE('/','@{EDATE}',LOCATE('/','@{EDATE}')+1)-LOCATE('/','@{EDATE}')-1 )||CHAR(39) AS DATE) END >=CAST("- Opportunity Custom Attributes".DATE_25 AS DATE) THEN 1 ELSE 0 END"
I am able to see the value 1 or 0 as per the formulas but now if i apply filter on these above columns say =1 or = 0 then as soon as i run dashboard it throws error as
"ORA-01841: (full) year must be between -4713 and +9999, and not be 0 at OCI call OCIStmtExecute" as in when there is no value for presentation variable.
If i pass some value in prompt then reports works fine.
Any thoughts will be really helpful.Just add a default value into the prompt.
If the default is really complicated then you might have to use SQL to get the default value you want. It's tricky but here's an example of one I've used that defaults the first day of the year:
SELECT date from "Lead Analysis" where date = TIMESTAMPADD(SQL_TSI_MONTH,-MONTH(current_date)+1,TIMESTAMPADD(SQL_TSI_DAY,-DAY(current_date)+1,current_date)) -
Performance point Filter error : " There was a problem preparing the WebPart for display"
I’m going to create a performance point filter .I chose “Custom Table” type to select Project Name for my reports. I have some reports which have Project Name (ProjectUID as value) as parameter .So I’m going to create a filter based on Project Name (ProjectUID
as value) to use for all report. these are my settings:
Table: MSP_EpmProject_Userview
Key :ProjectUID
Parentkey: (none)
Display Value: ProjectName
Is default: (none)
But when I add these web part to my page I see this error:
“There was a problem preparing the WebPart for display.
Column 'ProjectName' does not allow nulls.”
I don’t know what should I do
is there any other wy to do this?Hi,
I have a similar issue, did you manage to find a solution? -
SpryNestedXMLDataSet.js filter error = typo in script?
I have seen some topic popping around on the forum here and
there, about filter that aren't working on nested datasets.
So I went to check out this source code. And found something
wrong
On line 381 u will find
Spry.Data.NestedXMLDataSet.prototype.filterData =
function(filterFunc, filterOnly)
if (
columnNames)
var dsArr = this.nestedDataSets;
var dsArrLen = dsArr.length;
for (var i = 0; i < dsArrLen; i++)
dsArr
.dataSet.filterData(filterFunc, filterOnly);
I bolded the error as it should be filterFunc instead of
column names.
Do the same with function under it. so u have:
Spry.Data.NestedXMLDataSet.prototype.filterData =
function(filterFunc, filterOnly)
if (filterFunc)
var dsArr = this.nestedDataSets;
var dsArrLen = dsArr.length;
for (var i = 0; i < dsArrLen; i++)
dsArr.dataSet.filterData(filterFunc, filterOnly);
Spry.Data.NestedXMLDataSet.prototype.filter =
function(filterFunc, filterOnly)
if (filterFunc)
var dsArr = this.nestedDataSets;
var dsArrLen = dsArr.length;
for (var i = 0; i < dsArrLen; i++)
dsArr
.dataSet.filter(filterFunc, filterOnly);
So i wonder if this fixes the filter problems for any1. ( i
currently don't have data to test, will do some testing to
morrow)Hi V1,
I fixed that internally prior to the holiday break. I'll
check with Don to see if we can push it live so folks can get
access to the updated version of the nested data set files.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=602&threadid =1324357&highlight_key=y
--== Kin ==-- -
Com.sapportals.wcm.WcmException:TREX Name Server Error
Hi,
I have developed a Customised Search Iview using the STD KM Search Iview
But I getting the following error while I input a search criteria and click on the Search Button :
"Error during search occurred - com.sapportals.wcm.WcmException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)"
Please can anyone let me know why is this error been thrown.
Regards,
Vaishali.Hi.
I am having the same error, i already check the monitor and it shows the same error:
Error during search occurred - com.sapportals.wcm.WcmException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217).
There are two machines accessing TRX and one is working fine the other one does not. I made a ping from epweb to trx and does not respond. If i make de ping from epprd to trx it responds fine. What can i do?.
TRX is up and working fine.
Thanks for the help.
Edited by: Juan Pablo Toledo Corredor on Apr 16, 2009 8:13 PM -
Hi, I´m just learning and developing my first filter for After Effects I found something really weird.
I´m just making an easy zoom in and zoom out effect using 2 imput images, it seems to work OK in Pixel Bender.
this is my code:
<languageVersion : 1.0;>
kernel TwoImagesZooming
< namespace : "blablabla";
vendor : "Meh";
version : 1;
description : "zoom in zoom out with 2 images";
displayname : "Pixel Displacement Complex";
category : "AE filter category";
>
input image4 src;
input image4 src2;
output pixel4 dst;
parameter float ZoomA
<
minValue:0.0;
maxValue:1.0;
defaultValue:1.0;
>;
parameter float ZoomB
<
minValue:0.0;
maxValue:1.0;
defaultValue:0.0;
>;
void
evaluatePixel()
pixel4 dst2 = sampleNearest(src,outCoord()/float2(DisplacementA, DisplacementA));
pixel4 dst3 = sampleNearest(src2,outCoord()/float2(DisplacementB, DisplacementB));
dst=dst2+dst3;
but when I taste it in AE (CS4 by the way), it shows me these error:
Can Somebody help me to find whats going on....PleaseHi,
The error gives a hint what might be going on.
In below two calls you are diving outCoord() with DisplacementA & DisplacementB. If any of them is zero, you will get "division by zero" error.
pixel4 dst2 = sampleNearest(src,outCoord()/float2(DisplacementA, DisplacementA));
pixel4 dst3 = sampleNearest(src2,outCoord()/float2(DisplacementB, DisplacementB));
To fix it, you should make sure values of DisplacementA & DisplacementB are never zero. There are several ways of doing that: either you can set minValue of those parameters to be greater than zero or you can do things differently if their value is zero.
Hope that helps. -
Adaptive wide angle filter error for iPhone 4s in PS CC
Hello,
I have just watched a tutorial on Adobe TV regarding the new adaptive wide angle filter used on pre-stitched panoramas. I open an iPhone pano image. go to filter–>adaptive wide angle filter and in the lower left corner I find – as indicated as being requested to function properly the tut – the name of the camera, the lens and the f-stop with wich the image was taken. The filter does still not draw the automatic line on the corved part of the building I try to improve. Going to correction –> automatic in the upper right corner I get an error message that no matching profile for the iPhone's camera's lens could be found.
Why that when it is clerly indicated as being 4.28 mm etc already? The iPhone 4S has been here for quite a while and is widely used, so why the error?
Thanks for any hint!Thanks, Trevor.Dennis,
it did seem to work out for a moment the wayyou suggested: the drag line appered allright this time, but after adjusting the curved line the filter made a fisheye image out of my panorama, cutting off about 20% on each side and leaving a ragged edge remining of a circle.
I'll keep trying! -
TREX Patch Installation ERROR - DNS Domain Name
Dear all,
I have been facing a problem with a TREX Installation and I would like to request your help.
After successfully installing a portal (EP 7) and a TREX instance (7.00), I encountered the following error
while trying to install the TREX patch.
The Error that pops-up is the following:
"unknown message ID (osmod.hosts.getHostByAddress2) with parameter(s): -84.-230.-250.114".
This error appears when the installation reaches the 'DNS Domain Name' step.
The installation cannot procceed without resolving this issue.
I have been trying to install patch 49, which I have successfully installed in other TREX instances so there
should be no error with the binaries.
Has anyone come across a similar situation?
I would appreciate your input on the matter
Thanks in advance,
Kontogianni Eleni
Edited by: Eleni Kontoyanni on May 20, 2011 2:36 PMDear Eleni,
The issues that I have encountered where unrelated, otherwise I would have mentioned them for you as a clue
But what I was trying to say is that although sometimes prerequisites look OK there can be a bug or exception in the SAP coding that might cause this. Examples of these non-related issues are:
- https://service.sap.com/sap/support/notes/1114042
and
- when using the KM Portal Drive with a description that is "to long" connection is suddenly not possible.
I therefore advise you to open an OSS message @ SAP Support.
Cheers,
Benjamin -
A worker process with process id of '4316' serving application pool
'AppPool_SAP_TREX_02' has requested a recycle because it reached its
allowed request limit.
Hi I'm getting the above error in the system event log on my server. Has anyone seen this before?- update TREX and KMC versions and patch levels
- see SAP note 845974 for recommendations
Maybe you are looking for
-
How can I convert FLAC to ALAC with no loss?
I am looking for a reliable and relatively easy to use software or app to convert FLAC to Apple lossless so I can import into ITunes. I have searched far and wide and cannot get a straight answer. I am using an IMac and I just want something that
-
Authorization object - dump on field type due to character
Hi all, As i have created an Authorization object AUTHORITY-CHECK OBJECT 'YINF_BYTE' ID 'Y_BYTE_CON' FIELD lv_byte_count. While creating the authorization field ('Y_BYTE_CON' ), the data type I defined is ABAP_MSIZE.Similarly
-
Warning massage while saving the asset master record
Hi all, I have a problem while saving the asset master record.My client manages the group asset in the depreciation area 15 for tax reporting.What I have done in the configuration that, I have created a separate asset class for group asset and marked
-
Hi, how to send the message to all users within 10 mins server will stops to log off all the users before that.what is the proceddure to broadcast the message to users. Thanku
-
I am running windows 8. I am not at all familiar with the new system. I cannot download the latest version of flash player. How do I do that?