Tried to renew lease on lost reference

Hi all,
Can anyone pls help me with the following issue?
I have encountered the following message.
<ExecuteThread: '3' for queue: 'default'> <> <> <000000> <Tried to renew lease
on lost reference: '388'>
After a while, the following message will appear.
<ExecuteThread: '15' for queue: 'default'> <> <> <000000> <Unsolicited error response
for: '-1'>
This shows the threads in the server are all used up.
I will like to know the cause for the first message to appear and how to prevent
it. Whenever this message appears, it is telling us the server is going to hang
soon. We have no idea how to fix this problem. Can anyone help? Thanks.

I know the "tried to renew lease..." message you were getting was just some INFO
message that the server sent out. I believe this message has been surpressed
in Weblogic 6.1 SP3.
Not sure if the other message is part of that. I've been running with the service
pack for so long that I don't remember. :)
"apple" <[email protected]> wrote:
>
Hi all,
Can anyone pls help me with the following issue?
I have encountered the following message.
<ExecuteThread: '3' for queue: 'default'> <> <> <000000> <Tried to renew
lease
on lost reference: '388'>
After a while, the following message will appear.
<ExecuteThread: '15' for queue: 'default'> <> <> <000000> <Unsolicited
error response
for: '-1'>
This shows the threads in the server are all used up.
I will like to know the cause for the first message to appear and how
to prevent
it. Whenever this message appears, it is telling us the server is going
to hang
soon. We have no idea how to fix this problem. Can anyone help? Thanks.

Similar Messages

  • DGCserver messages in log... "Tried to renew lease on lost reference"

    Hi,
              I am running weblogic server 6.1 and get the following messages
              ####<Jan 30, 2002 2:36:55 PM CST> <Info> <DGCserver> <MBarton> <myserver> <ExecuteThread: '12' for queue: 'default'> <> <> <000000> <Tried to renew lease on lost reference: '706'>
              I have seen in the newsgroup that this was a problem previously in version 4.5.1
              any help would be appreciated.
              best regards,
              Mickey
              

              This shouldn't cause any problems. Does it? We will turn off these info messages.
              Cheers,
              -- Prasad
              Mickey Barton <[email protected]> wrote:
              >Hi,
              >I am running weblogic server 6.1 and get the following messages
              >
              >####<Jan 30, 2002 2:36:55 PM CST> <Info> <DGCserver> <MBarton> <myserver>
              ><ExecuteThread: '12' for queue: 'default'> <> <> <000000> <Tried to
              >renew lease on lost reference: '706'>
              >
              >I have seen in the newsgroup that this was a problem previously in version
              >4.5.1
              >
              >any help would be appreciated.
              >
              >best regards,
              >Mickey
              

  • Tried to renew lease for lost reference

    Hi
    Oracle sessions get stuck on parsing all sessions accessing the same object wait
    on "library cache pin".
    We found one session coming from jdbc client waiting on "SQLNET message from client"
    and holding all the rest sessions.
    When we kill this session the problem resolves.
    Following the port holding session with netstat, lsof and so on back to the jdbc
    client side on different machine we only see error message connected to the same
    port saying "tried to renew lease for lost reference". Our assumption is that
    oracle lost connection with the client while locking a DB object when was doing
    parsing and thus locked all sessions that wanted to access same object.
    Did anybody encounter the same problem? How was resolved?
    Thanks.

    "Rich Kolkmeier" <[email protected]> wrote in message
    news:3a366798$[email protected]..
    In testing the cluster failover capability, I disconnected the
    network cable from one of the servers I was running in a cluster.
    The system failed over properly. When I reattached the network
    cable, the system added the server back into the cluster. However,
    I continue to get the following message:
    Tue Dec 12 17:34:51 GMT 2000:<I> <DGCserver> tried to renew lease
    for 1 lost references
    (s).
    What is the cause of this message? What needs to be done to clean
    up the cluster?Rich,
    This message is printed when one WebLogic kernel tries to renew a lease for
    an remote object from another WebLogic which has already been collected. It
    makes sense that this might happen in the failure scenario you describe.
    When the network is disconnected DGC lease renewals can't be sent and the
    kernel exporting the object may therefore believe that the object is no
    longer in use and collect it. When the network is re-established the remote
    objects may be gone.
    However the fact that you are seeing this message printed repeatedly is
    troubling. You may want to contact [email protected] with the
    description you provided here along with the following additional
    information.
    Are you seeing this message on the client or server? If on the server is it
    on the server that was disconnected or on one of the other servers? What
    version (including service packs) of WebLogic are you running?
    Regards,
    Adam Messinger

  • Tried to renew lease on lost reference in logs.

              I am using Weblogic 6.1 SP1 with 2 cluster configuration. I am seeing a lot of
              "Tried to renew lease on lost reference" msgs in my logs. These msgs seems to
              be logged almost every minute.
              I would like to know what does this msg mean and how would I elimiate this msg
              from my logs.
              Any help will be appreciated.
              Thanks
              Albert
              

    I am relatively sure it has to do with RMI and distributed "garbage
              collection", so it may be related to some of your replicated JNDI entries.
              The other question is what is causing the problem in the first place. Are
              your servers under intense load or are the exec threads getting saturated
              (whether or not the other resources like CPU are saturated)?
              As far as the low-level RMI implementation, I know that Weblogic has its own
              implementation for significant portions of RMI, but I don't know much about
              the implementation, so it is hard to guess. You may be able to get some
              additional pointers from Prasad Peddada[[email protected]].
              Peace,
              Cameron Purdy
              Tangosol Inc.
              Tangosol Coherence: Clustered Coherent Cache for J2EE
              Information at http://www.tangosol.com/
              "Albert" <[email protected]> wrote in message
              news:[email protected]...
              >
              > Cameron,
              >
              > My application doesn't have any EJB's. It is a JSP/Servlet/Oracle based
              application.
              > Do you think of anything in this context.
              >
              > Thanks
              > Albert
              >
              > "Cameron Purdy" <[email protected]> wrote:
              > >Do you use stateful session EJBs? Make sure you remove them when done.
              > >
              > >Peace,
              > >
              > >--
              > >Cameron Purdy
              > >Tangosol Inc.
              > >Tangosol Coherence: Clustered Coherent Cache for J2EE
              > >Information at http://www.tangosol.com/
              > >
              > >
              > >"Albert" <[email protected]> wrote in message
              > >news:[email protected]...
              > >>
              > >> I am using Weblogic 6.1 SP1 with 2 cluster configuration. I am seeing
              > >a
              > >lot of
              > >> "Tried to renew lease on lost reference" msgs in my logs. These msgs
              > >seems
              > >to
              > >> be logged almost every minute.
              > >> I would like to know what does this msg mean and how would I elimiate
              > >this
              > >msg
              > >> from my logs.
              > >> Any help will be appreciated.
              > >>
              > >> Thanks
              > >> Albert
              > >>
              > >
              > >
              >
              

  • DGCServer - tried  to renew lease for lost ref: 509

    Recently we have been getting ALOTof messages in our server log file of the
    form:
    Fri Jul 14 10:08:19 PDT 2000:<I> <DGCserver> tried to renew lease for lost
    ref: 509
    We use RMI for java client to server communcation and are using Weblogic
    4.5.1 SP 8
    with nativeIO enabled.
    What could be causing these messages?
    Thanks!
    Rick

    Thanks! I still have one problem, the lease renewal messages for lost
    references never seem
    to end for the specific reference. I have a weblogic.log file with hundreds
    of those messages for
    each lost reference (and still going). It seems that it is not giving
    up... any ideas?
    Rick
    "Michael Girdley" <[email protected]> wrote in message
    news:396fa6c8$[email protected]..
    Normally, I would ask a customer in the situation to provide more about
    their application. But, since I know a lot about how your application is
    architected, I would guess the people are shutting down their browserswhile
    your applet still running. The applet is not closing the socket cleanly
    with Weblogic. The distributed garbage collector, which keeps track ofall
    of the distributed objects, is trying to renew a lease for that object.It
    cannot locate it and will eventually give up on it.
    Thanks,
    Michael
    Michael Girdley
    Product Manager, WebLogic Server & Express
    BEA Systems Inc
    Rick Spickelmier <[email protected]> wrote in message
    news:396f960d$[email protected]..
    Recently we have been getting ALOTof messages in our server log file ofthe
    form:
    Fri Jul 14 10:08:19 PDT 2000:<I> <DGCserver> tried to renew lease forlost
    ref: 509
    We use RMI for java client to server communcation and are using Weblogic
    4.5.1 SP 8
    with nativeIO enabled.
    What could be causing these messages?
    Thanks!
    Rick

  • DGCServer messages in log... "tried to renew lease"

    Hi,
              I'm running three WL 4.5.2 servers clustered, JDK1.1.7b on Solaris 2.6.
              Normally the cluster runs just fine, but now I'm beginning to see the
              following message in all three servers:
              <DGCserver> tried to renew lease for lost ref: nnn
              Usually they come in small bursts of about 5 or 10 messages that are the
              same, except the "ref"s keep increasing. I'm guessing it has to do something
              with the in-memory replication of sessions (which I'm using).
              Any ideas? I tried restarting the servers but after a little while the
              messages started again.
              Thanks,
              Matias
              

    One common symptom for this (Bad Status Exception) has been long gc. If gc
              takes more 30 seconds then you will start seeing these errors. To assertain
              this, you could turn on weblogic.debug.cluster=1 and if you see a message "Timed
              out server" in the log then you should tune your server.
              Please use latest service packs.
              thanks
              - Prasad
              Matias Pelenur wrote:
              > Well, after a few restarts the DGC messages aren't appearing anymore... But
              > something different is happening now which seems to be worse... And it's
              > affecting performance too. For some pages, one of the servers will throw a
              > bunch of exceptions (see below), and it seems it's cutting off the output so
              > pages get only half-created. Any ideas? I don't think I changed any settings
              > or anything like that.
              >
              > Thanks,
              > Matias
              >
              > Fri Sep 15 11:19:15 EDT 2000:<E> <HTTP> Servlet request terminiated with
              > Error:
              > Fri Sep 15 11:19:15 EDT 2000:<E> <HTTP>
              > weblogic.cluster.replication.BadStatusException: update found
              > 1802540915606489052 but it is not the secondary
              > at weblogic.rmi.extensions.BasicRequest.sendReceive(Compiled Code)
              > at
              > weblogic.cluster.replication.ReplicationManager_WLStub.update(Compiled Code)
              > at
              > weblogic.cluster.replication.ReplicationManager.updateSecondary(Compiled
              > Code)
              > at weblogic.servlet.internal.session.ReplicatedSession.sync(Compiled
              > Code)
              > at
              > weblogic.servlet.internal.session.ReplicatedSessionContext.sync(Compiled
              > Code)
              > at weblogic.servlet.internal.ServletRequestImpl.syncSession(Compiled
              > Code)
              > at
              > weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
              > at
              > weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
              > at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
              > at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
              > at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
              > --------------- nested within: ------------------
              > weblogic.utils.NestedError: Tried to update secondary, but it thought it was
              > the primary
              > - with nested exception:
              > [weblogic.cluster.replication.BadStatusException: update found
              > 18025409156064890
              > 52 but it is not the secondary]
              > at java.lang.Throwable.<init>(Compiled Code)
              > at java.lang.Error.<init>(Compiled Code)
              > at weblogic.utils.NestedError.<init>(Compiled Code)
              > at weblogic.servlet.internal.session.ReplicatedSession.sync(Compiled
              > Code)
              > at
              > weblogic.servlet.internal.session.ReplicatedSessionContext.sync(Compiled
              > Code)
              > at weblogic.servlet.internal.ServletRequestImpl.syncSession(Compiled
              > Code)
              > at
              > weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
              > at
              > weblogic.servlet.internal.ServletContextImpl.invokeServlet(Compiled Code)
              > at weblogic.socket.MuxableSocketHTTP.invokeServlet(Compiled Code)
              > at weblogic.socket.MuxableSocketHTTP.execute(Compiled Code)
              > at weblogic.t3.srvr.ExecuteThread.run(Compiled Code)
              >
              > "Prasad Peddada" <[email protected]> wrote in message
              > news:[email protected]...
              > > Is this causing any problems on the server. Like unable to create sessions
              > for
              > > servlets/jsp's
              > >
              > > If so, this is related to DGC bug, if not then it is something else,
              > unless we
              > > know the object it is trying to find, I can't be of much help.
              > >
              > > - Prasad
              > >
              > > Matias Pelenur wrote:
              > >
              > > > Hi,
              > > > I'm running three WL 4.5.2 servers clustered, JDK1.1.7b on Solaris 2.6.
              > > >
              > > > Normally the cluster runs just fine, but now I'm beginning to see the
              > > > following message in all three servers:
              > > >
              > > > <DGCserver> tried to renew lease for lost ref: nnn
              > > >
              > > > Usually they come in small bursts of about 5 or 10 messages that are the
              > > > same, except the "ref"s keep increasing. I'm guessing it has to do
              > something
              > > > with the in-memory replication of sessions (which I'm using).
              > > >
              > > > Any ideas? I tried restarting the servers but after a little while the
              > > > messages started again.
              > > > Thanks,
              > > >
              > > > Matias
              > >
              Cheers
              - Prasad
              

  • Lost reference in cluster

              Our app is deployed as cluster (two instances), recently we saw some errors as
              below. What's the cause of it, is it critical? Since it's labeled as 'info", should
              we just ignore it?
              Thanks in advance.
              ####<Apr 7, 2003 4:39:33 PM GMT+00:00> <Info> <DGCserver> <our url address> <m0034-instance1>
              <ExecuteThread: '34' for queue: 'default'> <> <> <000000> <tried to renew lease
              for 1 lost reference(s).>
              ####<Apr 7, 2003 4:40:32 PM GMT+00:00> <Info> <DGCserver> <our url address> <m0034-instance1>
              <ExecuteThread: '34' for queue: 'default'> <> <> <000000> <tried to renew lease
              for 1 lost reference(s).>
              

              Our app is deployed as cluster (two instances), recently we saw some errors as
              below. What's the cause of it, is it critical? Since it's labeled as 'info", should
              we just ignore it?
              Thanks in advance.
              ####<Apr 7, 2003 4:39:33 PM GMT+00:00> <Info> <DGCserver> <our url address> <m0034-instance1>
              <ExecuteThread: '34' for queue: 'default'> <> <> <000000> <tried to renew lease
              for 1 lost reference(s).>
              ####<Apr 7, 2003 4:40:32 PM GMT+00:00> <Info> <DGCserver> <our url address> <m0034-instance1>
              <ExecuteThread: '34' for queue: 'default'> <> <> <000000> <tried to renew lease
              for 1 lost reference(s).>
              

  • Self-assigned IP after trying to renew DHCP lease for former network

    Hi all,
    MacBook Pro 15" purchased in Februrary 2008, currently running 10.5.5, up-to-date with patches as of yesterday, 10/20/2008.
    For a few weeks now, I've been consistently unable to connect to wireless networks (secured or unsecured, public or private) after changing networks (i.e. going from home to a coffee shop).
    I have control over my home network router, and its logs show that upon connecting to the network, OS X tries to renew a DHCP lease for the previous network it was on. Upon receiving the "bad network" DHCP reply, instead of releasing the lease and obtaining a new one, the AirPort interface is immediately assigned an IPV4LL address (from 169.254.0.0/16) and no combination of changing network settings, changing AirPort settings, or rebooting will eliminate the old DHCP lease.
    The end result is that my MBP is entirely nonfunctional on some wireless networks that other clients (both Windows and Mac) seem to have no trouble accessing. The problem is quite annoying because I can't connect to access points that (previously) worked fine and whose configurations haven't changed.
    In any case where this problem occurs, an old DHCP lease for a different network (10.0.0.0/8 when trying to get on 192.168.0.0/24 or vice versa) is present, so I strongly suspect a DHCP problem. In all cases, I have perfect connectivity to the access point itself, so problems with the wireless connection parameters (including encryption), or those troublesome problems with 802.11b/g/n interoperation seem highly unlikely.
    One of two things would help me:
    1) Please tell me how to clear the DHCP lease cache. Deleting files from /var/db/dhcpclient/leases does nothing (they appear again upon reboot, identical save for timestamps even after changing network environments, so the cache must be read at boot time and written at shutdown). Selecting "Renew DHCP lease" from the "TCP/IP" tab in the advanced network settings merely attempts to renew the existing lease (for an invalid IP address); it does not appear to release invalid leases.
    2) If this is really how the DHCP client is behaving, change the DHCP client so that upon receiving the "Bad network" response, it releases (or simply abandons) the lease and obtains a new one, rather than immediately assigning an IPV4LL address to the AirPort interface.
    Additionally, is there any documentation on the Apple DHCP client? Under Linux, I could alter dhcpcd parameters to diagnose things like this. I could find no documentation about the Apple DHCP client outside of Mac Help, which wasn't really any help in this case.
    Finally, I do not suspect that this is an instance of the problem discussed in http://discussions.apple.com/thread.jspa?threadID=1352518&tstart=0 as my connection is rock-solid if it can get an IP address when it connects. I've never even seen it hiccup.
    Thanks,
    Matt Z.

    I have had wireless problems intermittently for a year, and seriously for 6 weeks. Apple denied the issue and was no help in spite of many tens of thousands of people on their own discussions complaining. I found a post suggesting a couple of things which fixed the problem. I don't know if both are necessary, but the first by itself does not solve the problem.
    Lock the channel of your router to channel 1, apparently Apple and 802.11n don't play well together on higher channels. When this becomes a standard this will be resolved I hope.
    Open your network preferences, select 'airport' and advanced. Delete unused networks. Select your network.
    Open TCP/IP and write down all the settings, configure iPv4 manually. Enter the settings manually. Turn off IpV6.
    Open DNS and write down your DNS server. Delete it and re-enter it manually.
    This has worked on 2 macbooks and an iMac for the last 3 weeks with no network drops.
    Joe Shea
    Philadelphia

  • Why does my ipad not have a renew lease button or a forget network button? it's a first generation i think

    Honestly, I'm at my wits end I've been trying EVERYTHING to get a wifi connection: I reset my network settings TWICE and reset my router and checked to see if my password was put in properly. This issue happened after my charger for my Ipad broke and I had to leave it dead for at the LEAST six months. During this time we lost our old network connection because it became unsecure and now anyone can use it so we got a new connection and it requires a password I have the password and evertime i put it in it refuses to work! Mind you my ipad never had an issue connecting to our old network that required a password (well used to). Ever since i charged it again for the first time in a long time it has only connected to the old network that is pretty much dormant and is a complete waste of time since it doesn't work right and now whats making me frustrated is that it won't connect to the old one either after i reset my network and it DOESN'T even need a password! like I really want to cry....I really need help with this.

    It doesnt have renew lease or forget network button either.

  • Wi-Fi Renew Lease Not Working

    The Wi-Fi connection for my 3Gs on my Airport Extreme home network occasionally quits working, but by doing a Renew Lease under network settings on the phone I 'was' able to get it working again it right away. But now for some reason that no longer works. Any suggestions?
    I tried Forget this Network and reconnecting, but that didn't do it.

    Well I called Apple and they were absolutely no help. They said the problem was likely with my Airport and not the phone, so I'd have to pay for support. I think that's bogus

  • RPC Server is unavailable when trying to renew or request a new certificate with new key

    Hi
    I have a couple of wireless access points (AP's) that are unable to use our RADIUS server to authenticate.
    This started happening after a power outage, and I did a gracefull shutdown of the RADIUS server.  When the server was booted up the AP's appear to have lost the ability to authenticate users of both PC's and mobile devices.
    I looked through the Network Policy server  MMC and didn't find anything there.
    Next I looked at the certificates and found 2 in the Personal>Certificates folder, that I think are related to this configuration.  The odd thing is they expired the exact same day as the power outage.  
    So I tried to Renew and then Recreate the certificate's key. That's when I received the RPC server unavailable.  I also tried creating a new key from scratch, same problem.
    I did a lot of searching on the web so I have seen this thread and I have checked all the things recommended, none of the suggestions helped:  
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/2b93bfa8-c162-4fc8-9cf3-a8f8f8c8ff29/rpc-server-is-unavailable-requesting-a-new-certificate?forum=winservergen
    I must admit I am at a loss as to where to look next. 
    Help is very much appreciated.

    Are you also the admin of the certificate authority? 
    =====I am the admin, but my knowledge of this topic is low.
    If the CA is operational, the next steps are:
    - Any firewalls between your client and this CA? Did somebody change the desktop firewalls settings at the CA?
    ===== There are no firewalls between the client and CA nor have the desktop firewall rules changed.
    - Can sombody (the PKI admin?) confirm that the CA works fine and other clients can enroll? What's the difference between those clients and yours?
    ===== I will see about trying this out and report back. 
    - Is the CA probably in a different domain and does Kerberos authentication work fine between domains? I had sometimes seen things like: CA is in a root domain but clients cannot talk to Root DCs as per firewall settings - thus clients cannot get Kerberos tickets
    from the domain hosting the CA. (Certificate enrollment is sometimes the first application that really requires Kerberos and cannot fall back to NTLM). A network trace would help here.
    =====
    The CA is in the same domain. 
    - Did somebody tweak with DCOM permissions or lock down flags at the CA (unlikely)
    ===== The DCOM settings haven't been touched by anyone. 
    Thanks

  • How do i solve the problem with repeated renew lease requests

    How can i solve the problem of repeated renew lease requests?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430http://support.apple.com/kb/ht1430
    You don't say what you are doing or trying to do. See #5 below.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netwhttp://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-wonhttp://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bughttp://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading-http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hhttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sighttp://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-Ohttp://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connecthttp://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipadhttp://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asphttp://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxEhttp://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmzhttp://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Itouch 2nd gen. have to renew lease after every sleep mode

    Recently my wife and I are having trouble with constantly renewing the lease for internet through wifi in our home. Wife has ipad and I have itouch 2nd gen. Any one know how to fix this. Can't think of any changes except for my itouch upgrading to 4.2.1

    Yes, I tried resetting the network on both devices, but was unsuccessful. I did a total reset of the modem and router and the problem remained. Finally, I enabled the RIP which allows the router to send and recieve packets from the ISP. This seemed to have fixed the problem. I have not had to renew lease, since. Thank you for your reply. That was a good start.

  • Version 4.1 Renew Lease Problem

    Since upgrading my Gen2 iTouch to Version 4.1, I have to frequently click the "Renew Lease" button to connect to my home network. By frequently, I mean 1 or more times each day. This NEVER happened (not even once) prior to upgrading to 4.1 and have had my Gen2 since they first went on the market.
    Anyone else having this problem? Is there a solution or is this a bug in the new firmware?

    Have you tried resetting your router? Unplug it and wait ~15 sec, plug it back in. Also, make sure it has the latest firmware.
    You can also try resetting your ipod - press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.

  • I have just upgraded my 2 apple computers to OX Lion and my macbook pro is having ip address issues. I have manually changed the ip address, renewed lease which works but everytime I switch on it does not connect to wi fi until I edit the ip address.

    I recently upgraded to OX Lion and have an ipod, ipad, iphone and other apple mac computer on the network besides my macbook pro.
    Since the upgrade I am having issues with my ip address. I have edited this number under renew lease, taken it to a manual edit and on any of these occassions found an address which allows the computer to go on wi fi.
    However everytime I use my computer it starts off without wi fi and I have to manually go back to ip address and either adjust to manual or renew lease.
    Any ideas?

    While we all have MacBooks in this forum most of us don’t have Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer.  https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Maybe you are looking for

  • How do i access icloud from my sony laptop. ive taken photos from my 5s iphone and dont know how to send to icloud then see them from laptop

    How do I access icloud from my sony laptop. do my photos go automatically to the cloud from my 5S iphone?

  • Audio not working on iPad

    I have been experimenting with converting some Flash animations to JavaScript with Flash CC, and so far I am impressed! One issue I'm having is that the audio plays correctly in the desktop browser, but the audio does not play on the iPad. Any ideas?

  • Macbook Pro not saving local time machine snapshots

    Hi, First time using the Apple forums here but I can't seem to find a definate answer for my question. I purchased a new Macbook Pro last week that came with Lion preinstalled. I noticed it was taking local time machine snapshots. In Time Machine it

  • Problem connectiong laptop to WRT54GS

    I have installed a wireless network using a WRT54GS. I have turned off the SSID broadcast for security reasons as suggested by a number of sources. Everything has worked just fine. However now when I try to connect my laptop, I get the message that t

  • Editing Stereo Tracks

    Here's my situation; I want to be able to edit a stereo pair at the same time with all changes I apply to the left being applied equally to the right. I need to tweak some of the audio, take out background noise, adjust levels, etc. and my stereo pai