Trigger a workflow with the Owner field value

Hi
I need to trigger a WF when Owner = abc.
I have tried all the possible ways like [<Owner>]="abc", fieldvalue('<Owner>')='abc', but the WF is not getting triggered. If anyone has an idea on what is going wrong and how it can be rectified, Kindly help
Thank you
Meena

I fought this for a while but was able to get it to work. You need to use the following syntax:
([<OwnerId>] = 'RowIDThatYouWantToTriggerOffOf')
In order for you to test the workflow you need to log out of CRMOD and re-login. This is key because if you skip this step it appears that your change did not work.
Hope this resolved this for you.
Neal G.

Similar Messages

Does Kodo 4.1 support embedded with the owner-field attribute?

Does Kodo 4.1 support embedded with the owner-field attribute?
My investigations so far say no, that it is infact ignored. This is a very serious problem for the project I am working on.
Please proove me wrong...

A lot of it stems from the large and complex nature of the models we employ. Hardly a week goes by that we don't grind to a halt due to a bug in jpox. That then leeds to the thorny problem of trying to discuss the problem on the jpox forums, where there are basically only two members that know the product well enough to help... Net result, they are overwhelmed, and from one of them it comes across in the rudeness of replies. This puts people off, including us.
I contrast this with the Hibernate and Spring communities, which I have personally been involved with and found to be both thriving and rewarding.
A bit of QA and respecteful support will be wonderfull. We are happy to pay a company for that because of the man hours it saves. I sincerely hope that Kodo JDO works out for us.

How can we read the screen field values from the report selection screen wi

Hi expart,
How can we read the screen field values from the report selection screen with out having an ENTER button pressed .
Regards
Razz

use this code...
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_posnr.
**Read the Values of the SCREEN FIELDs
CALL FUNCTION 'DYNP_VALUES_READ'

How to get a minus sign with the cost field in ALV.

Hi ,
How to get a minus sign with the cost field in ALV.
The Ouput will be displayed like Rs -1500 instead of 1500-
I can't use concatenate also as i may have to use the sum functionality of ALV .
Cheers
Sunny

Hi sunny,
1. The OTHER FIELD
has to be character field of say length 15.
2. Write the original numeric value to
this character field (in a loop)
3. But simply writing won't help.
4. use this kind of logic.
5.
REPORT abc.
DATA : m TYPE i.
DATA : chr(15) TYPE c.
m = -100.
WRITE m TO chr.
IF m < 0.
SHIFT chr RIGHT BY 1 PLACES.
CONDENSE chr.
CONCATENATE '-' chr INTO chr.
ENDIF.
WRITE chr.
regards,
amit m.

Need help with the session state value items.

I need help with the session state value items.
Trigger is created (on After delete, insert action) on table A.
When insert in table B at least one row, then trigger update value to 'Y'
in table A.
When delete all rows from a table B,, then trigger update value to 'N'
in table A.
In detail report changes are visible, but the trigger replacement value is not set in session value.
How can I implement this?

You'll have to create a process which runs after your database update process that does a query and loads the result into your page item.
For example
SELECT YN_COLUMN
FROM My_TABLE
INTO My_Page_Item
WHERE Key_value = My_Page_Item_Holding_Key_ValueThe DML process will only return key values after updating, such as an ID primary key updated by a sequence in a trigger.
If the value is showing in a report, make sure the report refreshes on reload of the page.
Edited by: Bob37 on Dec 6, 2011 10:36 AM

Problem with the quantity field

hi every one
i am facing a problem with the quantity field (vbap-kwmeng)
as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
problem is input of length of quantity is 15 and the output length is 19
so when i am pressing save
say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
how can i capture the original changed value.
vamsi

what about define two fields in you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
you can test it,mybe some one has one better idea.

Is i possible to trigger a workflow from the creation of an event in iCal

Is i possible to trigger a workflow from the creation of an event in iCal
Or is is possible to create a workflow to ad events to an iCal calendar which then triggers the workflow or is combined with the ad events workflow.
Graeme

Hmm, nope. Not that I'm aware of. Very few apps allow you to hook scripts directly to user activity. Finder* is a notable exception. iCal's "publish" feature has the ability to auto-update after user activity, but you'll either need dot mac accounts or your own webdav server to get that working.
I'd re-consider the idea of triggering a periodic workflow with iCal. That way if the computer is shut down or asleep, iCal will wait to run the workflow at its next opportunity. You could hide the unsightly repeating events in a second calendar so they're out of the way.
The next best thing is to write a faceless AppleScript application with a long-duration idle handler. The user would simply add it to their login items in System Preferences. This would also resume its cycle after sleep or shutdown.
Yet another option is to write an AppleScript that can register itself in the crontab. This has the advantage of running at a predictable time. If you're careful, you can even set the script to wake up or power on the computer as necessary.
* Folder action scripts can be triggered when files are created, moved, or deleted, but not when they're merely updated. This probably rules out much of iCal's activities in ~/library/application support/ical/.

Name cannot begin with the '\"' character, hexadecimal value 0x22

I am trying to create Calculated Column in SharePoint Document Library using Client Object Model.
However getting following error while executing FieldSchema:
Name cannot begin with the '\"' character, hexadecimal value 0x22
Code:
var calculated = "Calculated";
var displayName = "Effective Date";
var internalName = "Effective Date";
var formula = "=IF(ISBLANK(Col_DocumentEffectiveDate),\"\",TEXT(Col_DocumentEffectiveDate,\"DD-Mmm-YYYY\"))";
List lib = clientContext.Web.Lists.GetByTitle(docLibName);
clientContext.Load(lib);
clientContext.ExecuteQuery();
string fieldSchema = "<Field Type=\"" + calculated + "\" DisplayName=\"" + displayName + "\" Name=\"" +internalName+ "\" Formula=\"" + formula + "\"
/>";
lib.Fields.AddFieldAsXml(fieldSchema, true, AddFieldOptions.AddFieldInternalNameHint);
clientContext.ExecuteQuery();
Code does't work if i replace quotation marks("\) in Formula with """
Could someone help with issue?

Hi,
I suggest you take the code below which works in my environment to do the test again:
ClientContext clientContext = new ClientContext("http://sp/");
List list = clientContext.Web.Lists.GetByTitle("List2");
FieldCollection fields = list.Fields;
clientContext.Load(fields);
clientContext.ExecuteQuery();
var displayName = "Cal2";
var formula = "=IF(ISBLANK([Created]), \"\" , TEXT([Created], \"DD-Mmm-YYYY\"))";
var fieldSchema = "<Field Type='Calculated' DisplayName='" + displayName + "' ResultType='Text'><Formula>" + formula + "</Formula></Field>";
fields.AddFieldAsXml(fieldSchema, true, AddFieldOptions.DefaultValue);
clientContext.ExecuteQuery();
Feel free to reply if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

How to pass the FORM Fields value by Form Personalization

Hi ALL,
I want to pass form filds values in to procedure. I am calling this procedure through form personalization of that form..... But it's not accepting any form field's value there... when i am passing hardcoded vales procedure is executing fine...
can any one suggest what to do???
i tried with these syntax
TEST_EMP_FP(:ADDR.ADDRESS_ID,'ABC')
TEST_EMP_FP(${item.ADDR.ADDRESS_ID.value},'ABC')
Regards
Ravi

Hi,
Iam calling an SRS from forms personlization. Can any body tell me how to pass the Form field values as parameters to the Reports. (Example when they call this Concurrent request from Transact5ions screen, The invoice number should be defaulted in the report parameter).
Regards,,
Anil.

Mobile Code Signing Certificate - The publisherId field value is invalid.

Hi,
I have registered with MS and I am trying to obtain the Symantec certificate. I have pasted my publisher ID e.g. CN=5gv5
etc into the field and entered my primary email associated with the account, however it says:
The publisherId field value is invalid.
I have had a phone call confirming the details, so I'm not sure why this error is flagging, any ideas? Is there anyway of contacting someone to chase this up?
Thanks, Matt.<o:p></o:p>

The publisher ID is currently a 7 digit number which was missing from our dashboard. Symantec support cleared up through our preferred supplier.

Dealing with the 255-field limit

Hello,
In one of my AW DB — a file with which I keep track of my student records, like grades and absences — I have 3 x 60 fields to count the absences, in each of the trimesters and the number of 50-minute class could be close to 60.
The classes fields are labelled: '01', '02', ..., '60'; '2.01', '2.02', ..., '2.60' and '3.01', '3.02', ..., '3.60'.
The value fields of each of those fields are: “ “, “.” and “f”. The default is “.”.
The way for counting the absences of the 1st trimester, using 3 fields, i.e., the number of “f” is:
T1_Faltas1=
COUNT2("f",'01','02','03','04','05','06','07','08','09','10','11','12','13','14' ,'15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30' )
T1_Faltas2=
COUNT2("f",'31','32','33','34','35','36','37','38','39','40','41','42','43','44' ,'45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
T1_F=
IF(OR('Situação1'="Regular",'Situação1'="Incluído"),'T1Faltas.1'+'T1Faltas.2',"")
This has been functioning well for some years.
The problem appeared now, because I am going to teach classes to 5th and 6th year of another State School and those grades have 5 Math classes a week — instead of 4 classes. Then, I would need around 15+ classes fields for each trimester.
But the real situation is that I can not create those extra fields because my DB has a limit of 255 fields and I already reached that number of fields.
I can resolve this by using a single class field for a day that has 2 classes, and the options would be: “ “, “..”, “ff”, “.f”, “f.”
Note: the option of a “ ” empty space or a double empty space are for the students that left that group; the options “.f”, “f.” are for students that were in one of the two classes of a day and the option “ff” is for the ones that were absents in both classes of a given day.
The problem would be to count the absences: I know how to do it, using a lot of fields — but the limitation of fields is the big problem — and I am writing you to get a better solution.
If I could create more fields, I would do the following for each of the trimester, say T.1:
1)T1f1=
COUNT2("f",'01','02','03','04','05','06','07','08','09','10','11','12','13','14' ,'15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30' )
2)T1f2=
COUNT2("f",'31','32','33','34','35','36','37','38','39','40','41','42','43','44' ,'45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
3)T1.f1=
COUNT2(".f",'01','02','03','04','05','06','07','08','09','10','11','12','13','14 ','15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30 ')
4)T1.f2=
COUNT2(".f",'31','32','33','34','35','36','37','38','39','40','41','42','43','44 ','45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
5)T1f.1=
COUNT2("f.",'01','02','03','04','05','06','07','08','09','10','11','12','13','14 ','15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30 ')
6)T1f.2=
COUNT2("f.",'31','32','33','34','35','36','37','38','39','40','41','42','43','44 ','45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
7)T1ff1=
COUNT2("ff",'01','02','03','04','05','06','07','08','09','10','11','12','13','14 ','15','16','17','18','19','20','21','22','23','24','25','26','27','28','29','30 ')
8)T1ff2=
COUNT2("ff",'31','32','33','34','35','36','37','38','39','40','41','42','43','44 ','45','46','47','48','49','50', '51','52','53','54','55','56','57','58','59','60')
At each trimester end, the total of absences would be something like this:
9)T1_F=
IF(OR('Situação1'="Regular",'Situação1'="Incluído"),'T1f_1’T1_f_2+T1_.f_1+T1_.f_2+T1_f._1+T1_f._2+2T1_ff_12T1_ff2,"")
So, using 9 fields — instead of 3 — for each trimester, I could do the task.
Maybe I can stay with this solution — depending on how many days that I will have 2 classes — using only one field — but I would like to see if I can come with a solution that counts the absences using less fields, say just counts how many ‘ f ‘ each student has.
Any help will be appreciated,
Jorge Lucas, the guy from Rio Grande do Sul

Yvan The Terrible,
I am not surprised that you were able to write this script for me; it did not completely solve the task but it did an important portion. This is not the first time you wrote a script for me.
Seeing the result, I thought that one could rewrite it the other way around, i.e.: with the fields and the field types of a given DB, one could write a script to build a new AW DB, with those fields. Of course, the first script to get those fields and field types should be deeper to extract the formulas of Calculations Fields and the options for the Value List Fields.
Since I have 180 Value List fields with exactly the same options, it would be very much easier to have those in a SS module, before recreate — or just create — the DB. Besides those, there are a number of calculations fields, that are pretty much alike, with some adaptations. It would be very easy to redesign the DB.
I am not asking you to do this, but I would not doubt that it is possible.
The only thing that would consume time would be designing the layouts, unless one could be able to do this given, at least, the sizes of the fields (imagine that you have the sizes of most of the fields, say 60, inserted in a customized layout, instead of 1 inch width!); this would be really difficult, but here one question is too important, in order to recreate an DB file:
*+Is there a way to import a layout from a DB file to another DB file with the same fields of this very layout?+*
About the origins of AW and FMP: several years ago I pass some time playing at the FMP 3.0; after I saw the version 6.0 and later the version 9.0 — +it looks like some time I will see the FileMaker Pro 12.+
I remember perfectly well that the creation of the fields in the FMP 3.0 was very much similar to ClarisWorks. After, I was able — seeing the templates — to create a relational DB with 6 to 8 files in the FMP 6.0. Of course, like Barry said, the learning curve is steeper.
But I felt at home.
It surprises me that both you, Yvan — on this forum — and Barry — on a direct message — said that they were created by different teams. My guess is that one copied the other.
Thanks for your time!
Best regards,
Jorge Lucas (the guy from Rio Grande do Sul)
P.S.: +if I ever grew up — I am only 55 — I wanna be like you: a terrific expert in building AppleScript scripts.+
Message was edited by: Jorge Lucas
Message was edited by: Jorge Lucas

Who has changed the Custom Field value?

Dears,
Need to know the information regarding how to fetch that who has changed the Custom field value from PWA/MPP.
Example:
There is a PDP (say ProjectInfo):
There is a Custom Field added to that PDP (say Project Status = In Progress).
Now for ProjectA, someone has checked out and changed the Custom Field "Project Status" from "In Progress" to "Closed".
I need to fetch the information regarding who has changed that Custom field.
In which direction should I move: Event Handlers, PSI???? Any other stuff?
Thanks & Regards,
Shravan

Hi Shravan,
I'm not a developer but I do know that you can use an event handler pushing the resource name and date in custom fields.
Another way is to use a 3rd-party tool like
FluentPro Audit Tool.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

I need a report with the following fields

Hi All,
I need a report with the following fields & G/L "Expenses" only.
1)G/L Code.
2) G/L Name.
3) G/L Balance
& Selection Criteria From Date, To Date , & Location(for me locations is PROFITCENTRE).
Please some body suggest me an SQL Querry to fetch this result.
Thanks in Advance,
S. Mobin

Hi!
Individual G/L means i didn't understand
check this for only Expence Acc
Declare @FromDate Datetime
Declare @ToDate Datetime
Declare @Location nvarchar(20)
set @FromDate = (Select min(S0.RefDate) from jdt1 s0 where s0.Refdate >='[%0]')
set @ToDate = (Select max(S1.RefDate) from jdt1 s1 where s1.Refdate >='[%1]')
set @Location = (Select max(s2.ProfitCode) from jdt1 s2 where s2.ProfitCode = '[%2]')
select
J1.Account,
max(A0.AcctName) as Name,
j1.ProfitCode as Location,
sum(J1.debit-j1.credit) as Balance
From
JDT1 J1,OACT A0
Where
J1.Account=A0.AcctCode and
J1.RefDate >=@FromDate and
J1.RefDate<= @ToDate and
j1.ProfitCode=@Location and
A0.GroupMask = 5
Group By
J1.Account,j1.ProfitCode

Is there a way to print the check register with the Text field

Hi,
Is there a way to print the check register with the Text field and also each item's Text field?"
When we enter a invoice we enter a generic text on the Basic Data tab then enter a "+" on each individual line item which in turns defaults to the generic text. Just wanted to know if the check register could draw in the individual line item detail where we can enter text that relates to just that line item. Sort of like the MIR7 draws in the detail for each item.
Kindly help me in full fill the above requirement.
Thanks
Sunitha

Hi,
Can any one help me on this issue?
Thanks
Sunitha

I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

I've purchased a phone Yvonne appeared that the phone was stolen , and you connect with the owner of the phone did not respond to Vkpf you helped me , because I have to pay a sum of money and did not know that the phone was stolen

Return it. If you can't return it, turn it over to the police and consider this a life lesson.

Trigger a workflow with the Owner field value

Similar Messages

Maybe you are looking for