Generic Data source Issue with Infoset

Hi Experts,
I have created generic data source with Infoset.As per customer requirement, I have to modify join condition between tables from equal to left outer join in infoset.I have tested scenario successfully using infoset query. I have done below steps in generic data source to check the same result.
1.Modified Join condition in infoset and generated the infoset again.
2. Generated generic datasource in RSO2.
When I check same scenario in RSA3, I am getting 0 records.Please help me out.
Thanks in Advance.
Regards,
Raju

Thanks Sriram for your reply.
I am using same user id for both SQ02 and RSA3.
I have Two infosets with same join conditions.I have created SQVI report with First infoset and Generic data source with second infoset.
I have changed join condition second infoset which is used for generic data source.I am still getting same number of records in both SQVI report and in RSA3.I have validated records by considering few records to cross check again.
The change in join condition doesnt show any impact in changing the number of recrods.
I  have activated extraction structure in RSA6 but still getting same records.
Thanks,
Raju

Similar Messages

  • Generic Data source based on Infoset

    Hi,
    I have a Generic data source based on Infoset. i need hostorical data from this data source, when i extract it is given me only current data. Infoset based on PNPCE logical database, in the Infoset query (ECC6) when i select "All" it gives all data, but when i extract with RSA3 with perticular personal number it just give me 1 record,
    Please help me to fix this problem.
    Thanks

    i think you mean to get data relevant to a date. have you setup the begda/enda as selection parameters in the generic datasource? that would be the only aside from a custom  program to first fetch the data and then send it to bi.
    with the dates, you can pull it with the relevant date range setup in the infopackage

  • Generic Data Source issue in CRM.

    Hi Guru's,
    Generic Data Source with Table gave an issue "invalid Extracture structure template XXXXX of Data source  XXXXX"
    Generic Data source with Function Module gave an issue "Units field VOLUM_U for field VOLUME of DataSource ZTEST_XYZ is hidden"
    Generic Data Source with View configured successfully but the data is not coming in Extractor Checker.
    Three tables has taken in to consideration. I think there might be some issue with Join condition.
    Can any one through light on this incident.  Your help will be appreciated.
    Thanks in Advance.
    Venkat.

    Hi Praveen,
    yes you are right.  I took reference field as VOLUM_U.
    I have created Generic Table.  Do you need me to take same table in the reference Table.
    Thanks
    Venkat.

  • Generic Data Source issue

    Hi Friends,
    We have Generic Data Source (Delta Capable) which is based on Function Module.
    For this Data source I am looking for
    1) Relevent Outbound Queue Name in SMQ1
    2) Relevent R3 Back ground Job which is responsible for data load from Out Bound Queue To Delta Queue
    3) Relevent Setup Table in R3 system
    4) Is procedure for filling setup table for this generic data source is same as 2LIS Application Specific Data sources?
    Thank you.
    Tony

    1) Relevent Outbound Queue Name in SMQ1
    Generic datasources dont have outbound queue.
    2) Relevent R3 Back ground Job which is responsible for data load from Out Bound Queue To Delta Queue
    No outbound queue hence no job.
    3) Relevent Setup Table in R3 system
    No Setup table for generic datasource.They fetch directly from R3 tables either directly or via function module.
    4) Is procedure for filling setup table for this generic data source is same as 2LIS Application Specific Data sources?
    No set up tables for generic datasources.
    Generic data sources with delta have delta queue only.
    Hope this helps.

  • Generic data source issue very urjent

    HI All,
    this is regarding Generic datasource in Quality system . I have to change selection and Hide options i mean i have make check for generic data source. can you please let me know if anybody knows how to change.
    i tried to change it's showing dissable only, is there any other process
    regards
    kk

    Hi Friend,
    You are not supposed to do any changes in the quality system.Even system doesnt allow you to do the respective changes.The screen appears u like disable mode.
    Go to Development system and do the respective changes in the datasource.
    Selct the required datasource and choose edit mode option . Then select the required fileds.*After that save the datasource and succesfullu doing changes in the datasource move the respective datasource into qualitysystem.
    Hope it will helpful for you.
    Cheers,
    Chandu.
    Edited by: chandu guduru on Aug 28, 2008 1:53 PM
    Edited by: chandu guduru on Aug 28, 2008 2:02 PM

  • Generic Data Source -  Generic Delta

    Hi All,
    is it possible to create a Generic data source delta with two values.
    I mean suppose I need to extract data sat based on ERDAT.
    Now In the Generic Delta I have the date to make it delta but my requirement is like making this date dependent on two dates One ERDAT and second is like always Sy-datum.
    So Delta should work on ERDAT and SY-DATUM simultaneously.
    Is there any way to do it.
    Any help is highly appreciated.
    Thanks,
    Anjna

    Hi Anjana,
    In one datasource you can only specify one field for generic delta,
    As an alternate solution:
    1. Develop Generic Extractor based on FM
    OR
    2. Create 2 datasource one for new records and second for changed records and consolidate data in BW
    Please refer the below links...It may be of help for you..
    http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
    /people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
    Hope it helps,
    Rgds,
    Amit Kr.

  • Generic Data source with Infoset Query

    Hi All,
    Please provide me the links or PPT's or Information or PDF's for the creation of the Generic Data source with Infoset Query or
    Please explain in clear steps how to create Generic Data source with Infoset Query.
    Thanks & Regards,
    Ravi

    Oopps...being a BI guy, always think of BW
    I have never created, though I will suggest to follow this:
    A query can be created to extract information from master records i.e Infotypes. For example, by creating a query , the data relating to an employee contained in various Infotypes can be extracted.
    Proceedure :
    Decide on the various Infotypes we want to make the query. Decide on the area where we want to query i.e Global area or Standard area. Standard area is client specific and globel area will include all clients.
    Menu : HR u2013 PM u2013 Admn - Information System - Adhoc Query
    Select area standard and select the user group already created
    Creation of new query :
    TC SQ03 - Select Environment u2013 Select Standard Area - Enter -- If new user group is to be created, enter name of the user group, click on create and enter necessary information and exit after saving
    TC SQ02 - Enter name of the Infoset u2013 Create u2013 enter name of Infoset - Data source -- > Table join by basis table u2013 give name of table e.g pa0000 - Enter - Click on insert table if we want to include more tables u2013 give name of table one by one and after finishing, place cursor on the joining lines and right click to delete unwanted relationships - check - and go back - field groups - include all table fields - click on generate button - go out
    TC SQ03 - Select user group - eg. Payroll
    Infoset - Enter name of newly created Infoset
    Assign users and Infosets - Assign infosets - put tick on payroll - save and go back
    TC PAAH - Expand the nodes and put tick on relevant fields depending upon necessity
    Save the query by giving the same name as infoset for easyness..
    Thanks...
    Shambhu

  • Issue with Safety Upper limit for CALDAY Field for Generic Data Source

    Hi,
    I have given Upper limit as 1 for Calday field of one of the Generic Data Sources.
    I have got a doubt here.If today's load got failed and I will rerun the load next day.So Will that new run captures all 2 days records.
    Can any one advise me on this.
    Regards,
    K.Krishna.

    Hi,
    A one-day upper safety interval determines that an extraction run today, only fetches records up to yesterday (if the pointer has the day before yesterday date, the extraction comprises from the day before yesterday to yesterday).  This is meant to avoid missing records that were about to be persisted in the database when the delta extraction is running but whose date was determined in memory before the delta started.
    If pointer has today date value and you want to load data from today and yesterday, you should use a lower safety interval.  Take into account that this could reload data previously extracted.  Therefore, only InfoProviders with overwritting features (DataStores or InfoObject master data) should be used as targets of this extractions.
    You can find further details at:
    http://help.sap.com/saphelp_nw04/helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm
    I hope this helps you.
    Regards,
    Maximiliano

  • Generic data source with float field possible?

    Hello,
    when creating an generic data source using a view with a float field I get error R8359 (extract structure: You tried to generate an extract structure with the template structure .... This operation failed, because the template structure quantity fields or currency fields, for example, field ... refer to a different table.).
    I changed the data element from ATFLV to e.g. FLOAT but it did not help.
    SAP hint 335342 deals with this issue, but I just want to use the float number without the unit.
    Is this possible or do I need to write a function module?
    Best regards
    Thomas

    Hi,
    you could try to add the unit table and field to your view. When saving the datasource in RSO2, you can choose to hide these fields if you don't want them extracted into BW.
    Regards,
    Øystein

  • Delta Issue in Generic data source

    HI all ,
        I have a HR generic data source .which extracts only two records ffrom the source for so many days during delta.
       I checked in RSA3 .It shows 16000 records nearly. I did init without data transfer and then delta,still it picks onlys same 2 records .
       Delta setting in RSO2 is Numeric pointer with new status for changed records with field name as"cheque number"
       In BWdatasourceExtraction tab--Deltaprocess is AIE After Image by extractor.Iam not able to choose any other delta process type as it is built from R/3 .I think because of this process type.
    anybody faced the same problem ..  I tried many ways..  please guide me how to solve. this issue.

    HI Prashanth,
                        I checked RSA7 now and I found  the problem .In RSA7 the pointer for cheque number is 991749. The delta record created has cheque number 005409 which is lesser than the pointer ,thats why the record is not picking i guess.
           now ,If this is the case ,How can I give delta field.The generic datasource is built on only one table PAYR ,and having cheque number and other fields  as keys in the table PAYR.Date is not a key in the table. Please help how to proceed
    Thanks
    Rgds
    Pradeep

  • Generic Data Source with Function Module data mismatch in BI

    Hi All,
    I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
    when I run the InfoPackage in BI im Getting more no. of records than what i got executing the function module..
    and single record is divided into 2 records in BI side(not all the records), how can it be possible???
    is there anything Im missing to explain you my issue???
    if understood please help me out.
    Thanks n Regards,
    ravi.

    the datasource frame work starts the function module several times.
    1. the initialization
    2. the serval times, until you "raise no_more_data".
    check you coding: have you refreshed necessary internal tables.
    Sven

  • Generic Data Source with Function Module data mismatch

    Hi All,
    I'm using Generic Data Source with Function Module, When I execute the Function Module (Which I have Created), I'm getting 16000 records and when run extractor(in RSA3) im getting different no.of records(infact they are more no.).
    when I run the InfoPackage  in BI im Getting more no. of records than what i got executing the function module..
    and single record is divided into 2 records in BI side(not all the records), how can it be possible???
    is there anything Im missing to explain you my issue???
    if understood please help me out.
    Thanks n Regards,
    ravi.

    HI rkiranbi,
    1. FIrst you excute function module according to your paramers, you will get some records. then goto tcode RSA3 --> excute
    Provide your Data source name and under setting we have options like Data records/calls, Display extractor calls and selections --> fields .
    in that options you have to increase the values. and then you have to pass paramers in RSA3 according to your function module
    selections in SE37. Now you will get equal values in both functin module selection and RSA3 Selection. if it fail means  you need to
    check coding logic in function module. 
    2. if your  are getting wrong values in BI System then check with
                  1. compare with PSA data and data target data (here you need to check with characterstic as well as keyfigures)
                  if you find any mistake you need change the coding in function module according to client requirement.
                  2. compare data with RSA3 and bi report data or data target data.
                                 check it properly above steps, you will get solution.
    thanks and regards,
    malli

  • Generic Data Source with View

    Hi Experts.....
         previously i am creating one view based on VBRP & VBRK common field is VBELN but i have some confusion long days, these two tables having same data Source i.e..2LIS_13_VDHDR , why u create View. So please explain one real time sinario.

    Hi,
    When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
    Re: Extraction, Flat File, Generic Data Source, Delta Initialization
    Eg : If you want the information about the All Customers  across the regions in that case if i have the information
    Like 1)Table 1 has all the information  about  the Customer number But not having the Customer address and region and Pin code but same information has in other table
    table 2 : Customer no,Address, region and Pincode
    So since in Two tables i have common field Customer no is present hence if create view then i can get All the information in single in view then you can create Generic DS based on the then same you ca extract the data to BW.
    Regards,
    Satya

  • Problem with native SQL cursor in generic data source

    Hi, All!
    I am implementing generic data source based on FM.
    Because of complicated SQL I canu2019t use Open SQL and RSAX_BIW_GET_DATA_SIMPLE-example u201Cas isu201D.
    So, I have to use Native SQL. But Iu2019ve got a problem with a cursor. When I test my data source in RSA3, everything is Ok. But, if I start appropriate info-package, I get error u201CABAP/4 processor: DBIF_DSQL2_INVALID_CURSORu201D. It happens after selecting of 1st data package in line u201CFETCH NEXT S1 INTOu2026u201D. It seems to me that when system performs the second call of my FM the opened cursor has already been disappeared.
    Did anyone do things like this and what is incorrect?
    Is it real to make generic data source based on FM with using Native SQL open, fetch, closeu2026

    Hi Jason,
    I don't think this SQL is very valuable It is just an aggregation with some custom rules. This aggregation is performing on info-provider which consists of two info-cubes. Here we have about 2 billion records in info-provider and about 30 million records in custom db-table Z_TMP (certainly, it has indexes). I have to do this operation on 21 info-providers like this and I have to do this 20 times for each info-provider (with different values of host-variable p_GROUP)
    SELECT T.T1, SUM( T.T2 ), SUM( T.T3 ), SUM( T.T4 )
            FROM (
                    SELECT F."KEY_EVENT06088" AS T1,
                            F."/BIC/EV_COST" + F."/BIC/EV_A_COST" AS T2,
                            DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_COST") +
                              DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_A_COST") AS T3,
                            DECODE( D.SID_EVENTTYPE, 23147, F."/BIC/EV_DURAT",
                                                          23148, F."/BIC/EV_DURAT",
                                                          23151, F."/BIC/EV_DURAT",
                                                          23153, F."/BIC/EV_DURAT",
                                                          23157, F."/BIC/EV_DURAT",
                                                          23159, F."/BIC/EV_DURAT",
                                                          24896734, F."/BIC/EV_DURAT",
                                                          695032768, F."/BIC/EV_DURAT",
                                                          695029006, F."/BIC/EV_DURAT",
                                                          695029007, F."/BIC/EV_DURAT",
                                                          695036746, F."/BIC/EV_DURAT", 0) AS T4
                      FROM "/BIC/VEVENT0608F" F,
                           Z_TMP G,
                           "/BIC/DEVENT06085" D
                      WHERE F."KEY_EVENT06088" = G.ID
                            AND F."KEY_EVENT06085" = D.DIMID
                            AND G.GROUP_NO = :p_GROUP
                            AND ( F."/BIC/EV_COST" < 0 OR F."/BIC/EV_A_COST" < 0 )
                            AND D.SID_EVENTTYPE <> 695030676 AND D.SID_EVENTTYPE <> 695030678
                    UNION
                    SELECT F."KEY_EVNA06088" AS T1,
                            F."/BIC/EV_COST" + F."/BIC/EV_A_COST" AS T2,
                            DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_COST") +
                              DECODE( D.SID_EVENTTYPE, 23147, 0,
                                                          23148, 0,
                                                          23151, 0,
                                                          23153, 0,
                                                          23157, 0,
                                                          23159, 0,
                                                          24896734, 0,
                                                          695032768, 0,
                                                          695029006, 0,
                                                          695029007, 0,
                                                          695036746, 0, F."/BIC/EV_A_COST") AS T3,
                            DECODE( D.SID_EVENTTYPE, 23147, F."/BIC/EV_DURAT",
                                                          23148, F."/BIC/EV_DURAT",
                                                          23151, F."/BIC/EV_DURAT",
                                                          23153, F."/BIC/EV_DURAT",
                                                          23157, F."/BIC/EV_DURAT",
                                                          23159, F."/BIC/EV_DURAT",
                                                          24896734, F."/BIC/EV_DURAT",
                                                          695032768, F."/BIC/EV_DURAT",
                                                          695029006, F."/BIC/EV_DURAT",
                                                          695029007, F."/BIC/EV_DURAT",
                                                          695036746, F."/BIC/EV_DURAT", 0) AS T4
                    FROM "/BIC/VEVNA0608F" F,
                         Z_TMP G,
                         "/BIC/DEVNA06085" D
                    WHERE F."KEY_EVNA06088" = G.ID
                          AND F."KEY_EVNA06085" = D.DIMID
                          AND G.GROUP_NO = :p_GROUP
                          AND ( F."/BIC/EV_COST" < 0 OR F."/BIC/EV_A_COST" < 0 )
                          AND D.SID_EVENTTYPE <> 695030676 AND D.SID_EVENTTYPE <> 695030678
                 ) T
            GROUP BY T.T1

  • Trouble with generic data source

    Dear Gurus,
    I've created a generic data sources using tx. rso2, based on the view ZTV_CONFLO, that is created based on two tables: ZTB_CONFLO and MSEG, there comes the problem. My table ZTB_CONFLO has 500 registries, and I'm using MSEG table in my view just to avoid problem with units, anyway, when I check to see the registries in the view there are muy 500 entries multiplied by the number of entries in MSEG table.
    Please how can I solve this problem, it is urgent.
    Best regards,
    Pilar Infantas.

    Pilar,
      1. Create a View on table ZTB_CONFLO.
      2. Select all required fields except PESCA(wht ever key figures giving problem).
      3. Create a Datasource using View created in the above Step.
      4. Enahnce Datasource from RSA6 by selecting DS in RSA6(Append Datasource).
      5. System will propose one technical name. Accept the Name. Press Enter.Provide the Description for Structure.
      6. Provide the Quntity and Unit Fields.
    Fields Name ZZECSCA "Provide DataElement from MSEG for any Quantity field
    ZZMEINS                   MEINS
    7. Save and Activate the Structure.
    8. Create user Exit to poopulate the Data through User Exit.
    Please check forum for User exit coding Tips. Let me know if you have any Questions.
    all the best.
    Regards,
    Nagesh Ganisetti.
    Assign points if it helps.

Maybe you are looking for

  • Having a problem saving the graphics on a canvas.

    I'm having a problem saving graphics on a canvas. It draws on the canvas but when another window comes up the graphics disappear. I put in a method to take the graphics on the canvas and repaint it with the graphics. But this comes up blank. So I don

  • How can I link Apple TV (Gen1) to Time Capsule (Gen 4)?

    Everyone I am using a the above mentioned Time Capsule as privat WiFi Network for our devices at home (MacBook Pro, iPhones & iPads). The Time Capsule itself is connected to a DSL Modem by means of an ethernet cable. So far so good. Newly I have got

  • I Need to print a portion of a pdf file using a dos command. Can i ?

    Hello, I Need to print a portion of each page of a pdf file using a dos command without opening it. Can i do it ? if yes how ? Thanks in Advance for your help.

  • How to display the column headings in Script

    Hi Experts, I am getting the script output like as follows. 000001       aaaaaaa 000002       bbbbbbb but I want to maintain the column headings for these like Material      description 000001       aaaaaaa 000002       bbbbbbb Please tell me how to

  • How to know when a function is running in TRFC mode

    Hi, I have an RFC function and i would like the program to behave differently when called as a TRFC. The question is how to identify when it is being executed asynchronously rather than synchronously. Did I miss something obvious? Any suggestions?