Trinidad table/form too big in mobile page

I was trying to emulate the demo at [http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/ADFMobile/adfmobile.htm] using my own data. I can't seem to get trinidad tables/forms to fit as nicely as the demo does within a 240x320 screen at design time. I set the width to 100% with no success. What other property/template should I set?

Nevermind! Set the form font to be smaller and that helped.

Similar Messages

  • I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    I'm trying to open a 900kb Word doc (240pages) in Pages but get this error message:  Import Warning - A table was too big. Only the first 40 columns and 1,000 rows were imported.

    Julian,
    Pages simply won't support a table with that many rows. If you need that many, you must use another application.
    Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
    There are probably other ways, but that's what comes to mind here.
    Jerry

  • All columns of trinidad table are not coming up on page while its running

    Hi,
    I have put two trinidad tables on my page.But while the page is run, I am unable to see all the columns of the table.Only a few columns are visible.
    Also, though there are 5 rows in teh table ,there is a lot of gap below the tablespace.So the next table comes after a very big gap.
    How to solve the above two problems? Kindly let me know your valuable suggestions.
    Regards

    Hi santosh,
    Following is my code.I am providing only one column code(similarly there are 3 more columns),along with the table code.
    <tr:table value="#{phonebeannew.inputphone}" var="row"
    rows="#{bindings.phone.rangeSize}"
    inlineStyle="height:#{phonebeannew.rownumbers + 275}px"
    id="t1" width="100%">
    <tr:column sortProperty="phonetype" sortable="false"
    headerText="phonetype"
    id="c3" width="5px">
    <tr:inputText value="#{row.phonetype}"
    simple="true">
    I gave width as 5px but it doesnt make any difference in output.
    The 'phonebeannew' is our bean and inputphone is a property of it.input phone holds the array of values for the 4 columns.
    Kindly let me know if you want any further information which I can provide
    Regards

  • When you go into sites everything is too big for the pages,including home page

    everything is too big too see on screen

    Make sure that you do not run Firefox in compatibility mode.
    You can open the Properties of the Firefox desktop shortcut via the right-click context menu and check the "Compatibility" tab.
    Make sure that all items are deselected in the "Compatibility" tab of the Properties window.

  • RCD table getting too big

    Hello,
    Our rcd table is getting bigger (21 M records) and querying from that table takes up a lot of time.
    What is the recommended way to keep the size of that table within control?
    We can always create a materialized view to get a subset of that table so we can work with more recent records. However, this doesn't solve the problem of it getting bigger and bigger.
    Do you get it purged or archived somehow?
    Thanks
    Khanh

    Will do.
    Thank you Martin.
    Found this document on metalink:
    https://support.oracle.com/CSP/ui/flash.html#tab=KBHome(page=KBHome&id=()),(page=KBNavigator&id=(bmDocType=HOWTO&bmDocDsrc=DOCUMENT&bmDocTitle=Question%20on%20Switching%20to%20Noarchivelog%20Before%20Running%20Recon%20Archival%20Utility%20in%20OIM?&from=BOOKMARK&bmDocID=759373.1&viewingMode=1143))
    Question on Switching to Noarchivelog Before Running Recon Archival Utility in OIM? [ID 759373.1]
    Khanh
    Edited by: user12049102 on Dec 4, 2009 11:14 AM
    Edited by: user12049102 on Dec 4, 2009 11:18 AM

  • Cartesian product of three dimensions - fact table is too big

    Hi, I need some advice with OLAP design. I have tables with orders, customers and product types. My problem is that I want to know amount of orders for every combination of customer - date since customer was created - product type. I also need to filter
    days when no order was made and the opposite (by dimension). Also customer have some interval of time when he is considered as a new customer and I need to filter this customers too (again by dimension).
    Now I have got fact table filled with every combination of customer/product type/date and the number of orders with the bit flag - was a new customer. Problem is that I have aprox 100k customers, so this table has bilions of rows. Is there any other possible
    solution? For browsing cube is used Excel where I cannot easily filter by measure/calculation.

    It seems like every customer is a new customer at some point in time. So, you should probably store first order date in the customer table. Depending on the Date (Period) selected , a customer will become new, active or inactive. Also, create measures for
    new customer sales, old customer sales. i.e. First order date + 30 days of the customer is less than last date in the period selected, it is new customer sales.  I would assume that it would be difficult to do it in cube. Did you
    try to solve the problem using SQL queries?
    Good luck. 
    Customer
    First Ord Date
    New customer till
    Cust A
    3/1/2014
    4/1/2014
    New Cust Sales
    Old Cust Sales
    Total Sales (New + old) 
    2014-01
    2014-02
    2014-03
    10
    10
    2014-04
    20
    20
    2014-05

  • Everything is too big on the page ie. the whole page is not visible

    cannot view the whole page without scrolling to the right

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    *http://kb.mozillazine.org/Zoom_text_of_web_pages

  • The print is too big for the page, some of the article is cut off . Why?

    The printer was working fine. Suddenly that changed. Now when I print, the print is huge and a large part of the text is cut off. I tried reducing the size of the font but that did not help. This had happened to me before about a year ago and I tried different things with firefox and was finally able to fix it. However, this time I have tried all your troubleshooting tips and nothing works. The print function was working normally up to a couple of days ago and to the best of our knowledge neither my husband and I have made any changes to the settings.

    Firefox > Print -> Print Preview = what is the '''Scale''' set for?
    '''Shrink to Fit''' is usually the best setting for most web pages.

  • Numbers window too big

    For some reason everything I open a new numbers document session the spreadsheet is far to big for my screen and I need to reduce its size.
    Do you know why it is going this or how I can stop it?

    Unfortunately you still aren't being clear if it is a view issue or a table size issue.
    As the reply posts say, if the table is too big for your needs make it smaller and go to File>>save as newe template. Go to preferences and select the new template as the default.
    If the table has the right number of columns and rows but your screen isnt big enough use Yvan' solution.

  • PDF too big to email

    Hi i need to email mine but it's too big. 5 pages. How can i make it smaller? I tried making it a zip but it's still too big.

    Hi, Anne.
    I'm sorry that your files are too large.
    I see that you have a paid subscription to the CreatePDF service. Can you describe your workflow in a little more detail?
    It sounds like you may be converting a 5-page file to PDF using the CreatePDF service, yet your file is still too large. Is that correct? What file type are you converting to PDF? What's the size of the source file vs. the resulting PDF?
    Most file types automatically are compressed when you convert them to PDF. For example, PowerPoint files are typically compressed by 50% to 80%. The CreatePDF service cannot do any additional compression. However, Adobe Acrobat has advanced features to further reduce your PDF file size (by downsampling images, unembedding fonts, etc). A trial is of Adobe Acrobat is here.
    If you can provide a little more context, we may have some additional ideas.
    Dave

  • When I open my iPad the page is too big for the screen and won't shrink down. The keypad has also become very 'sticky'

    Recently when I open any apps the pages are too big for the screen. They shrink when pinched but immediately become bigger again. It's very difficult to scroll too. The keypad has become very sticky. Missing letters and spaces when I type and needing to tap the keys much harder than usual

    I have the exact same problem, I think.  I was on my iPad 3's home page swiping R-L to locate a certain icon when all of a sudden the screen appeared to get HUGE.  So big I could only see one or two icons.  I couldn't even turn it off to try a reboot because after I pushed the sleep/wake button, I couldn't find the red slide bar.  I finally just had to wait for the battery to die, then recharge it, and it looked normal again.  I also spoke with several friends who haven either iPads or iPhones, and they've all had this happen to them.  I checked my accessibility settings, and Zoom was already off.  So what is causing this problem for so many people, and what can we do to prevent it?  Please help.

  • I am using my first apple product, mac book pro.  somehow i FIGURED OUT HOW TO INCREASE THE FONT FOR SEARCHES AND WEB PAGES, BUT THE FONT IS TOO BIG AND FOR THE LIFE OF ME I CAN NOT FIND WHERE TO GET THE SCREEN BACK TO NORMAL, HELP ANYONE?

    I am new to Apple, somehow I figured out how to make font of Web pages bigger, but it is too big and I can't use sites properly.  for the life of me I can not how to get my font size reduced.  Help anyone? thank you, sbb

    Probably command-minus will do the trick.

  • Pages and icons (in the tabs and navigation bars) are too big due to 22 upgrade

    Due to FF22 upgrade (from 21), all my icons (from webpages, addons and regular buttons) and tabs have got bigger and that's really ugly because of the low resolution of the images. Also considering I have a rather big number of tabs I can just see a smaller number of them and it's annoying.
    The zoom of the page is now bigger (given that I has already zoom in in version 21, now the pages are too big and I have to zoom out a page that was correctly zoomed in 21)
    Surprisingly the menu bar is intact !
    Is that a new graphic convention ? Is there an update of something like GTK+ in this new version that could be responsible of this bug ? And mainly is there anyway to fix it ?
    My screen resolution is 1920*1080. And for example with chromium or FF21 the menu have the perfect size.
    PS: Sorry for my poor English.

    All these confusing explanations on how to fix something that never should have been changed. It just pisses me off that I now have to get used to inferior graphics because someone thought it would be cool to screw with settings people have obviously been using for who knows how long. I have tried simply zooming down and that doesn't work. I am not going to enter a bunch of techie gobbledeegook and screw up my whole internet experience. I am just PISSED!!!!
    How about another version to correct this? Hey, if someone wants to stay with this one, fine. At least give us people who aren't tech wizards an option to stick with what we have and what we have been happy with for years. Now, excuse me.. I need to get away from this.. I am so f***king pissed!!!
    30 minutes later: Okay, I went to about:config and a window came up .. pretty much telling me my computer would blow sky high and take me with it. I'm just an old lady who WAS passing my time browsing and playing a few games. Oops, I'm getting mad again. PS I NEVER talk like this, but this has ruined my whole fricken day.
    15 minutes later: I decided to give up. I went to play some monopoly at my favorite game site and the pop up window with the game board was unplayable. The board was way down the window and not complete. So, I went back and despite all the warnings went back to Version 21. I have used Firefox for years and have sworn by it and defended it and given it my best reviews. up until now. I absolutely don't want to quit FF, but I don't know all the tech stuff, I guess is required to change formats back to what you are used to. I still can't believe FF would make a drastic change across the board without warning or giving a choice. If I didn't know how to downgrade, I wouldn't be able to use my PC to help me get through each day. Why why why?

  • A document page opens that is too big for the display and runs off the end of the monitor

    How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I am making a book in iPhoto using a double page spread and blank layout. I can't find a way to minimize the picture. it is too big in all the themes. I seems like there must be a way to shrink it not just zoom to make it fit?

    I am making a book in iPhoto using a double page spread and blank layout. I can't find a way to minimize the picture. it is too big in all the themes. I seems like there must be a way to shrink it not just zoom to make it fit?

    Command (right) - click on the photo and select Fit to Frame in the contextual menu:
    Not all frames in a theme offer that feature but most do.  The spread layout doesn't.
    OT

Maybe you are looking for