Trip list fails in portal - "user not found" - powl_act_query is corrupt
Hi group,
For one user, the trip list in portal dumps. It dumps only for the tab/query with all trips.
The message is "User not found" in the dump. When we debug, we find that the table powl_act_query is corrupt.
For the query id in question, the key fields application and user are empty.
We corrected the error via POWL_D01. But can anyone explain how this could happen?
Best regards
Kirsten
Hi Kirsten
I did some checking on this error and found that it has happened on occasion that sometimes when users have their personalized queries saved in table POWL_ACT_QUERY, the names for these queries in table POWL_QUERY_T may be overwritten and subsequently the GUID is displayed on the tabstrips instead of the names.
The solution as you found to delete the personalized queries with POWL_D01 is unfortunately the only one I couild find to fix these queries and again show the delivered standard queries.
Unfortunately this is more of a MC-MUS-POW issue relating to personalisation rather than travel management but you could check in SCU3 if perhaps there were any authorization errors maybe?
This wiki link may also help
http://wiki.sdn.sap.com/wiki/display/WDABAP/POWL
Cheers
Sally
Edited by: Sally Redmond on Nov 5, 2011 10:02 AM
Similar Messages
-
Failed login- domain not found/plaintext user not found
We are using Portal Server 6.2 and Messaging Server 6.2.
We suddenly started to have problem with imap service. We did not make any configuration changes on the messaging server.
These are the errors from the imap log file. Http log file displays the same errors.
[24/Mar/2004:11:29:07 -0600] stargate imapd[9479]: Account Notice: [208.50.44.202:38079] domain not found
[24/Mar/2004:11:29:07 -0600] stargate imapd[9479]: Account Notice: badlogin: [208.50.44.202:38079] plaintext user not found
[24/Mar/2004:11:29:10 -0600] stargate imapd[9479]: Account Notice: close [208.50.44.202:38079] [unauthenticated] 2004/3/24
service.defaultdomain has a correct value. Adding uid to the alias list in amconsole did not make a difference.
KlaraYes, we did fresh/clean directory server installation. We use the SampleMailService that comes with the JES. We used DSAME to create the users.
As for the DNS changes, I am not able to provide the information but I will get it.
Here is the entry fro erohde:
# entry-id: 615
dn: uid=erohde,ou=People,o=colliercomputing.com,dc=colliercomputing,dc=com
sn: Rohde
cn: Eric Rohde
iplanet-am-modifiable-by: cn=Top-level Admin Role,dc=colliercomputing,dc=com
givenName: Eric
inetUserStatus: Active
uid: erohde
objectClass: sunportalnetmailperson
objectClass: top
objectClass: iplanet-am-managed-person
objectClass: person
objectClass: inetorgperson
objectClass: inetsubscriber
objectClass: iplanet-am-saml-service
objectClass: sunportalgatewayaccessservice
objectClass: sunportaldesktopperson
objectClass: sunportalnetfileservice
objectClass: userpresenceprofile
objectClass: icscalendaruser
objectClass: iplanet-am-user-service
objectClass: inetadmin
objectClass: organizationalperson
objectClass: inetuser
objectClass: iplanet-am-session-service
objectClass: sunssoadapterperson
objectClass: sunportalnetletservice
objectClass: inetlocalmailrecipient
objectClass: sunportalpksubscriptionsperson
objectClass: iplanetpreferences
objectClass: ipuser
objectClass: iplanet-am-auth-configuration-service
objectClass: inetmailuser
userPassword: {SSHA}HeGqtmsouTGejMJVyZNNOzThHFadUsxDvGPNcA==
creatorsName: cn=puser,ou=dsame users,dc=colliercomputing,dc=com
createTimestamp: 20040324163550Z
nsUniqueId: 2de38b01-7db111d8-808d8b55-c88b4d37
icsStatus: Active
mail: [email protected]
mailUserStatus: active
mailDeliveryOption: mailbox
mailHost: stargate.colliercomputing.com
sunSSOAdapterConfigurations: default|http:/?configName=notesCalendar&configDes
c=NOTES-CALENDAR
sunSSOAdapterConfigurations: default|undef:/?configName=sunOneAddressBook&conf
igDesc=SUN-ONE-ADDRESS-BOOK
sunSSOAdapterConfigurations: default|imap:/?configName=sunOneMail&configDesc=S
UN-ONE-MAIL&smtpPort=25
sunSSOAdapterConfigurations: default|imap:/?configName=exchangeMail&configDesc
=EXCHANGE-MAIL&smtpPort=25
sunSSOAdapterConfigurations: default|http:/?configName=exchangeCalendar&config
Desc=EXCHANGE-CALENDAR
sunSSOAdapterConfigurations: default|http:/?configName=sunOneCalendar&configDe
sc=SUN-ONE-CALENDAR
sunSSOAdapterConfigurations: default|pop3:/?configName=sunOneMailPop&configDes
c=SUN-ONE-MAIL-POP3&smtpPort=25
sunSSOAdapterConfigurations: default|undef://erohde:AQICLOvbi6m88H2HMVfRo3m1cA
%3D%[email protected]:143/?configName=sunOneMail_Mail&configD
esc=SUN-ONE-MAIL&clientPort=81&smtpPort=25&smtpServer=stargate.colliercomput
ing.com
sunSSOAdapterConfigurations: default|undef://erohde:AQICLOvbi6m88H2HMVfRo3m1cA
%3D%[email protected]:82/?configName=sunOneCalendar_Calendar&
configDesc=SUN-ONE-CALENDAR
sunSSOAdapterConfigurations: default|undef:/?configName=exchangeAddressBook&co
nfigDesc=EXCHANGE-ADDRESS-BOOK
sunSSOAdapterConfigurations: default|imap:/?configName=notesMail&configDesc=NO
TES-MAIL&smtpPort=25
sunSSOAdapterConfigurations: default|undef:/?configName=notesAddressBook&confi
gDesc=NOTES-ADDRESS-BOOK
sunPortalDesktopDpDocumentUser:: PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0idXRm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sunPortalDesktopDpLastModifiedUser: 1080147625352
icsCalendar: erohde
icsFirstDay: Monday
icsSubscribed: erohde$Eric Rohde
icsDWPHost: stargate.colliercomputing.com
icsCalendarOwned: erohde$Eric Rohde
modifiersName: cn=directory manager
modifyTimestamp: 20040324170027Z -
User not found error with Outlook Connector
Hi all
I am having some issues with the Outlook Connector (Version 7.1.222.4 JES2005Q4 running on Microsoft Outlook 2003) when trying to subscribe to a users calendar.
Details:
(SJES2005Q4)
Server 1 - Access Manager
Server 1 - Delegated Administrator
Server 2 - Directory Server 5.2
Server 3 - Messenger Server
Server 3 - Calendar Server
Server 3 - Access Manager SDK
Server 3 - Communications Express
Server 3 - Messenger Express
My setup works fine, I can subscribe to users calendars in Communications Express and modify/delete etc; however, when I try to subscribe to this same users calendar in Outlook I get the following error:
"User not found. Either enter the email id of the user OR click on Search and then click on Find to locate the user."
If I click on search, I get a list of my corporate directory, here I am able to select the user but again clicking ok gives the same result.
Looking at the logs it seems that the search at the point where I click ok is missing the "organizational unit" element of the user DN, logs below:
WHEN INITIATING SEARCH (not enterng userid; instead clicking on SEARCH in the ADD CALENDAR BOX)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=-1 msgId=-1 - fd=175 slot=175 LDAP connection from 172.16.7.132 to 192.168.170.97
[14/Feb/2006:11:23:06 +0000] conn=20255 op=0 msgId=1 - BIND dn="uid=me,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" method=128 version=3
[14/Feb/2006:11:23:06 +0000] conn=20255 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn="uid=me,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - SRCH base="ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(&(mail=*)(cn=*))" attrs="cn mail uid objectClass"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - SORT cn (5)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - VLV 1:1:1:0 2:5 (0)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=1 msgId=2 - RESULT err=0 tag=101 nentries=3 etime=0 notes=U
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - SRCH base="ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(&(mail=*)(cn=*))" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - SORT cn (5)
[14/Feb/2006:11:23:06 +0000] conn=20255 op=2 msgId=3 - VLV 0:4:0:0 1:5 (0)
[14/Feb/2006:11:23:07 +0000] conn=20255 op=2 msgId=3 - RESULT err=0 tag=101 nentries=5 etime=1 notes=U
NOW SELECTING USERID
[14/Feb/2006:11:23:50 +0000] conn=20255 op=3 msgId=4 - SRCH base="uid=testmail,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=0 filter="(&(mail=*)(cn=*))" attrs="cn displayName givenName sn initials uid departmentNumber title homePhone mail manager mobile company pager secretary description facsimileTelephoneNumber l physicalDeliveryOfficeName postalCode st street c telephoneNumber mailAlternateAddress objectClass"
[14/Feb/2006:11:23:50 +0000] conn=20255 op=3 msgId=4 - RESULT err=0 tag=101 nentries=1 etime=0
PRESSING OK (WITH USER ID SELECTED)
[14/Feb/2006:11:24:20 +0000] conn=20256 op=-1 msgId=-1 - fd=225 slot=225 LDAP connection from 192.168.170.99 to 192.168.170.97
[14/Feb/2006:11:24:20 +0000] conn=20256 op=0 msgId=1 - BIND dn="" method=128 version=2
[14/Feb/2006:11:24:20 +0000] conn=20256 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[14/Feb/2006:11:24:20 +0000] conn=20256 op=1 msgId=2 - SRCH base="o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(uid=testmail)" attrs="cn uid mail givenName sn icsCalendar"
[14/Feb/2006:11:24:20 +0000] conn=20256 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[14/Feb/2006:11:24:20 +0000] conn=20256 op=2 msgId=3 - UNBIND
[14/Feb/2006:11:24:20 +0000] conn=20256 op=2 msgId=-1 - closing - U1
[14/Feb/2006:11:24:21 +0000] conn=20256 op=-1 msgId=-1 - closed.
NOW WHEN ENTERING USER ID DIRECTLY (that is NOT clicking on SEARCH in the ADD CALENDAR BOX)
[14/Feb/2006:11:25:16 +0000] conn=20257 op=-1 msgId=-1 - fd=225 slot=225 LDAP connection from 192.168.170.99 to 192.168.170.97
[14/Feb/2006:11:25:16 +0000] conn=20257 op=0 msgId=1 - BIND dn="" method=128 version=2
[14/Feb/2006:11:25:16 +0000] conn=20257 op=0 msgId=1 - RESULT err=0 tag=97 nentries=0 etime=0 dn=""
[14/Feb/2006:11:25:16 +0000] conn=20257 op=1 msgId=2 - SRCH base="o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk" scope=2 filter="(uid=testmail)" attrs="cn uid mail givenName sn icsCalendar"
[14/Feb/2006:11:25:16 +0000] conn=20257 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
[14/Feb/2006:11:25:16 +0000] conn=20257 op=2 msgId=3 - UNBIND
[14/Feb/2006:11:25:16 +0000] conn=20257 op=2 msgId=-1 - closing - U1
[14/Feb/2006:11:25:16 +0000] conn=20257 op=-1 msgId=-1 - closed.
OUTLOOK CONNECTOR LOGS
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Error ]: wc /get_userprefs.wcap?userid=testmail&id=bo3bn0u68x8sb5rb&fmt-out=text%2Fcalendar
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Error ]: wcap returned errno: 61
02/14/2006 11:25:16.223 (0x0e34) {Addin } [Warning]: LookUpUser getUserPropertiesByEmailID failed : Denied Access
Initially I thought that it maybe something to do with ACI but then the search parameters are not correct at the point of clicking ok.
My Outlook Connector deployment configuration for the "LDAP" tab is as follows:
Search base (root of LDAP directory): ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
VLV Search filter: (&(mail=*)(cn=*))
Advanced search filter: (cn=%s*),(givenName=%s*),(sn=%s*),(title=%s*),(uid=%s*),(company=%s*),(departmentNumber=%s*),(physicalDeliveryOfficeName=%s*),(l=*%s*)
Name resolution filter: (&(mail=*)(|(mail=%s*)(|(cn=%s*)(|(sn=%s*)(givenName=%s*)))))
VLV sort attribute: cn
Search timeout after: 1minute
Maximum number of search results returned: 10
Require authentification (See Help for LDAP syntax examples): (User DN pattern) uid=%S,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
Retrieve user settings from LDAP (User DN pattern): uid=%S,ou=people,o=domain-dev.co.uk,dc=domain-dev,dc=co,dc=uk
Does anyone have any ideas?
Thanks
PS: This is also posted in the IMS mailing list, so apologises for duplication to people who visit both forums.The error was fixed by setting the "Authenticated proxy binding: service.wcap.userprefs.ldapproxyauth" to "yes", this is in the release notes as pointed out by Arnaud Quillaud.
Link: http://docs.sun.com/app/docs/doc/819-5200/6n7a49o0b?a=view -
Starting yesterday (I believe) we are suddenly receiving a "User not found" error when trying to view a user's profile page when clicking on their name (in search or elsewhere) via the url
https://www.contoso.org/Person.aspx?accountname=contoso%255Cmyuserlogin
This is happening for all users. (but profiles exist and seem ok, and sync with AD is running fine) When looking in the logs I see the error (full ULS log is later below)
Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database.
The only clue of what MAY be going on is just before that I see the following two lines which came up after I changed the Database logging to Verbose:
ConnectionString: 'Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][UPAPROFILEDB]' Partition:
NULL ConnectionState: Closed ConnectionTimeout: 15
SQL connection time: 0.0456 for Data Source=INSTANCE;Initial Catalog=UPAPROFILEDB;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]
If I am reading that correctly, does it mean the connection to the database is timing out instantly? I am able to use powershell to pull up profiles and print them to the screen while on the webservers. And it's only the one specific page that is not
working.
What sort of tests or further debugging can I do for the error above?
We are on premise, SharePoint 2013 sp1, sql2012, server 2012, claims using the full SharePoint Profiile Sychronization against AD. Farm has been running since last august. Last week the admin team did run windows update on all servers, I can't be sure
if it was broken for 5 days and no one noticed or if it broke yesterday.
I already did the following:
Verified the profiles do exist in central admin.
I can still access their personal sites directly via
https://www.contoso.org/personal/myuserlogin
I checked the ProfileDB database and made sure the service accounts for the UPA has dbowner, so does the farm account, and the web application pool has SPDataAccess.
Verified the AD sync account has proper rights in AD.
I reran a full synchronization which ran with no errors.
File systems on the webservers and appserver have plenty of free space.
Rebooted every server in farm
I even checked the bin directory of the mysite webapplication, (since once I had a weird problem where access to bin was removed.) WSS_ADMIN_WPG, WSS_RESTRICTED_WPG_W4 have full control and WSS_WPG,IIS_IUSRS all have read and execute.
I opened powershell on the webserver I can indeed load profiles and print their values.
Timestamp Area Category EventID Level Message Correlation
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.43 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.43 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=1.3859 be11a89c-fbe8-a08d-57d2-afa6a4948743
07/25/2014 14:11:08.47 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Parent No
07/25/2014 14:11:08.47 SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.49 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|fa\cbuchholz, ClaimsCount=167 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files ak8dj High UserAgent not available, file operations may not be optimized. at Microsoft.SharePoint.SPFileStreamManager.CreateCobaltStreamContainer(SPFileStreamStore spfs, ILockBytes ilb, Boolean copyOnFirstWrite, Boolean disposeIlb) at Microsoft.SharePoint.SPFileStreamManager.SetInputLockBytes(SPFileInfo& fileInfo, SqlSession session, PrefetchResult prefetchResult) at Microsoft.SharePoint.CoordinatedStreamBuffer.SPCoordinatedStreamBufferFactory.CreateFromDocumentRowset(Guid databaseId, SqlSession session, SPFileStreamManager spfstm, Object[] metadataRow, SPRowset contentRowset, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres) at Microsoft.SharePoint.SPSqlClient.GetDocumentContentRow(Int32 rowOrd, Object ospFileStmMgr, SPDocumentBindRequest& dbreq, SPDocumentBindResults& dbres... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequestInternalClass.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion, String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbst... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...rRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.Library.SPRequest.GetFileAndMetaInfo(String bstrUrl, Byte bPageView, Byte bPageMode, Byte bGetBuildDependencySet, String bstrCurrentFolderUrl, Int32 iRequestVersion, Byte bMainFileRequest, Boolean& pbCanCustomizePages, Boolean& pbCanPersonalizeWebParts, Boolean& pbCanAddDeleteWebParts, Boolean& pbGhostedDocument, Boolean& pbDefaultToPersonal, Boolean& pbIsWebWelcomePage, String& pbstrSiteRoot, Guid& pgSiteId, UInt32& pdwVersion,... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ... String& pbstrTimeLastModified, String& pbstrContent, UInt32& pdwPartCount, Object& pvarMetaData, Object& pvarMultipleMeetingDoclibRootFolders, String& pbstrRedirectUrl, Boolean& pbObjectIsList, Guid& pgListId, UInt32& pdwItemId, Int64& pllListFlags, Boolean& pbAccessDenied, Guid& pgDocid, Byte& piLevel, UInt64& ppermMask, Object& pvarBuildDependencySet, UInt32& pdwNumBuildDependencies, Object& pvarBuildDependencies, String& pbstrFolderUrl, String& pbstrContentTypeOrder, Guid& pgDocScopeId) at Microsoft.SharePoint.SPWeb.GetWebPartPageContent(Uri pageUrl, Int32 pageVersion, PageView requestedView, HttpContext context, Boolean forRender, Boolean includeHidden, Boolean mainFileRequest, Boolean fetchDependencyInformation, Boolean& ghostedPage, String& siteRoot, Guid& siteId, Int64& bytes, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...Guid& docId, UInt32& docVersion, String& timeLastModified, Byte& level, Object& buildDependencySetData, UInt32& dependencyCount, Object& buildDependencies, SPWebPartCollectionInitialState& initialState, Object& oMultipleMeetingDoclibRootFolders, String& redirectUrl, Boolean& ObjectIsList, Guid& listId) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.FetchWebPartPageInformationForInit(HttpContext context, SPWeb spweb, Boolean mainFileRequest, String path, Boolean impersonate, Boolean& isAppWeb, Boolean& fGhostedPage, Guid& docId, UInt32& docVersion, String& timeLastModified, SPFileLevel& spLevel, String& masterPageUrl, String& customMasterPageUrl, String& webUrl, String& siteUrl, Guid& siteId, Object& buildDependencySetData, SPWebPartCollectionInitialState& initialState, ... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...String& siteRoot, String& redirectUrl, Object& oMultipleMeetingDoclibRootFolders, Boolean& objectIsList, Guid& listId, Int64& bytes) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModuleData.GetFileForRequest(HttpContext context, SPWeb web, Boolean exclusion, String virtualPath) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.InitContextWeb(HttpContext context, SPWeb web) at Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.GetContextWeb(HttpContext context) at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IEx... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...ecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) at System.Web.HttpApplication.PipelineStepManager.ResumeSteps(Exception error) at System.Web.HttpApplication.BeginProcessRequestNotification(HttpContext context, AsyncCallback cb) at System.Web.HttpRuntime.ProcessRequestNotificationPrivate(IIS7WorkerRequest wr, HttpContext context) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompl... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50* SharePoint Foundation Files ak8dj High ...etion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.UnsafeIISMethods.MgdIndicateCompletion(IntPtr pHandler, RequestNotificationStatus& notificationStatus) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotificationHelper(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) at System.Web.Hosting.PipelineRuntime.ProcessRequestNotification(IntPtr rootedObjectsPointer, IntPtr nativeRequestContext, IntPtr moduleData, Int32 flags) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Files aiv4w Medium Spent 0 ms to bind 4224 byte file stream be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Logging Correlation Data xmnv Medium Site=/ be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.50 SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=11.7341 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.52 SharePoint Portal Server User Profiles aj2az Verbose GetPartitionPropertiesCache :: Getting Cached object be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2aw Verbose GetPartitionPropertiesCache :: ApplicationId = c604ddac-b9f9-4661-b31f-44cdcf2b78dc be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ax Verbose GetPartitionPropertiesCache :: Trying to find existing cache be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Portal Server User Profiles aj2ay Verbose GetPartitionPropertiesCache :: Found existing cache in httpcontext be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0583 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://www.hungernet.org/. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.54 SharePoint Foundation General adyrv High Cannot find site lookup info for request Uri http://lnkd.in/bb6rsHj. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database tzku Verbose ConnectionString: 'Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile]' Partition: NULL ConnectionState: Closed ConnectionTimeout: 15 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Server Database ahjqp Verbose SQL connection time: 0.0456 for Data Source=HungerNet3;Initial Catalog=HNet3_Svc_Prod_UPA_Profile;Integrated Security=True;Enlist=False;Pooling=True;Min Pool Size=0;Max Pool Size=100;Connect Timeout=15;Application Name=SharePoint[w3wp][3][HNet3_Svc_Prod_UPA_Profile] be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Portal Server User Profiles ajw8l High Exception in LoadRequestedUserProfile: (Microsoft.Office.Server.UserProfiles.UserNotFoundException: User Not Found: Could not load profile data from the database. at Microsoft.Office.Server.UserProfiles.UserProfile.Load(SqlDataReader myReader, Boolean bFirstRead, Boolean firstReaderIsViewerRights, Boolean includeColleagueRecords, Boolean includeLanguageAndRegionalSettings, Boolean shouldCloseReader) at Microsoft.Office.Server.UserProfiles.UserProfile.RetrieveUser(String strAcct, Guid gAcct, Byte[] bSid, Nullable`1 recordId, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAcct, Boolean doNotResolveToMasterAccount, Boole... be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55* SharePoint Portal Server User Profiles ajw8l High ...an forceUserIsSelf, Boolean loadFullProfile, Boolean loadColleagueRecordIds, String strEmail) at Microsoft.Office.Server.UserProfiles.UserProfileManager.GetUserProfile(String strAccountName, Boolean doNotResolveToMasterAccount, Boolean loadFullProfile, Boolean loadColleagueRecordIds) at Microsoft.SharePoint.Portal.WebControls.ProfilePropertyLoader.LoadRequestedUserProfile(String& redirectionUrl)) be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General aat87 Monitorable be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Micro Trace uls4 Medium Micro Trace Tags: 0 nasq,20 ajji6,3 agb9s,10 ak8dj,1 b4ly,25 adyrv,1 adyrv,4 adyrv,3 ajw8l,1 aat87,3 ajji6 be11a89c-ebeb-a08d-57d2-a513d117e184
07/25/2014 14:11:08.55 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:https://my.hungernet.org:443/Person.aspx?accountname=FA%255Ccbuchholz)). Execution Time=78.9958 be11a89c-ebeb-a08d-57d2-a513d117e184Have Windows Updates been applied? See my note about this
https://twitter.com/imorrish/status/491020435039854592
Look at the URL in the search results. It may have invalid character in which case you can use this fix
http://blogs.msdn.com/b/spses/archive/2014/06/30/sharepoint-2013-the-search-results-with-5c-the-character-will-become-double-encoded-and-causes-broken-links.aspx
Regards,
Ian
http://sps.cloudapp.net
Regards, Ian Internet Sites running on SharePoint 2013 http://j.mp/sp2013sites -
Viewing form in Preview Mode Failed. Error: Table not found [131-183]
Hi,
I have created a user form in screen painter in SBODemo. Created UDT, UDF & Registered UDO through my SDK code.
Everything works fine.
But when i run my addon on any other DB, and open my custom form it gives an error : Table Not Found.
I have checked the UDT's , UDF's & my UDO, all are in place and getting created in the DB.
I tried checking the Form again in screen painter everything is in line. But when i try preview in screen painter it gives an error
Viewing form in Preview Mode Failed. Error: Table not found [131-183].
I can't figure out the issue, i have checked my codes & forms many times.
Regards
Johnhi john smith,
Check your screen painter, probably some fields are defined without the "@" character in front.
for fields, check the "U_".
nd.Q -
SharePoint 2010. We've migrated domains, one user that was no longer with the company was not migrated to the new domain and was deleted. She had created several subsites that we are no longer able to access, the user not found message.
How can I fix this to access these subsites? The old domain is no longer live
David Scottthe information technology site the deleted user would have had nothing to do with so she must not be the problem.
I get this exact same message on both sites:
User cannot be found.
Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code.
Exception Details:
Microsoft.SharePoint.SPException: User cannot be found.
Source
Error:
An unhandled exception was generated during the execution of the
current web request. Information regarding the origin and location of the
exception can be identified using the exception stack trace below.
Stack Trace:
[SPException: User cannot be found.]
Microsoft.SharePoint.SPUserCollection.GetByID(Int32 id) +27292484
Microsoft.SharePoint.Portal.WebControls.CategoryDetail.GetAreaData() +628
Microsoft.SharePoint.Portal.WebControls.CategoryDetail.RenderWebPart(HtmlTextWriter HtwWriter) +264
Microsoft.SharePoint.WebPartPages.WebPart.Render(HtmlTextWriter writer) +155
Microsoft.SharePoint.WebPartPages.SPChrome.RenderPartContents(HtmlTextWriter output, WebPart part) +43
[WebPartException: User cannot be found.]
Microsoft.SharePoint.WebPartPages.SPChrome.RenderPartContents(HtmlTextWriter output, WebPart part) +19801990
Microsoft.SharePoint.WebPartPages.SPChrome.RenderWebPart(HtmlTextWriter output, WebPart part) +64
Microsoft.SharePoint.WebPartPages.WebPartZone.RenderZoneCell(HtmlTextWriter output, Boolean bMoreParts, WebPart part) +1997
Microsoft.SharePoint.WebPartPages.WebPartZone.RenderWebParts(HtmlTextWriter output, ArrayList webParts) +508
Microsoft.SharePoint.WebPartPages.WebPartZone.Render(HtmlTextWriter output) +1000
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253
System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87
System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240
System.Web.UI.Page.Render(HtmlTextWriter writer) +38
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240
David Scott -
Tutorial that worked now complains "user not found"
Hi, again.
Sorry for another "newbie" problem, but the tutorial database that was
running last night (thank you, Marc and Stephen) now gives the following
error at "Run":
891 INFO [main] kodo.jdbc.JDBC - Using dictionary class
"kodo.jdbc.sql.HSQLDictionary".
1344 INFO [main] kodo.MetaData - Parsing metadata resource
"file:/C:/MBower/MyDocuments/src/eclipse_workspace/PetShop/Animal.mapping".
kodo.util.DataStoreException: User not found: SA
at
kodo.jdbc.sql.DBDictionary.newDataStoreException(DBDictionary.java:3084)
at
kodo.jdbc.sql.HSQLDictionary.newDataStoreException(HSQLDictionary.java:188)
at kodo.jdbc.sql.SQLExceptions.getDataStore(SQLExceptions.java:77)
at kodo.jdbc.sql.SQLExceptions.getDataStore(SQLExceptions.java:63)
at kodo.jdbc.sql.SQLExceptions.getDataStore(SQLExceptions.java:43)
at
kodo.jdbc.schema.LazySchemaFactory.findTable(LazySchemaFactory.java:159)
at
kodo.jdbc.meta.BaseClassMapping.fromMappingInfo(BaseClassMapping.java:168)
at
kodo.jdbc.meta.RuntimeMappingProvider.getMapping(RuntimeMappingProvider.java:59)
at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:393)
at kodo.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:348)
at
kodo.jdbc.meta.MappingRepository.getMappings(MappingRepository.java:294)
at
kodo.jdbc.meta.MappingRepository.getMetaDatas(MappingRepository.java:271)
at kodo.runtime.ExtentImpl.iterator(ExtentImpl.java:109)
at PetShop.<init>(PetShop.java:46)
at PetShop.main(PetShop.java:179)
NestedThrowablesStackTrace:
java.sql.SQLException: User not found: SA
at org.hsqldb.Trace.getError(Trace.java:226)
at org.hsqldb.Trace.error(Trace.java:290)
at org.hsqldb.UserManager.get(UserManager.java:309)
at org.hsqldb.UserManager.getUser(UserManager.java:250)
at org.hsqldb.Database.connect(Database.java:278)
at org.hsqldb.jdbcConnection.openStandalone(jdbcConnection.java:2860)
at org.hsqldb.jdbcConnection.<init>(jdbcConnection.java:2428)
at org.hsqldb.jdbcDriver.connect(jdbcDriver.java:176)
at
com.solarmetric.jdbc.PoolingDataSource.newConnection(PoolingDataSource.java:348)
at
com.solarmetric.jdbc.ConnectionPoolImpl.makeConnection(ConnectionPoolImpl.java:392)
at
com.solarmetric.jdbc.ConnectionPoolImpl.getConnection(ConnectionPoolImpl.java:242)
at
com.solarmetric.jdbc.PoolingDataSource.getConnection(PoolingDataSource.java:257)
at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:131)
at
com.solarmetric.jdbc.DecoratingDataSource.getConnection(DecoratingDataSource.java:81)
at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:131)
at
kodo.jdbc.schema.DataSourceFactory$DefaultsDataSource.getConnection(DataSourceFactory.java:329)
at
kodo.jdbc.schema.LazySchemaFactory.findTable(LazySchemaFactory.java:129)
at
kodo.jdbc.meta.BaseClassMapping.fromMappingInfo(BaseClassMapping.java:168)
at
kodo.jdbc.meta.RuntimeMappingProvider.getMapping(RuntimeMappingProvider.java:59)
at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:393)
at kodo.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:348)
at
kodo.jdbc.meta.MappingRepository.getMappings(MappingRepository.java:294)
at
kodo.jdbc.meta.MappingRepository.getMetaDatas(MappingRepository.java:271)
at kodo.runtime.ExtentImpl.iterator(ExtentImpl.java:109)
at PetShop.<init>(PetShop.java:46)
at PetShop.main(PetShop.java:179)
Did running the program last night change something that prevents it from
running now? Is there something different that needs to be done to get a
running program to run subsequently?
MarkHi, Patrick.
Thank you for your help! I deleted the database files, ran the mapping
tool, and the tutorial ran. Great! Then, I added an animal and a price,
hit "Create" and saw that my input was added to the list. I then exited
the application (by hitting the "X" in the upper right) and tried to run
the tutorial again; I wanted to see that the data I had entered would load
up. I got the same error as before:
906 INFO [main] kodo.jdbc.JDBC - Using dictionary class
"kodo.jdbc.sql.HSQLDictionary".
1359 INFO [main] kodo.MetaData - Parsing metadata resource
"file:/C:/MBower/MyDocuments/src/eclipse_workspace/PetShop/Animal.mapping".
kodo.util.DataStoreException: User not found: SA
at
kodo.jdbc.sql.DBDictionary.newDataStoreException(DBDictionary.java:3084)
at
kodo.jdbc.sql.HSQLDictionary.newDataStoreException(HSQLDictionary.java:188)
at kodo.jdbc.sql.SQLExceptions.getDataStore(SQLExceptions.java:77)
at kodo.jdbc.sql.SQLExceptions.getDataStore(SQLExceptions.java:63)
at kodo.jdbc.sql.SQLExceptions.getDataStore(SQLExceptions.java:43)
at
kodo.jdbc.schema.LazySchemaFactory.findTable(LazySchemaFactory.java:159)
at
kodo.jdbc.meta.BaseClassMapping.fromMappingInfo(BaseClassMapping.java:168)
at
kodo.jdbc.meta.RuntimeMappingProvider.getMapping(RuntimeMappingProvider.java:59)
at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:393)
at kodo.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:348)
at
kodo.jdbc.meta.MappingRepository.getMappings(MappingRepository.java:294)
at
kodo.jdbc.meta.MappingRepository.getMetaDatas(MappingRepository.java:271)
at kodo.runtime.ExtentImpl.iterator(ExtentImpl.java:109)
at PetShop.<init>(PetShop.java:46)
at PetShop.main(PetShop.java:179)
NestedThrowablesStackTrace:
java.sql.SQLException: User not found: SA
at org.hsqldb.Trace.getError(Trace.java:226)
at org.hsqldb.Trace.error(Trace.java:290)
at org.hsqldb.UserManager.get(UserManager.java:309)
at org.hsqldb.UserManager.getUser(UserManager.java:250)
at org.hsqldb.Database.connect(Database.java:278)
at org.hsqldb.jdbcConnection.openStandalone(jdbcConnection.java:2860)
at org.hsqldb.jdbcConnection.<init>(jdbcConnection.java:2428)
at org.hsqldb.jdbcDriver.connect(jdbcDriver.java:176)
at
com.solarmetric.jdbc.PoolingDataSource.newConnection(PoolingDataSource.java:348)
at
com.solarmetric.jdbc.ConnectionPoolImpl.makeConnection(ConnectionPoolImpl.java:392)
at
com.solarmetric.jdbc.ConnectionPoolImpl.getConnection(ConnectionPoolImpl.java:242)
at
com.solarmetric.jdbc.PoolingDataSource.getConnection(PoolingDataSource.java:257)
at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:131)
at
com.solarmetric.jdbc.DecoratingDataSource.getConnection(DecoratingDataSource.java:81)
at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:131)
at
kodo.jdbc.schema.DataSourceFactory$DefaultsDataSource.getConnection(DataSourceFactory.java:329)
at
kodo.jdbc.schema.LazySchemaFactory.findTable(LazySchemaFactory.java:129)
at
kodo.jdbc.meta.BaseClassMapping.fromMappingInfo(BaseClassMapping.java:168)
at
kodo.jdbc.meta.RuntimeMappingProvider.getMapping(RuntimeMappingProvider.java:59)
at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:393)
at kodo.jdbc.meta.MappingRepository.getMapping(MappingRepository.java:348)
at
kodo.jdbc.meta.MappingRepository.getMappings(MappingRepository.java:294)
at
kodo.jdbc.meta.MappingRepository.getMetaDatas(MappingRepository.java:271)
at kodo.runtime.ExtentImpl.iterator(ExtentImpl.java:109)
at PetShop.<init>(PetShop.java:46)
at PetShop.main(PetShop.java:179)
If I try to run the Mapping Tool on "Animal.jdo", again (I'm just guessing
here that I need to point things in the correct direction), I get an error:
<error>-An error occurred running MappingTool
kodo.util.DataStoreException: The database is already in use by another
process
<info>-Done.
Thank you, again, for any assistance! I have no doubt that this problem
is unique to my setup, so I doubt that much learned here will be of use to
others. Sorry,
Mark
Patrick Linskey wrote:
Mark Bower wrote:
Did running the program last night change something that prevents it from
running now? Is there something different that needs to be done to get a
running program to run subsequently?
Are you maybe in a different directory than you were in when you ran the
tutorial before? HSQL is a file-based database; the default
configurations for the tutorial list relative paths for the files that
it uses.
Also, maybe one of the files exists, but its contents were deleted?
I'd suggest removing the tutorial database files, and running
mappingtool again to get to a clean state.
-Patrick -
ISE upgrade failing with "% Manifest file not found in the bundle"
Hello
I am trying to upgrade a brand new ISE 3395 from 1.0.3.337 to 1.0.4 (latest). It keeps failing with
% Manifest file not found in the bundle
Here is the output:
company-ise-01/admin# application upgrade ise-appbundle-1.0.4.573.i386.tar.gpg ftp
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
fusd-ise-01/admin# sh application version ise
Cisco Identity Services Engine
Version : 1.0.3.377
Build Date : Fri May 6 19:30:37 2011
Install Date : Wed Oct 12 22:18:26 2011
I can't find anything about this for ISE, although there are a lot of topics for the same error for ACS. Thanks in advance.
SaroSame problem with 1.1.2 and 1.1.1 patch 5:
ISEcdemo/admin# sh ver
Cisco Application Deployment Engine OS Release: 2.0
ADE-OS Build Version: 2.0.4.018
ADE-OS System Architecture: i386
Copyright (c) 2005-2011 by Cisco Systems, Inc.
All rights reserved.
Hostname: ISEcdemo
Version information of installed applications
Cisco Identity Services Engine
Version : 1.1.1.268
Build Date : Mon Jun 25 05:49:23 2012
Install Date : Wed Sep 12 09:12:53 2012
Cisco Identity Services Engine Patch
Version : 1
Install Date : Wed Sep 12 10:01:22 2012
Cisco Identity Services Engine Patch
Version : 2
Install Date : Wed Sep 12 13:10:36 2012
Cisco Identity Services Engine Patch
Version : 3
Install Date : Tue Nov 27 12:33:19 2012
Cisco Identity Services Engine Patch
Version : 4
Install Date : Tue Nov 27 12:52:50 2012
ISEcdemo/admin# patch install ise-patchbundle-1.1.1.268-5-68046.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Patch installation...
% Manifest file not found in the bundle
ISEcdemo/admin#
ISEcdemo/admin# application upgrade ise-appbundle-1.1.2.145.i386.tar.gz my2
Save the current ADE-OS running configuration? (yes/no) [yes] ? yes
Generating configuration...
Saved the ADE-OS running configuration to startup successfully
Initiating Application Upgrade...
% Manifest file not found in the bundle
Can someone verify the downloaded file details? They are different from cisco.com values:
-bash-4.1$ /usr/bin/md5sum.exe /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
2aa9b75ef5d7c1662a1a51844f178b77 */cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-bash-4.1$ /usr/bin/ls -lAp /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz
-rwx------+ 1 Administrators Domain Users 1583851520 Nov 29 00:14 /cygdrive/c/munka-unenc/tftp/ise-appbundle-1.1.2.145.i386.tar.gz -
Creation of new Portal Apps!!portal.wf not found !!!
Hi ,
In EBCC I am creating a new portal web application in the existing Portal
Application. I am assigning default portal webflow to my new Portal.
After synchronization , if I access the portal by its context root it
says, portal.wf not found..
What is the significance of portal-project directory ?
regards
vedant.We found the problem,
We had to add a numeric and /or a special charachter in the password -
User Not Found When Attempting to Sign In To FusionHQ
Hello Firefox Tech Support,
When I initialized Firefox in order to sign into my Fusionhq software, first, there was the Prompt from Firefox inquiring as to whether I can trust the Fusionhq site. Then, after responding Yes, I can vaguely recall some things about my signing in being an Exception in this case, and I believe that I responded Yes, when I should have responded No, wherein I was taken back to the Fusionhq Sign-In Screen. Upon attempting to sign in at the new Fusionhq Sign-In Screen, I then got the “User Not Found” message. For good measure, there might have been an additional Prompt before I got to the Exception Question.
Can you please have my original sign in reset, in order that I can go back to Firefox to sign into Fusionhq anew ? Once done, I can go back through the sign in process and then follow a different route for the Prompts.
Thanks.
JohnMy problem is now resolved.
Thanks. -
Exchange 2007: user not found
Hi all,
I have a very strange problem..... I've been using Sun IDM 8.0 for quite some time now to manage Users in an exchange 2007 environment, without major issues. Now I finally got a new, improved test-environment, which includes a test-active-directory and a test exchange 2007 installation. Just two servers, probably the smallest possible configuration.
Now, everything works fine when I stick to the regular exchange 2007 management-tools, but it just won't work when using sun idm. :-(
I can create and modify activedirectory accounts without any issues, but when setting "recipient type" to UserMailbox, the operation suceeds but no mailbox is created. I activated tracing in the gateway and there is "getRecipientType: user not found" messages, which I suppose are related to my issue.
I definitly run the same idm-configuration in my production-environment without any issues. My exchange-admin claims that the exchange-environment has no differences either. I tried to run the gateway both on the domain controler and the exchange 2007 server, but found no difference.
Sadly, I'm running out of ideas..... :-(
Any help would be greatly appreciated...
CU,
Patrick.Problem was caused by 32-bit-gw on 64-bit-platform. Strange error-message, though.
-
X2go : "Connection failed sh: 1: x2golistsessions: not found"
i am trying to connect to a school computer via x2go. I can connect via ssh to the server and start x programs via x-forwarding and such. However i cannot connect via x2go in any way. I do not have admin permissions on the school computer but i can start a gnome session with the command "gnome-session".
However when i start x2goclient and try to connect using in my opinion the same settings i get this error
Connection failed sh: 1: x2golistsessions: not found
The complete terminal output from the program during one try is :
[username@hostname ~]$ x2goclient
ONMainWindow constructor
Can't load translator (:/x2goclient_en_us) !
Can't load translator :/qt_en_US
ONMainWindows constructor finished, home Directory is: "/home/username"
read 1 sessions from config file
start new ssh connection to server: "my.school.adress" : "22" krb: false
ssh connection ok
continue normal x2go session
close event
saving settings
done
waiting sshConnection to finish
sshConnection is closed
help pleaseHello,
personally I think that in step 3/5 the connection via JCO is tested. Please, check the following
Can you connect to your B1i System and have a look for the SLD, there should be a system that points to your company database. If there is a system definition that points to B1if then go further. Check the B1if connection, please take the B1DI connection test, is there a message like
com.sap.b1i.adapter.dia.exception.ConnectionFailedException: Connect to Business One failed.
(-8012) Company version mismatch
{b1Server=..., company=B1if, licenseServer=..., dbType=..., dbUser=..., userName=...}
In case this message comes up and you see B1if then the JCO configuration went wrong and that part is defined in the beginning of the installation.
Hope it helps
Kind Regards -
WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found
Hi,
I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
wsyncmgr:
Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
3668 (0x0E54)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
1/9/2015 12:00:00 PM 3668 (0x0E54)
WCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
Did not find supported version of assembly Microsoft.UpdateServices.Administration.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
1/9/2015 11:19:03 AM 4176 (0x1050)
STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
Remote configuration failed on WSUS Server.
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
4176 (0x1050)
I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
Regards,
MalwinderWCM:
Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
It's not only a matter of installing the console, but also those hotfixes on a remote server ...
Torsten Meringer | http://www.mssccmfaq.de -
Import export utility user not found
I'm getting the following error when running the 9.3.1 ImportExportUtility on a 9.2.0.2 version of Shared Services. NTLM is used as the authentication provider.
2009-06-19 08:49:30,642 Export : Exception encountered while retrieving user ntlm://SID=S-1-5-21-2134593322-327503246-231145771-21130?USER
2009-06-19 08:49:30,642 Export : Root cause : User not found with identity = ntlm://SID=S-1-5-21-2134593322-327503246-231145771-21130?USER
2009-06-19 08:49:30,658 Export : Silently ignoring the last error
There were 99 users extracted and this message appeared for 36 of the 99. Could someone tell me where the users are not in sync. Is it between Open Ldap and NTLM, Open Ldap and the application repository, etc. Also, is there a way of identifying the user Id. from the message.
Thanks,
TomI finally found a real solution to this problem and I wish I had found it sooner.......
Starting sometime around 9.2, Oracle started including a tool called : UpdateNativeDir
The primary purpose of the tool (as I understand it) is to allow you to do a refresh between your external provider (i.e. Active Directory) and the native (OpenLDAP) directory in the event you moved directories around. This tool will also purge any invalid entries that are in the local (LDAP) directory that are not in the external provider.
The tool is pretty straight forward and the readme file explains the details of how to use it.
I've tested this tool in our dev and production environments now and it does exactly what I need. The additional benefit is that I can schedule this to run periodically to ensure the directories are sync'd.
The tool is going to be on your Shared Services machine and comes zipped in a file called UpdateNativeDir.zip
According to the documention (9.2.0.3) it is located at :
<Hyperion_Home>/common/utilities/nativedirectoryupdateutility
On our 9.3.1 Shared Services box, I located it at :
<Hyperion_Home>/common/utilities/SyncOpenLdapUtility -
User not found error when connecting to MDM server using NWDS
Hi,
I am getting the error as " User not found " when i am connecting to MDM server from the code written in NWDS.
If i make that user as admin in usermapping in MDM den it works fine bt if that user is not admin den get the error as user not found.
Please help.Hi,
Thanks for the reply.
I have added the user in user mapping in MDM server. but i have to give the authority as admin.
other users who are added in usermapping bt not assigned as admin are getting the error.
Maybe you are looking for
-
I have dynamically created a drop shadow for an mc in my project. That's no big deal. The settings are not difficult, either. This is the frustrating part - I cannot get the settings to change on the fly and react to input. In this instance, I am usi
-
I am trying to extract the data from database using DB Adapter. But it is showing the below error when I am trying to launch the message flow(in assign activity). [2009/11/17 17:48:47] Error in evaluate <from> expression at line "92". The result is e
-
Get the pointOfDelivery in event EH_ONSAVE, component IUICOBJ
Hello Experts, A lot of Thanks for reading this, and Thanks for your time. I have a new question, In Component: IUICOBJ View: SOToolbar Event: EH_ONSAVE. I have checked Me->typed_context and the objects, and pointOfDelivery there isn't, How I can get
-
My photoshop cs6 is flickering in windows 8
whenever i am dragging files or even editing them in photoshop it like flickers/flashes for awhile . Does anybody know if there is a fix for this yet? or is it just mine with this problem? Much appreciated shaun martin blueboxmedia
-
I am trying to write a program which screenshots (using a robot) an HTMLeditorkit inside a jWindow. My problem is that I need a way to ensure that the window is completely drawn before the robot takes the screen capture. I have tried using invokeLate