Trouble Jumpstarting

Hi, I was wondering if anyone can help me out. I'm trying to jumpstart a server and the server gets stuck here:
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
29200 Using RARP/BOOTPARAMS...
Requesting Internet address for 0:3:ba:1e:d7:61
Internet address is: 172.30.1.93

check with arp -a mac is showing or not...
arp -s to create arp entry
Regards,
Saran

Similar Messages

Jumpstart across subnets

Hello
I am having trouble configuring my jet toolkit to boot across subnets.
It works fine in the same subnet but when it goes across subnets it seems to lose the default router for the client.
{0} ok boot net:dhcp - install
Resetting...
POST Sequence 01 CPU Check
POST Sequence 02 Banner
LSB#00 (XSB#00-0): POST 2.12.0 (2009/09/09 15:17)
POST Sequence 03 Fatal Check
POST Sequence 04 CPU Register
POST Sequence 05 STICK
POST Sequence 06 MMU
POST Sequence 07 Memory Initialize
POST Sequence 08 Memory
POST Sequence 09 Raw UE In Cache
POST Sequence 0A Floating Point Unit
POST Sequence 0B SC
POST Sequence 0C Cacheable Instruction
POST Sequence 0D Softint
POST Sequence 0E CPU Cross Call
POST Sequence 0F CMU-CH
POST Sequence 10 PCI-CH
POST Sequence 11 Master Device
POST Sequence 12 DSCP
POST Sequence 13 SC Check Before STICK Diag
POST Sequence 14 STICK Stop
POST Sequence 15 STICK Start
POST Sequence 16 Error CPU Check
POST Sequence 17 System Configuration
POST Sequence 18 System Status Check
POST Sequence 19 System Status Check After Sync
POST Sequence 1A OpenBoot Start...
POST Sequence Complete.
Sun SPARC Enterprise M4000 Server, using Domain console
Copyright 2009 Sun Microsystems, Inc. All rights reserved.
Copyright 2009 Sun Microsystems, Inc. and Fujitsu Limited. All rights reserved.
OpenBoot 4.24.12, 32768 MB memory installed, Serial #91113890.
Ethernet address 0:21:28:6e:49:a2, Host ID: 856e49a2.
Rebooting with command: boot net:dhcp - install
Boot device: /pci@0,600000/pci@0/pci@8/pci@0/network@2:dhcp File and args: - install
1000 Mbps full duplex Link up
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for BOOTP/DHCP reply
Timed out waiting for TFTP reply
Timed out waiting for TFTP reply
Timed out waiting for TFTP reply
Timed out waiting for TFTP reply
I have entered the router info in the defaultrouters file
kenapps08g:global# cat defaultrouters
# You can use this file to allow templates to be auto-populated with additional
# default router settings, especially useful for managing large numbers o
# server templates.
# Format:
# <subnet> <mask> <default router>
# Example:
# 192.168.1.0 255.255.255.0 192.168.1.254
10.0.1.0 255.255.255.0 10.0.1.1
10.0.2.0 255.255.255.0 10.0.2.1
10.0.3.0 255.255.255.0 10.0.3.1
</opt/SUNWjet/etc>
kenapps08g:global# more dhcp.conf
# This file is used to control some of the options for the DHCP boot
# environment
# DHCPDIR: The replies sent out by DHCP are limited in length; we use
# this directory to create symlinks to the actual Solaris
# media dirs; the intention is to keep paths short!
# N.B. If you change this, please make sure the new area is
# properly shared in /etc/dfs/dfstab
DHCPDIR="/dhcp"
# DEBUG_DHCP keep temporary files around after client_allocate_pdhcp.SunOS
# has run. Non-null invokes debug
DEBUG_DHCP=""
# REMOTE_DHCP define the hostname of the Sun server running Sun's DHCP daemon
REMOTE_DHCP="kenapps08g"
# REMOTE_DHCP_METHOD define what method to use to propogate. ssh is currently
# supported and requires you set up a trust relationship
# between this server and it.
REMOTE_DHCP_METHOD="ssh"
# DHCP_FORMAT Which dhcp server type is supported. SUN is currently supported,
# however, ISC is still in development. If REMOTE_DHCP is set,
# you must set DHCP_FORMAT to SUN. Valid entries are "SUN"
# and "NOOP". NOOP can be used if you are manually setting
# up your own DHCP server with the required parameters.
DHCP_FORMAT="SUN"
kenapps08g:global# more dhcp_servers
# You can use this file to define the DHCP servers responsible
# for different subnets.
# This is only required if you have multiple DHCP servers.
# If a match is found, the settings in this file will be used,
# otherwise the DHCP server defined in dhcp.conf will be used.
# Format:
# <client network> <client mask> <dhcp-server-name> <dhcp-server-tyep> <method>#
# <dhcp-server-name> overrides the REMOTE_DHCP setting
# <dhcp-server-type> overrides the DHCP_FORMAT setting
# <method> overrides the REMOTE_DHCP_METHOD setting
# Example:
# 192.168.1.0 255.255.255.0 dhcpserver1 SUN ssh
10.0.1.210 255.255.255.0 kenapps08g SUN ssh
10.245.64.10 255.255.255.0 lisjump01g SUN ssh
kenapps08g:global# more jumpstart.conf
# This config file defines the jumpstart specific variables.
# Version: $Revision: 1.8 $
# Last Updated; $Date: 2009/04/15 12:41:29 $
# Location of the additional media for patches and packages:
# These paths should be URI form e.g. nfs://<serverip>/<path> or <path>
# Currently only PKG_DIR and PATCH_DIR can be on a remote NFS server.
# If they are just <path>, the appropriate address of the JumpStart server
# will be added.
# N.B. if the media location is on a different server, please ensure it is
# routable from the client !
# You can specify an alternative location for where the client can
# NFS mount the /opt/SUNWjet directory. Simply provide the IP address
# of the server or the IP address and path on the remote server
# in the JS_CFG_SVR variable. However, this MUST be mounted
# on the JET server in /opt/SUNWjet as well, and be rw by root.
# e.g. JS_CFG_SVR="nas_server1" or
# JS_CFG_SVR="nas_server1:/unixshare/SUNWjet"
# When using an NFS server for images, even though the JET server
# MUST have the boot media locally, it is possible to have the client
# net boot from the remote NFS server. By default, clients will boot from
# the JET server. To override this, set JS_CLIENT_BOOT to "remote".
JS_Default_Root_PW=M4JVhMPO9CaQw
JS_BUILD_DIR=/var/opt/sun/jet
JS_PKG_DIR=/vendor/jumpstart/pkgs
JS_PATCH_DIR=/vendor/jumpstart/patches
JS_CFG_SVR=
JS_SOLARIS_DIR=/vendor/jumpstart
#JS_DHCP_VENDOR="SUNW.Ultra-5_10 SUNW.Ultra-30"
JS_DHCP_VENDOR="SUNW.Sun-Fire-T1000 SUNW.Sun-Fire-V240 SUNW.SPARC-Enterprise"
#JS_CLIENT_MANAGEMENT="bootp"
JS_CLIENT_BOOT="local"
kenapps08g:global# more server_interfaces
# You can use this file to help JET determine the correct IP address to
# use when it is configured on multi-homed hosts. It is also used to
# define which servers on different subnets whcih can be used in conjnction
# with dhcp.
# As we don't know which side of the server clients will connect through,
# you can set things up here - especially useful if this server is not
# a router either.
# Format:
# <client network> <client mask> <our preferred ip address>
# Example:
# 192.168.1.0 255.255.255.0 10.0.0.1
10.245.64.0 255.255.255.0 10.0.1.210
10.0.3.0 255.255.255.0 10.0.1.210
It has to be a defaultrouter setting somewhere because I can ping the server during jumpstart only from its own subnet.
during the dhcp part it looks like the traffic is coming thru and it gets its offer then during the tftp part no traffic comes across anymore
I am stuck on this one.
thanks

this file is in place with the interfaces
kenapps08g:global# cat defaultrouters
# You can use this file to allow templates to be auto-populated with additional
# default router settings, especially useful for managing large numbers o
# server templates.
# Format:
# <subnet> <mask> <default router>
# Example:
# 192.168.1.0 255.255.255.0 192.168.1.254
10.0.1.0 255.255.255.0 10.0.1.1
10.0.3.0 255.255.255.0 10.0.3.1
183.1.2.0 255.255.255.0 183.1.2.209
</opt/SUNWjet/etc>
kenapps08g:global# cat server_interfaces
# You can use this file to help JET determine the correct IP address to
# use when it is configured on multi-homed hosts. It is also used to
# define which servers on different subnets whcih can be used in conjnction
# with dhcp.
# As we don't know which side of the server clients will connect through,
# you can set things up here - especially useful if this server is not
# a router either.
# Format:
# <client network> <client mask> <our preferred ip address>
# Example:
# 192.168.1.0 255.255.255.0 10.0.0.1
10.0.1.0 255.255.255.0 10.0.1.210
10.0.3.0 255.255.255.0 10.0.1.210
183.1.2.0 255.255.255.0 10.0.1.210

Best way to update a solaris jumpstart OS image.

Hi all,.
Ive been recently building some v240's but have run into trouble with the rather out of date 02/02 instance of Solaris 8 (yes, i did say solaris 8 - it's a political thing..)
Anyhow, I have cd images of Solaris 8 02/04 and have a copy of the Sun Blueprints Jumpstart book by "Howard and Noordergraph".
On page 92, it says to use the "setup_install_server" script with the -b option for /jumpstart/OS/Solaris-xx-xx-xx.
Ive done that without any probs, then it goes on to say if you want an install server do the same command again without the -b switch.
Problem is that it spews out this message.
733 root@bbs00080 # ./setup_install_server -b /jumpstart/OS/Solaris_8_02-2004/
Verifying target directory...
setup_install_server:
The target directory /jumpstart/OS/Solaris_8_02-2004/ is not empty. Please choose an empty
directory or remove all files from the specified directory and run
this program again.
So i chose an empty directory and it goes and does it.
Is this an errata?
I already have /jumpstart/OS/Solaris_8_02-2002/ and I wanted to update the files so that I can boot the v240r.
Except 02/02 doesnt let me do that as it doesnt support the v240r arch.
Sun told me this, but I'm lost because my existing profile for this box, lists all the packages I want to install, but it whinges about not being able to find a .cdrom toc file.
I already have three flash archives which i created from good builds from 02/02, in my rules file which work, but this pesky update for the 240r is getting to be a little tricky.
So far, ive tried copying all the packages from 02/02/Products directory into 02/04/Products but some of them don't install despite being there.
Can anyone suggest the best way to update my 02/02 with the 02/04 boot loader for the v240?
Thanks in advance and sorry for any confusion.
D.

I'm sorry. I meant. Say my array of x positions is 3, 4, 9. I change 9 to 30. How can I make the polygon see that change?

Solaris 10 x86 u5 dhcp and jumpstart install fail

hello
I have problem in solaris 10 u5 jumpstart install.
I can use jumpstart install with dhcp and get a static ip address (assigned by dhcp server) before solaris 10 u3.
But now I can't use jumpstart install in solaris 10 u5 without setting up a static ip address in sysidcfg.
I have many x86 machines.
If I have to set up every different sysidcfg for every machine when I install a new machine.
I will get into big trouble.
here is my sysidcfg
###### sysidcfg #######
system_locale=en_US
timeserver=localhost
timezone=Asia/Taipei
terminal=sun-color
security_policy=NONE
root_password=xxxxxxxx
nfs4_domain=example.com
network_interface=primary { hostname=solaris
default_route=192.168.100.254
netmask=255.255.255.0
protocol_ipv6=no}
name_service=DNS {domain_name=example.com
name_server=192.168.100.1
search=example.com}
Edited by: cheung79 on 2008/4/19 ?? 5:29

I think that you should modify the script discovery-install, so you'll be able to create the sysidcfg file dynamically. I had the same problem as you and there is a possibility to add some arguments to the boot command that you execute at the ok prompt. These arguments can be defined in the discovery-install script. It's quite easy.
Regards,
Przemek

T5220 and Solaris 10 U6 - Jumpstart problem

Hi
Server T5220 booting and installing (Sol 10u6) from DVD without any problem.
But when I try to install server via net I have problem.
I prepared install server according doc (Solaris 10 8/07 Installation Guide: Network-Based Installation)
Install server and client are Sun T5220, both are in one subnet
When I try boot client I received error message:
{0} ok boot net -v -s
SPARC Enterprise T5220, No Keyboard
Copyright 2008 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.29.0.a, 32640 MB memory available, Serial #xxxxxx.
Ethernet address 0:14:4f:97:7a:xx, Host ID: 84977axx.
Boot device: /pci@0/pci@0/pci@1/pci@0/pci@2/network@0 File and args: -v -s
1000 Mbps full duplex Link up
Requesting Internet Address for 0:14:4f:97:7a:xx
Requesting Internet Address for 0:14:4f:97:7a:xx
1000 Mbps full duplex Link up
Using RARP/BOOTPARAMS...
Internet address is: 192.168.215.13
hostname: despina
domainname: xxx.xxx.xx
Found 192.168.215.133 @ 0:14:4f:97:88:xx
root server: tavros (192.168.215.133)
root directory: /users/is/Solaris10_10_08/Solaris_10/Tools/Boot
boot: cannot open kernel/sparcv9/unix
Enter filename [kernel/sparcv9/unix]:
Where is a problem ?
Regards,
edek69

I have a similar problem:
1) mount DVD ISO image using lofiadm and mount -F hsfs # no problems
2) ./setup_install_server to /jumpstart/OS/Solaris_10_2008-10 # completes normally
3) cd to /jumpstart/OS/Solaris_10_2008-10/Solaris_10/Tools
4) ./add_install_client -i $1 -e $2 -s $4:/jumpstart/OS/Solaris_10_2008-10 -p $4:/jumpstart/SYSIDCFG/Solaris_10 -c $4:/jumpstart -n $4:none$255.255.254.0$ $3 sun4u
# I supply 1=IP, 2=MAC ,3=name , 4=server IP, also tried a T5140 sun4v server.
5) on client I reset all, then 'boot -s -v' with the following results:
cannot open neither boot_archive nor miniroot
Enter filename [boot_archive]:
Looking at the results from snoop, its appears to have trouble navigating/opening the sparc.miniroot in /jumpstart/OS/Solaris_10_2008-10/boot from the platform/sun4u/ sub-dir link.
If I revert back to my 2008-05 build everything works. Is there anything I'm missing?

Unable to Jumpstart V400 off the NET

I'm trying to install Solaris 10 10/08 on my V440 and I'm getting the error below. I've installed many servers with my JET/Jumpstart server, but for some reason this one is giving me trouble. It is the first V440 I attempted though.
{0} ok boot net -v
SC Alert: Host System has Reset
Sun Fire V440, Keyboard Present
Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.13.0, 8192 MB memory installed, Serial #60235787.
Ethernet address 0:3:ba:96:29:b, Host ID: 8397200b.
Rebooting with command: boot net -v
Boot device: /pci@1c,600000/network@2 File and args: -v
/pci@1c,600000/network@2: 1000 Mbps full duplex link up
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
4000 /pci@1c,600000/network@2: 1000 Mbps full duplex link up
Using RARP/BOOTPARAMS..
Requesting Internet address for 0:3:ba:96:29:b
Internet address is: XX.XX.XX.27
hostname: myhost
Found XX.XX.XX.42 @ 0:14:4f:a3:98:8a
root server: XX.XX.XX.42 (155.XX.XX.42)
root directory: /export/install/Solaris_10/Solaris_10/Tools/Boot
boot: lookup /export/install/Solaris_10/Solaris_10/Tools/Boot failed
boot failed
Any help would be appreciated.
G

Have same issue with 420R hardware.
If I make separate boot server in another directory on install-server, 'boot net' works.
Boot directory structure and files the same on both copies except Java and installers...
#diff -r /jumpstart/solX/Solaris_10/Tools /jumpstart/solX.boot/Solaris_10/Tools
diff: /jumpstart/solX.boot/Solaris_10/Tools/Installers/.install/JRE: No such file or directory
diff: /jumpstart/solX.boot/Solaris_10/Tools/Installers/.install/com/sun/launcher: No such file or directory
diff: /jumpstart/solX.boot/Solaris_10/Tools/Installers/.install/com/sun/liveupgrade: No such file or directory
#diff -r /jumpstart/solX/boot /jumpstart/solX.boot/boot
# ^^^ no differences
Posible we hit some file cache (in my case I've used same directory path for 10/08 install-server; directory with previous version was renamed).

Having trouble with FileUploader

I am having trouble with the FileUploader control.   The use case is to upload a picture for a user to display on a user profile page.
The first thing I did was take the code from the SAPUI5 DemoKit and modify the uploadUrl to a local directory in my project. This works on the DemoKit and I can see that my file gets uploaded to the ../../../../../uploads directory on the sapui5.ondemand site.   But when I try it locally on my project, it fails to post to the directory.
I figured I would skinny it down to the least amount of code to test it.
var layout = new sap.ui.commons.layout.MatrixLayout();
layout.setLayoutFixed(false);
var oUpload = new sap.ui.commons.FileUploader( {
mimeType: "image,text",
fileType: "jpg,png,gif",
uploadUrl:      "../images/devices",
name:           "Uploader",
width:      '500px',
buttonText:   "..",
tooltip:    "File Name",
value:          '',
uploadOnChange: true
layout.createRow( oUpload );
return layout;
When it does the POST, I get a 405 Method Not Allowed error on my local server.   Is there something that needs to be configured on the server-side?
I tried putting in an .xsaccess file in the upload folder and parent folder(s) but it does not seem to help.
I have seen some of the other posts on SCN:
This one claims we need a server-side servlet to handle the file.   FileUploader
This post has a similar 405 error down in the comments: Import text file from JS to XSJS
So the questions are:
1) Can someone confirm if I can simply write an image to the folder like in the DemoKit? What is needed to make this work?
2) If I cannot write to the folder directly, can someone share their "FileUpload.xsjs" code logic to help me get jumpstarted?
3) What have I missed with the FileUploader?
Thank you,
Jim Giffin
Edit - my current environment is HANA DB 1.00.70.386119, SAPUI5 points to the sapui5.hana.ondemand.com version which is currently 1.20.6, but I have checked out openUI5 1.20.8.
Message was edited by: Jim Giffin
I also failed to mention this is a Developer instance on AWS.

Hi Jim,
answer from discussion you mentioned is correct. You need some server-side handler that will take care of the file and uploads it to directory.
Demokit example does not point to directory "upload", but it is a relative url address.
If you type sapui5.hana.ondemand.com/sdk/test-resources/sap/ui/commons/demokit/../../../../../upload
you will see that it is actually url address sapui5.hana.ondemand.com/sdk/upload which points to some server-side handler.
For you second question, this could be what you are looking for - Upload data to HANA table with SAPUI5 FileLoader and HANA Extended Services
Best regards,
Peter

How to change the default JET (JumpStart) password

I am using JET (Jumpstart Enterprise Toolkit) to jumpstart my servers. The default password, boajrOmU7GFmY, is saved in a encrypted form in jumpstart.conf. I want to change it, how do I know the encrypted form of my new password?
Tom

Usage: orapwd file=<fname> password=<password> entries=<users>
where
file - name of password file (mand),
password - password for SYS and INTERNAL (mand),
entries - maximum number of distinct DBA and OPERs (opt),
There are no spaces around the equal-to (=) character.

Mini-Dvi-to-Video trouble

I just bought a mini-dvi-to-video adapter so I could use my TV as a display. More specifically, so I could use my VCR to record what's on my Mac's display. I also bought a headphone-to-composite cable adapter. I'm using a double-headed (is that one male or female? It's male, isn't it?) composite cable from the video adapter to the VCR. The problem is, it doesn't show up. The sound plays (and records) fine, but the video neither shows up on the TV screen nor records onto the tape. What's the problem? Both adapters are Dynex, my computer's a Late 2006 iMac (I think), the cable is WireLogic, and both the VCR and TV are Sony. Please help, thanks.

So if you eliminate the double headed splitter and plug straight into the TV, does the video still not show up?
FYI, there have been reports in the past of trouble with the Dynex video adapter. You may need to purchase the Apple OEM one. The Dynex may lack having a ROM inside of it with a proper EDID in the ROM. This is crucial to the Mac.

Trouble Using Apple's Video Adapter

I am having trouble getting my eMac to work with the Apple Mini-DVI to Video Adapter. There are no directions telling you how to use it or to even get it to work. I want to use it to import videos from my Sony Hi8 camcorder and was told by Apple's Live help that this is what I needed to import video and make DVDs. How do I get this adapter to work?

Welcome aboard.
I think the adapter you have is for video output, not input. To input video to the eMac you need a firewire connection. Sony cameras typically have a 4 wire connector which is smaller than the 6 wire plug on the mac, so you need a cable that has a 4 wire connector on one end and a 6 wire connector on the other. Cameras often (but not always) come with such a cable. You also need a digital camcorder- not just Hi8., although Sony does make cameras that will do both. If you camera does not have digital output, you need a convertor box.

Hi, I am having trouble MacBook Air crashing since Yosemite upgrade. I ran an Etresoft check but I don't know what it means... my system runs slowly and crashes. I have to force shutdown. Sometimes screen is black for a split second b/w webmail pages

Hello,
I am having trouble with my MacBook Air 13 inch June 2012 MacBook Air5, 2 4GB RAM details below in Etresoft report. I recently upgraded to Yosemite and am having system trouble. My computer crashes and I have to force quit to restart. When using webmail there is a black screen for a split second between pages. This did not happen before. I am worried that it is not running properly and perhaps I need to revert to the previous operating system. I only have a MacBook Air and no need to share images between a tablet or phone so I did not need the new photo sharing software of Yosemite. I wonder if I don't have enough RAM to run it? I did not run time machine before I made the upgrade as I did not realise the significance of an upgrade as not very Mac literate. Any advice on whether my system is in danger... most appreciated! I am writing a book and making a back up but this machine is my lifeline and my work is conducted through it. It ran perfectly before... the Yosemite upgrade has perhaps highlighted some problems and it has unnerved me!
Thanks ever so much for your advice!
Lillibet
EtreCheck version: 2.2 (132)
Report generated 5/2/15, 9:53 PM
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Air (13-inch, Mid 2012) (Technical Specifications)
    MacBook Air - model: MacBookAir5,2
    1 1.8 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Not upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en0: 802.11 a/b/g/n
    Battery: Health = Normal - Cycle count = 694 - SN = D86218700K2DKRNAF
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1440 x 900
System Software: ℹ️
    OS X 10.10.3 (14D136) - Time since boot: 0:22:41
Disk Information: ℹ️
    APPLE SSD SM256E disk0 : (251 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Macintosh HD (disk1) / : 249.77 GB (167.35 GB free)
            Encrypted AES-XTS Unlocked
            Core Storage: disk0s2 250.14 GB Online
USB Information: ℹ️
    Apple, Inc. Keyboard Hub
        Mitsumi Electric Apple Optical USB Mouse
        Apple Inc. Apple Keyboard
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Internal Memory Card Reader
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/WD +TURBO Installer.app
    [not loaded]    com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
    [not loaded]    com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
    [not loaded]    com.wdc.driver.USB-64HP (1.0.3) [Click for support]
    [not loaded]    com.wdc.driver.USBHP (1.0.14) [Click for support]
        /System/Library/Extensions
    [not loaded]    com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
    [loaded]    com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9) [Click for support]
Problem System Launch Daemons: ℹ️
    [failed]    com.apple.mtrecorder.plist
Launch Agents: ℹ️
    [running]    com.mcafee.menulet.plist [Click for support]
    [running]    com.mcafee.reporter.plist [Click for support]
    [loaded]    com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
    [running]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.adobe.fpsaud.plist [Click for support]
    [failed]    com.apple.spirecorder.plist
    [running]    com.mcafee.ssm.Eupdate.plist [Click for support]
    [running]    com.mcafee.ssm.ScanManager.plist [Click for support]
    [running]    com.mcafee.virusscan.fmpd.plist [Click for support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.ARM.[...].plist [Click for support]
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Dropbox    Application (/Applications/Dropbox.app)
    AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    EvernoteHelper    Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    TouchP-150M    Application (/Applications/Canon P-150M/TouchP-150M.app)
    iPhoto    Application (/Applications/iPhoto.app)
    WDDriveUtilityHelper    Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
    WDSecurityHelper    Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    QuickTime Plugin: Version: 7.7.3
    AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
    AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
    Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
    Default Browser: Version: 600 - SDK 10.10
    JavaAppletPlugin: Version: Java 8 Update 45 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Click for support]
    FUSE for OS X (OSXFUSE) [Click for support]
    Java [Click for support]
    MacFUSE [Click for support]
    NTFS-3G [Click for support]
Time Machine: ℹ️
    Skip System Files: NO
    Mobile backups: ON
    Auto backup: YES
    Volumes being backed up:
        Macintosh HD: Disk size: 249.77 GB Disk used: 82.42 GB
    Destinations:
        My Passport Edge for Mac [Local]
        Total size: 499.94 GB
        Total number of backups: 27
        Oldest backup: 2013-01-31 21:15:26 +0000
        Last backup: 2015-05-02 11:33:09 +0000
        Size of backup disk: Adequate
            Backup size 499.94 GB > (Disk used 82.42 GB X 3)
Top Processes by CPU: ℹ️
         6%    WindowServer
         3%    fontd
         2%    VShieldScanManager
         0%    taskgated
         0%    notifyd
Top Processes by Memory: ℹ️
    745 MB    Google Chrome Helper(8)
    439 MB    kernel_task
    246 MB    VShieldScanner(3)
    160 MB    Google Chrome
    127 MB    Finder
Virtual Memory Information: ℹ️
    130 MB    Free RAM
    3.87 GB    Used RAM
    0 B    Swap Used
Diagnostics Information: ℹ️
    May 2, 2015, 09:30:08 PM    Self test - passed
    May 2, 2015, 08:52:59 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-02-205259_[red acted].crash
    May 2, 2015, 09:28:53 AM    /Library/Logs/DiagnosticReports/backupd_2015-05-02-092853_[redacted].cpu_resour ce.diag [Click for details]
    May 1, 2015, 05:45:24 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/EvernoteHelper_2015-05-01-1745 24_[redacted].crash
    May 1, 2015, 05:38:54 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173854_[redacted].crash
    May 1, 2015, 05:38:43 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173843_[redacted].crash
    May 1, 2015, 05:38:32 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173832_[redacted].crash
    May 1, 2015, 05:38:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173827_[redacted].crash
    May 1, 2015, 05:38:10 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173810_[redacted].crash
    May 1, 2015, 05:38:00 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173800_[redacted].crash
    May 1, 2015, 05:37:49 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173749_[redacted].crash
    May 1, 2015, 05:37:38 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173738_[redacted].crash
    May 1, 2015, 05:37:27 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173727_[redacted].crash
    May 1, 2015, 05:37:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173722_[redacted].crash
    May 1, 2015, 05:37:06 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173706_[redacted].crash
    May 1, 2015, 05:36:55 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173655_[redacted].crash
    May 1, 2015, 05:36:44 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173644_[redacted].crash
    May 1, 2015, 05:36:33 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173633_[redacted].crash
    May 1, 2015, 05:36:22 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173622_[redacted].crash
    May 1, 2015, 05:36:17 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173617_[redacted].crash
    May 1, 2015, 05:36:01 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173601_[redacted].crash
    May 1, 2015, 05:35:50 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173550_[redacted].crash
    May 1, 2015, 05:35:39 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173539_[redacted].crash
    May 1, 2015, 05:35:28 PM    /Library/Logs/DiagnosticReports/mds_2015-05-01-173528_[redacted].crash
    May 1, 2015, 05:20:29 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-172029_[red acted].crash
    May 1, 2015, 04:55:05 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/soffice_2015-05-01-165505_[red acted].crash
    May 1, 2015, 02:53:58 PM    /Library/Logs/DiagnosticReports/sharingd_2015-05-01-145358_[redacted].crash
    Apr 20, 2015, 09:31:20 PM    /Library/Logs/DiagnosticReports/Kernel_2015-04-20-213120_[redacted].panic [Click for details]

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

I had a 1 TB Drive that was connected as a back up, but it is no longer recognized by the mac. How may I trouble shoot to reconnect?

how do I trouble shoot this?

emanwine wrote:
Got it to connect and it is my back up. ...
Good News.
If this is your only Backup would suggest getting a New EHD and creating another one... Preferably a Clone if you don't already have one.
http://www.bombich.com/
Can never have too many Backups...

I am having trouble printing to an Epson XP600. It is a new printer and it has been replaced because we thought it was the printer. Basically, when I print from Excel, only color will print.

I am having trouble printing to an Epson XP600. We have replaced the printer and we are still having the same problem. When I try to print from Excel, only the color prints. Any suggestions?

Has anyone else had issues not being able to print black (such as a document)? My photos print great, but when I try to print a simple black-ink document, it won't work. Any suggestions?

I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

What 24 character verification is it talking about???? I've never had so much trouble just to download something that is going to take a day and half

I purchased the student version of Photoshop and Lightroom a few weeks ago
I have a 19 digit code that i had to scratch to get, a 30 digit number under the bar code, and a 6 digit authorization code that seems to be completely pointless. I started off putting in the 19 digit code with all my other information, but it wanted 24. so I filled in the rest with zeros. Then it starts giving me so much trouble I don't think I'll ever attempt to get photoshop again.

You may want to check all about serial numbers and redemption codes here: Find your serial number quickly

Trouble Jumpstarting

Similar Messages

Maybe you are looking for