Trouble moving project via X-San

Hello,
I am having trouble moving a project between edit suites using an X-San. When attemping to open the timeline in another room I receive two errors,
1. Error: Access Denied
2. Error: Out of Memory
I have check to make sure I have Read/Write Permissions ect.
Has anyone had this problem or know what might cause it?
Thanks in advance!!

There seems to be a lag with the Mail.app in regards to synchronization with messages stored on the server even when selecting "Automatically synchronize changed mailboxes" under the Advanced tab for the account preferences.
As a test, after doing the same try taking the account offline and then online and or quit and re-launch the Mail.app.
Check if the transferred message is still in both locations on the server.

Similar Messages

  • Trouble moving projects from one computer to another

    In the prospect of clearing up space, I am moving projects from my hard drive to an external.  In order to make sure things are moving properly I open up a project from the external onto another computer, different from the one I moved the projects off of.  When I open up the project, part of the original footage (.MTS file) does not show up in the timeline.  The blue rectangle that represents the footage is striped.  When I open up the exact same project onto the original computer from the external everything is fine.
    Also, when I was opening up a project from the external to the other computer the "Locate Media" pop up appears wanting me to link all the media, but all the media has been checked off, as if all the media has already been found.  Why does it do this?
    Thanks,
    Josh

    Hi Josh,
    Check this out: Moving projects to another computer: http://help.adobe.com/en_US/premierepro/cs/using/WS1BF3BAAB-A930-44e3-8DFA-50D5C58A1A1Aa.h tml#WS3D22F379-B6C7-4d8c-9548-26AA3E1EA74F
    Likely you have some of the MTS file structure missing. The best way to move projects, IMHO, is to use the Project Manager.
    Thanks,
    Kevin

  • Trouble moving project

    I would like to move a project to a second computer. I selected the project, went to File>Move Project, but in the location box it says "No Value." Apparently it isn't recognizing my external device (a USB thumb drive) even though it does show up in the finder. Any suggestions?

    The thumb drive is 32 gig and the media is just one clip under 60 seconds so I didn't figure that to be a problem. My intent was to transfer the project/event from my work computer to the thumb and then plug it into my personal laptop, but FCPX doesn't seem to be seeing the thumb even though the computer is seeing it because it shows up in the finder and on the desktop. I tried dragging the project from the project library to the thumb icon on the desktop but it wouldn't go.

  • Trouble moving playhead along timeline

    Hi,
    I apologize if this questions has already been asked and answered. I tried searching through the Flash forum and was unable to find the answer I was looking for.
    I am very new to Flash and apologize for the simplicity of the question, but I am having trouble moving the playhead along the timeline in Flash. For example, when I open up a new Flash project, and start out with the initial layer with it’s single frame, I am having trouble moving the playhead forward to frame i.g. "75" or "80". My questions is, can I not move the playhead because I do not have content past frame one or can I not move the playhead because I have accidentally initiated a button or action that will only allow me to scrub my playhead through frames with content. On the off chance I had done this, I tried restarting Flash with the default settings with no success. Again, I realize this may be a very simple question and I am hoping the answer will be the same.

    when you're in the authoring environment, you need a frame to exist at 75 or 80 before you can move the play head there.  so, right click frame 75 and click insert frame or insert keyframe or insert blank keyframe.

  • I have PC with Windows 7 and iPad. My music in iTunes on PC is available under Music on iPad but having trouble moving music to i-Cloud. I suceed in moving the music to iCloud on PC but when I look at iPad music still on device and not in iCloud. Help?

    I am a beginner using Apple software, so please bare with me.
    I am having trouble moving music from the iPad to iCloud in order to save space in the device.
    I realise that in order to store music not purchased on iTunes store can only be stored in iCloud if you subscribe to iTunes Match which I have done.
    Appears that moving music from iTunes on my PC to iCloud is successful by deleting song or album in iTunes library and than click on "Keep song" instead of sending to recycle bin. After this has been done the Cloud Icon appears on the album or against the song. However when I then look at Music on the iPad the album or song have not been moved to iCloud. I have tried syncronising with cable connected between PC and iPad. After that has been done the message is that sync was successful bujt still music has not been moved into the Cloud.
    Can anybody help? What am I doing wrong? Is there a way to move the music to the cloud working on the iPad only (without trying to use the PC to move the music to the cloud)?

    You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device.  If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match. 
    Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases.  Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy.

  • Is it possible to export, and include AE compositions used within a Premiere Pro project, via project manager?

    I've several Premiere Pro CC 2014 projects I want to relocate via project manager (one at a time). They're excessive in size (many long and unused footage files), so "Create New Trimmed Project" is the setting-option, within project manager, most attractive. BTW I love how project manager does this... However, when I check on its new location, I don't see any linked AfterEffects files. Fine, I try the other setting "Collect Files and Copy to New Location". This option allows me to now copy everything including rendered scenes featuring my AE compositions (and a lot of excess, unused files)... but still no AE files!
    Is it possible to export a Premiere Pro project, excluding unused files, yet include all used files... especially linked files such as AE compositions?

    Though not exactly the solution I seek, I've tried an alternative approach... it works (if anyone's interested)... but my original question still stands.
    Alternative approach (and probably the only option now):
    When I copy & trim my Premiere Pro project via project manager to its new location, I can open the new file and see the track editor now includes broken links to AfterEffects compositions. Since I don't wish to relink these to the current .AEP file, I may package** the original AE project to a location near my newly-located Premiere Pro project folder. To do this, I open the original .AEP file containing any compositions linked to my original Premiere Pro project, and use File < Dependencies < Collect Files. This feature copies all files (and a new .AEP copy) from this AE project to my newly selected destination (as long as no files are missing).
    So at this point, when I open my newly-located PP project, I can relink the broken AfterEffects composition links in PP to the new .AEP file. Yay!
    **package (for those unaware) is the term used within Adobe InDesign. This feature gathers all linked files that makeup the overall design and layout, and copies into a new folder.

  • Slow Moving Project Stock

    Hi,
    My problem is to find out slow moving project stocks. Report MC46 shows only slow moving normal stocks and project stock is not included in this.
    Thanks

    Hi Gaurav Shah,
    If you are procuring for project stock means, the material is for direct consumption.I think its not logical to see it in terms of "slow moving stock" category.
    Hope I am right and it will be useful and give you some insights.

  • Moved Project To Knew Computer After Everything Is Named-Drive Formatting?

    Did search, and seems to be a common problem, but there are a little differences. In the past, when moving project, after starting, everything just showed up. This time, the red lines everywhere. Tried renaming file to clip and vice-versa, and nothing. Double-checked and have all the media. I thought the pathway pointers were imbedded, maybe not. Do have sub-clips. Did hear some talk about how the original media(P2 DV)is saved, can affect it. Was original saved to portable firewire drive that is Fat 32 to capture P2 in the field for Macbook pro. New media drive is extended. Any help is appreciated.

    Assuming that you have canvas and/or viewer set to "image" not "wireframe" the only thing I can say is that you double check again that you have the most updated version for Motion or a version that your FCP version would expect to connect with. I have seen other people experiencing this, the answer could be the awkward worst case scenario you want to avoid or simply an update inadvertently missed. Rather difficult to establish without investigating further within your actual workstation.
    G.

  • HT203433 I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    I am having trouble moving my music to my new computer. I have enable homeshare. it does not show any files in my homeshare. How do i get them out of the normal files into home share

    Welcome to the Apple Community.
    The following article(s) may help you.
    Moving your iTunes library to a new computer

  • TROUBLE MOVING CONTACTS FROM ONE GROUP , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE

    TROUBLE MOVING CONTACTS FROM ONE GROUP , , TO OTHER (APPLE ADDRESS BOOK) WHEN I TRY TO DRAG IT WON'T STAY . WHERE SHOULD I BE , AND HOW DO I DRAG ???? AND RELEASE   AB

    I have many different mailaccounts and different groups of contacts on my ipad and iphone. Sometimes i made the mistake when i create a new account linking it with the standard account. How it is possible to move one account to an other group?

  • Just recently my iPad started to get lazy on me I'll go on a website and it has trouble moving through the different applications within it. It has nothing to do with the wifi because it's doing it no matter what wifi it is using at the time.

    Just recently my iPad started to get lazy on me I'll go on a website and it has trouble moving through the different applications within it. It has nothing to do with the wifi because it's doing it no matter what wifi it is using at the time?

    Not sure what you are talking about.

  • Trouble moving from lightroom to Photoshop CS6 raw editor

    I am having trouble moving from my lightroom 4 to Photoshop camera raw. I can move directly to Photoshop but would like to use the raw editor in photoshop CS6 and not the lightroom editor

    Hi,
    You could use Photo>Edit In>Open as Smart Object in Photoshop
    (or right click on the photo and Edit In>Open as Smart Object in Photoshop)
    Then double click on the smart object thumbnail in the layers panel to open camera raw.

  • I am having trouble moving files from iPhoto to a thumb drive.  Sometimes I can move 20 photos next time I can only move 2 photos or 0---this is during the same session.  I also have trouble downloading photos to the internet.  Can someone please help?

    I am having trouble moving files from iphoto to a thumb drive.  During the same session sometime I can move 10 photos at a time, the next time I can only move one photo and sometime no photos will move.  I also have trouble downloading photos to the internet.  I was using a MacBook Pro and had no problems like this.  I then upgraded to the MacBook Pro with Retina Vision and this is the computer I am having problems with.  Can anyone please give me a suggestion in how to fix this problem. THANK YOU.

    iPhoto problems should be posted in their forums.
    I also have trouble downloading photos to the internet.
    Needs clarification.  You upload from your computer to the internet & download from a website/internet to your computer.  So which are you trying to do?  Either way, sounds like a browser issue.  You need to post in the forum of whichever browser you are using.

  • Fail to build SSIS/SSAS projects via VS2012 command line (devenv.exe) with SSDT BI tool installed

    Hello,
    I installed recently released SSDT BI tools for VS2012 and I can work on my existing SSIS/SSAS projects all well in VS2012. But when I try to build my SSIS/SSAS projects via the command line of VS2012, such as
    devenv.exe mySolution.sln /rebuild Release /out "C:\temp\buildLog.txt"
    I will get the error like below in the log file.
    Error: Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED))
    Is this a known issue? If yes, any fix has been planned?
    Thanks
    Jimmy

    Hi Jimmy Jin,
    This sounds like .NET framework problem, please refer to:
    http://bchavez.bitarmory.com/archive/2007/08/23/catastrophic-failure-exception-from-hresult-0x8000ffff-e_unexpected.aspx
    http://bchavez.bitarmory.com/archive/2007/08/23/catastrophic-failure-exception-from-hresult-0x8000ffff-e_unexpected.aspx
    Thanks,
    Eileen
    If you have any feedback on our support, please click
    here
    Eileen Zhao
    TechNet Community Support

  • I am having trouble moving a video from iTunes on my PC to my iPod (4th gen).

    I am having trouble moving a video from iTunes on my PC to my iPod (4th gen). Is it a problem that it is in the "Home Videos" section? I go into the "Home Videos" sections and drag the video that I want so that the bar comes up, move it over to the device and let go. All that happens is it flashes a few times and then nothing. No error or anything.

    Putting Your Videos on your iOS Device
    http://macmost.com/putting-your-videos-on-your-ios-device.html

Maybe you are looking for

  • Changing a vendor reconciliation account

    Dear all I am trying to change a vendor reconciliation account. When I try to save the change it gives me the warning below but it does not let me change the account. 'Account has been posted to; hold balance sheet adjustment' Can you please tell me

  • Custom Realm using LDAP?

    Hi, has anyone implemented a custom realm using LDAP? I was suprised to learn that ACLs are not supported in the LDAPRealm. Our corporate direction is to have a central LDAP security store - including ACLs. Unfortunately the LDAP server is MS SiteSer

  • How to configure sender mail adapter

    Hi, My scenario  Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this?? and can anyone suggest any blog as how to configure sender mail adapter. Kindly help Anu Singhal

  • Problem with currency display

    Hi everybody! I have problem with DW8 and ASP. The code : <%= FormatCurrency((rsProducts.Fields.Item("price").Value), -1, -2, -2, -2) %> And on the page it is looks like: 867,00?. And it should look like $867.00 The field in Access set to number. I a

  • Process chain execution using program

    hi, i want to run process chain 10 times using a program. can any one tell me how to write a program in pc in order to run the chain 10 times. any example of running the process chin using program .any nice code will be really useful please suggest m