Trouble using a Curve 9300 for personal not business

Would appreciate some help as I have just bought a Blackberry Curve 9300.
I cannot send normal SMS, I can receive them and reply but when I compose and send they do not reach.
The top of the message box shows Text Messages instead SMS,
Any idea about this? in the manuals does not show about this problem.
Regards
Anxo Lobos

Hi there,
Well it was none of the issues neither with GPS nor server, it was basically that to send a SMS will have to do it with more clicks than on the IPhone4 or Nokia C1, in my Iphone4 I can access even my hotmail without special data plans from the carrier but guess that I am just experiencing with Balckberry to see how it works before deciding for longterm use.
Regards
Anxo Lobos
Spain

Similar Messages

Curve 9300 Blackberry Enterprise not available

Hi everyone,
I am currently using the Curve 9300 and I am not able to use my work email with the Blackberry Enterprise software. When I go to settings --> advanced system settings (which it says has enterprise activation) THERE IS NO ENTERPRISE ACTIVATION OPTION...
I also go to the set-up wizard and click email and my only options are yahoo, gmail, aol, windows live. There is no option for Blackberry enterprise.
Please help!!! Thanks in advance

Hi and Welcome to the Community!
Here is a KB that discusses that error:
KB10192 No Enterprise Activation icon is present on the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Curve 9300 3G will not switch on please HELP!!!!!

Had my bb curve 3g for just a few months now love it or at least loved it till it broke on me. It was working fine and one day just went to a blank white screen so i did a battery pull still white screen. It was a gift so cant just send back to shop for repairs or replacment. After a couple of days of white screen i noticed it was off so i went to charge it but the red light did not come on and the phone would not turn on either. Can anybody please help me.
If it helps at all im on O2uk and os 5 thanks in advance.

Hi,
1. Remove battery for 10 min, then switch on device.
2. Connect to start charge and wait for 50-60 min. If battery fully drained it must charge for minimum amount then device is switch on.
3. If you still have white screen it' mean that OS in your device damaged and must be reloaded
4. Here step-by-step instruction how to reload OS with separate way (if one way have trouble, try another)
5. Also there are possibility hardware problem, which mean than must be repaired
Be sure to click Likes! for those who have helped you.
If your query is resolved then please click on “Accept as Solution”.

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

"comments" tab in bridge for personal notes on a photo or file.

for psd or AI files, or jpegs, maybe in the keywords or metadata tab or another tab, a box for typing notes "comments" about that particular photo or artwork, so I can note to self about areas to remember in an artwork, why I liked them, or things I needed to remember, I have so many sketches now there are so many little parts of each that I want to make notes on.
It would also be useful to have this comments box available to the right or left of the image in the space bar full screen view,
And in full screen view once zoomed in with scroll wheel, perhaps right click to pan drag the image updown, left/right,
With sections in bridge: Folders, Preview, Content, when I start my pc and open bridge it loses the formatting layout of the section widths that I set previously, I have to resize the spacing between sections, can we set bridge to remember previous opened spacing of the "essentials" section.

also in addition to a comments section, ability to drag or draw on circles or arrows to highlight areas I want to focus on in those sketches, A little like "snag it" editor.

Curve 9300: Middle sensor not working

Hello all..
Quite a while ago the middle button on my curve 9300 started behaving tempermental, I would have to press it hard to get a response from it. Now it's stopped working completely! Is this a common flaw with blackberrys because i've heard it's happened to other people also. Advice greatly appreciated!

Yes this is a common problem. I have just had the exact same fault on my own 9300, the best solution is a replacement trackpad. I got one off eBay for £3.95 and fitted it myself, problem solved.
"Olny two tihgns mtater wehn cmospnoig a BBm mssaege.... as lnog as the frist and lsat ltteres of a wrod are in the rghit pacle, the biarn wlil siltl rcoeginse the wrod... So mcuh for seplclhcek!!!"

Trouble using the instrument driver for the "hp8753b"

I am using the instrument driver for the "hp8753b", specifically the "collect and display data" driver. I manually set my settings to the analyzer and run the VI (i.e. set start frequency to 500 kHZ and stop frequency to 1 GHz), when the VI runs with the "collect and display data" it defaults to start frequency 1 GHz and stop frequency to 3 GHz. I have tried to modify the driver to only collect data and not to modify any settings on the analyzer but I run into errors. Any help on this is appreciated.

Hello,
I have installed the instrument driver you mention in your post. I am looking at the Collect and Display Data.vi, however I need more information from you to determine why your sweep is defaulting back to 1GHz-3GHz.
When you say "I manually set my settings to the analyzer" are you making these settings directly on the analyzer? The Collect and Display Data.vi seems to read all of the settings from the hardware, I did not see any configuration in the VI. What modifications were you making to the VI and what errors were you getting?
Can you see the range on the instrument? If so , can you determine at which point the range defaults back to the higher range? Running in highlight-execution mode in the VI and running NI-Spy (Start->All Programs->National Instruments->NI-Spy) to perform a capture of the GPIB commands can help to determine at what point the errors are occurring. It will also let you see if there are any commands being sent which cause the instrument to be reset.
Jennifer O.

Using Time Capsule only for Backup, Not Attached to Modem Network

How do I use the Time Capsule for backup without attaching it to the Internet?
I have a slower Airport already attached to my cable modem. I don't want to slow down the Time Capsule by attaching it to that network, and I don't want the Time Capsule out in my living room by the modem. If someone takes my computer, I don't want them taking my only backup of it too.
I want to put the Time Capsule in a closet or an attic, as many people do now.
How do I get it to function independently of the Internet, though? Would seem easy enough. I want to just use the backup function, but not sure if it can be set up without connecting to a modem. If that's true, why on earth would Apple shoot its backup solution in the foot like that? Hope it's not the case.
Any guidance out there for doing this or confirmation that it's impossible?

Yes, TC will work without an internet connection.
Your issue with not have the TC network connect to your existing network means you have TWO independent networks. However, your Macs have ONE Airport card; therefore, you can only be logged onto either your internet network or your TC network. Therefore, you would need to manually change your Airport settings to log onto the TC network to access it or maybe an additional network card on your Mac (I don't know if this is possible). BTW, you will need to set up the TC to Create a wireless network.

HT4623 I'm new to using apple products, recently was asked to consider using a ipad mini for my specific business needs. Does anyone use the mini for their business? How does it work for you?

I'm new to using the apple OS. Recently had business partner buy an ipad mini, was thinking of buying more for our businesses. I'm used to using Windows Office products for my reports, wanted to know how apple's Pages, Keynote and Numbers compared and whether they could be used on the ipad mini.

I have asked a moderator to provide assistance, they will post an invite on this thread.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Wiping corporate bb Curve 8330 for personal use

Hey guys,
So a friend of my father's passed on his BB Curve to me after I lost a phone. I'm just realizing it's set for corporate use so I can't set up a personal email or download certain apps I want. I have performed a wipe of the phone already, but all it did was delete the previous owner's information and things, not reset the phone to factory settings.
Is there a way to make this phone work for my personal use? Or do I just make do for now? Thanks so much in advance!

So, while this was all very helpful, I realized if I called a Verizon store and gave them my phone number and account password, they could re-set it over the phone for me in about 3 seconds...
Thanks anyway!

Using Verizon Messaging and people are not receiving my texts NOR am I receiving texts that were sent to me! Went to old iphone and disabled imessaging but still not working. I'm a big texter for personal and business and am ready to go back to iPhone.

Just got the Samsung Galaxy s5 and am very frustrated that I am not receiving text messages that were supposedly sent to me. Also, it says 'sent' but it is never delivered. Or it might get delivered but mine still just shows being sent. I re-started that phone and disabled my texting on my old iphone as some have suggested. I'm ready to go back to the iphone just because of this issue. Please fix this Verizon!

I'll tell you it is some marketing coup that a problem Apple has created and has control over is being passed off on Verizon.
This problem is the result of you migrating from iMessage, a messaging platform controlled completely by Apple, back to a more mainstream messaging system of SMS/MMS. Verizon has no control over other iPhones "thinking" you are still using iMessage. NOTHING Verizon can do will fix this problem.
Try texting the word "stop" to 48369. Others have reported this has worked. Doing this should de-register your number with the iMessage system. You should receive a confirmation reply. It may take a day or 2 for other iPhones to completely register that your number is no longer associated with iMessage. You can also try calling Apple support and let them know you are not receiving messages from iPhone users after switching to an android phone from an iPhone.

Curve 9300 synching personal contacts has blocked work email address

Hi,
I administer the cell phones for a small company. One of my new users sucessfully set-up his new BB Curve 9360's email with his work address last week. Over the weekend he synched his new phone with the contacts on his outlook at home which is attached to his personal email.
At first he could not send an email with his blackberry as it was trying to send them from his personal address. He added his personal email address to his new blackberry but now all the emails he sends are from that address.
Ideally, he would like to have all of his contacts on his new phone and have only his work email come to his phone.
Thanks for the help,

Thanks for the additional information.
I did go to our Pipex account and set up mrs.yellowtriumph as an alias for the [email protected] account.
So now if go to a computer and send an email to either [email protected] or [email protected] - then 'yes' the email does get through to the [email protected] account ok - so the alias is clearly working ok.
I thought this was the answer. So, We went to the Blackberry 'set up email accounts' page on the handset and tried to set up an email account for the alias ([email protected]) using the password for the 'abc123' account. However, when the Blackerry 'went off' to check that this account existed (|I think that's what it does?) it came back with an error message along the lines of something like - unable to confirm/access? this account.
Looking at the PIpex information, it looks as though the alias faciity works on a 'day to day' basis - but if you actually want to access the account (which I presume the Blackberry is when it goes away to check the account) then you
have the use the 'real' account name ([email protected]) - so its a vicious circle really and we end up back at square one because the Blackberry cannot interrogate the [email protected] account during the set up phase.
I am not familiar with BIS? Is this something you do/access via the internet? There seems to be no way to do this on the handset itself.
Any info gratefully received and we appreciate the time you have taken so far.

2630 trouble using central scroll key for arrows

I just bought a 2630, and I am having a lot of trouble getting the central scroll/navigation key to work as arrows. It seems to be really difficult to click it at the four edges, for the four directional arrows, and have it not think I am just pressing it in the centre to do a selection.
I can get it to work some of the time by pressing with a fingernail at the very edge between the button and the surrounding part of the phone, but it just doesn't seem reliable.
Any suggestions? Others having this problem? (I haven't seen other postings on this yet, which really surprises me.)

OK, I figured this out. I had misinterpreted the illustratoins in the manual to mean that you do the arrow keys by clicking on the actual center select buttton, but towards the edge of that central button. In fact, there is a separate rectangular scroll button surrounding that central button, which is what you use for the arrow keys.
Sorry for the dumb newbie to cell phones question, but maybe it will help someone else!

I am having trouble using program lass password for security of my passwords

need help using had no trouble on chrome

Please see LastPass support for help with their addon for Firefox. <br />
https://lastpass.com/support.php?lpnorefresh=1

Legal question - Am I permitted to use the student version for personal business while studying?

Hello.
I am currently a digital imaging student and have a student subscription to CC. I am required to use Photoshop, Bridge, Lightroom etc quite a lot.
We have started a "freelance photography" unit and we are being encouraged to actually start/register our own businesses.
I am curious about this... If I was to start my own photographic/imaging business and got some work, would I be able to use Photoshop etc for this work with only the student membership or would I need to upgrage/repurchase another subscription?
I could wade through the legal documents but this information does not seem to be very readily available and I'm hoping to fast-track an answer. I will need to pass on the information to my teachers, as well (they can be a little vague on specific details at times...).
Thanks for any information about this.
Daniel.

Luis,
That's an entirely unhelpful response.
1. The computers in question are not "privately owned".
2a. The software licensed on those computers is licensed to someone else.
2b. The software would actually be licensed under an "educational institution" license not the "student" license.
I'm asking here because its very likely that my teachers wouldn't know and it would probably take the IT department quite a while to tell me - It'd be more than likely faster to read the legals myself, if I was able to find them.
I'm hoping that someone who knows the specifics can inform me.
Daniel.

Trouble using a Curve 9300 for personal not business

Similar Messages

Maybe you are looking for