Trouble with QT PRO

I need help converting WMV files. I know that it's suppose to be possible with PRO. What do I do? Need to put them on my iPod.

I haven't heard of any apps that go directly from WMV to mpeg. You will probably have to first convert the WMV to something like uncompressed avi or perhaps DV Stream. You might want to look at Movie Maker and see what file types it will output. I have never used it so I am not sure what the input and output formats are.
There are a number of Windows program to make mpegs, once you get the file in a format that these apps will read. Hopefully someone here will be able to give you more info than I can. The only Windows programs that make mpegs that I have used (in Win98SE) only take input from avi format, so I can't help you further in this matter.

Similar Messages

I keep having trouble with my pro it keep asking me password for my yahoo account

I keep having trouble with my pro it keep asking me password for my yahoo account

These are user-to-user forums, you are not talking to Apple here - I've asked the hosts to remove your phone number from your post.
If you can't remember the answers then go to Express Lane and select 'iTunes' from the list of 'products' in the middle of the screen.
Then select 'iTunes Store', and on the next screen select 'Account Management'
Next choose 'iTunes Store Account Security' and fill in that you'd like your security questions/answers reset.
You should get an email reply within about 24 hours (and check your Spam folder as well as your Inbox) - but some recent posts are saying that Apple have temporarily suspended the reseting of security question/answers whilst account security processes are improved, so it may take longer.

Capturing Troubles with Premiere Pro CS5.5

Hello!
I am fairly new to Premiere and I'm having a little trouble with the capturing option.
I have Premiere Pro CS5.5, a MacBook Pro (13 inch), a Sony HDR-CX 110 camera connected to the MacBook with an HDMI cable and a HDMI displayport adapter.
I think I have everything I need to get it connected but it seems that whenever I select capture the window that pops up tells me that my device is offline.
I have a 13 inch MacBook Pro. I bought it in August of 2010. I have a Sony HDR-CX 110 camera. I have it hooked up to a HDMI Displayport adapter via a HDMI cable and the camera is plugged into the wall and turned on playback mode. I know the displayport works because I have a dual monitor set up and the adapter works because I have connected my TV to my Mac so there should be nothing wrong with the adapters and ports. But for some reason the camera doesn't appear to show up whenever I try to do this capturing option.
The camera's box does say "compatible with iMovie" and I have been able to import footage I collected without the camera plugged in to the computer, such as a guitar performance and an interview. That process was pretty simple and was connected to my computer via a USB.
Now, I think that maybe I'm just trying to do something more advanced with the camera and the camera can't do it. But if I am wrong (and I hope I am) I don't where to go from here? Any help would be so greatly appreciated!
Thank you =)

That will only work if your camera HAS a firewire connection... I think for Mac it is call iLink, but since I'm Win I'm not sure about that
Just do what was said and copy the folder to your hard drive and import from there

Trouble with MacBook Pro finding AirPort networks

I recently bought a new (refurbished) MacBook Pro (15", 1.83GHz), to replace my old iBook, which was one of the early white models, circa 2001.
Everything about my new computer is wonderful, of course, except that every time I boot up, wake from sleep, or turn on the AirPort, it takes up to a full minute for the AirPort to find any open networks. This happens at school (where there are AirPort base stations all over the place), at home (where we have a Belkin router, and several neighbors have others), and at my parents' house (where they have a linksys router). It doesn't seem to matter whether the networks use encryption or not, nor how close or far I am from the nearest router. If I know the name of a nearby open network and type it in, I can get it, usually. On my old iBook, I had a little trouble with some of the networks at school sometimes, but never with this kind of delay across the board, and certainly never at home nor at my parents'.
Also, at home, when the the AirPort finally does find the available networks, it NEVER chooses my router first, even though it's the only one in the neighborhood that I listed under "Preferred Networks."
I've read some similar posts, dealing with problems with accessing encrypted networks, but nothing seemed to address my particular issue. It might be a defect with the AirPort or firmware, but I wanted to check, first.
(Oh, and I'm not a complete newbie, but tech-speak often goes over my head. Please keep it simple.)
Thanks!

This is how I fixed the problem on my MBP.
Go to Macintosh HD > Library > Preferences
Delete the folder SystemConfiguration
Go to System Prefrences > Network > Show+Network Port Configuration. Check Airport and Built-in Ethernet and make sure Airport is on the top of the list.
Reconfigure your wep passwords and it should work. Worked for me. Also, you will have to redo your power settings.
Regards,
David Rodriguez

Trouble with Trajan Pro in Flash CS4

Hi there
I have been having trouble with fonts on my Macmini PPC. I downloaded FontNuke to delete the font caches, which worked to an extent, but no matter what I try, Trajan Pro just will not show up in the fonts list in Flash. Trajan Pro is installed on my system in /Library/Fonts and ~/Library/Fonts and still it won't show up in the fonts list. Isn't Trajan Pro an Adobe font after all?
Has anyone else had this problem? How did you solve it? I would appreciate any help.

Might be Postscript related.
Try to install ATM: http://www.adobe.com/products/atmlight/

Trouble with MacBook Pro To TV connection?

Having purchased a DVI to HDMI adapter and connected my MacBook Pro to my TV using this adapter and an expensive HDMI cable, I still cannot get a signal to my TV.
I have selected the correct input channel using my TV remote, but still get a 'No Signal' message from my TV. I have tried running through the the other inputs, just to make sure, but still no signal.
I have checked all of my cable connections and they are all okay.
Does anyone know what may be my problem?
I could really use some help!

Howdy needymacuser,
First I'd recommend trying another display and/or cable/adapter (if possible) to verify that there's no issue with either of those. If those check out or aren't an option, I'd recommend resetting your MacBook Pro's PRAM and SMC.
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

Bluetooth trouble with Mac Pro

Hi
I have recently bought a D-Link DBT-120 Bluetooth Adapter for my Mac Pro and i am losing connection with my devices on waking the Mac Pro from sleep, both my Logitech Bluetooth Mouse and a Jabra headset. Typically I need to disconnect and reconnect the adapter before they will work again. Does anyone know what i can do to get this working properly. I get the same issues whether i plug the adapter into the front of the Mac Pro or the back of my Cinema Display which is ideally where i would like to connect it.
thanks
nick

Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe

CS5: Having trouble with HDR Pro.

I just got my copy of CS5, and tried HDR Pro. The main HDR Pro screen cuts off at the bottom, hiding (presumably) the OK and Cancel buttons and whatever else is there. I have to Force Quit my way out of CS5. Other CS5 screens that I checked show no such problem. CS4 and PSE8 and PSE9 never had this problem on the same computer and OS. What's going on?
I am using an iMac with OSX 10.6.8.

Any information?

Anyone having trouble with Logic Pro purchase?

I am unable to purchase Logic Pro -- it gives me an error 100 saying that they are unable to process my request at that time and to contact iTunes stores. I have had no luck with iTunes store help staff and all they do is send me links to others having same issues.
I have no issues with purchase of other apps. Just Logic Pro.
Any ideas/thoughts?
--Mo

Maybe they're about to take it off the appstore...in favour of Logic X

Trouble with Logic pro installation key.

Hi i purchased Logic studio and am trying to install it but the only serial key i can find is a pro upgrade key at the back of the booklet and when i enter that, i get another pop-up asking me to enter my original key. But i can't seem to find another key.
There are two stickers at the back of the booklet, but both of them contain the same upgrade pro key. Is it possible that they made a mistake when providing the two keys? Maybe one is supposed to the original key and one the upgrade pro key? If that's the case, then who should i get in touch with?
Cheers

Sounds like you Purchased an Upgrade version of Logic and Not the Full Version.

(Cross Post! SORRY!) Having trouble with Mac Pro and Vista/Boot Camp

I feel like this board is more populated, so I thought I'd post this here as well. Forgive me.
Ok, so it took me forever to install Vista. It kept saying my partition wasn't valid even after I'd format it. After restarting like 15 times it finally went through. So, it installed.
BUT, now I have two issues. When Vista starts, I get this weird jumble of like MS-DOS text talking about partitions, weird numbers, my monitors just flash and kinda go nuts with the text then at the top after like 10 second of text, it says 'booting windows vista' with more ms-dos text. Finally after 30 seconds of that, it shows me that green bar that shows up to load Vista then voila, Vista is up and running. The OS works fine, but no matter what, I go through that jumble of text. Any way to get rid of it? What's wrong with it?
Also, now that I've installed Vista, I can't get back into OS X. I have a wireless PC keyboard and a wireless bluetooth Apple keyboard, so I don't know what to do. When I go into Vista's Control Panel to select Startup Disk it says it can't load the program. So I'm at a loss. I really wanna get back into OS X!
Any help would be fantastic!!

Ok, I fixed the issue by using the wireless PC keyboard. I put the Vista install DVD in the drive and restarted the computer. The computer wouldn't recognize the OS X DVD.
I remembered that the computer would register the keyboard inputs after restarting from the Vista Install Screen, so I restarted, held down alt on the PC keyboard and it worked!
Now with the apple keyboard working, I restarted and reset the PRAM which made the computer boot into OS X by default instead of Vista.
BUT, I still get that weird DOS text every time I load Vista, and now after keeping Vista running for a few hours, it starts kinda glitching over time. It loses connection with the network (I had to physically unplug and plug back in the ethernet cable to get it to recognize the network) and for some reason in order to use my apple keyboard, I have to turn it off and on when I get into Vista. It's annoying.
Anywho, if anyone can help me with my Vista problems, that'd be grand :P

Trouble with Premiere Pro and what to reinstall the program.

I have a Creative Cloud membership for photographers. Now I´m starting to use Premiere Pro that is installed throught this membership. But when I upload .MOV files to Premiere Pro I get a Error message, that premiere Pro doesn´t support this file? Witch i kind of odd? I know that this is an approved fileformat. Saw on a forum that you might get rid of that problem by installing the program again. How do I do, to reinstall Premiere pro? I can only see that I can install a testversion but I´m not interested in this. Because I already have a membership. I did change one of my disks in my desktop a few week ago, and maybe that´s whats causing this problem.

Premiere Pro is not part of the photography bundle, so beyond the trial you won't be able to use it. The rest we can't know. You have not provided any system info or otehr details like the source and type of your MOV files and whether you can e.g. import them in Photoshop. MOVs are Quicktiem files, so if you haven't even installed that, this is the first thing to do.
Mylenium

Having trouble with macbook pro dock at the bottom of the screen

I have a 13'' macbook pro, and i now have 2 different docks at the bottom of my screen. One is functional and the other one is not. How to i get rid of one of the docks?

Please post the age of your MBP, IE what year is was made, IE what year Model is it. and also as above a image/picture of the screen (a Screen Shot may not do it if the second Dock is some type of Ghost entry).
Other then that you have some type of software corruption or hardware failure going on. There should never be a second Dock at the bottom of the screen. So there is No easy fix for this problem. It may be hardware and if so that hardware would need to be replaced. Or is could be software corruption and in that case a Wipe of the drive and reinstall may be needed.

Trouble with QuickTime Pro Activation

I have upgraded from QuictTime 7 to QuickTime Pro on Snow Leopard. The instruction for activation is to click on the QuickTime icon in System Preferences. However, I do not have a QuickTime icon in System Preferences. As such, how can I activate QT Pro?

As Kurt says... " Fill in the fields according to the email confirmation you received when you purchased QT Pro."
This is my Image...
See this Support Document:
http://support.apple.com/kb/HT3678
And this Link... Should you need it:
http://support.apple.com/kb/DL923 Software Update
Cheers,

Is anyone else having trouble with surface pro 3 + kinect v2?

I'm running a cpu intensive Kinect v2 program on a surface pro 3 (all updates installed). It typically consumes about 50% of the processing when the cpu frequency is 100% (all CPU and networking, no graphics)
The problem is that sometimes when I run the program the cpu frequency (as reported by the resource monitor) does not move from it's idle state of 33% so my program chokes. If I remove the power cable, the cpu frequency immediately jumps to 100%. If
I then replace the power cable the cpu frequency will stay at 100%. My program will keep on running fine for a while and then the frequency will drop low again - I can then repair it by removing or replacing the power cable.
Obviously this program is intensive and the fans turn on to cool things down, so I originally thought it was a overheating problem, but the problem can occur immediately on running the program when the surface has just been booted and is completely
cold, or not occur when it's hot. I've tried the power options (not many on the surface) and they have no noticeable effect.
Does anyone have any suggestions as to how I can get the max performance from the cpu and keep it there? Why should the power cable have such an effect?
thanks
--Kim
--Kim

Are you running a WPF application or a c++ application? Try running any of the D2D samples at the same time, to see if that changes the behavior. When you boot the machine was power connected at the time? There are different hardware states
a system can be in based on running on battery vs plugged in. Is the system charging the battery at the time it is plugged in?
If on battery the assumption is you need to conserve which the operating system/hardware will operating in an energy efficient state until which time it is forces to run 100%(games or other graphic intensive work). CPU bound operations only may not trigger
the step up to full speed depending on how the operating system is handling the specific processes. The nature of WPF it was designed to update less often since line of business applications typically don't change the screen that often, so it was designed
to be more efficient that way. Where D2D/D3D applications run at full speed no matter what.
Carmine Sirignano - MSFT

Trouble with QT PRO

Similar Messages

Maybe you are looking for