Troubles with configuring static port for Certsrv.msc

I am trying to use certsrv.msc to connect from my workstation to the CA for administration purposes. Workstation is Win7, CA is 2008 R2 Enterprise running Enterprise Subordinate on a dedicated box.
I configured a static DCOM port by following this article, including bouncing the service and also rebooting the CA box:
http://social.technet.microsoft.com/wiki/contents/articles/1559.how-to-configure-a-static-dcom-port-for-ad-cs.aspx
The static port was opened in the firewall from my workstation to the CA. We also found that TCP 445 was required, so that has been opened as well, port 135 & other ports normally needed for autoenrollment should be open. Sniffing the firewall
showed that a random high numbered port that is not the static dcom port is being attempted - this is the only port showing dropped packets & no traffic on the static port. On the CA I ran netstat & 'netstat -a' and am not seeing the static port
listed anywhere.
It does not appear to me that the static dcom endpoint is working properly & that it is still randomly assigning ports. We would greatly prefer to not have the whole range opened for random port assignment. Any suggestions? Thanks in
advance!

On Fri, 7 Feb 2014 15:28:32 +0000, Steve F wrote:
I am trying to use certsrv.msc to connect from my workstation to the CA for administration purposes
This is not the correct forum for this question. You should repost to:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserversecurity
Paul Adare - FIM CM MVP
"If you think you can have a nice network with ms-windows machines on it,
you
haven't run tcpdump yet." -- Alan Rosenthal

Similar Messages

Configure static PAT for port range

Hi,
could someone help with this:
we have an ASA 5510 version 8.2 and ASDM 6.4. we want to configure a static PAT for a range of TCP and UDP port. in the nat configuration window we have just to enter one port ( range are note accepted).
Thanks,

Hi,
In software levels 8.2 and below the only option is to generate a separate configurations for each port. This is easiest achieved through the CLI and using some text editor to help generate the possibly large configurations.
On ASA software 8.3 and above (where NAT format was completely redone) you have the option to use a single "nat" command to configure Static PAT for a continuous range of ports.
So your option is to either generate a separate "static" configuration for each port or upgrade the software to a newer one to be able to do Static PAT for a range of ports.
Naturally the update involves rewriting the current NAT configuratins into a new format even though booting to newer software usually converts the configurations automatically but with varying success.
- Jouni

Configure client ports for RTMFP

We are redesigning our Flash application to use RTMFP in place of RTMP, and we are interested in knowing exactly which ports our client app will try to use when connecting with RTMFP. From reading the documentation provided, it appears that the hostport element of Adaptor.xml allows for configuration of ports for Flash Media Server. Will changes to these port values have any effect on the ports being used by the client?

Hi,
Keystore Entry:
Login to Visual Admin --> Server --> Services --> KeyStorage --> TrustedCAs --> Load --> Select the location where you have stored the certificate on your local system
Load function is used as you have already got the certificate....
Once this is done you will find an entry for your certificate in the Entries tab of your TrustedCAs section.
This is your Keystore Entry...in other words it the name of your certificate.
Keystore View:
http://help.sap.com/saphelp_webas630/helpdata/en/16/c0503e1dac5b46e10000000a114084/content.htm
Are you going to consume Logon tickets of the Third party system (which is other than SAP J2ee engine of your XI)? If yes, then you may also need to do some more settings in the J2ee Engine.
Regards,
Abhishek.

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new.

Anyone having trouble with the new update for 2010 mac book air 10.8.2?

Anyone having trouble with the new update for 2010 mac book air 10.8.2 ? My 2010 Macbook Air has crashed 15times since the 10.8.2 update. Have only once since owning it.

Turned out the hardware was bad. Apple exchanged it for a new Mac Air and the new trackpad works great. Thank goodness it was a defect. If the trackpads all worked like that I would have been bummed.

Having trouble with the security questions for iTunes. Tried to reset them, but the mail from Apple never comes . . .

Having trouble with the security questions for iTunes. Tried to reset them, but the mail from Apple never comes . . .

You need to ask Apple to reset your security questions; ways of doing so include clicking here and picking a method for your country, and filling out and submitting this form.
(96290)

I need a laptop with a RS232 port for PLC communications

I need a laptop with a RS232 port for PLC communications. Now all laptop on the
market have no RS232 port. Some laptop has a PC express card slot. I find a
PCMCIA to RS232 RS-232 Notebook Serial I/O adapt Card on eBay but I don’t know
if it can work with PC express card slot. Please give me some advice.
Thank you,
Alfred

Hey I have same problem. No PCMCIA No PCIe No USB converter are usefull
I recommend you to use IBM Thinkpad Laptop with DockStation (adv Mini Dock 2504-10U)
This Dock Sattion have real RS232 port

I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In

I Am Having Trouble With Mozilla Firefox. For Some Reason I Can Not Type Any Thing In. I Can Not Type Anything Into Yahoo Search Or Any Where I Need A Password. Anytime I Try To Type Anythink In It Locks Up Firefox The Same With Thunderbird Can't Write An Email Thunderbird Locks Up When I Start Typing. My Roboform Will No Longer Fill In The Forms. I Have Uninstalled All Three Programs Three Times. Can You Give Any Help.
Thank You

Hi,
Sounds like you have two problems there. One for Firefox and one for Thunderbird.
We can help you with the Firefox question but your other Thunderbird question will have to go into the Thunderbird queue. You can create a new Thunderbird question by going to [/questions/new/thunderbird]
Can you try to start Firefox in Safe Mode to see if Firefox works properly with no error? You can start Firefox in Safe Mode below:
*'''Windows/Mac''': Go to Help > Restart with add-ons disabled
*'''Linux''': Run ''firefox -safe-mode'' in the Terminal/Konsole
If Firefox opens up fine with no problems, it's probably one of your extensions that's causing the issue. You can re-enable your add-ons one by one until you find the one that causes the issue upon being re-enabled.

I am having trouble with the reminders app for iPad mini on iOS 7. When I. hit add list it doesn't add a list. I've tried everything. Thank you.

I am having trouble with the reminders app for iPad mini on iOS 7. When I. hit add list it doesn't add a list. I've tried everything. Thank you.

Device not recognized by iTune
http://support.apple.com/kb/TS1591

I am having trouble with a firmware update for my 40ex500 tv. Downloaded update to thumb drive but

Will try again. Am having trouble with a firmware updat for sony 40ex500. Downloaded update to my thumb drive but when inserted in the usb slot on the tv, the sequence to update the tv does not complete. Various service reps have led me to you for resolution. Please advise? Bill Becker

I have a Macbook with Tiger, and OS x 10.4. I had to install a new hard drive.
Run Disk Utility /Applications/Utilities
First, go to your Apple menu then click Software Update...
If no updates are available, check the startup disk using Disk Utility.
Using Disk Utility to verify or repair disks

Problem with Configuration of GP for Adobe Forms

Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, Mariano

Hi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you***************

SQL Server 2012 - 3 SQL clustered instances - one default/ two named instances - how assign/should assign static ports for named instances

We have two physical servers hosting 3 SQL 2012 clustered instances, one default instance and two named instances.
The default instance is using port 1433 and the two named instances are using dynamic port assignment.
There is discussion about assigning static port numbers to the two named clustered SQL instances.
What is considered best-practice? For clustered named instances to have dynamic or static ports?
Are there any pitfalls to assigning a static port to a named instance that is a cluster?
Any help is greatly appreciated

Hi RobinMCBC,
In SQL server the default instance has a listener which listens on the fixed port which is TCP port 1433. And for the named instance the port on which the SQL server listens is random and is dynamically selected when the named instance of the SQL server
starts.
For Standalone instance of the SQL server we can change the dynamic port of the named instance to the static port by using SQL server configuration manager as other post, however, in case of the cluster, when we change the port no. of the named instance
to the static port using the method described above, the port no. again changes back to the dynamic port after you restart the services. I recommend you changing the Dynamic port of the SQL Server to static port
on all the nodes , disabling and enabling the checkpointing to the quorum.
For more information, you can review the following article about how to change the dynamic port of the SQL Server named instance to an static port in a SQL Server 2005 cluster.
http://blogs.msdn.com/b/sqlserverfaq/archive/2008/06/02/how-to-change-the-dynamic-port-of-the-sql-server-named-instance-to-an-static-port-in-a-sql-server-2005-cluster.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Trouble with Firewire 400 ports

My firewire ports seem to be working intermittently. Sometimes my external drive will hang when I am trying to back up data to it, and nothing works except to unplug the drive (ouch!). I have tried Force Quit and even tried to shut down the computer. When the drive is hung, I can't get the computer to shut down. The drive light is on, like data is being written, but nothing is going on.
I suspected the drive and tried to use Disk Warrior, but Disk Warrior crashed before it finished rebuilding the directory.
The drive works fine on my other computer, a PowerBook G4, 17 inch running OS X 10.4.
I repaired Disk Permissions, but that doesn't help.
I have several other FireWire drives and they have the same sort of problems when connected to my iMac.
Is there some program I can run to check the FireWire ports?

Try this:
First:
1. Shut down the computer.
2. Disconnect all FireWire devices and all other cables, except the keyboard and mouse cable(s).
3. Disconnect the computer from the power outlet and wait for 3 to 5 minutes.
4. Plug the computer back in and turn it on.
5. Reconnect the FireWire device(s) (one at a time if there is more than one) and test. Test with each FireWire port if you have more than one.
Zapping the PRAM:
After the startup tone, hold down <commandd><option><r> until 3 additional startup tones are heard, then release the 4 keys.
Or you can try resetting the NVRAM
After the startup tone, hold down <command><option><o><f> until the text screen is visible. When text can be entered, type the following commands, followed by the <return> key (there are no space characters in each command):
reset-nvram
set-defaults
reset-all (the Mac will boot up after this command is entered)
Letr me know how you make out,
Miriam

Trouble with submit button working for some clients

I have an interactive order form on-line http://www.naspairshow.com/seating%20form. pdf and most people aren't having a problem with it. A few say it goes nowhere when they push the email button. I've suggested they save it as a renamed pdf and they say it won't let them do anything but print it. At this point I'm having them give me the info over the phone, but what needs to be done on their end or mine to make it work?
Operating System: Windows XP Adobe pro 7

Graffiti is pointing out one of the major problems of using e-mail submission (Adobe says little about this major drawback - same type of problems as often found with HTML forms, but for a different reason). To use e-mail with PDF forms, the client generally has to have a MAPI e-mail client that they can use. Many folks do not have such and that is the hang up. You have 3 choices in that case. 1. As Graffiti mentions you can activate Reader Rights to allow them to save the file with data and e-mail it to you (a manual process and limited to 500 in the use aspect). 2. You can set up a web script on a server that the clients submit to (the best way). 3. You can set the form to submit HTML data and submit to a cgimail or formmail script on a server (many servers have this option available). You can even go as far as saying there is a forth option to convince the customers to activate a MAPI client on their machine - probably a bad idea.

Help please with a Static Initializer for ImageIcons inside Jar Files

At the moment I'm playing around displaying XML using A JTree
I am subclassing DefaultMutableTreeNode, and want it to have some default Icons set up....
Sort of like this:
public class XNode extends DefaultMutableTreeNode
    public static final ImageIcon icon;
   public static ImageIcon getIcon()
        return XNode.icon;
}The only thing is that for the life of me after trying various things and searching these forums and google:
I can't work out how to write the static Initializer for the ImageIcon.
The ImageIcon will need to be created using a URL, cos it will be inside my jar file.....
the usual...
           URL url = this.getClass().getResource("/images/Exit16.gif");
           ImageIcon Icon = new ImageIcon( url );but I wanted these Icons to be class members..............
Could someone help?
}

DrClap " I don't understand why you put Class.forName in there either"
A: Because I don't really know what I'm doing.
I will try that suggestion.
At present I have this:
     static ImageIcon loadIcon;
     static
          try
            loadIcon = new ImageIcon( Class.forName("cis.editor.xml.nodes.AlNode").getResource("/images/Exit16.gif"));
          catch( ClassNotFoundException cnfe )
               System.out.println("ClassNotFound: " + cnfe.getMessage() );
     public static final ImageIcon defaultIcon = loadIcon;
     static
          try
            loadIcon = new ImageIcon( Class.forName("cis.editor.xml.nodes.AlNode").getResource("/images/tree_folder_major.gif"));
          catch( ClassNotFoundException cnfe )
               System.out.println("ClassNotFound: " + cnfe.getMessage() );
     public static final ImageIcon commentIcon = loadIcon;
//.......... ANd so OnWhy? Because do far it was the only way I could get it to compile.
And It works..
However it's a real abortion.. codewise.
I need to load about 16 Icons that the various subclasses can 'use'
DefaultTreeCellRenderer - must do somethng similar because it has a bunch of Icons to "Pick from",
Only How is that done 'properly' ?

Troubles with configuring static port for Certsrv.msc

Similar Messages

Maybe you are looking for