Trying to capture a URL String after a redirect.

I'm trying to capture a URL string after a redirect. Is this possible? Am I going at this the wrong way?
They code below always comes back; isURLInaccessible: true
I've tried mutliple attempts of using Security.loadPolicyFile, still no luck.
Both the URLRequest domain and the redirect domain have crossdomain files with access set to *.
[CODE]
public function init():void{
          var loader:Loader = new Loader();
          loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressHandler);
          var request:URLRequest = new URLRequest(myVideoURL);
          loader.load(request);
private function progressHandler(pe:ProgressEvent):void{
          var info:LoaderInfo = LoaderInfo(pe.target.loader.contentLoaderInfo)
                 if(info.isURLInaccessible){
                     trace("isURLInaccessible: " + info.isURLInaccessible);
                 }else{
                    trace(info.url);
[CODE]

use an Event.COMPLETE listener and listener function to check that property.

Similar Messages

  • URL changing after been redirected to another component ....

    Hi,
    I have modified to display additional page for every authenticated user before displaying the portal home page ..
    here is the code ..
    IPortalComponentURI uri = request.createPortalComponentURI();
    uri.setContextName("com.sap.portal.navigation.masthead.TermsAndConditions");
    String Url = uri.toString();
    action=\"servlet/prt/portal/prtroot/com.sap.portal.navigation.masthead.TermsAndConditions\">");
    response.write("<form id=\"redirform\" method=\"post\" target=\"_parent\" action="Url">");
    response.write("</form>");
    response.write("<script>document.getElementById(\"redirform\").submit();</script>");
    Terms and conditions page is being displaying but the URL looks like ..
    ...../irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.masthead.TermsAndConditions
    but i want it to be as  ..../irj/portal ..
    how can i achieve this.
    I want to make my page to be appeared before displaying home page.

    HI,
    Long visible URL doesn't ok to the management.
    Initially i tried to direct to the T&C's page from masthead page using response.include(.., ..); but in that case T&C's page is being displaying only in masthead part i want it to place on the top of whole page.
    so as a next choice i'm using <form> tag and in action="irj/servlet/prt/portal/portalroot/com.sap.portal.termsandconditions.Component" but unfortunately long visible URL taking place in the address bar.
    Can't we find the place where exactly the control being passing on to default frame work page? if yes then i can redirect every one to my component first and after checking can be redirected to default framework page.
    I read some where that by changing "com.sap.portal.desktop.url" we can achieve this. but don't know where should i assign my URL to that attribute in session object, even don't know whether it will work or not?
    Thanks
    MMK

  • Help in getting the URL string.

    Hi:
    In my project, when click on a Product link it will go to the login page asking for name and pwd . I passed the URL of the page where the link is present to the login.jsp . In login.jsp , I captured the URL querystring . After clicking the submit button in the login page, I expect the control should go directly to the page where the link is present. So I use response.sendRedirect("linkpage.jsp?"+querystring);
    But it says NullPointerException in linkPage.jsp because the query string captured is null.
    Can anyone tell me why I get the querystring as null value.
    Thanks.

    Yes. Thanks for understanding . Here are the details:
    I have 2 pages:
    view.jsp
    login.jsp
    I try to access http://localhost:8080/view.jsp . It redirects to login.jsp for user authorization. So I do the following:
    In view.jsp:
    response.sendRedirect("/login.jsp?querystring="+sq+"&ret_page="+spage);
    In login.jsp:
    sQuerystring=request.getParameter(querystring);
    sPage=request.getParameter(ret_page);
    if (sQuerystring!=null || sQueryString!=" ")
    response.sendRedirect(sPage+"?"+sQueryString);
    else
    response.sendRedirect("defaultpage");
    When I run this pgm,it says nullpointer exception and forward() not allowed after the buffer is submitted.
    Could you give me a solution.
    Thanks.

  • Trying to capture in FCP 6.06 w/ Sony fx 1000

    Trying to capture footage in FCP 6.06 from an fx 1000.
    FCP does not seem to see the camera while it is in vcr mode and hooked up through firewire.
    I think I have FCP fully updated but don't see the options for hdv to capture. Need help with proper capture settings and any updates in codecs or software I may need.
    Read through numerous other topics but can't quite find the answers I need.
    Any help would be great
    Running a iMac with 3.06 dual core and 4gb or ram with FCP 6.06 and osx 10.5.8

    Hi
    An Amateur trying to be of help. This is a problem in several movie editors
    My general list might give a clue to Your problem too
    BTW - a very interesting Camera - might look for it - upgrade is of need to me.
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • HELP! Audio Drops Out When Trying to Capture Canon XL2 Footage

    Please help me out here. I'm a freelance camera operator w/ a Canon XL2 and several times now I've gotten calls from the editors saying they're having problems logging my footage, mainly the audio drops out quite a bit, and I'm not talking bout one second for every 2 or 3 minutes. No. It's like every 10 seconds the audio drops in and out.
    What's the deal? Two times the guy was using a Panasonic DVX-100A to capture, another time it was a SONY DSR mini-DV deck. With each incident I had to go over with my XL2 and use it as the capture device, which is a pain.
    The program they're using is FCP HD or 5. But I think even when they just play the tape in their Sony or Pany cameras, the audio may still suck.
    Help me out here, I can't be the only one with this problem.
    Thanks.
    -R

    Well Robert Swanson, I hope my post wasn't taken offensively, it certainly wasn't meant as such. The only Canon camcorder I owned was the GL1. After switching to Sony's I can honestly say it would take something significant to go back. And, I was merely relating my experiences in trying to capture from other Canon camcorders so that I know where you are coming from. However, I am interested in the HVX being the "noisest" camera on the market. I am seriously considering this camera and would be interested in a review that points this out. I would be using the hard drive recorder instead of P2 cards.
    Mike

  • Trying to capture HDV with a Canon HV30    CS4

    I am new to this HD video.Im trying to capture to PPRO cs4 and not sure what settings to use.When I first start out I have my new project set to HDV after that it takes me to new sequence panel there I have selected the preset HDV 1080p30 (Im hoping this is correct) after this I go to the capture panel there I select where to put the video and I also select HDV.When I try to capture the video does not show on the PPRO preview screen but it does capture the video and run the camera from there. The camera is set to HDV output and while its capturing it shows a fire wire symbol on the camera screen and says something like HDV out
    Just like to know if Im doing everything correct.'
    Thanks for your time

    Had you read the manual or help file on capturing HDV, you would have seen that there is no preview during capture with HDV material. I suggest you read the manual from front to cover to get acquainted with this program and watch tutorials. It will make your editing experience much nicer.

  • Error message when trying to capture video

    I am trying to capture video into FCE using a Sony MiniDV camera, the same one the footage was shot on, with a firewire connection. Every time i try to capture the footage, either using Capture CLip or Capture Now, it stops after about 10 seconds and gives me an error message that says there is a problem with my footage. I can play the footage back fine on my camera and there is no break in timecode. When i capture other footage shot on a different camera, using my Sony camera to capture, it works fine.
    I bought a minDV head cleaning tape and ran it, it didn't help. Is it possible the settings on my FCE are wrong for the particular way i shot this footage? It was shot at SP. Or could it be a problem with my camera that made the footage damaged when i shot it?
    Please help!

    Most probably a tape problem on the original recording.
    You know this information, and you know you've been doing it for years. We don't know that. We're trying to help you, and we can't see your system, what you're doing, or what you know. We have to guess, one step at a time. From what I can glean from the message, I can't see it being anything but a recording problem on the tape, or a recording problem in relation to the playback device, but those are pretty rare occurrences for cameras and decks that are properly maintained.

  • Can I pass variables in the URL string?

    I am trying to get some variables into a loaded swf at
    runtime. The variables will carry information so the swf can load
    the correct xml file. I thought we could pass them through the URL
    string like so:
    new URLRequest("testing.swf?myVar=varOne
    but it just throws an URL cannot be found error. How can I
    get variables into my swf at runtime?

    What you are doing is fine. But you will always get that
    error when testing
    the movie (Ctrl+Enter). Try it in a browser and it should
    work.
    BTW, another way of doing the same is to use a URLVariables
    object, like so:
    var req:URLRequest = new URLRequest("testing.swf");
    var vars:URLVariables = new
    URLVariables("myVar=varOne&myVar2=varTwo");
    req.data = vars;

  • Can I capture the url of the page I am on and set it to a variable??

    Hi..
    I was wondering how I can capture the url of the page that I am on and then set it to a variable??? is that possible???
    Thx
    Rich

    Try this.
    String url =request.getRequestURI();
    Hope this helps.
    Fred

  • Parse an "inputted" url string

    I am simply trying to parse a URL for a particular value
    without going through len(), left(), right(), findnocase() hell.
    Can anyone please tell me how? I feel like I'm missing some obvious
    function.
    Example:
    I only want the value of (v).
    http://www.youtube.com/watch?v=wHMZa7Qb8XI&feature=yva-title

    if v is always the first parameter in the query string, then
    you can use
    cf list functions to get its value:
    <cfset url = "
    http://www.youtube.com/watch?v=wHMZa7Qb8XI&feature=yva-title">
    <cfset v_value = listgetat(url, 2, "=")>
    if it is in varying positions in the query string, you'll
    need a regexp
    to get its value. i am not big on regexp, so will let someone
    else chime
    in with correct code...
    Azadi Saryev
    Sabai-dee.com
    http://www.sabai-dee.com/

  • Capture full URL with CF CGI variable

    I need to capture an entire URL and send it in the body of an
    email, using CFMAIL. I'm looking at my CGI variables using CFDUMP,
    but can't seem to get the entire URL string, including the
    http:// or https://. Help?

    That part of the URL is intended for the browser, and is not relevant to the server so is not transmitted with the request, so it never gets to the web server, let alone the CF server.
    If you need that info, you're gonna need to send it some other way.
    Adam

  • How can i get getwayed url string using pluggable nav in news portlet?

    hi.
    How can i get getwayed url string using pluggable nav in news portlet?
    A code just like below is what I want.
    <param value="param=http://.../portal/server.pt/gateway/PTARGS_.../http/...">
    I tryed the following, but didn't work as I wanted.
    1.<param value="<pcs:valueexpr='var'/>">
    -> transformed. but I want the prefix 'param=' in the enquoted string's too.
    2. <param value="param=<pcs:valueexpr='var'/>">
    -> not transformed.
    Any idea?
    Hiroyuki

    Hi all,
    We have HPROF functionality in our latest roadmap, so you will see that feature in our next major release called JRockit R28.
    I recommend, above from the MemLeak documentation suggested by Makiey, the following information on how to use JRockit tools.
    Performance Tuning & Profiling:
    http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/geninfo/diagnos/part_02.html
    Using JRockit tools:
    http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/geninfo/diagnos/part_03.html
    Diagnostics & Troubleshooting
    http://download.oracle.com/docs/cd/E13150_01/jrockit_jvm/jrockit/geninfo/diagnos/part_04.html
    Best Regards,
    Tuva
    JRockit PM

  • Batch Capture - Frame rate changes after first clip

    Hey everybody,
    Working in CS4 on a Mac, and trying to simply batch capture about 35 clips after all have been logged accurately.
    I'm using the DVX100A, and shot in 24Pa. So I have set up my sequence settings to DV 23.98 Fps, and 16:9 Progressive.
    Upon batch capturing (making sure the capture settings are the same) the first clip is captured at 23.98 and works fine, then every one after that 'captures' at 29.97. I say 'captures' because it says it is captured but when I try and play it in the source monitor Premiere crashes or freezes.
    Has anyone else experienced this issue? Thanks for any input regarding this issue.

    Then I changed Recording Setup to 480i/30p...My thoughts were that this would be slowed down a little.
    That is an incorrect thought. DV tape runs at 29.97fps always. Even 24p...that runs at 29.97 but has the film like cadence. If you want to shoot slow motion, you need to shoot 720p. That is a 60 frame format. You can shoot 720p24 to get 23.98, then there is a trick to get the camera to shoot 60fps and record it as 24fps. The Barry Green book that comes with the camera explains that. And that is SMOOTH slow motion.
    Now the camera ships with a 16GB P2 card. One comes in the box, along with the Barry Green book. Did you not get that? Where did you buy the camera?
    Shane

  • URL openStream problem. URL String length

    Hi,
    My problem is about length of the url string. I'm simply creating a URL and trying to call openStream() to get content. But if the length of url string exceeds 118 characters, I'm getting an exception. It says Server returned Http response code 505.
    If I try the same url string in a browser it's working.
    Thanks for all replies in advance...

    the problem solved, it was about white space not length... I didn't notice the white space there sorry!

  • WDS 2012 Black Screen when trying to capture image

    I'm currently having an issue trying to capture windows 8.1 Enterprise image using Server 2012 R2 + WDS for deployment.
    All the usual steps have been followed, images added from the install media used to set up the initial machine, DHCP configured and PXEBoot works fine for the deployment image (it loads, I get an ip, can access reminst share) but when I boot in the capture
    image I get nothing but a black/blank screen.
    Initially when I booted in to the capture image I was receiving an 0xC000000F error but by adding the network driver to the capture image it resolved that issue and it gives the blue windows logo and starts loading but then goes black. I've subsequently
    tried to add all available drives for this machine from the HP site but made no difference.
    WDS server is a hyper-v VM and the box to be capture is physical, both on the same vlan.
    Any one experienced this?

    I did not find any help with this. I was able to get a native boot.wim and install.wim to work from the installation media (with driver injection - which I must say is way easier in W2K12). However the capture did not and will not work. VERY frustrating!
    I wound up doing a WDS basic OS install then I had to manually touch 24 boxes to install the rest of the software (still not quite done after three solid days of work).
    Also, I should point out: I am targeting Dell Optiplex 790s. I'm using the PE 5.0 drivers which work fine. i also downloaded the Dell Optiplex 790 driver set and injected those as well, even though they are targeted for Win 7, not Win 8.1. 
    Interestingly, if I updated the old system bios (A05) to the new (A18) the machine couldn't even contact the WDS server. It was working before at A05 and then completely stopped at A18, requiring me to do a complete full install from installation media.
    Way to go Dell! This is why people are switching to Lenovo.
    Best,
    Bill

Maybe you are looking for

  • Dreamweaver text looks fine in Safari but not Firefox NEED HELP!!!

    Dreamweaver text looks fine in Safari but not Firefox, all my text goes out of alignment and the fonts look like different sizes. Please let me know your thoughts. Here is a link to the page I'm having problems with. http://www.alexandrasantibanez.co

  • Garageband 10 going SOOO slow...help please.

    Hello everyone, I just downloaded the newest version of Garageband (v.10) and now I've noticed that it is going extremely slow. This is a brand new iMac I'm running it on. My specs are as folllows: 27 inch model 3.2 GHz quad-core Intel Core i5 8GB of

  • Ipod wont start up / 1.1 problem??

    last night my ipod was working just fine, then i upgraded to software 1.1 then spent the whole night loading songs onto my ipod. everything seemed to work fine, when updating was complete i ejected the ipod correctly. then however when i went to use

  • Error with connecting to TEST in Financial Reporting Studio

    Test server is confirmed working as seen connecting to EPMA in Workspace. However, when it comes to connecting to Test in FRS, after changing the Test URL to Test server in the startup box, I received the following error message: "You are not authori

  • Loading data from a web service to BW

    Hi I have a web service from a company we work with, It looks like http://xxxx.info/CustomerMissions.asmx I want to take the data that the web service returns and upload it into SAP BW. We are in BW 70105. I've read about the soamanager transaction a