Trying to change OC4J 10.1.3 ports

Hi
I am running BAM 11g and OCMS 10.1.3(with OC4J).
I am facing port conflicts, and want to change the OC4J ports. How can I do this?
Please let me know.
Abhishek

Hmmm... I have certainly experienced my share of classloading problems in OC4J 10.1.3... Some other options are:
1. Explicitly set the java.library.path variable to the bin directory when starting up OC4J.
2. Create a shared library that contains an entry to the bin directory and import it into your application. There is plenty of documentation on this.
On page 3-20 in "Oracle Containers for J2EE Developers Guide 10g Release 3 (10.1.3)", there is documentation that says
"An UnsatisfiedLinkError means that a native library could not be found.
Generally, OC4J only supports configuring native libraries within RAR modules."
I am not sure what Oracle means by "Generally", there is no other help in regards to native libraries in this document.
Jason

Similar Messages

Changing oc4j port

Hi,
I have OWB and OBIEE running on the same server, OC4J of both using port 23791,
So i am unable to use both at the same time.
I tried to change the port for OWB by making changes in OWB_HOME\owb\jrt\config\rmi.xml but its not working
Changing ORMI port !!!
can someone kindly tell me the steps to change the OBIEE oc4j port.
thanks,

Hi friend,
Read the next link:
http://gerardnico.com/wiki/dat/obiee/installation/oc4j_how_to_change_the_port_number
Good luck.
Regards.

Problem when I tried to change weblogic listen port from 7001 to 80

HI! I have problem when I tried to change weblogic listen port from 7001 to 80. When I changed from 7001 to 7777 then all works ok! But why not on 80? With apache all works ok on 80 too.
I restart my weblogic server and then I have following errors.
<2009.1.4 16:02:13 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to STARTING>
2009.1.4 16:02:14 oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkPr
oviderClass
INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.
framework.wls.spi.JMXFrameworkProviderImpl"
2009.1.4 16:02:15 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
<2009.1.4 16:02:22 EEST> <Notice> <Log Management> <BEA-170027> <The Server has
established connection with the Domain level Diagnostic Service successfully.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to ADMIN>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to RESUMING>
<2009.1.4 16:02:22 EEST> <Emergency> <Security> <BEA-090087> <Server failed to b
ind to the configured Admin port. The port may already be used by another proces
s.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default". The address 85.254.224.235 might be
incorrect or another process is using port 80: java.net.BindException: Address
already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Critical> <WebLogicServer> <BEA-000362> <Server failed
. Reason: Server failed to bind to any usable port. See preceeding log message f
or details.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[2]". The address 127.0.0.1 might be i
ncorrect or another process is using port 80: java.net.BindException: Address al
ready in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Error> <Server> <BEA-002606> <Unable to create a serve
r socket for listening on channel "Default[1]". The address 192.168.0.102 might
be incorrect or another process is using port 80: java.net.BindException: Addres
s already in use: JVM_Bind.>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FAILED>
<2009.1.4 16:02:22 EEST> <Error> <WebLogicServer> <BEA-000383> <A critical servi
ce failed. The server will shut itself down>
<2009.1.4 16:02:22 EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state ch
anged to FORCE_SHUTTING_DOWN>
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
2009.1.4 16:02:22 oracle.adf.share.config.ADFConfigFactory cleanUpApplicationSta
te
INFO: Cleaning up application state
Best regards!

Debuger,
It does not matter which WLS version I am using (although I'm using 10.3, the one that comes with JDev 11g).
The problem is that SOME OTHER PROCESS on your machine is listening on port 80. Guess you need to go to the Microsoft forums to find out how you can tell what that OTHER, NOT WLS process is.
John

How to use the same OC4j server with different port number

How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh G

In the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle

I am trying to change the liferay home directory

I followed the installation document for our version of Studio (version 3.0) which says to edit the portal-ext.properties file in the WEB_INF/classes directory of the endeca-portal.3.0.x.war. This doesn't seem to work though. If I add the liferay.home={path} in my standard portal-ext.properties file from the current liferay.home and then cut-n-paste the entire into the endeca-portal.3.0.x.war file, it will start writing the files into the new home directory but I really don't want to have all that stuff in there if I don't have to. Has anyone else tried to change the liferay.home path?
Thanks,
Sandy

For Studio installed using Weblogic, you need to copy porta-ext.properties to:
$WEBLOGIC_HOME/user_projects/domains/endeca_studio_domain/eid/studio/
Remember that you need to restart Studio Weblogic domain after any change on the properties file.

Trying to change NAT connection from moderate NAT connection to an open NAT connection for XBOX LIVE

Hi, I have a Linksys Wireless-N Broadband Router/WRT160Nv2 and I have been trying to change my NAT connection from a moderate NAT connection to a open NAT connection for my Xbox Live on my Xbox 360. I can sign into my Xbox Live account but it is working on a moderate NAT connection. I have already enabled the UPnP and put in the proper port numbers. After doing that I signed into my Xbox Live on my Xbox 360 and tested my Xbox Live connection and still it says that I a moderate NAT connection. I do not know what elso to do and I would greatly appreciate step by step help from anybody who knows what they are doing. PLEASE HELP ME AS SOON AS POSSIBLE!!!!
Thank you

A known issue with Linksys routers is the NAT Type 3 or anything related to dropping of Internet connectivity during play time. Network Address Translation (NAT) is the ability of a router or firewall to translate a public IP address to a private IP address and vice versa. It adds security to the network by keeping the private IP addresses hidden from the outside world.
Here is the link, which will you in resolving the concern: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=2902de6218ed4dc1a4c595595ca1f60a_Resolving_NAT_Typ...

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.

Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

I'm Trying to change my router ip address to match that of sling box any ideas

I'm trying to change my router IP address to match that of sling box. The airport extream will not let me or sling help change it . Any ideas

Here are the basic steps to setup port mapping on the AirPort:
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
AirPort Utility > Select the AEBSn > Manual Setup > Internet > DHCP tab
On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
Description: <enter the desired description of the host device>
Reserve address by: MAC Address
Click Continue.
MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
IPv4 Address: <enter the desired IP address>
Click Done.
2. Setup Port Mapping on the AEBSn.
AirPort Utility > Select the AEBSn > Manual Setup >Advanced > Port Mapping tab
Click the "+" (Add) button
Service: <choose the appropriate service from the Service pop-up menu>
Public UDP Port(s): <enter the appropriate UDP port values>
Public TCP Port(s): <enter the appropriate TCP port values>
Private IP Address: <enter the IP address of the host server>
Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
Click "Continue"

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

Trying to change the Tab size of SQL Server 2008 R2 ?

Been trying to change the size of the tab but it just doesnt change!
Went to Tools-Options-Text Editor-Transact-SQL
From 2 to 1.
Any ideas?

Hi Shavendra,
The Options dialog box lets you change the default behavior of the Database Engine Query Editor while you are programming Transact-SQL scripts. To display these settings, click Options on the Tools menu, expand the Text Editor folder, expand the Transact-SQL
subfolder and then click Tabs.
Tab size: Sets the distance in spaces between tab stops. The default is four spaces.
Reference: http://msdn.microsoft.com/en-us/library/bb895215.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Crashes after trying to change font in score window

Hi,
I'm having a weird problem with Logic 7.1 in my powerbook 1.33. When trying to change a font in score edit window, Logic crashes imediatly. It happens in the "Text Styles" window as well. When you click in a font name, it's gone!
Any ideas? Running in the latest Tiger with 1Gb RAM. Also, is it a problem to keep Logic 6.4 installed on the same machine?
Thanks everybody!

Do you use another machine for that task?
as a matter of fact i do, although my G4 will run classic. and LP7 is os x only, you need an older version of logic that runs in OS 9. logic won't run in classic mode.
to save your file, i suggest taking it to someone with os 9 and an old version of logic. in fact, if you emailed it to me i could do it. someone on this forum suggested buying an older machine with USB (or getting a USB card) just for such emergencies. i have retained my old G3 powerbook with logic 5.5. it has a PCMCIA USB card on it so i can put in my XSkey.
having to do this is stupid though. let's see, to fix this logic score display bug, we have to buy an old computer that can boot up in classic, open and resave the corrupted song in that. what a ridiculous work around.
when I open older socres created on my previous mac-printer setup, it's all messy, dynamics, articulations and text (not to mention the wrong fonts).
yet another reason we need some logic score updating action. the reason your score looks funny will be due to the fact that you probably resized your score using page setup - ie using your printer driver. the correct way to do this is by opening the instrument set display box and resizing there.
fonts not being displayed will be down to whatever fonts you have available in your system, so if you do not have the fonts available then they cannot be displayed. another reason your display will look strange, particularly in terms of where your articulations and dynamics are placed in the score may have to do with how you inserted them in the first place. in logic, you have to be very careful to insert your dynamics, articulations etc on the correct stave (it will be highlighted blue when you select the object) and in the correct midi position. check to see if they are in your messy score by selecting the object (ie dynamic articulation or whatever) and opening the event editor. is it where it should be?
another trick if the display is completely screwed in logic 7 is to cut an object at a barline. (though obviously not in the middle of a note). this forces logic to recalculate the score display.
my advice if you want to have soft copies of previous scores is to create pdf's of them. i almost never print directly from logic (unless i am in a terrible rush), i create pdf's first. that way you won't run in to the display problem. you can do this easily in os 9 if you have laserwirter 8 selected in chooser. you can then save to file and choose acrobat pdf.
let me know if you want me to rescue your logic song that won't open.

HT5625 My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

My daughter and I were both on same Apple ID. We are trying to change hers but when we do, it says her email is already associated with an Apple ID but when we try to get the password, it says that it could not be verified. How do we correct this?

Not from your end. Click here and ask the iTunes Store staff for assistance.
(126716)

HT201303 I tried to change my email address on the apple ID but now when I try to buy an app or film it still comes up with my old email address and won't accept my password to buy anything. My old email address is no longer in use and can not be access

I tried to change my email address ID , but now when I try to buy an app or music it still shows my old email address and won't accept my password which I did not change. What can I do as I can't download anything ?

What id shows in Settings > iTunes & App Store ? If it's the old one then tap on it and log out of it and then log in with the updated version

Error while trying to change or save as query in query designer

Hi ,
When we are trying to change or do a save as to a query in the query designer,it is giving us an error stating"'An unexpected object variable or with block variable not set'error occured in wdbrlog 1 error(s) are logged".
We have searched in SDN for the same error and found some OSS notes(Notes 571831,575434) should be implemnted but those notes seem old.We are using BI 7.0 version.
Could anyone please suggest??
Thanks,
Bhagyarekha.

What is your front end SP level ?

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud.

I am trying to change the email address associated with my existing account to free up my university email address for use in obtaining Creative Cloud. Every time I go to the account settings of my existing account (which currently uses my university email, as I set it up years ago and had no idea it'd eventually cause problems), I enter a different email to use for that account but I continuously receive an error message saying "account changes cannot be saved." It makes me think that it's because the email isn't verified (funny, it actually is verified since it has been the alternate email on the old account for years), but when I click the "send verification email" nothing happens (that is, no email is sent to that other email address).
Anyway, my university is now requiring that faculty create new accounts using our university email addresses in order to register/use Creative Cloud. Am I able to delete my old account, or can anyone help me actually change the email address associated with my old account without getting a "changes can't be saved" error?

This is an open forum, not Adobe support... you need Adobe support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
or
Make sure that EVERY DETAIL is the same in every place you enter your information
-right down to how you spell and punctuate the parts of your name and address
Change/Verify Account https://forums.adobe.com/thread/1465499 may help
-Credit card https://helpx.adobe.com/utilities/credit-card.html
-email address https://forums.adobe.com/thread/1446019
-http://helpx.adobe.com/x-productkb/global/didn-t-receive-expected-email.html

Trying to change OC4J 10.1.3 ports

Similar Messages

Maybe you are looking for