Trying to configure Rational Purify with weblogic 8.1

Hi ,
I am trying to check for memory leaks in the webservices which have been developed on weblogic 8.1 using rational purify. Can someone guide me about changes which I need to make in my configuration file to make this happen ?

Bob,
Thanks for the response, I did  not execute it but will i thought it would do it in v$session on startup.  The psr -v output for that service is:
       Group ID: WIZGRP_1, Server ID: 90
      Machine ID: devvm04
      Process ID: 23463, Request Qaddr: 790134787, Reply Qaddr: 790167556
     Server Type: USER
       Prog Name: /home/hems/prod/appdir/SQLSERV
      Queue Name: SQLSERVQ_1a
         Options: RESTARTABLE
  Max # Restarts: 10
Restart Command: /home/hems/prod/scripts/restart.sh
    Grace Period: 0 hour 1 mins
In mem Q/thread: max length 0
      Generation: 1, Max message type: 1073741824
   Creation time: Thu 01 Aug 2013 01:59:36 PM EDT
         Up time: 0:00:21
   Requests done: -
       Load done: -
  Current Status: ( - )
Oracle client is
devvm04:/home/hems/prod/appdir>tnsping
TNS Ping Utility for Linux: Version 12.1.0.1.0 - Production on 01-AUG-2013 14:02:27
Copyright (c) 1997, 2013, Oracle.  All rights reserved.
Also ran with 11.2.3
Jim

Similar Messages

  • How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

    How to configure IIS webserver with weblogic so that I can
    invoke servlets without the .wlforward extension
    As per the documentation iisforward.dll is registered as a filter and .wlforward
    has also been
    included as a special file type. However this requires me to key-in ".wlforward"
    after my servlet name.
    What I want is something like this
    http://iis/MyServlet
    Please help me find a solution to this
    Thanks,
    Rishi

    I am able to invoke the servlet without the wlforward extension now.
    However, now I am required to add /weblogic before the servlet
    name otherwise it does not execute the pathtrim property.
    I have tried with the pathprepend thing also.
    Can we get rid of the /weblogic part also. I just want to execute
    my servlet as http://iis/myServlet.
    Your help in this regard is greatly appreciated...
    Thanks..
    "Rishi" <[email protected]> wrote:
    >
    Thanks for the reply Kumar.
    I did follow the instructions as given in the Weblogic documentation
    The documentation said to add iisforward.dll as a filter service
    and register .wlforward as a special
    file type to be handled by iisproxy.dll. For this,
    while configuring the IIS server in the Home Directory tab
    I added an extension ".wlforward" and the executable as
    iisproxy.dll. Is this the way it should have been done...
    I also modified the iisproxy.ini file as per the documentation.
    I have added the WLForwardPath property and set it to /weblogic.
    My server works fine when I give the url as
    http://iis/myServlet.wlforward
    but it does not work for
    http://iis/myServlet and this is the way i'd want it to work.
    Please tell me if I am missing something on the configuration part
    and if there is something special that needs to be done. I shall
    be grateful to you.
    Kumar Allamraju <[email protected]> wrote:
    http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
    Rishi wrote:
    How to configure IIS webserver with weblogic so that I can
    invoke servlets without the .wlforward extension
    As per the documentation iisforward.dll is registered as a filter
    and
    .wlforward
    has also been
    included as a special file type. However this requires me to key-in".wlforward"
    after my servlet name.
    What I want is something like this
    http://iis/MyServlet
    Please help me find a solution to this
    Thanks,
    Rishi

  • Steps to Integrate Rational Purify with SunoneApplicationServer6.5 EE

    Hi All,
    Iam in the process of integarting Sunone Application Server6.5 with Rational Purify.
    Please tell me the steps to acheive the same.
    Thanks
    Raju

    See if you can get some ideas from
    Note:175870.1

  • How to configure XSQL-Servlet with Weblogic 6.0

    Hi,
              what are the steps to configure the xsql-servlet? I downloaded ora xdk 9.2 and getting the following error when requesting demo via url= http://localhost:7001/xsql/home.xsql:
              Oracle XDK Java 9.2.0.6.0 Production
              XSQL-001: Cannot locate requested XSQL file. Check the name.
              In general, I can't run either demo that came with XDK... please help!
              

    Vipul,
    Can you try adding them as the first entry in the classpath in the
    startWebLogic.smd file.
    Raj Alagumalai

  • Trying to configure base station with an iBook G4

    Hi there,
    I've purchased an Airport Extreme Base station to provide wireless internet access to my iBook G4.
    I can connect to the internet just fine, and have no problem loading web pages/email/etc.
    However, if I try to configure the base station when using the Airport Admin Utility, I get a long wait, followed by a request for the password (I'm entering "public" here), another long wait, followed by the message "The Airport Admin utility was unable to read the configuration of the selected base station. An error occurred while reading the configuration."
    I've tried hard resetting the base station, restarting my computer, and unpluging everything and plugging it all back in again.
    Any help would be greatly appreciated.
    iBook G4 14"   Mac OS X (10.4.6)  

    Brian, Welcome to the discussion area!
    Try connecting the iBook to the AirPort Extreme base station (AEBS)'s LAN Ethernet port and configuring it.

  • Apache2.2 Plugin configuration issue with Weblogic 9.2

    Hi All,
    We are trying to configure apache plugin for weblogic 9.2 (Apache Proxying for Weblogic) in Solaris Spark. When we are testing the httpd.conf configuration using apachectl configtest we are getting following error.
    httpd: Syntax error on line 80 of /data/httpserv/apache-2.2.10/conf/httpd.conf: Cannot load /data/httpserv/apache-2.2.10/modules/mod_wl_22.so into server: ld.so.1: httpd: fatal: /data/httpserv/apache-2.2.10/modules/mod_wl_22.so: wrong ELF class: ELFCLASS32
    We were using the mod_wl_22.so file provided for Solaris/Spark in the link mentioned below.
    http://download.oracle.com/otn/bea/weblogic/server103/server103_apacheplugins.zip
    Apache 2.2.10 installation that we are using is a 64-bit version. It seems mod_wl_22.so provided in the above link for solaris/spark is a 32-bit version. Is it possible to get a 64bit version of this library?
    Anybody has worked on same/similar kind of issues? Is there any workaround, for this?
    Input/thoughts from anyone is highly appreciated

    Hello, I'm not an expert at confugring Apache and WebLogic servers. Hopefully someone else who does know what they are doing will reply to your question.
    I found your question because I am also working on an Apache / WebLogic install for an Ariba installation (in Windows 7).
    However I did support a configuration of WebLogic on Solaris with Apache. I remember that the guy who did the Apache install mentioned that Apache needed to be compiled correctly - below is what he sent:
    Apache server compilation options:
    ./configure prefix=/usr/local/apache_2.0.63 enable-mods-shared=all enable-ssl=shared enable-ssl with-ssl=/usr/local/ssl enable-proxy enable-proxy-connect enable-proxy-http --with-mpm=worker
    I am still looking into the differences between the plugins (mod 22 so vs mod 20 so). Navigating the Oracle download options can be bewildering. I found the link to download a full zip file of plugins (below).
    Oracle WebLogic Server Web Server Plugins 1.1
    http://www.oracle.com/technetwork/middleware/ias/downloads/wls-plugins-096117.html
    I clicked on "all versions."
    Does the WLSPlugin1.1-64bitApache2.2-solaris-sparc.zip contain what you need?
    Great luck to you!
    -Tom Tobey

  • Configureing Oracle 9i Reports with Weblogic

    Hello
    Did anyone so far tried to configure Oracle Reports with another application server (like Weblogic) than iAS? If yes, can you please tell me what is invloved in doing something like this (if its doable anyway)?
    thanks
    Argyris

    In some of our applications we are using Reports 6.0 and we have no problems with 9.2 DB.

  • Newbie trying to configure xfi with virtual

    hi,i'm trying to configure my soundcard with virtual dj so that i can monitor through the headphones one track whilst another is playing thru the speakers. I'm not sure how to do this - have selected Asio in 'soundcard' on virtual dj - am then able to select between running master thru channels and 2, with phones thru 3 and 4 or vice versa.How do i effect this in the console launcher please?Am in audio creation mode but having no luck!?thnaksBArry

    anyone? technical support is ringing out.thanks

  • OIM 9101 with Weblogic 10.3.0 - basic query

    Hi All
    I am trying to install OIM 9101 with Weblogic 10.3.0 and Oracle DB 11.1.0.6 on Windows 2003 (64-bit) and Sun JDK 1.6.0_10 (Oracle certified configuration).
    The problem is that my weblogic fails to start-up as soon as I enter the weblogic user-name on the command prompt. It says that the weblogic is not able to use some binary to pick-up the userID. This may be some issue related to Win 64bit environment.
    To overcome this issue, I hard coded the userID and password for weblogic in Weblogic's SetDomainEnv.cmd file.
    I want to know whether including the userID and password in the weblogic's file can result in OIM installation failure.
    Please help.

    I personally don't think your OIM installation will fail because of that as OIM installation only execute some of the WLS configuration script to install OIM applications into WLS.

  • Issue while integrating external LDAP with weblogic

    Hi,
    i am trying integrating external LDAP (OpenLdap) with weblogic 10.3. I created a provider and provided required credentials and able to see users and group of the LDAP into the weblogic console. I am also able to login in the weblogic console with the users available in the LDAP after assigning the admin role to the ldap group. But i when i see the user's property (by clicking on the user in the admin console) it only shows the tabs for General, Password and Group only. on the other hand if i see the users from DefaultAuthenticator, it shows the Attribute tab apart from the General, Password and Group.
    Can anyone let me knwo how can we get the Attribute tab for the Ldap users.
    thx,
    Ajay

    Hi Ajay
    By default Weblogic has READ ONLY adapters for any External Security Providers that are configured like any AD Providers. READ ONLY means, you can only read the data from the ldap but not modify it, hence may be its not showing the Attributes tag. For Default Authenticator, see the first paragraph note in Attributes tab, that says the same thing. NOW, may be WLS can atleast show Attributes in READ only format, but it needs some sort of mappings to be defined. Say on Weblogic side, we have like firstName, lastName which on any typical AD will be like sn (surname = lastname), givenname (firstname) etc etc. This mapping is tough to generalize.
    One thing for sure is, from Weblogic you cannot modify or edit any attributes for any user in external AD. If you really want to get those attributes, you may need to use some javax.ldap apis or some 3rd party ready to use tools/apis. I remember Weblogic Portal has a facility to configure a xml file that defines attributes mapping and get all attributes for any user. But again thats in Weblogic Portal product and not part of weblogic server.
    If you have any SOA Software, they have some utilities for the same.
    Thanks
    Ravi Jegga

  • Configure airport express with mac book air

    I am trying to configure airport express with a Mac Book Air, without success; the program is installed, but then, nothing appears to configure Airpor Express...
    Can I get any help? Thank you
    António

    Hello!
    I´m sorry it took so long to reply, but I´m new to these blogs; and I´ve been travelling a lot... Anyway, I was able to configure Airport Express, but I was told I could use it to expand my wireless network inside my house; which I found it´s not possible.
    So, I´m returning my Airport Express to the store tomorrow and try to figure out a way to extend my wireless in any other way.
    Any sugestion? Big houses are a problem...
    Best regards, and once again thank you!
    Antonio

  • Configuring multiple instances of weblogic server 7.0 on single machine

    Hi,
    I am trying to configure multiple instances of weblogic server 7.0 on single machine
    ( sun Solaris 7). I tried to create everytime new domain. Can anybody help me.
    Thanks in advance.
    Ravi

    You can have several servers under one domain. No need to create a new
    domain for each server. Just configure a server and make sure they are
    listening on different ports. you are all set.
    Kumar
    ravikiran wrote:
    Hi,
    I am trying to configure multiple instances of weblogic server 7.0 on single machine
    ( sun Solaris 7). I tried to create everytime new domain. Can anybody help me.
    Thanks in advance.
    Ravi

  • Trying to configure WRT54GL Wireless Router

    I am new to networking and just purchased a WRT54GL V1.1 to allow wireless networking with my laptop. I am trying to configure the router with my desktop. I have Windows XP Pro and an Earthlink DSL modem (Zy-XEL P-600 Series).  The setup CD stopped at the "Confirm New Settings" screen saying "The router is not available to connect to the internet." I have tried resetting and recycling power on the router and modem. Support from Linksys has been poor due to the earthquake.  Any help is appreciated.

    There can be issues when going from a direct DSL connection to a router -> DSL setup.  The original direct DSL connection setup routine often configures your computer to interact with the DSL modem, providing the username and password to your ISP to allow a connection.  With a router, that now must provide the user name/password through the PPPoE configuration setup within the router.
    I've seen cases where I had to run Microsoft's Windows XP Network Fix utility on the computer to get the TCP/IP stack working properly again.

  • Configuring a zone with virtual ip [eth0:1]

    Hi,
    i have tried to configure a zone with virtual ip address,but i couldn't.i was getting error.i have selected shared ip.is it possible to do that,did i miss something or do i need any particular release for that.
    Thanks,

    You can't change the IP for a shared IP zone from within the zone.
    You edit the zone config from the global zone and reboot the zone.

  • How to configure Oracle 8 to work with Weblogic portal4.0

    Hi! I'm trying to configure my portal to work with oracle8i using thin driver.I've set classes12.zip in the classpath.But if I set the DATABASE=ORACLE_OCI value inthe set-environment.sh file the server does not start.Pls help.

    Here's the error log it throws for the problem:
    : 'Fatal initialization exception
    Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.R
    DBMSException: An error occured creating a database connection for the realm.]
    java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSExcepti
    on: An error occured creating a database connection for the realm.]
    at weblogic.security.acl.Realm.getRealm(Realm.java:91)
    at weblogic.security.acl.Realm.getRealm(Realm.java:62)
    at weblogic.security.SecurityService.initializeRealm(SecurityService.jav
    a:258)
    at weblogic.security.SecurityService.initialize(SecurityService.java:115
    at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
    at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
    at weblogic.Server.main(Server.java:35)
    '>

Maybe you are looking for