Trying to connect db server from another server

Hello team,
Today i tried to connect db server(Named instance) from another server and that was failed. im getting below error
any one help on this will be appreciated.
unable to check connection to the repository The Tcp/Ip connection to the host server, port 1433 has failed.
Error: "connection refused: connect. verify the connection properties. Make sure that an instance of sql server is running on the host and accepting Tcp/Ip connections at the port. make sure that Tcp connections to the port are not blocked bya firewall.

Hello,
Normally "Connection Refused" is caused by firewalls actively closing the requests. Also, please note that by default named instances use dynamic ports and do not listen on 1433. If you are using dynamic ports, make sure the browser service is started and
that UDP 1434 is allowed for browser service communication.
Sean Gallardy | Blog |
Twitter

Similar Messages

Connecting to a NT server from another server

Hello, All. I was wondering If anyone knew the best and more efficient way to connect to a NT server from another server. Once the connection is made I need to be able to execute .cmd file on the NT server.
Thanks
Donald

I doubt if there is a "best" way. Do you want to do this programatically or interactively?
Interactive methods include:
Run a terminal server on the NT box and telnet to it.
Run a webserver on the NT box and create some simple server side script to execute the .cmd
Programatically:
Create a simple server to listen on a port, recieve connections, and execute command that are passed. (This is signicantly more arduous than the interactive methods, especially if you want some user authentication).
Use RMI or CORBA

Hi, i am trying to open and view a report that comes from another server with different odbc connection

hi, i am trying to open and view a report that comes from another server with different odbc connection
i created a crystal report for a mysql database on my machine and everything works great
but we have other reports that come from other machines with different odbc connection
and this its not working when opens the report asks for credentials
and i cannot use the remote ip for these reports that come from other machine
question
if i cannot connect to remote ip to open the report
for each report i have to create a database the report database on my machine and then open the report ?
or there is some other way to open the report ?
i am using visual studio 2013 and mysql and
<add key="MYSQLODBCDRIVER" value="{MySQL ODBC 5.3 UNICODE Driver}"/>
thanks

short
i have a report that it was created on another server with a specific dsn
now i am trying to open the report on my machine
the database from the other server does not exist on my machine
the server machine where the report was created the ip its not accessible
question ?
can i open the report on my machine or its impossible ?
thanks

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

How can I move the ODI Work Repository from one server to another server?

How can I move the ODI Work Repository from one server to another server?

Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you.

Problem in accessing the media files from another server

Currently I am working in a project with streaming video on demand and using FMS 4.5.
Let’s say the FMS is installed on one machine say ‘121.123.35.34’ and there is another server ‘100.54.88.222’ where all the media files belong. Now we need to point to this third server to play videos from FMS.I have done the below changes:
In the fms.ini file: set the VOD_DIR2 = \\100.54.88.222\myvideos
In the application.xml: Added the stream: <Streams>/hr;${VOD_DIR2}</Streams>
From my application accessing the path of flv as:source= “rtmp:// 121.123.35.34:1935/vod/hr/test” . Not able to access the video.
Note: If I will point to say ‘C:hrvideos’ in VOD_DIR2, then I am able to access the videos using the same URL.
I also tried mapping the shared path to the FMS machine and then given the mapped drive path in the VOD_DIR2, but this also doesn’t work.
Please let me know:
If we need to configure any other parameter to stream videos from another server.
VOD_COMMON_DIR: I modified this similar TO VOD_DIR to location 'C:hrvideos', I am able to stream the videos using rtmp, but not abl eto stream with http.
          Please let me know can we stream using http also as we need this to run f4m manifest file.
          http://121.123.35.34:8134/vod/hr/sample.mp4.
          http://121.123.35.34:8134/vod/hr/sample.f4m
Thanks,
Anjali

Hi Shiven,
I followed the steps suggested by you:
1) Changed the stream:
<Streams>/hr;${VOD_DIR2}</Streams> to<Streams>/;${VOD_DIR2}</Streams>
But not able to access the video with rtmp:// 121.123.35.34:1935/vod/test
2) For http streaming, changes the HttpStreamingContentPath in hds-vod in the httpd config file, and tried to stream the video like:
http:// 121.123.35.34:8134/vod/test.mp4 or
http:// 121.123.35.34:8134/hds-vod/test.mp4
But not able to load the video.
Please suggest?
Thanks & Regards,
Anjali Rawat

Error while duplicate database from one server to another server

Hi there,
I am practicing duplicate database from one single database server to another server. Hardware and driver path on 2 machines is the same. Here are my steps:
--------------------- Clone site:
1. modify listener.ora with content:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
ADR_BASE_LISTENER = /u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = orcl)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(SID_NAME= orcl)
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON
2. stop and start listener again, message show like :
Service “orcl” has 1 instance(s).
Instance “orcl”, status UNKNOWN, has 1 handler(s) for this service…
The command completed successfully
3. create pfile from spfile.
4. shutdown and startup nomount with pfile is new pfile create from step 3.
--------------------------------------- Source site
1. modify tnsnames.ora with content like:
VVCOREDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = vvcoredb)
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT=1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
2. run command from rman like these:
rman> connect target sys@vvcoredb
rman> target database Password:
rman> connect auxiliary sys@orcl
rman> auxiliary database Password:
rman> DUPLICATE TARGET DATABASE to orcl from active database spfile nofilenamecheck;
Then the result show below:
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 17:44:12
RMAN-03015: error occurred in stored script Memory Script
RMAN-04014: startup failed: ORA-01261: Parameter db_recovery_file_dest destination string cannot be translated
ORA-01262: Stat failed on a file destination directory
Linux-x86_64 Error: 2: No such file or directory
I don't know what wrong with my pfile? I specify correct my pfile on clone site like this:
orcl.__db_cache_size=1476395008
orcl.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orcl.__oracle_base='/u01/app/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=1342177280
orcl.__sga_target=1979711488
orcl.__shared_io_pool_size=0
orcl.__shared_pool_size=436207616
orcl.__streams_pool_size=0
*.audit_file_dest='/u01/app/oracle/admin/orcl/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_name='orcl'
*.db_recovery_file_dest='/u01/app/oracle/flash_recovery_area/vvcoredb'
*.db_recovery_file_dest_size=4070572032
*.diagnostic_dest='/u01/app/oracle'
*.dispatchers='(PROTOCOL=TCP) (SERVICE=orclXDB)'
*.memory_target=3313500160
*.open_cursors=300
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.undo_tablespace='UNDOTBS1'
Please suggest me do i miss some steps when try to duplicate database?
Any suggestions are welcome.
Thanks in advance!
P/s: Sorry for my bad English.

Oh god, it worked. Thank you. But i got another problem like this:
duplicate target database to orcl from active database spfile set "db_recovery_file_dest" = "/u01/app/oracle/flash_recovery_area/vvcoredb" nofilenamecheck;
Starting Duplicate Db at 24-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=63 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
'/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora' ;
sql clone "alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''";
executing Memory Script
Starting backup at 24-SEP-12
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=74 device type=DISK
Finished backup at 24-SEP-12
sql statement: alter system set spfile= ''/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora''
contents of Memory Script:
sql clone "alter system set db_name =
''ORCL'' comment=
''duplicate'' scope=spfile";
sql clone "alter system set db_recovery_file_dest =
''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment=
'''' scope=spfile";
shutdown clone immediate;
startup clone nomount;
executing Memory Script
sql statement: alter system set db_name = ''ORCL'' comment= ''duplicate'' scope=spfile
sql statement: alter system set db_recovery_file_dest = ''/u01/app/oracle/flash_recovery_area/vvcoredb'' comment= '''' scope=spfile
Oracle instance shut down
connected to auxiliary database (not started)
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
contents of Memory Script:
sql clone "alter system set db_name =
''VVCOREDB'' comment=
''Modified by RMAN duplicate'' scope=spfile";
sql clone "alter system set db_unique_name =
''ORCL'' comment=
''Modified by RMAN duplicate'' scope=spfile";
shutdown clone immediate;
startup clone force nomount
backup as copy current controlfile auxiliary format '/u01/app/oracle/oradata/vvcoredb/control01.ctl';
restore clone controlfile to '/u01/app/oracle/recovery_area/vvcoredb/control02.ctl' from
'/u01/app/oracle/oradata/vvcoredb/control01.ctl';
alter clone database mount;
executing Memory Script
sql statement: alter system set db_name = ''VVCOREDB'' comment= ''Modified by RMAN duplicate'' scope=spfile
sql statement: alter system set db_unique_name = ''ORCL'' comment= ''Modified by RMAN duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 3307048960 bytes
Fixed Size 2217872 bytes
Variable Size 1811941488 bytes
Database Buffers 1476395008 bytes
Redo Buffers 16494592 bytes
Starting backup at 24-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying current control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 09/24/2012 18:42:09
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 09/24/2012 18:42:09
ORA-17628: Oracle error 19505 returned by remote Oracle server
I have a comment that source site doesn't have flash_recovery_area, instead it's name is recovery_area, is it problem?
Edited by: 788420 on Sep 24, 2012 4:44 AM

Why is Mail trying to connect to an unknown mail server (and how do I stop it)?

Hi - I'm worried that someone has hacked into my system so that it tries to connect to a fake mail server (perhaps to send spam)? I usually have the activity window open when Mail is running, and noticed that it was trying to connect to an unfamiliar mail server the other day - it was shown as an IP address whereas all the mail servers in my mail accounts have names rather than IP addresses ... so I copied the IP address down and searched for it (196.201.4.6), to find that it is run by malawi.net ... in Africa. I recently upgraded to Mac OS Lion, so initially I had figured that it was showing the mail server address differently, but I couldn't think of any reason that my email servers would be in Malawi!
By now I was getting worried: I checked all my mail accounts to be sure that something had not changed, and confirmed that none of my accounts used this mail server (or mentioned the IP address); and confirmed that the "Connecting to server "196.201.4.6"" activity message only appeared when I first reconnected to the internet (i.e. now when I manually clicked on "get mail") ... which suggests to me that it is a hidden process somewhere?
I don't have a virus checker, but downloaded ClamXav and ran a check on my user folders ... but found nothing.
Any thoughts on what this might be, or - if it is something malicious or externally controlled - how I can remove it?
Thanks - andy

Hi - "display remote images in HTML messages" was already deselected, so I don't think it was an HTML message connecting.
But your response made me wonder about whether it was something else in an old email that was causing the problem - I had a search and found some emails from back in 2006 (when I did some work in Malawi for CARE) that were from the mail server (mailer.malawi.net = 196.201.4.6) that has been appearing. However, I still don't understand why (six years later) Mail is now trying to connect to this server ... I'm pretty sure that it never used to happen (and I have been a full-time Mac user since 2003), as I always have the activity window open and would have noticed, so it is only since I upgraded to Lion last week that it started. Any thoughts? I could delete/archive the old emails, but I would really like to understand what is happening?
Thanks - andy

Not able to access HTMLDB from another server running HTTP_SERVER

Hi
I had htmldb installed and running from dataabse server but then I moved APACHE server to another server. Here Apache is running from OEM 10g grid control
I set up dad.conf and marvel.conf files for connection to htmldb server. Also I created marvel directory and copied images diretory from htmldb server to this Apache server marver directory. It did not work
Here' the details from dads.conf file
Alias /i/ "/opt/oracle/product/10.2.0_oem/oms10g/Apache/marvel/images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseUsername htmldb_public_user
PlsqlDatabasePassword @BfNvzBYH8alwoDCIEVVlTPg=
PlsqlDatabaseConnectString ods1_dev.whq.ual.com TNSFormat
PlsqlNLSLanguage AMERICAN_AMERICA.WE8ISO8859P1
PlsqlAuthenticationMode Basic
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_manager.process_download
PlsqlPathAliasProcedure htmldb.wwpth_api_alias.process_download
PlsqlDefaultPage htmldb
</Location>
Also I see following errors in Apache Log
File does not exist : /opt/oracle/product/10.2.0_oem/oms10g/Apache/Apache/htdocs/portal/pls/htmldb
Please help.
Thanks
Sunil

In httpd.conf I have oracle_apache.conf file included
In oracle_apche.conf I have <oracle home>/Apache/modplsql/conf/plsql.conf included
And in plsql.conf I have
<oracle home>/Apache/modplsql/conf/dads.conf file included.
http_server is running and did not give any errors during startup

I need a shell script to move latest archivelogs from one server to another server..

Hi,
I need a shell script to move latest archivelogs from one server to another server..
Thanks&Regards,
Vel

ea816fb9-f9ea-45ac-906f-36a8315970d0 wrote:
Thanks it's really helpfull..
Now i have pasted a shell script which generates archivelog and shows latest archivelog time..
just check let me know the answer, that how i need to execute it..
# Force a logswitch to get the last archivelog to the standby host
ORACLE_SID=ORCL
ORAENV_ASK=NO
. oraenv >/dev/null 2>&1
SwitchLogfile()
# Do logswitch
RESULT=`echo "Alter system switch logfile;" | sqlplus -S / as sysdba | grep 'System altered'`
if [ "$RESULT" = "System altered." ]
then
export RETURN=1
else
export RETURN=0
fi
# Do we need to do something with this return value?
export RETURN
GetArchiveTime()
CURYEAR=`date +%Y`
echo "set heading off;" > temp.sql
echo "set termout off;" >> temp.sql
echo "select to_char(first_time,'YYYY-MM-DD HH24:MI:SS') from v\$archived_log where sequence#=(select sequence# - 1 from v\$log where status='CURRENT');" >> temp.sql
sqlplus -S / as sysdba <
spool tempres.txt
@temp.sql
quit
EOF
cat tempres.txt | grep ${CURYEAR} | grep -v grep | awk '{print $1" "$2}'
#rm -f temp.sql tempres.sql
SwitchLogfile
GetArchiveTime
You seem to have ignored Dude's VERY good advice and continue to press down this ill-advised path. If you continue this approach, you WILL have problems at the very time you do not need any additional problems. Trying to recover your production database at 2:00 in the morning is not the time to be getting errors from rman because it can't find what it needs - because you decided to move them around yourself.
Please reconsider.

I have an iPhone 4S I've been useing a sever for awhile now. Downloaded new iOS now I'm getting 403 forbidden when trying to look up anything from the server. Regular 3G works. How can I fix so I can use the server?

I have an iPhone 4S I've been useing a sever for awhile now. Downloaded new iOS now I'm getting 403 forbidden when trying to look up anything from the server. Regular 3G works. How can I fix so I can use the server?

Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.

Calling UNIX Command from another server using ODIOScommand utility

Hi,
My unix script 'runmanger' is on another server say 'St23456wer' under /u10/DV2/ofsaa/fic/xxx/bin. I want to call this 'runmanager' using ODIOSCommand. My ODI agent is installed on different server. I can ping 'St23456wer' server from ODI server. How can I call this unix script.

My only experience with this is connecting to source files on a remote linux server and the two options I was presented with were 1) creating a mount to make the files 'local', or 2) set up a new agent on the remote server.
One of the gurus may have a better answer for you.

Accept Mail from another server

We are testing a migration scenario and are running into a few issues. I have our new mail server setup with the same domain as our old. We will slowly be migrating from the old to the new, sort of like a split domain. The old server is running GroupWise 7, the new is Zimbra based.
What I am attempting to do is allow for users on Zimbra (using the same domain) to be able to send messages to users on Groupwise. So far I have been unable to find a setting in GWIA that allows me to say it is "ok" to accept email from this server. I believe that since both the Zimbra and GW servers are using the example.com domain GW is not allowing messages to go to mailboxes.
How do I setup Groupwise to allow messages from another server using the same domain?

I doubt that is it. Your GW system is set to receive messages for
@example.com and shouldn't care where they have come from. Your Zimbra
server should be set to forward to GW as a smarthost and have it forward
undeliverables to that host.
Usually, the Zimbra side is going to have problems, especially if it has all
of the addresses configured on it. It knows that it handles email for
example.com and will try to deliver it to itself, unless you do something
with undeliverables instead.
I think.......................
"dabrown ksu" <[email protected]> wrote in message
news:[email protected]..
>
> We are testing a migration scenario and are running into a few issues. I
> have our new mail server setup with the same domain as our old. We will
> slowly be migrating from the old to the new, sort of like a split
> domain. The old server is running GroupWise 7, the new is Zimbra based.
>
> What I am attempting to do is allow for users on Zimbra (using the same
> domain) to be able to send messages to users on Groupwise. So far I have
> been unable to find a setting in GWIA that allows me to say it is "ok"
> to accept email from this server. I believe that since both the Zimbra
> and GW servers are using the example.com domain GW is not allowing
> messages to go to mailboxes.
>
> How do I setup Groupwise to allow messages from another server using
> the same domain?
>
>
> --
> dabrown_ksu
> ------------------------------------------------------------------------
> dabrown_ksu's Profile: http://forums.novell.com/member.php?userid=90079
> View this thread: http://forums.novell.com/showthread.php?t=415905
>

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Loader will load images from another server, but then we get error on Bitmap operation

I'm developing an app that currently is using Loader to get images from another server. This shouldn't currently work since we are still waiting for the owner of that server to put a crossdomain file in place. However, it does work -- sort of .
Loader can load the images fine, without an error. But then the app has a feature in which we are making a larger duplicate of the image to display in a sidebar, we do this in this manner:
var myBitmap:Bitmap = Bitmap(loader.content);
and when this runs we get a Flash player security error 2122, sandbox violation.
So while I'm hoping all this will fix itself when the crossdomain.xml file is put in place, I'm confused as to why we only get the sandbox error when we make a Bitmap from the image, and not when we initially try to retrieve the image.
(Incidentally: is there a better way to make a "copy" of an image loaded by a Loader, and then change its width and height for simultaneous display in another part of the stage? I don't need to change its actual dimensions -- I just need to change its display width and height.)
Thanks!

The sandbox allows viewing, not editing from another server without a crossdomain.
So, when you try to load it up, it loads it, but "read-only" and gives you an error when you try to "edit" it by making a new Bitmap out of it.
This should resolve itself once that crossdomain is in place.
||EDIT||
I just realized I should clarify my statement a little more.
When you load images from another server without a crossdomain, it allows the load for display only. When you try to load data, it will fail. This is because, XML data, or some other type of data is editable by default, and images are only viewable by default. So, the image fails when you try to convert it into an editable form.

Trying to connect db server from another server

Similar Messages

Maybe you are looking for